| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This fixes an odd bug found on a Dell PowerEdge 1850/0RC130
(BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask
would fail with:
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO
The issue was the Xen-SWIOTLB was allocated such as that the end of
buffer was stradling a page (and also above 4GB). The fix was
spotted by Kalev Leonid which was to piggyback on git commit
e79f86b2ef9c0a8c47225217c1018b7d3d90101c "swiotlb: Use page alignment
for early buffer allocation" which:
We could call free_bootmem_late() if swiotlb is not used, and
it will shrink to page alignment.
So alloc them with page alignment at first, to avoid lose two pages
And doing that fixes the outstanding issue.
CC: stable@kernel.org
Suggested-by: "Kalev, Leonid" <Leonid.Kalev@ca.com>
Reported-and-Tested-by: "Taylor, Neal E" <Neal.Taylor@ca.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
gref->gref_id is unsigned so the error handling didn't work.
gnttab_grant_foreign_access() returns an int type, so we can add a
cast here, and it doesn't cause any problems.
gnttab_grant_foreign_access() can return a variety of errors
including -ENOSPC, -ENOSYS and -ENOMEM.
CC: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
On 32 bit systems a high value of op.count could lead to an integer
overflow in the kzalloc() and gref_ids would be smaller than
expected. If the you triggered another integer overflow in
"if (gref_size + op.count > limit)" then you'd probably get memory
corruption inside add_grefs().
CC: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The multiplications here can overflow resulting in smaller buffer
sizes than expected. "count" comes from a copy_from_user().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
If highmem pages are requested from the balloon on a system without
highmem, the implementation of alloc_xenballooned_pages will allocate
all available memory trying to find highmem pages to return. Allow
low memory to be returned when highmem pages are requested to avoid
this loop.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
When mapping a foreign page with xenbus_map_ring_valloc() with the
GNTTABOP_map_grant_ref hypercall, set the GNTMAP_contains_pte flag and
pass a pointer to the PTE (in init_mm).
After the page is mapped, the usual fault mechanism can be used to
update additional MMs. This allows the vmalloc_sync_all() to be
removed from alloc_vm_area().
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
[v1: Squashed fix by Michal for no-mmu case]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/cleanups-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: use static initializers in xen-balloon.c
Xen: fix braces and tabs coding style issue in xenbus_probe.c
Xen: fix braces coding style issue in xenbus_probe.h
Xen: fix whitespaces,tabs coding style issue in drivers/xen/pci.c
Xen: fix braces coding style issue in gntdev.c and grant-table.c
Xen: fix whitespaces,tabs coding style issue in drivers/xen/events.c
Xen: fix whitespaces,tabs coding style issue in drivers/xen/balloon.c
Fix up trivial whitespace-conflicts in
drivers/xen/{balloon.c,pci.c,xenbus/xenbus_probe.c}
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include <linux/module.h>
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include <linux/module.h>
net: sch_generic remove redundant use of <linux/module.h>
net: inet_timewait_sock doesnt need <linux/module.h>
...
Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
net: xen-netback: use API provided by xenbus module to map rings
block: xen-blkback: use API provided by xenbus module to map rings
xen: use generic functions instead of xen_{alloc, free}_vm_area()
|
|
Things like THIS_MODULE and EXPORT_SYMBOL were simply everywhere
because module.h was also everywhere. But we are fixing the latter.
So we need to call out the real users in advance.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
Previously these drivers just got module.h implicitly, but we
are cleaning that up and it will be no longer. Call out the
real users of it.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier
genirq: Fix fatfinered fixup really
genirq: percpu: allow interrupt type to be set at enable time
genirq: Add support for per-cpu dev_id interrupts
genirq: Add IRQCHIP_SKIP_SET_WAKE flag
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
dp83640: free packet queues on remove
dp83640: use proper function to free transmit time stamping packets
ipv6: Do not use routes from locally generated RAs
|PATCH net-next] tg3: add tx_dropped counter
be2net: don't create multiple RX/TX rings in multi channel mode
be2net: don't create multiple TXQs in BE2
be2net: refactor VF setup/teardown code into be_vf_setup/clear()
be2net: add vlan/rx-mode/flow-control config to be_setup()
net_sched: cls_flow: use skb_header_pointer()
ipv4: avoid useless call of the function check_peer_pmtu
TCP: remove TCP_DEBUG
net: Fix driver name for mdio-gpio.c
ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
ipv4: fix ipsec forward performance regression
jme: fix irq storm after suspend/resume
route: fix ICMP redirect validation
net: hold sock reference while processing tx timestamps
tcp: md5: add more const attributes
Add ethtool -g support to virtio_net
...
Fix up conflicts in:
- drivers/net/Kconfig:
The split-up generated a trivial conflict with removal of a
stale reference to Documentation/networking/net-modules.txt.
Remove it from the new location instead.
- fs/sysfs/dir.c:
Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
with Eric Biederman's changes for tagged directories.
|
|
'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/drivers-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xenbus: don't rely on xen_initial_domain to detect local xenstore
xenbus: Fix loopback event channel assuming domain 0
xen/pv-on-hvm:kexec: Fix implicit declaration of function 'xen_hvm_domain'
xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel
xen/pv-on-hvm kexec: update xs_wire.h:xsd_sockmsg_type from xen-unstable
xen/pv-on-hvm kexec+kdump: reset PV devices in kexec or crash kernel
xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports
xen/pv-on-hvm kexec: prevent crash in xenwatch_thread() when stale watch events arrive
* 'stable/drivers.bugfixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/pciback: Check if the device is found instead of blindly assuming so.
xen/pciback: Do not dereference psdev during printk when it is NULL.
xen: remove XEN_PLATFORM_PCI config option
xen: XEN_PVHVM depends on PCI
xen/pciback: double lock typo
xen/pciback: use mutex rather than spinlock in vpci backend
xen/pciback: Use mutexes when working with Xenbus state transitions.
xen/pciback: miscellaneous adjustments
xen/pciback: use mutex rather than spinlock in passthrough backend
xen/pciback: use resource_size()
* 'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/pci: support multi-segment systems
xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs.
xen/pci: make bus notifier handler return sane values
xen-swiotlb: fix printk and panic args
xen-swiotlb: Fix wrong panic.
xen-swiotlb: Retry up three times to allocate Xen-SWIOTLB
xen-pcifront: Update warning comment to use 'e820_host' option.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/p2m/debugfs: Make type_name more obvious.
xen/p2m/debugfs: Fix potential pointer exception.
xen/enlighten: Fix compile warnings and set cx to known value.
xen/xenbus: Remove the unnecessary check.
xen/irq: If we fail during msi_capability_init return proper error code.
xen/events: Don't check the info for NULL as it is already done.
xen/events: BUG() when we can't allocate our event->irq array.
* 'stable/mmu.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: Fix selfballooning and ensure it doesn't go too far
xen/gntdev: Fix sleep-inside-spinlock
xen: modify kernel mappings corresponding to granted pages
xen: add an "highmem" parameter to alloc_xenballooned_pages
xen/p2m: Use SetPagePrivate and its friends for M2P overrides.
xen/p2m: Make debug/xen/mmu/p2m visible again.
Revert "xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set."
|
|
.. we check whether 'xdev' is NULL - but there is no need for
it as the 'dev' check is done before. The 'dev' is embedded in
the 'xdev' so having xdev != NULL with dev being being checked
is not going to happen.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
There are three different modes: PV, HVM, and initial domain 0. In all
the cases we would return -1 for failure instead of a proper error code.
Fix this by propagating the error code from the generic IRQ code.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The list operation checks whether the 'info' structure that is
retrieved from the list is NULL (otherwise it would not been able
to retrieve it). This check is not neccessary.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
In case we can't allocate we are doomed. We should BUG_ON
instead of trying to dereference it later on.
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[v1: Use BUG_ON instead of BUG]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Just in case it is not found, don't try to dereference it.
[v1: Added WARN_ON, suggested by Jan Beulich <JBeulich@suse.com>]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
.. instead use BUG_ON() as all the callers of the kill_domain_by_device
check for psdev.
Suggested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
This adds a mechanism to resume selected IRQs during syscore_resume
instead of dpm_resume_noirq.
Under Xen we need to resume IRQs associated with IPIs early enough
that the resched IPI is unmasked and we can therefore schedule
ourselves out of the stop_machine where the suspend/resume takes
place.
This issue was introduced by 676dc3cf5bc3 "xen: Use IRQF_FORCE_RESUME".
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1318713254.11016.52.camel@dagon.hellion.org.uk
Cc: stable@kernel.org (at least to 2.6.32.y)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The balloon driver's "current_pages" is very different from
totalram_pages. Self-ballooning needs to be driven by
the latter. Also, Committed_AS doesn't account for pages
used by the kernel so:
1) Add totalreserve_pages to Committed_AS for the normal target.
2) Enforce a floor for when there are little or no user-space threads
using memory (e.g. single-user mode) to avoid OOMs. The floor
function includes a "min_usable_mb" tuneable in case we discover
later that the floor function is still too aggressive in some
workloads, though likely it will not be needed.
Changes since version 4:
- change floor calculation so that it is not as aggressive; this version
uses a piecewise linear function similar to minimum_target in the 2.6.18
balloon driver, but modified to add to totalreserve_pages instead of
subtract from max_pfn, the 2.6.18 version causes OOMs on recent kernels
because the kernel has expanded over time
- change safety_margin to min_usable_mb and comment on its use
- since committed_as does NOT include kernel space (and other reserved
pages), totalreserve_pages is now added to committed_as. The result is
less aggressive self-ballooning, but theoretically more appropriate.
Changes since version 3:
- missing include causes compile problem when CONFIG_FRONTSWAP is disabled
- add comments after includes
Changes since version 2:
- missing include causes compile problem only on 32-bit
Changes since version 1:
- tuneable safety margin added
[v5: avi.miller@oracle.com: still too aggressive, seeing some OOMs]
[v4: konrad.wilk@oracle.com: fix compile when CONFIG_FRONTSWAP is disabled]
[v3: guru.anbalagane@oracle.com: fix 32-bit compile]
[v2: konrad.wilk@oracle.com: make safety margin tuneable]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Altered description and added an extra include]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
BUG: sleeping function called from invalid context at /local/scratch/dariof/linux/kernel/mutex.c:271
in_atomic(): 1, irqs_disabled(): 0, pid: 3256, name: qemu-dm
1 lock held by qemu-dm/3256:
#0: (&(&priv->lock)->rlock){......}, at: [<ffffffff813223da>] gntdev_ioctl+0x2bd/0x4d5
Pid: 3256, comm: qemu-dm Tainted: G W 3.1.0-rc8+ #5
Call Trace:
[<ffffffff81054594>] __might_sleep+0x131/0x135
[<ffffffff816bd64f>] mutex_lock_nested+0x25/0x45
[<ffffffff8131c7c8>] free_xenballooned_pages+0x20/0xb1
[<ffffffff8132194d>] gntdev_put_map+0xa8/0xdb
[<ffffffff816be546>] ? _raw_spin_lock+0x71/0x7a
[<ffffffff813223da>] ? gntdev_ioctl+0x2bd/0x4d5
[<ffffffff8132243c>] gntdev_ioctl+0x31f/0x4d5
[<ffffffff81007d62>] ? check_events+0x12/0x20
[<ffffffff811433bc>] do_vfs_ioctl+0x488/0x4d7
[<ffffffff81007d4f>] ? xen_restore_fl_direct_reloc+0x4/0x4
[<ffffffff8109168b>] ? lock_release+0x21c/0x229
[<ffffffff81135cdd>] ? rcu_read_unlock+0x21/0x32
[<ffffffff81143452>] sys_ioctl+0x47/0x6a
[<ffffffff816bfd82>] system_call_fastpath+0x16/0x1b
gntdev_put_map tries to acquire a mutex when freeing pages back to the
xenballoon pool, so it cannot be called with a spinlock held. In
gntdev_release, the spinlock is not needed as we are freeing the
structure later; in the ioctl, only the list manipulation needs to be
under the lock.
Reported-and-Tested-By: Dario Faggioli <dario.faggioli@citrix.com>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The xenstore daemon does not have to run in the xen initial domain;
however, Linux currently uses xen_initial_domain to test if a loopback
event channel should be used instead of the event channel provided in
Xen's start_info structure. Instead, if the event channel passed in the
start_info structure is not valid, assume that this domain will run
xenstored locally and set up the event channel.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The xenbus event channel established in xenbus_init is intended to be a
loopback channel, but the remote domain was hardcoded to 0; this will
cause the channel to be unusable when xenstore is not being run in
domain 0.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Replace calls to the Xen-specific xen_alloc_vm_area() and
xen_free_vm_area() functions with the generic equivalent
(alloc_vm_area() and free_vm_area()).
On x86, these were identical already.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Allow the xen balloon driver to populate its list of extra pages from
more than one region of memory. This will allow platforms to provide
(for example) a region of low memory and a region of high memory.
The maximum possible number of extra regions is 128 (== E820MAX) which
is quite large so xen_extra_mem is placed in __initdata. This is safe
as both xen_memory_setup() and balloon_init() are in __init.
The balloon regions themselves are not altered (i.e., there is still
only the one region).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
When initializing the balloon only max_pfn needs to be checked
(max_pfn will always be <= e820_end_of_ram_pfn()) and improve the
confusing comment.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
In xen_memory_setup() pages that occur in gaps in the memory map are
released back to Xen. This reduces the domain's current page count in
the hypervisor. The Xen balloon driver does not correctly decrease
its initial current_pages count to reflect this. If 'delta' pages are
released and the target is adjusted the resulting reservation is
always 'delta' less than the requested target.
This affects dom0 if the initial allocation of pages overlaps the PCI
memory region but won't affect most domU guests that have been setup
with pseudo-physical memory maps that don't have gaps.
Fix this by accouting for the released pages when starting the balloon
driver.
If the domain's targets are managed by xapi, the domain may eventually
run out of memory and die because xapi currently gets its target
calculations wrong and whenever it is restarted it always reduces the
target by 'delta'.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Xen PVHVM needs xen-platform-pci, on the other hand xen-platform-pci is
useless in any other cases.
Therefore remove the XEN_PLATFORM_PCI config option and compile
xen-platform-pci built-in if XEN_PVHVM is selected.
Changes to v1:
- remove xen-platform-pci.o and just use platform-pci.o since it is not
externally visible anymore.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
We called mutex_lock() twice instead of unlocking.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
If we want to use granted pages for AIO, changing the mappings of a user
vma and the corresponding p2m is not enough, we also need to update the
kernel mappings accordingly.
Currently this is only needed for pages that are created for user usages
through /dev/xen/gntdev. As in, pages that have been in use by the
kernel and use the P2M will not need this special mapping.
However there are no guarantees that in the future the kernel won't
start accessing pages through the 1:1 even for internal usage.
In order to avoid the complexity of dealing with highmem, we allocated
the pages lowmem.
We issue a HYPERVISOR_grant_table_op right away in
m2p_add_override and we remove the mappings using another
HYPERVISOR_grant_table_op in m2p_remove_override.
Considering that m2p_add_override and m2p_remove_override are called
once per page we use multicalls and hypercall batching.
Use the kmap_op pointer directly as argument to do the mapping as it is
guaranteed to be present up until the unmapping is done.
Before issuing any unmapping multicalls, we need to make sure that the
mapping has already being done, because we need the kmap->handle to be
set correctly.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
[v1: Removed GRANT_FRAME_BIT usage]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Add an highmem parameter to alloc_xenballooned_pages, to allow callers to
request lowmem or highmem pages.
Fix the code style of free_xenballooned_pages' prototype.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Device drivers that create and destroy SR-IOV virtual functions via
calls to pci_enable_sriov() and pci_disable_sriov can cause catastrophic
failures if they attempt to destroy VFs while they are assigned to
guest virtual machines. By adding a flag for use by the Xen PCI back
to indicate that a device is assigned a device driver can check that
flag and avoid destroying VFs while they are assigned and avoid system
failures.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Randy found a compile error when using make randconfig to trigger
drivers/xen/xenbus/xenbus_xs.c:909:2: error: implicit declaration of function 'xen_hvm_domain'
it is unclear which of the CONFIG options triggered this. This
patch fixes the error.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Add new xs_reset_watches function to shutdown watches from old kernel after
kexec boot. The old kernel does not unregister all watches in the
shutdown path. They are still active, the double registration can not
be detected by the new kernel. When the watches fire, unexpected events
will arrive and the xenwatch thread will crash (jumps to NULL). An
orderly reboot of a hvm guest will destroy the entire guest with all its
resources (including the watches) before it is rebuilt from scratch, so
the missing unregister is not an issue in that case.
With this change the xenstored is instructed to wipe all active watches
for the guest. However, a patch for xenstored is required so that it
accepts the XS_RESET_WATCHES request from a client (see changeset
23839:42a45baf037d in xen-unstable.hg). Without the patch for xenstored
the registration of watches will fail and some features of a PVonHVM
guest are not available. The guest is still able to boot, but repeated
kexec boots will fail.
[v5: use xs_single instead of passing a dummy string to xs_talkv]
[v4: ignore -EEXIST in xs_reset_watches]
[v3: use XS_RESET_WATCHES instead of XS_INTRODUCE]
[v2: move all code which deals with XS_INTRODUCE into xs_introduce()
(based on feedback from Ian Campbell); remove casts from kvec assignment]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
[v1: Redid the git description a bit]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Now that the hypercall interface changes are in -unstable, make the
kernel side code not ignore the segment (aka domain) number anymore
(which results in pretty odd behavior on such systems). Rather, if
only the old interfaces are available, don't call them for devices on
non-zero segments at all.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
[v1: Edited git description]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Similar to the "xen/pciback: use mutex rather than spinlock in passthrough backend"
this patch converts the vpci backend to use a mutex instead of
a spinlock. Note that the code taking the lock won't ever get called
from non-sleepable context
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The caller that orchestrates the state changes is xenwatch_thread
and it takes a mutex. In our processing of Xenbus states we can take
the luxery of going to sleep on a mutex, so lets do that and
also fix this bug:
BUG: sleeping function called from invalid context at /linux/kernel/mutex.c:271
in_atomic(): 1, irqs_disabled(): 0, pid: 32, name: xenwatch
2 locks held by xenwatch/32:
#0: (xenwatch_mutex){......}, at: [<ffffffff813856ab>] xenwatch_thread+0x4b/0x180
#1: (&(&pdev->dev_lock)->rlock){......}, at: [<ffffffff8138f05b>] xen_pcibk_disconnect+0x1b/0x80
Pid: 32, comm: xenwatch Not tainted 3.1.0-rc6-00015-g3ce340d #2
Call Trace:
[<ffffffff810892b2>] __might_sleep+0x102/0x130
[<ffffffff8163b90f>] mutex_lock_nested+0x2f/0x50
[<ffffffff81382c1c>] unbind_from_irq+0x2c/0x1b0
[<ffffffff8110da66>] ? free_irq+0x56/0xb0
[<ffffffff81382dbc>] unbind_from_irqhandler+0x1c/0x30
[<ffffffff8138f06b>] xen_pcibk_disconnect+0x2b/0x80
[<ffffffff81390348>] xen_pcibk_frontend_changed+0xe8/0x140
[<ffffffff81387ac2>] xenbus_otherend_changed+0xd2/0x150
[<ffffffff810895c1>] ? get_parent_ip+0x11/0x50
[<ffffffff81387de0>] frontend_changed+0x10/0x20
[<ffffffff81385712>] xenwatch_thread+0xb2/0x180
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
This is a minor bugfix and a set of small cleanups; as it is not clear
whether this needs splitting into pieces (and if so, at what
granularity), it is a single combined patch.
- add a missing return statement to an error path in
kill_domain_by_device()
- use pci_is_enabled() rather than raw atomic_read()
- remove a bogus attempt to zero-terminate an already zero-terminated
string
- #define DRV_NAME once uniformly in the shared local header
- make DRIVER_ATTR() variables static
- eliminate a pointless use of list_for_each_entry_safe()
- add MODULE_ALIAS()
- a little bit of constification
- adjust a few messages
- remove stray semicolons from inline function definitions
Signed-off-by: Jan Beulich <jbeulich@suse.com>
[v1: Dropped the resource_size fix, altered the description]
[v2: Fixed cleanpatch.pl comments]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
To accommodate the call to the callback function from
__xen_pcibk_publish_pci_roots(), which so far dropped and the re-
acquired the lock without checking that the list didn't actually
change, convert the code to use a mutex instead (observing that the
code taking the lock won't ever get called from non-sleepable
context).
As a result, drop the bogus use of list_for_each_entry_safe() and
remove the inappropriate dropping of the lock.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Use resource_size function on resource object
instead of explicit computation.
The semantic patch that makes this output is available
in scripts/coccinelle/api/resource_size.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
When we allocate/change the IRQ informations, we do not
need to use spinlocks. We can use a mutex (which is
what the generic IRQ code does for allocations/changes).
Fixes a slew of:
BUG: sleeping function called from invalid context at /linux/kernel/mutex.c:271
in_atomic(): 1, irqs_disabled(): 0, pid: 3216, name: xenstored
2 locks held by xenstored/3216:
#0: (&u->bind_mutex){......}, at: [<ffffffffa02e0920>] evtchn_ioctl+0x30/0x3a0 [xen_evtchn]
#1: (irq_mapping_update_lock){......}, at: [<ffffffff8138b274>] bind_evtchn_to_irq+0x24/0x90
Pid: 3216, comm: xenstored Not tainted 3.1.0-rc6-00021-g437a3d1 #2
Call Trace:
[<ffffffff81088d10>] __might_sleep+0x100/0x130
[<ffffffff81645c2f>] mutex_lock_nested+0x2f/0x50
[<ffffffff81627529>] __irq_alloc_descs+0x49/0x200
[<ffffffffa02e0920>] ? evtchn_ioctl+0x30/0x3a0 [xen_evtchn]
[<ffffffff8138b214>] xen_allocate_irq_dynamic+0x34/0x70
[<ffffffff8138b2ad>] bind_evtchn_to_irq+0x5d/0x90
[<ffffffffa02e03c0>] ? evtchn_bind_to_user+0x60/0x60 [xen_evtchn]
[<ffffffff8138c282>] bind_evtchn_to_irqhandler+0x32/0x80
[<ffffffffa02e03a9>] evtchn_bind_to_user+0x49/0x60 [xen_evtchn]
[<ffffffffa02e0a34>] evtchn_ioctl+0x144/0x3a0 [xen_evtchn]
[<ffffffff811b4070>] ? vfsmount_lock_local_unlock+0x50/0x80
[<ffffffff811a6a1a>] do_vfs_ioctl+0x9a/0x5e0
[<ffffffff811b476f>] ? mntput+0x1f/0x30
[<ffffffff81196259>] ? fput+0x199/0x240
[<ffffffff811a7001>] sys_ioctl+0xa1/0xb0
[<ffffffff8164ea82>] system_call_fastpath+0x16/0x1b
Reported-by: Jim Burns <jim_burn@bellsouth.net>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
After triggering a crash dump in a HVM guest, the PV backend drivers
will remain in Connected state. When the kdump kernel starts the PV
drivers will skip such devices. As a result, no root device is found and
the vmcore cant be saved.
A similar situation happens after a kexec boot, here the devices will be
in the Closed state.
With this change all frontend devices with state XenbusStateConnected or
XenbusStateClosed will be reset by changing the state file to Closing ->
Closed -> Initializing. This will trigger a disconnect in the backend
drivers. Now the frontend drivers will find the backend drivers in state
Initwait and can connect.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
[v2:
- add timeout when waiting for backend state change
(based on feedback from Ian Campell)
- extent printk message to include backend string
- add comment to fall-through case in xenbus_reset_frontend]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
During a kexec boot some virqs such as timer and debugirq were already
registered by the old kernel. The hypervisor will return -EEXISTS from
the new EVTCHNOP_bind_virq request and the BUG in bind_virq_to_irq()
triggers. Catch the -EEXISTS error and loop through all possible ports to find
what port belongs to the virq/cpu combo.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
[v2:
- use NR_EVENT_CHANNELS instead of private MAX_EVTCHNS]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
events arrive
During repeated kexec boots xenwatch_thread() can crash because
xenbus_watch->callback is cleared by xenbus_watch_path() if a node/token
combo for a new watch happens to match an already registered watch from
an old kernel. In this case xs_watch returns -EEXISTS, then
register_xenbus_watch() does not remove the to-be-registered watch from
the list of active watches but returns the -EEXISTS to the caller
anyway.
Because the watch is still active in xenstored it will cause an event
which will arrive in the new kernel. process_msg() will find the
encapsulated struct xenbus_watch in its list of registered watches and
puts the "empty" watch handle in the queue for xenwatch_thread().
xenwatch_thread() then calls ->callback which was cleared earlier by
xenbus_watch_path().
To prevent that crash in a guest running on an old xen toolstack remove
the special -EEXIST handling.
v2:
- remove the EEXIST handing in register_xenbus_watch() instead of
checking for ->callback in process_msg()
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
|
|
The process to swizzle a Machine Frame Number (MFN) is not always
necessary. Especially if we know that we actually do not have to do it.
In this patch we check the MFN against the device's coherent
DMA mask and if the requested page(s) are contingous. If it all checks
out we will just return the bus addr without doing the memory
swizzle.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Notifier functions are expected to return NOTIFY_* codes, not -E...
ones. In particular, since the respective hypercalls failing is not
fatal to the operation of the Dom0 kernel, it must be avoided to
return negative values here as those would make it appear as if
NOTIFY_STOP_MASK wa set, suppressing further notification calls to
other interested parties (which is also why we don't want to use
notifier_from_errno() here).
While at it, also notify the user of a failed hypercall.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
[v1: Added dev_err and the disable MSI/MSI-X call]
[v2: Removed the disable MSI/MSI-X call]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Fix printk() and panic() args [swap them] to fix build warnings:
drivers/xen/swiotlb-xen.c:201: warning: format '%s' expects type 'char *', but argument 2 has type 'int'
drivers/xen/swiotlb-xen.c:201: warning: format '%d' expects type 'int', but argument 3 has type 'char *'
drivers/xen/swiotlb-xen.c:202: warning: format '%s' expects type 'char *', but argument 2 has type 'int'
drivers/xen/swiotlb-xen.c:202: warning: format '%d' expects type 'int', but argument 3 has type 'char *'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
