summaryrefslogtreecommitdiffstats
path: root/drivers/xen/privcmd.c
AgeCommit message (Collapse)AuthorFilesLines
2015-10-23xen/privcmd: Add support for Linux 64KB page granularityJulien Grall1-3/+5
The hypercall interface (as well as the toolstack) is always using 4KB page granularity. When the toolstack is asking for mapping a series of guest PFN in a batch, it expects to have the page map contiguously in its virtual memory. When Linux is using 64KB page granularity, the privcmd driver will have to map multiple Xen PFN in a single Linux page. Note that this solution works on page granularity which is a multiple of 4KB. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/balloon: make alloc_xenballoon_pages() always allocate low pagesDavid Vrabel1-1/+1
All users of alloc_xenballoon_pages() wanted low memory pages, so remove the option for high memory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-09-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+2
Merge third patch-bomb from Andrew Morton: - even more of the rest of MM - lib/ updates - checkpatch updates - small changes to a few scruffy filesystems - kmod fixes/cleanups - kexec updates - a dma-mapping cleanup series from hch * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits) dma-mapping: consolidate dma_set_mask dma-mapping: consolidate dma_supported dma-mapping: cosolidate dma_mapping_error dma-mapping: consolidate dma_{alloc,free}_noncoherent dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent} mm: use vma_is_anonymous() in create_huge_pmd() and wp_huge_pmd() mm: make sure all file VMAs have ->vm_ops set mm, mpx: add "vm_flags_t vm_flags" arg to do_mmap_pgoff() mm: mark most vm_operations_struct const namei: fix warning while make xmldocs caused by namei.c ipc: convert invalid scenarios to use WARN_ON zlib_deflate/deftree: remove bi_reverse() lib/decompress_unlzma: Do a NULL check for pointer lib/decompressors: use real out buf size for gunzip with kernel fs/affs: make root lookup from blkdev logical size sysctl: fix int -> unsigned long assignments in INT_MIN case kexec: export KERNEL_IMAGE_SIZE to vmcoreinfo kexec: align crash_notes allocation to make it be inside one physical page kexec: remove unnecessary test in kimage_alloc_crash_control_pages() kexec: split kexec_load syscall from kexec core code ...
2015-09-10mm: mark most vm_operations_struct constKirill A. Shutemov1-2/+2
With two exceptions (drm/qxl and drm/radeon) all vm_operations_struct structs should be constant. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Minchan Kim <minchan@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08xen/privcmd: Further s/MFN/GFN/ clean-upJulien Grall1-22/+22
The privcmd code is mixing the usage of GFN and MFN within the same functions which make the code difficult to understand when you only work with auto-translated guests. The privcmd driver is only dealing with GFN so replace all the mention of MFN into GFN. The ioctl structure used to map foreign change has been left unchanged given that the userspace is using it. Nonetheless, add a comment to explain the expected value within the "mfn" field. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-16xen/privcmd: improve performance of MMAPBATCH_V2David Vrabel1-35/+82
Make the IOCTL_PRIVCMD_MMAPBATCH_V2 (and older V1 version) map multiple frames at a time rather than one at a time, despite the pages being non-consecutive GFNs. xen_remap_foreign_mfn_array() is added which maps an array of GFNs (instead of a consecutive range of GFNs). Since per-frame errors are returned in an array, privcmd must set the MMAPBATCH_V1 error bits as part of the "report errors" phase, after all the frames are mapped. Migrate times are significantly improved (when using a PV toolstack domain). For example, for an idle 12 GiB PV guest: Before After real 0m38.179s 0m26.868s user 0m15.096s 0m13.652s sys 0m28.988s 0m18.732s Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-02-23x86/xen: allow privcmd hypercalls to be preemptedDavid Vrabel1-0/+2
Hypercalls submitted by user space tools via the privcmd driver can take a long time (potentially many 10s of seconds) if the hypercall has many sub-operations. A fully preemptible kernel may deschedule such as task in any upcall called from a hypercall continuation. However, in a kernel with voluntary or no preemption, hypercall continuations in Xen allow event handlers to be run but the task issuing the hypercall will not be descheduled until the hypercall is complete and the ioctl returns to user space. These long running tasks may also trigger the kernel's soft lockup detection. Add xen_preemptible_hcall_begin() and xen_preemptible_hcall_end() to bracket hypercalls that may be preempted. Use these in the privcmd driver. When returning from an upcall, call xen_maybe_preempt_hcall() which adds a schedule point if if the current task was within a preemptible hypercall. Since _cond_resched() can move the task to a different CPU, clear and set xen_in_preemptible_hcall around the call. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2013-12-06xen: privcmd: do not return pages which we have failed to unmapIan Campbell1-2/+7
This failure represents a hypervisor issue, but if it does occur then nothing good can come of returning pages which still refer to a foreign owned page into the general allocation pool. Instead we are forced to leak them. Log that we have done so. The potential for failure only exists for autotranslated guest (e.g. ARM and x86 PVH). Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2013-08-30Xen: Fix retry calls into PRIVCMD_MMAPBATCH*.Andres Lagar-Cavilla1-20/+63
When a foreign mapper attempts to map guest frames that are paged out, the mapper receives an ENOENT response and will have to try again while a helper process pages the target frame back in. Gating checks on PRIVCMD_MMAPBATCH* ioctl args were preventing retries of mapping calls. Permit subsequent calls to update a sub-range of the VMA, iff nothing is yet mapped in that range. Since it is now valid to call PRIVCMD_MMAPBATCH* multiple times, only set vma->vm_private_data if the parameters are valid and (if necessary) the pages for the auto_translated_physmap case have been allocated. This prevents subsequent calls from incorrectly entering the 'retry' path when there are no pages allocated etc. Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-28xen: Convert printks to pr_<level>Joe Perches1-1/+3
Convert printks to pr_<level> (excludes printk(KERN_DEBUG...) to be more consistent throughout the xen subsystem. Add pr_fmt with KBUILD_MODNAME or "xen:" KBUILD_MODNAME Coalesce formats and add missing word spaces Add missing newlines Align arguments and reflow to 80 columns Remove DRV_NAME from formats as pr_fmt adds the same content This does change some of the prefixes of these messages but it also does make them more consistent. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/privcmd: fix condition in privcmd_close()Dan Carpenter1-1/+1
The parenthesis are in the wrong place so the original code is equivalent to: if (!xen_feature(XENFEAT_writable_descriptor_tables)) { ... Which obviously was not intended. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-01-15xen/privcmd: Fix mmap batch ioctl.Andres Lagar-Cavilla1-36/+47
1. If any individual mapping error happens, the V1 case will mark *all* operations as failed. Fixed. 2. The err_array was allocated with kcalloc, resulting in potentially O(n) page allocations. Refactor code to not use this array. Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-01-15Merge tag 'v3.7' into stable/for-linus-3.8Konrad Rzeszutek Wilk1-7/+11
Linux 3.7 * tag 'v3.7': (833 commits) Linux 3.7 Input: matrix-keymap - provide proper module license Revert "revert "Revert "mm: remove __GFP_NO_KSWAPD""" and associated damage ipv4: ip_check_defrag must not modify skb before unsharing Revert "mm: avoid waking kswapd for THP allocations when compaction is deferred or contended" inet_diag: validate port comparison byte code to prevent unsafe reads inet_diag: avoid unsafe and nonsensical prefix matches in inet_diag_bc_run() inet_diag: validate byte code to prevent oops in inet_diag_bc_run() inet_diag: fix oops for IPv4 AF_INET6 TCP SYN-RECV state mm: vmscan: fix inappropriate zone congestion clearing vfs: fix O_DIRECT read past end of block device net: gro: fix possible panic in skb_gro_receive() tcp: bug fix Fast Open client retransmission tmpfs: fix shared mempolicy leak mm: vmscan: do not keep kswapd looping forever due to individual uncompactable zones mm: compaction: validate pfn range passed to isolate_freepages_block mmc: sh-mmcif: avoid oops on spurious interrupts (second try) Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts" mmc: sdhci-s3c: fix missing clock for gpio card-detect lib/Makefile: Fix oid_registry build dependency ... Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Conflicts: arch/arm/xen/enlighten.c drivers/xen/Makefile [We need to have the v3.7 base as the 'for-3.8' was based off v3.7-rc3 and there are some patches in v3.7-rc6 that we to have in our branch]
2013-01-11xen/privcmd: Relax access control in privcmd_ioctl_mmapTamas Lengyel1-6/+0
In the privcmd Linux driver two checks in the functions privcmd_ioctl_mmap and privcmd_ioctl_mmap_batch are not needed as they are trying to enforce hypervisor-level access control. They should be removed as they break secondary control domains when performing dom0 disaggregation. Xen itself provides adequate security controls around these hypercalls and these checks prevent those controls from functioning as intended. Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com> Cc: Daniel De Graaf <dgdegra@tycho.nsa.gov> [v1: Fixed up the patch and commit description] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-29xen: privcmd: support autotranslated physmap guests.Mukesh Rathor1-2/+67
PVH and ARM only support the batch interface. To map a foreign page to a process, the PFN must be allocated and the autotranslated path uses ballooning for that purpose. The returned PFN is then mapped to the foreign page. xen_unmap_domain_mfn_range() is introduced to unmap these pages via the privcmd close call. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com> [v1: Fix up privcmd_close] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> [v2: used for ARM too]
2012-11-29xen: add pages parameter to xen_remap_domain_mfn_rangeIan Campbell1-2/+3
Also introduce xen_unmap_domain_mfn_range. These are the parts of Mukesh's "xen/pvh: Implement MMU changes for PVH" which are also needed as a baseline for ARM privcmd support. The original patch was: Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> This derivative is also: Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
2012-11-20xen/privcmd: Correctly return success from IOCTL_PRIVCMD_MMAPBATCHMats Petersson1-7/+11
This is a regression introduced by ceb90fa0 (xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctl). It broke xentrace as it used xc_map_foreign() instead of xc_map_foreign_bulk(). Most code-paths prefer the MMAPBATCH_V2, so this wasn't very obvious that it broke. The return value is set early on to -EINVAL, and if all goes well, the "set top bits of the MFN's" never gets called, so the return value is still EINVAL when the function gets to the end, causing the caller to think it went wrong (which it didn't!) Now also including Andres "move the ret = -EINVAL into the error handling path, as this avoids other similar errors in future. Signed-off-by: Mats Petersson <mats.petersson@citrix.com> Acked-by: Andres Lagar-Cavilla <andres@lagarcavilla.org> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-09mm: kill vma flag VM_RESERVED and mm->reserved_vm counterKonstantin Khlebnikov1-1/+2
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-10xen/privcmd: return -EFAULT on errorDan Carpenter1-1/+4
__copy_to_user() returns the number of bytes remaining to be copied but we want to return a negative error code here. Acked-by: Andres Lagar-Cavilla <andres@lagarcavilla.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-06xen/privcmd: Fix mmap batch ioctl error status copy back.Andres Lagar-Cavilla1-1/+1
Copy back of per-slot error codes is only necessary for V2. V1 does not provide an error array, so copyback will unconditionally set the global rc to EFAULT. Only copyback for V2. Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-05xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctlAndres Lagar-Cavilla1-30/+100
PRIVCMD_MMAPBATCH_V2 extends PRIVCMD_MMAPBATCH with an additional field for reporting the error code for every frame that could not be mapped. libxc prefers PRIVCMD_MMAPBATCH_V2 over PRIVCMD_MMAPBATCH. Also expand PRIVCMD_MMAPBATCH to return appropriate error-encoding top nibble in the mfn array. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-23xen: allow privcmd for HVM guestsStefano Stabellini1-4/+0
This patch removes the "return -ENOSYS" for auto_translated_physmap guests from privcmd_mmap, thus it allows ARM guests to issue privcmd mmap calls. However privcmd mmap calls are still going to fail for HVM and hybrid guests on x86 because the xen_remap_domain_mfn_range implementation is currently PV only. Changes in v2: - better commit message; - return -EINVAL from xen_remap_domain_mfn_range if auto_translated_physmap. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-12-16xen/privcmd: Remove unused support for arch specific privcmp mmapBastian Blank1-2/+0
This was used for ia64. But there is no working ia64 support in sight, so remove it for now. Signed-off-by: Bastian Blank <waldi@debian.org> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-12-16xen: Add privcmd device driverBastian Blank1-0/+437
Access to arbitrary hypercalls is currently provided via xenfs. This adds a standard character device to handle this. The support in xenfs remains for backward compatibility and uses the device driver code. Signed-off-by: Bastian Blank <waldi@debian.org> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>