summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2022-03-31Merge tag 'linux-watchdog-5.18-rc1' of ↵Linus Torvalds10-246/+404
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add support for BCM4908 - renesas_wdt: add R-Car Gen4 support - improve watchdog_dev function documentation - sp5100_tco: replace the cd6h/cd7h port I/O with MMIO accesses during initialization - several other small improvements and fixes * tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog: Watchdog: sp5100_tco: Enable Family 17h+ CPUs Watchdog: sp5100_tco: Add initialization using EFCH MMIO Watchdog: sp5100_tco: Refactor MMIO base address initialization Watchdog: sp5100_tco: Move timer initialization into function watchdog: ixp4xx: Implement restart watchdog: orion_wdt: support pretimeout on Armada-XP watchdog: allow building BCM7038_WDT for BCM4908 watchdog: renesas_wdt: Add R-Car Gen4 support dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support watchdog: Improve watchdog_dev function documentation watchdog: aspeed: add nowayout support watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function watchdog: imx2_wdg: Alow ping on suspend
2022-03-27Watchdog: sp5100_tco: Enable Family 17h+ CPUsTerry Bowman2-12/+5
The driver currently uses a CPU family match of 17h to determine EFCH_PM_DECODEEN_WDT_TMREN register support. This family check will not support future AMD CPUs and instead will require driver updates to add support. Remove the family 17h family check and add a check for SMBus PCI revision ID 0x51 or greater. The MMIO access method has been available since at least SMBus controllers using PCI revision 0x51. This revision check will support family 17h and future AMD processors including EFCH functionality without requiring driver changes. Co-developed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220202153525.1693378-5-terry.bowman@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27Watchdog: sp5100_tco: Add initialization using EFCH MMIOTerry Bowman2-1/+104
cd6h/cd7h port I/O can be disabled on recent AMD hardware. Read accesses to disabled cd6h/cd7h port I/O will return F's and written data is dropped. It is recommended to replace the cd6h/cd7h port I/O with MMIO. Co-developed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220202153525.1693378-4-terry.bowman@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27Watchdog: sp5100_tco: Refactor MMIO base address initializationTerry Bowman2-74/+82
Combine MMIO base address and alternate base address detection. Combine based on layout type. This will simplify the function by eliminating a switch case. Move existing request/release code into functions. This currently only supports port I/O request/release. The move into a separate function will make it ready for adding MMIO region support. Co-developed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220202153525.1693378-3-terry.bowman@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27Watchdog: sp5100_tco: Move timer initialization into functionTerry Bowman1-29/+36
Refactor driver's timer initialization into new function. This is needed inorder to support adding new device layouts while using common timer initialization. Co-developed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220202153525.1693378-2-terry.bowman@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: ixp4xx: Implement restartLinus Walleij1-0/+14
Implement watchdog restart in the IXP4xx watchdog timer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220206230028.476659-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: orion_wdt: support pretimeout on Armada-XPChris Packham1-4/+9
Commit e07a4c79ca75 ("watchdog: orion_wdt: use timer1 as a pretimeout") added support for a pretimeout on Armada-38x variants. Because the Armada-XP variants use armada370_start/armada370_stop (due to missing an explicit RSTOUT mask bit for the watchdog). Add the required pretimeout support to armada370_start/armada370_stop for Armada-XP. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220211003257.2037332-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: allow building BCM7038_WDT for BCM4908Rafał Miłecki1-1/+1
BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx including the watchdog block. Allow building this driver for it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220209203202.26395-1-zajec5@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: renesas_wdt: Add R-Car Gen4 supportThanh Quan1-0/+1
Add the compatible string for the R-Car Gen4 family. No further driver changes are needed. Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/cc395105e1d34aab2c076d368c0737833970b9d2.1642525158.git.geert+renesas@glider.be Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: Improve watchdog_dev function documentationDaniel Bristot de Oliveira1-119/+125
Adjust function comments to the kernel doc format. It also adjusts some variable names and adds return values. No functional change. Changes from V1: Change "Returns" to "Return:" (Randy Dunlap) Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/30378a03e9cd9b5f6e92ec9bf512edc38bad8627.1644589712.git.bristot@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: aspeed: add nowayout supportEduardo Valentin1-0/+7
Add support for not stopping the watchdog when the userspace application quits. At closing of the device, the driver cannot determine if this was a graceful closure or if the app crashed. If the support of nowayout on this driver, the system integrator can select the behaviour by setting the kernel config and enabling it. Cc: Wim Van Sebroeck <wim@linux-watchdog.org> (maintainer:WATCHDOG DEVICE DRIVERS) Cc: Guenter Roeck <linux@roeck-us.net> (maintainer:WATCHDOG DEVICE DRIVERS) Cc: Joel Stanley <joel@jms.id.au> (supporter:ARM/ASPEED MACHINE SUPPORT) Cc: Andrew Jeffery <andrew@aj.id.au> (reviewer:ARM/ASPEED MACHINE SUPPORT) Cc: linux-watchdog@vger.kernel.org (open list:WATCHDOG DEVICE DRIVERS) Cc: linux-arm-kernel@lists.infradead.org (moderated list:ARM/ASPEED MACHINE SUPPORT) Cc: linux-aspeed@lists.ozlabs.org (moderated list:ARM/ASPEED MACHINE SUPPORT) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Eduardo Valentin <eduval@amazon.com> Signed-off-by: Eduardo Valentin <evalenti@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220212021033.2344-1-eduval@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: rti-wdt: Add missing pm_runtime_disable() in probe functionMiaoqian Lin1-0/+1
If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220105092114.23932-1-linmq006@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: imx2_wdg: Alow ping on suspendAlistair Francis1-7/+20
The i.MX watchdog cannot be disabled by software once it has been enabled. This means that it can't be stopped before suspend. For systems that enter low power mode this is fine, as the watchdog will be automatically stopped by hardware in low power mode. Not all i.MX platforms support low power mode in the mainline kernel. For example the i.MX7D does not enter low power mode and so will be rebooted 2 minutes after entering sleep states. This patch introduces a device tree property "fsl,ping-during-suspend" that can be used to enable ping on suspend support for these systems. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220127104739.312592-1-alistair@alistair23.me Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-25Merge tag 'mfd-next-5.18' of ↵Linus Torvalds2-17/+70
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Maxim MAX77714 PMIC Removed Drivers: - Remove support for ST-Ericsson AB8500 DebugFS New Device Support: - Add support for Silergy SY7636A to Simple MFD I2C - Add support for MediaTek MT6366 PMIC to MT6358 IRQ - Add support for Charger to Intel PMIC CRC - Add support for Raptor Lake to Intel LPSS PCI New Functionality: - Add support for Reboot to Rockchip RK808 Fix-ups: - Device Tree changes (includcing YAML conversion) for silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577, maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic, stericsson,ab8500, stericsson,db8500-prcmu, samsung,exynos5433-lpass, mt6397, syscon, brcm,cru - Visible to menuconfig; simple-mfd-i2c - Clean-up or clarify code; max77686, intel_soc_pmic_crc - Improve error handling; mc13xxx-core, stmfx, asic3 - Pass device information to child devices; iqs62x, intel-lpss-acpi - Individually identify IRQ domains; intel_soc_pmic_core - Remove superfluous code; dbx500-prcmu, exynos-lpass - Staticify and constify; arizona-i2c - Mark sometimes used data as __maybe_unused; atmel-flexcom - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi - Use provided (platform) APIs; ab8500-core - Trivial (whitespace, spelling); rohm-bd9576" * tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible mfd: bd9576: fix typos in comments mfd: Use platform_get_irq() to get the interrupt mfd: db8500-prcmu: Remove unused inline function mfd: arizona-spi: Add Android board ACPI table handling mfd: arizona-spi: Split Windows ACPI init code into its own function mfd: asic3: Add missing iounmap() on error asic3_mfd_probe MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS mfd: intel-lpss: Provide an SSP type to the driver dt-bindings: mfd: brcm,cru: Rename pinctrl node dt-bindings: Add compatibles for undocumented trivial syscons mfd: atmel-flexcom: Fix compilation warning dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema mfd: exynos-lpass: Drop unneeded syscon.h include mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs mfd: ab8500: Drop debugfs module mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC mfd: ab8500: Rewrite bindings in YAML mfd: qcom-spmi-pmic: Add pm8953 compatible ...
2022-03-07watchdog: max77620: Add comment to clarify set_timeout procedureLuca Ceresoli1-0/+5
Clarify why we need to ping the watchdog before changing the timeout by quoting the MAX77714 datasheet. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-03-07watchdog: max77620: Add support for the max77714 variantLuca Ceresoli2-17/+65
The MAX77714 is a MFD chip whose watchdog has the same programming procedures as the MAX77620 watchdog, but most register offsets and bit masks are different, as well as some features. Support the MAX77714 watchdog by adding a variant description table holding the differences. All the features implemented by this driver are available on the MAX77714 except for the lack of a WDTOFFC bit. Instead of using a "HAS_*" flag we handle this by holding in the cnfg_glbl2_cfg_bits struct field the bits (i.e. the features) to enable in the CNFG_GLBL2 register. These bits differ among the two models. This implementation allows to avoid any conditional code, keeping the execution flow unchanged. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-03-01MIPS: Remove TX39XX supportThomas Bogendoerfer1-1/+1
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
2022-01-17Merge tag 'linux-watchdog-5.17-rc1' of ↵Linus Torvalds14-448/+1228
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - New device support: - Watchdog Timer driver for RZ/G2L - Realtek Otto watchdog timer - Apple SoC watchdog driver - Fintek F81966 - Remove BCM63XX_WDT after support for this SoC was added to BCM7038_WDT - Improvements of the BCM7038_WDT and s3c2410_wdt code - Several other fixes and improvements * tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits) watchdog: msc313e: Check if the WDT was running at boot watchdog: Add Apple SoC watchdog driver dt-bindings: watchdog: Add SM6350 and SM8250 compatible watchdog: s3c2410: Fix getting the optional clock watchdog: s3c2410: Use platform_get_irq() to get the interrupt dt-bindings: watchdog: atmel: Add missing 'interrupts' property watchdog: mtk_wdt: use platform_get_irq_optional watchdog: Add Watchdog Timer driver for RZ/G2L dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L watchdog: da9063: Add hard dependency on I2C watchdog: Add Realtek Otto watchdog timer dt-bindings: watchdog: Realtek Otto WDT binding watchdog: s3c2410: Add Exynos850 support watchdog: da9063: use atomic safe i2c transfer in reset handler watchdog: davinci: Use div64_ul instead of do_div watchdog: Remove BCM63XX_WDT MIPS: BCM63XX: Provide platform data to watchdog device watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt watchdog: Allow building BCM7038_WDT for BCM63XX watchdog: bcm7038_wdt: Support platform data configuration ...
2022-01-05watchdog: msc313e: Check if the WDT was running at bootDaniel Palmer1-0/+4
Check if the WDT was running at boot and set the running flag if it was. This prevents the system from getting rebooted if the userland daemon doesn't take over soon enough or there isn't a userland daemon at all. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Reviewed-by: Romain Perier <romain.perier@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211228073427.2443174-1-daniel@0x0f.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: Add Apple SoC watchdog driverSven Peter3-0/+239
Add support for the watchdog timer found in Apple SoCs. This driver is also required to reboot these machines. Signed-off-by: Sven Peter <sven@svenpeter.dev> Tested-by: Janne Grunau <j@jannau.net> Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211211123633.4392-2-sven@svenpeter.dev Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: s3c2410: Fix getting the optional clockSam Protsenko1-10/+12
"watchdog_src" clock is optional and may not be present for some SoCs supported by this driver. Nevertheless, in case the clock is provided but some error happens during its getting, that error should be handled properly. Use devm_clk_get_optional() API for that. Also report possible errors using dev_err_probe() to handle properly -EPROBE_DEFER error (if clock provider is not ready by the time WDT probe function is executed). Fixes: e249d01b5e8b ("watchdog: s3c2410: Support separate source clock") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211212170247.30646-1-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: s3c2410: Use platform_get_irq() to get the interruptLad Prabhakar1-8/+6
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211216214747.10454-1-prabhakar.mahadev-lad.rj@bp.renesas.com [groeck: Fixed context conflicts] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: mtk_wdt: use platform_get_irq_optionalTzung-Bi Shih1-1/+1
The watchdog pre-timeout (bark) interrupt is optional. Use platform_get_irq_optional() to avoid seeing such following error message: >>> mtk-wdt 10007000.watchdog: IRQ index 0 not found Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211208095555.4099551-1-tzungbi@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: Add Watchdog Timer driver for RZ/G2LBiju Das3-0/+272
Add Watchdog Timer driver for RZ/G2L SoC. WDT IP block supports normal watchdog timer function and reset request function due to CPU parity error. This driver currently supports normal watchdog timer function and later will add support for reset request function due to CPU parity error. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211130195357.18626-3-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: da9063: Add hard dependency on I2CAndrej Picej1-0/+1
Commit 5ea29919c294 ("watchdog: da9063: use atomic safe i2c transfer in reset handler") implements atomic save i2c transfer which uses i2c functions directly. Add I2C hard dependency which overrides COMPILE_TEST. Reported-by: kernel test robot <lkp@intel.com> Fixes: 968011a291f3 ("watchdog: da9063: use atomic safe i2c transfer in reset handler") Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211129134938.3273289-1-andrej.picej@norik.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: Add Realtek Otto watchdog timerSander Vanheule3-0/+398
Realtek MIPS SoCs (platform name Otto) have a watchdog timer with pretimeout notifitication support. The WDT can (partially) hard reset, or soft reset the SoC. This driver implements all features as described in the devicetree binding, except the phase2 interrupt, and also functions as a restart handler. The cpu reset mode is considered to be a "warm" restart, since this mode does not reset all peripherals. Being an embedded system though, the "cpu" and "software" modes will still cause the bootloader to run on restart. It is not known how a forced system reset can be disabled on the supported platforms. This means that the phase2 interrupt will only fire at the same time as reset, so implementing phase2 is of little use. Signed-off-by: Sander Vanheule <sander@svanheule.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/6d060bccbdcc709cfa79203485db85aad3c3beb5.1637252610.git.sander@svanheule.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Add Exynos850 supportSam Protsenko1-1/+63
Exynos850 is a bit different from SoCs already supported in WDT driver: - AUTOMATIC_WDT_RESET_DISABLE register is removed, so its value is always 0; .disable_auto_reset callback is not set for that reason - MASK_WDT_RESET_REQUEST register is replaced with CLUSTERx_NONCPU_IN_EN register; instead of masking (disabling) WDT reset interrupt it's now enabled with the same value; .mask_reset callback is reused for that functionality though - To make WDT functional, WDT counter needs to be enabled in CLUSTERx_NONCPU_OUT register; it's done using .enable_counter callback Also Exynos850 has two CPU clusters, each has its own dedicated WDT instance. Different PMU registers and bits are used for each cluster. So driver data is now modified in probe, adding needed info depending on cluster index passed from device tree. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211121165647.26706-13-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: da9063: use atomic safe i2c transfer in reset handlerYunus Bas1-3/+9
This patch is based on commit 057b52b4b3d5 ("watchdog: da9062: make restart handler atomic safe"), which uses the atomic transfer capability of the i2c framework. Signed-off-by: Yunus Bas <y.bas@phytec.de> Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211124080654.2601135-1-andrej.picej@norik.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: davinci: Use div64_ul instead of do_divChangcheng Deng1-1/+1
do_div() does a 64-by-32 division. Here the divisor is an unsigned long which on some platforms is 64 bit wide. So use div64_ul instead of do_div to avoid a possible truncation. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211125014924.46297-1-deng.changcheng@zte.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: Remove BCM63XX_WDTFlorian Fainelli3-328/+0
Now that we can utilize the BCM7038_WDT driver, remove that one which was not converted to the watchdog APIs. There are a couple of notable differences with how the bcm7038_wdt driver proceeds: - bcm63xx_wdt would register with the ad-hoc BCM63xx hardware timer API, but this would only be used in order to catch the interrupt *before* a SoC reset and make the kernel "die" - bcm6xx_wdt would register a software timer and kick it every second in order to pet the watchdog, thus offering a two step watchdog process. This is not something that is brought over to the bcm7038_wdt as it is deemed unnecessary. If user-space cannot pet the watchdog, but a kernel timer can, the system is still in a bad shape anyway. bcm7038_wdt is simpler in its behavior and behaves as a standard watchdog driver and is not making use of any specific platform APIs, therefore making it more maintainable and extensible. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211112224636.395101-8-f.fainelli@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdtFlorian Fainelli1-0/+7
In order to phase out bcm63xx_wdt and use bcm7038_wdt instead, introduce a platform_device_id table that allows both names to be matched. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211112224636.395101-6-f.fainelli@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: Allow building BCM7038_WDT for BCM63XXFlorian Fainelli1-3/+4
CONFIG_BCM63XX denotes the legacy MIPS-based DSL SoCs which utilize the same piece of hardware as a watchdog, make it possible to select that driver for those platforms. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211112224636.395101-5-f.fainelli@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: bcm7038_wdt: Support platform data configurationFlorian Fainelli1-1/+7
The BCM7038 watchdog driver needs to be able to obtain a specific clock name on BCM63xx platforms which is the "periph" clock ticking at 50MHz. make it possible to specify the clock name to obtain via platform data. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211112224636.395101-4-f.fainelli@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: meson_gxbb_wdt: remove stop_on_rebootArtem Lapkin1-1/+0
Remove watchdog_stop_on_reboot() The Meson platform still has some hardware drivers problems for some configurations which can freeze devices on shutdown/reboot. Remove watchdog_stop_on_reboot() to catch this situation and ensure that the reboot happens anyway. Users who still want to stop the watchdog on reboot can still do so using the watchdog.stop_on_reboot=1 module parameter. https://lore.kernel.org/linux-watchdog/20210729072308.1908904-1-art@khadas.com/T/#t Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211110022518.1676834-1-art@khadas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: Kconfig: fix help text indentationLuca Ceresoli1-24/+24
Some entries indent their help text with 1 tab + 1 space or 1 tab only instead of 1 tab + 2 spaces. Add the missing spaces. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211111225852.3128201-7-luca@lucaceresoli.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Remove superfluous err labelSam Protsenko1-9/+4
'err' label in probe function is not really need, it just returns. Remove it and replace all 'goto' statements with actual returns in place. No functional change here, just a cleanup patch. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-12-semen.protsenko@linaro.org [groeck: Fixed context conflicts] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Support separate source clockSam Protsenko1-15/+41
Right now all devices supported in the driver have the single clock: it acts simultaneously as a bus clock (providing register interface clocking) and source clock (driving watchdog counter). Some newer Exynos chips, like Exynos850, have two separate clocks for that. In that case two clocks will be passed to the driver from the resource provider, e.g. Device Tree. Provide necessary infrastructure to support that case: - use source clock's rate for all timer related calculations - use bus clock to gate/ungate the register interface All devices that use the single clock are kept intact: if only one clock is passed from Device Tree, it will be used for both purposes as before. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-11-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Cleanup PMU related codeSam Protsenko1-25/+58
Now that PMU enablement code was extended for new Exynos SoCs, it doesn't look very cohesive and consistent anymore. Do a bit of renaming, grouping and style changes, to make it look good again. While at it, add quirks documentation as well. No functional change, just a refactoring commit. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211123232613.22438-1-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Add support for WDT counter enable registerSam Protsenko1-1/+27
On new Exynos chips (e.g. Exynos850) new CLUSTERx_NONCPU_OUT register is introduced, where CNT_EN_WDT bit must be enabled to make watchdog counter running. Add corresponding quirk and proper infrastructure to handle that register if the quirk is set. This commit doesn't bring any functional change to existing devices, but merely provides an infrastructure for upcoming chips support. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-9-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Implement a way to invert mask reg valueSam Protsenko1-1/+4
On new Exynos chips (like Exynos850) the MASK_WDT_RESET_REQUEST register is replaced with CLUSTERx_NONCPU_INT_EN, and its mask bit value meaning was reversed: for new register the bit value "1" means "Interrupt enabled", while for MASK_WDT_RESET_REQUEST register "1" means "Mask the interrupt" (i.e. "Interrupt disabled"). Introduce "mask_reset_inv" boolean field in driver data structure; when that field is "true", mask register handling function will invert the value before setting it to the register. This commit doesn't bring any functional change to existing devices, but merely provides an infrastructure for upcoming chips support. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-8-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Extract disable and mask code into separate functionsSam Protsenko1-19/+35
The s3c2410wdt_mask_and_disable_reset() function content is bound to be changed further. Prepare it for upcoming changes by splitting into separate "mask reset" and "disable reset" functions. But keep s3c2410wdt_mask_and_disable_reset() function present as a facade. This commit doesn't bring any functional change to existing devices, but merely provides an infrastructure for upcoming chips support. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-7-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Make reset disable register optionalSam Protsenko1-9/+13
On new Exynos chips (e.g. Exynos850 and Exynos9) the AUTOMATIC_WDT_RESET_DISABLE register was removed, and its value can be thought of as "always 0x0". Add correspondig quirk bit, so that the driver can omit accessing it if it's not present. This commit doesn't bring any functional change to existing devices, but merely provides an infrastructure for upcoming chips support. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-6-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Let kernel kick watchdogSam Protsenko1-11/+15
When "tmr_atboot" module param is set, the watchdog is started in driver's probe. In that case, also set WDOG_HW_RUNNING bit to let watchdog core driver know it's running. This way watchdog core can kick the watchdog for us (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED option is enabled), until user space takes control. WDOG_HW_RUNNING bit must be set before registering the watchdog. So the "tmr_atboot" handling code is moved before watchdog registration, to avoid performing the same check twice. This is also logical because WDOG_HW_RUNNING bit makes WDT core expect actually running watchdog. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-5-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: s3c2410: Fail probe if can't find valid timeoutSam Protsenko1-11/+10
Driver can't work properly if there no valid timeout was found in s3c2410wdt_set_heartbeat(). Ideally, that function should be reworked in a way that it's always able to find some valid timeout. As a temporary solution let's for now just fail the driver probe in case the valid timeout can't be found in s3c2410wdt_set_heartbeat() function. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-4-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: f71808e_wdt: Add F81966 supportAaeonIot1-2/+8
This adds watchdog support the Fintek F81966 Super I/O chip. Testing was done on the Aaeon SSE-OPTI Signed-off-by: AaeonIot <sophiehu@aaeon.com.tw> Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211117024052.2427539-1-acelan.kao@canonical.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: Kconfig: enable MTK watchdogKevin Hilman1-0/+1
Enable CONFIG_MEDIATEK_WATCHDOG when ARCH_MEDIATEK is enabled. On some platforms (e.g. mt8183-pumpkin), watchdog is enabled by bootloader, so kernel driver needs to be enabled to avoid watchdog firing and causing reboot part way through kernel boot. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211103230354.915658-1-khilman@baylibre.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-23watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCsHenning Schild3-0/+240
This driver adds initial support for several devices from Siemens. It is based on a platform driver introduced in an earlier commit. One of the supported machines does access a GPIO pin to enable the watchdog. Here we poke GPIO memory because pinctrl does not come up. Signed-off-by: Henning Schild <henning.schild@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211213120502.20661-4-henning.schild@siemens.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-11-10Merge tag 'linux-watchdog-5.16-rc1' of ↵Linus Torvalds18-764/+334
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - f71808e_wdt: convert to watchdog framework - db8500_wdt: Rename driver (was ux500_wdt.c) - sunxi: Add compatibles for R329 and D1 - mtk: add disable_wdt_extrst support - several other small fixes and improvements * tag 'linux-watchdog-5.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits) watchdog: db8500_wdt: Rename symbols watchdog: db8500_wdt: Rename driver watchdog: ux500_wdt: Drop platform data watchdog: bcm63xx_wdt: fix fallthrough warning watchdog: iTCO_wdt: No need to stop the timer in probe watchdog: s3c2410: describe driver in KConfig watchdog: sp5100_tco: Add support for get_timeleft watchdog: mtk: add disable_wdt_extrst support dt-bindings: watchdog: mtk-wdt: add disable_wdt_extrst support watchdog: rza_wdt: Use semicolons instead of commas watchdog: mlx-wdt: Use regmap_write_bits() watchdog: rti-wdt: Make use of the helper function devm_platform_ioremap_resource() watchdog: iTCO_wdt: Make use of the helper function devm_platform_ioremap_resource() watchdog: ar7_wdt: Make use of the helper function devm_platform_ioremap_resource_byname() watchdog: sunxi_wdt: Add support for D1 dt-bindings: watchdog: sunxi: Add compatibles for D1 ar7: fix kernel builds for compiler test dt-bindings: watchdog: sunxi: Add compatibles for R329 watchdog: meson_gxbb_wdt: add timeout parameter watchdog: meson_gxbb_wdt: add nowayout parameter ...
2021-11-03Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-3/+3
Pull ARM SoC DT updates from Arnd Bergmann: "This is a rather large update for the ARM devicetree files, after a few quieter releases, with 775 total commits and 47 branches pulled into this one. There are 5 new SoC types plus some minor variations, and a total of 60 new machines, so I'm limiting the summary to the main noteworthy items: - Apple M1 gain support for PCI and pinctrl, getting a bit closer to a usable system out of the box. - Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as SM7225, 11 new smartphones, and three additional Chromebooks, and improvements all over the place. - Samsung gains support for ExynosAutov9, an automotive version of their smartphone SoC, but otherwise no major changes. - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number of improvements for the recently added SAMA7 family. The LAN966 SoC that was added in the platform code does not have dts files yet. Two board files are added for the older at91sam9g20 SoC - Aspeed supports two additional server boards using their AST2600 as BMC, and improves support for qemu models - Rockchip RK3566/RK3688 gets added, along with six new development boards using RK3328/RK3399/RK3566, and one Chromebook tablet. - Two NAS boxes are added using the ARMv4 based Gemini platform - One new board is added to the Intel Arria SoC FPGA family - Marvell adds one network switch based on Armada 381 and the new MOCHAbin 7040 development board - NXP adds support for the S32G2 automotive SoC, two imx6 based ebook readers, and three additional development boards, which is notably less than their usual additions, but they also gain improvements to their many existing boards - STmicroelectronics adds their stm32mp13 SoC family along with a reference board - Renesas adds new versions of their R-Car Gen3 SoCs and many updates for their older generations - Broadcom adds support for a number of Cisco Meraki wireless controllers, along with two new boards and other updates for BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards - Mediatek improves support for the MT81xx SoCs used in Chromebooks as well as the MT76xx networking SoCs - NVIDIA adds a number of cleanups and additional support for more hardware on the already supported machines - TI K3 adds support for three new boards along with cleanups - Toshiba adds one board for the Visconti family - Xilinx adds five new ZynqMP based machines - Amlogic support is added for the Radxa Zero and two Jethub home automation controllers, along with changes to other machines - Rob Herring continues his work on fixing dtc warnings all over the tree. - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon, Ux500, Unisoc" * tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits) arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address arm64: dts: apple: t8103: Add root port interrupt routing arm64: dts: apple: t8103: Add PCIe DARTs arm64: apple: Add PCIe node arm64: apple: Add pinctrl nodes ARM: dts: arm: Update ICST clock nodes 'reg' and node names ARM: dts: arm: Update register-bit-led nodes 'reg' and node names arm64: dts: exynos: add chipid node for exynosautov9 SoC ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node ...
2021-11-01watchdog: db8500_wdt: Rename symbolsLinus Walleij1-38/+38
For conistency and clarity, rename all symbols and strings from ux500 to db8500 in the driver. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210922230947.1864357-3-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 04:28:04 +0000