summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2018-04-16aspeed: watchdog: Set bootstatus during probeEddie James1-0/+7
Check the aspeed timeout status register to see if the system has booted from the secondary boot source. If so, set the watchdog device bootstatus flag for "Card previously reset the CPU." Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-04-16watchdog: renesas-wdt: Add support for WDIOF_CARDRESETVeeraiyan Chidambaram1-2/+4
This patch adds the WDIOF_CARDRESET support for the Renesas platform watchdog, to know if the board reboot is due to a watchdog reset. This is done via the WOVF bit (bit 4) of the RWTCSRA register, which indicates if RWTCNT overflowed, triggering the reset in last boot. Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com> [takeshi.kihara.df: changed to read the RWTCSRA register while clock is enabled] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-04-16watchdog: wafer5823wdt: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "Fall through" comment, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-04-16watchdog: w83977f_wdt: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "Fall through" comment, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-04-16watchdog: sch311x_wdt: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I replaced "Fall" with a proper "Fall through" comment, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-04-13Merge tag 'linux-watchdog-4.17-rc1' of ↵Linus Torvalds49-456/+582
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Nuvoton NPCM watchdog driver - renesas_wdt: Add R-Car Gen2 support - renesas_wdt: add suspend/resume and restart handler support - hpwdt: convert to watchdog core and improve NMI - improve timeout setting/handling in various drivers - coh901327: make license text and module licence match - fix error handling in asm9260_wdt, sprd_wdt and davinci_wdt - aspeed imrovements - dw improvements (for control register & suspend/resume) - add SPDX identifiers for watchdog subsystem * tag 'linux-watchdog-4.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits) watchdog: davinci_wdt: fix error handling in davinci_wdt_probe() watchdog: add SPDX identifiers for watchdog subsystem watchdog: aspeed: Allow configuring for alternate boot watchdog: Add Nuvoton NPCM watchdog driver dt-bindings: watchdog: Add Nuvoton NPCM description watchdog: dw: save/restore control and timeout across suspend/resume watchdog: dw: RMW the control register watchdog: sprd_wdt: Fix error handling in sprd_wdt_enable() watchdog: aspeed: Fix translation of reset mode to ctrl register watchdog: renesas_wdt: Add restart handler watchdog: renesas_wdt: Add R-Car Gen2 support watchdog: renesas_wdt: Add suspend/resume support watchdog: f71808e_wdt: Fix WD_EN register read watchdog: hpwdt: Update driver version. watchdog: hpwdt: Add dynamic debug watchdog: hpwdt: Programable Pretimeout NMI watchdog: hpwdt: remove allow_kdump module parameter. watchdog: hpwdt: condition early return of NMI handler on iLO5 watchdog: hpwdt: Modify to use watchdog core. watchdog: hpwdt: Update nmi_panic message. ...
2018-04-05Merge tag 'gpio-v4.17-1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.17 kernel cycle: New drivers: - Nintendo Wii GameCube GPIO, known as "Hollywood" - Raspberry Pi mailbox service GPIO expander - Spreadtrum main SC9860 SoC and IEC GPIO controllers. Improvements: - Implemented .get_multiple() callback for most of the high-performance industrial GPIO cards for the ISA bus. - ISA GPIO drivers now select the ISA_BUS_API instead of depending on it. This is merged with the same pattern for all the ISA drivers and some other Kconfig cleanups related to this. Cleanup: - Delete the TZ1090 GPIO drivers following the deletion of this SoC from the ARM tree. - Move the documentation over to driver-api to conform with the rest of the kernel documentation build. - Continue to make the GPIO drivers include only <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we want to get rid of. - Managed to remove VLA allocation from two drivers pending more fixes in this area for the next merge window. - Misc janitorial fixes" * tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: Add Spreadtrum PMIC EIC driver support gpio: Add Spreadtrum EIC driver support dt-bindings: gpio: Add Spreadtrum EIC controller documentation gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe() pinctrl: qcom: Don't allow protected pins to be requested gpiolib: Support 'gpio-reserved-ranges' property gpiolib: Change bitmap allocation to kmalloc_array gpiolib: Extract mask allocation into subroutine dt-bindings: gpio: Add a gpio-reserved-ranges property gpio: mockup: fix a potential crash when creating debugfs entries gpio: pca953x: add compatibility for pcal6524 and pcal9555a gpio: dwapb: Add support for a bus clock gpio: Remove VLA from xra1403 driver gpio: Remove VLA from MAX3191X driver gpio: ws16c48: Implement get_multiple callback gpio: gpio-mm: Implement get_multiple callback gpio: 104-idi-48: Implement get_multiple callback gpio: 104-dio-48e: Implement get_multiple callback gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks gpio: pci-idio-16: Implement get_multiple callback ...
2018-04-02Merge tag 'arch-removal' of ↵Linus Torvalds3-505/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-03-26Merge branch 'v4.17-rc1'Wim Van Sebroeck1-4/+11
2018-03-26watchdog: davinci_wdt: fix error handling in davinci_wdt_probe()Alexey Khoroshilov1-4/+11
clk_disable_unprepare() was added to one error path, but there is another one. The patch makes sure clk is disabled at the both of them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-26watchdog: remove bfin_wdt driverArnd Bergmann3-492/+0
The blackfin architecture is getting removed, so this driver has become obsolete. Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26treewide: simplify Kconfig dependencies for removed archsArnd Bergmann2-12/+0
A lot of Kconfig symbols have architecture specific dependencies. In those cases that depend on architectures we have already removed, they can be omitted. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-24Merge branch 'v4.17-rc1'Wim Van Sebroeck32-210/+301
2018-03-24watchdog: add SPDX identifiers for watchdog subsystemMarcus Folkesson28-210/+31
- Add SPDX identifier - Remove boiler plate license text - If MODULE_LICENSE and boiler plate does not match, go for boiler plate license Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Mans Rullgard <mans@mansr.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-24watchdog: aspeed: Allow configuring for alternate bootMilton Miller1-0/+4
Allow the device tree to specify a watchdog to fallover to the alternate boot source. The aspeeed watchdog can set a latch directing flash chip select 0 to chip select 1, allowing boot from an alternate media if the watchdog is not reset in time. On the ast2400 bank 1 also goes to flash bank 1, while on the ast2500 the chip selects are swapped. Also clear the secondary boot bit during the machine restart operation. Otherwise, the system will switch to the alternate boot after every reboot, which is not desired. Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-24watchdog: Add Nuvoton NPCM watchdog driverJoel Stanley3-0/+266
The Nuvoton NPCM750 has a watchdog implemented as a single register inside the timer peripheral. This driver exposes that watchdog as a standard watchdog device with coarse timeout intervals, limited by the combination of prescaler and counter that is provided by the hardware. The calculation is taken from the Nuvoton vendor tree. The watchdog is left running if a bootloader had it going. The rate is the one specified in the device tree, or the default value (obtained from the datasheet). There is a pre-timeout IRQ that is wired up. This timeout always occurs 1024 clocks before the timeout. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-19ACPI / watchdog: Fix off-by-one error at resource assignmentTakashi Iwai1-1/+1
The resource allocation in WDAT watchdog has off-one-by error, it sets one byte more than the actual end address. This may eventually lead to unexpected resource conflicts. Fixes: 058dfc767008 (ACPI / watchdog: Add support for WDAT hardware watchdog) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18Merge tag 'v4.16-rc5' into develLinus Walleij4-494/+17
Linux 4.16-rc5 merged into the GPIO devel branch to resolve a nasty conflict between fixes and devel in the RCAR driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-13Merge branch 'v4.16-fixes'Wim Van Sebroeck3-12/+33
2018-03-13watchdog: dw: save/restore control and timeout across suspend/resumeBrian Norris1-0/+9
Some platforms lose this state in suspend. It should be safe to do this unconditionally. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-13watchdog: dw: RMW the control registerBrian Norris1-8/+15
RK3399 has rst_pulse_length in CONTROL_REG[4:2], determining the length of pulse to issue for system reset. We shouldn't clobber this value, because that might make the system reset ineffective. On RK3399, we're seeing that a value of 000b (meaning 2 cycles) yields an unreliable (partial?) reset, and so we only fully reset after the watchdog fires a second time. If we retain the system default (010b, or 8 clock cycles), then the watchdog reset is much more reliable. Read-modify-write retains the system value and improves reset reliability. It seems we were intentionally clobbering the response mode previously, to ensure we performed a system reset (we don't support an interrupt notification), so retain that explicitly. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-13watchdog: sprd_wdt: Fix error handling in sprd_wdt_enable()Alexey Khoroshilov1-1/+3
If clk_prepare_enable(wdt->rtc_enable) fails, wdt->enable clock is left enabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-13watchdog: aspeed: Fix translation of reset mode to ctrl registerMilton Miller1-3/+6
Assert RESET_SYSTEM bit for any reset and set MODE field from reset type. The watchdog control register has a RESET_SYSTEM bit that is really closer to activate a reset, and RESET_SYSTEM_MODE field that chooses how much to reset. Before this patch, a node without these optional property would do a SOC reset, but a node with properties requesting a cpu or SOC reset would do nothing and a node requesting a system reset would do a SOC reset. Fixes: b7f0b8ad25f3 ("drivers/watchdog: ASPEED reference dev tree properties for config") Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-10Merge branch 'v4.16-fixes'Wim Van Sebroeck1-1/+1
2018-03-10watchdog: renesas_wdt: Add restart handlerFabrizio Castro1-0/+12
On iWave's boards iwg20d and iwg22d the only way to reboot the system is by means of the watchdog. This patch adds a restart handler to rwdt_ops, and also makes sure we keep its priority to the lowest level, in order to not override other more effective handlers. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-10watchdog: renesas_wdt: Add R-Car Gen2 supportFabrizio Castro1-5/+44
Due to commits: * "ARM: shmobile: Add watchdog support", * "ARM: shmobile: rcar-gen2: Add watchdog support", and * "soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2", we now have everything we needed for the watchdog to work on Gen2 and RZ/G1. However, on early revisions of some R-Car Gen2 SoCs, and depending on SMP configuration, the system may fail to restart on watchdog time-out, and lock up instead. Specifically: - On R-Car H2 ES1.0 and M2-W ES1.0, watchdog restart fails unless only the first CPU core is in use (using e.g. the "maxcpus=1" kernel commandline option). - On R-Car V2H ES1.1, watchdog restart fails unless SMP is disabled completely (using CONFIG_SMP=n during build configuration, or using the "nosmp" or "maxcpus=0" kernel commandline options). This commit adds "renesas,rcar-gen2-wdt" as compatible string for R-Car Gen2 and RZ/G1, but also prevents the system from using the watchdog driver in cases where the system would fail to restart by blacklisting the affected SoCs, using the minimum known working revisions (ES2.0 on R-Car H2, and ES3.0 on M2-W), and taking the actual SMP software configuration into account. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> [Geert: blacklisting logic] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-10watchdog: renesas_wdt: Add suspend/resume supportFabrizio Castro1-0/+26
On R-Car Gen2 and RZ/G1 the watchdog IP clock needs to be always ON, on R-Car Gen3 we power the IP down during suspend. This commit adds suspend/resume support, so that the watchdog counting "pauses" during suspend on all of the SoCs compatible with this driver and on those we are now adding support for (R-Car Gen2 and RZ/G1). Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-10watchdog: f71808e_wdt: Fix WD_EN register readIgor Pylypiv1-1/+1
F71808FG_FLAG_WD_EN defines bit position, not a bitmask Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
2018-03-07Merge tag 'metag_remove_2' of ↵Arnd Bergmann1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag into asm-generic Remove metag architecture These patches remove the metag architecture and tightly dependent drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4 based metag toolchain we have been using is hitting compiler bugs, so now seems a good time to drop it altogether. * tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: i2c: img-scb: Drop METAG dependency media: img-ir: Drop METAG dependency watchdog: imgpdc: Drop METAG dependency MAINTAINERS/CREDITS: Drop METAG ARCHITECTURE tty: Remove metag DA TTY and console driver clocksource: Remove metag generic timer driver irqchip: Remove metag irqchip drivers Drop a bunch of metag references docs: Remove remaining references to metag docs: Remove metag docs metag: Remove arch/metag/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-05watchdog: imgpdc: Drop METAG dependencyJames Hogan1-1/+1
Now that arch/metag/ has been removed, remove the METAG dependency from the IMG IR device driver. The hardware is also present on MIPS SoCs so the driver still has value. Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: linux-watchdog@vger.kernel.org Cc: linux-metag@vger.kernel.org
2018-03-03watchdog: hpwdt: Update driver version.Jerry Hoemann1-1/+1
Update driver version number to reflect changes. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: hpwdt: Add dynamic debugJerry Hoemann1-0/+11
Add a few dynamic debug messages to aid in module level debug. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: hpwdt: Programable Pretimeout NMIJerry Hoemann1-4/+49
Make whether or not the hpwdt watchdog delivers a pretimeout NMI programable by the user. The underlying iLO hardware is programmable as to whether or not a pre-timeout NMI is delivered to the system before the iLO resets the system. However, the iLO does not allow for programming the length of time that NMI is delivered before the system is reset. By watchdog API, in hpwdt_set_pretimeout a val == 0 disables the NMI. When val != 0, hpwdt_set_pretimeout will enable the pretimeout NMI provided the current timeout is greator than the HW specified pretimeout length. Otherwise an error is returned. In set_timeout, if the new timeout is <= an already established pretimeout, the pretimeout is canceled. This matches the action watchdog_set_timeout in the watchdog core would do if an hpwdt specific set_timeout function wasn't specified. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: hpwdt: remove allow_kdump module parameter.Jerry Hoemann1-13/+3
The intent of this parameter is unclear and it sets up a race between the reset of the system by ASR and crashdump. The length of time between receipt of the pretimeout NMI and the ASR reset of the system is fixed by hardware. Turning the parameter off doesn't necessairly prevent a crash dump. Also, having the ASR reset occur while the system is crash dumping doesn't imply that the dump was hung given the short duration between the NMI and the reset. This parameter is not a substitute for having a architected watchdog crashdump hang detection paridigm. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: hpwdt: condition early return of NMI handler on iLO5Jerry Hoemann1-1/+5
Modify prior change to not claim an NMI unless originated from iLO to apply only to iLO5 and later going forward. This restores hpwdt traditional behavior of calling panic if the NMI is NMI_IO_CHECK, NMI_SERR, or NMI_UNKNOWN for legacy hardware. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: hpwdt: Modify to use watchdog core.Jerry Hoemann2-169/+48
Follow Documentation/watchdog/convert_drivers_to_kernel_api.txt to convert hpwdt from legacy watchdog driver to use the watchdog core. Removed functions: hpwdt_open, hpwdt_release, hpwdt_write, hpwdt_ioctl Removed data structures: hpwdt_fops, hpwdt_miscdev, watchdog_device Modified functions: hpwdt_start, hpwdt_stop, hpwdt_ping, hpwdt_gettimeleft Added functions: hpwdt_settimeout Added structures: watchdog_device Update Kconfig file to show that hpwdt now selects WATCHDOG_CORE. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: hpwdt: Update nmi_panic message.Jerry Hoemann1-8/+12
Include the nmistat in the nmi_panic message to give support an indication why the NMI was called (e.g. a timeout or generate nmi button.) Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: hpwdt: Update Module info and copyright.Jerry Hoemann1-2/+2
Update Copyright and Module description to reflect branding changes. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: asm9260_wdt: fix error handling in asm9260_wdt_probe()Alexey Khoroshilov1-4/+4
If devm_reset_control_get_exclusive() fails, asm9260_wdt_probe() returns immediately. But clks has been already enabled at that point, so it is required to disable them or to move the code around. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: coh901327: make license text and module licence matchMarcus Folkesson1-2/+2
Licence text is specifying "GPLv2" but the MODULE_LICENSE is set to "GPLv2 or later". See include/linux/module.h: "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] When on it, add SPDX identifier tag. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: lpc18xx: remove assignment of unused ret-valueMarcus Folkesson1-1/+1
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: gpio: change order for setting default timeoutMarcus Folkesson1-2/+2
watchdog_init_timeout() will preserve wdd->timeout value if no parameter nor timeout-secs dt property is set. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: omap_wdt: change order for setting default timeoutMarcus Folkesson1-2/+2
watchdog_init_timeout() will preserve wdd->timeout value if no parameter nor timeout-secs dt property is set. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: uniphier: change order for setting default timeoutMarcus Folkesson1-3/+2
watchdog_init_timeout() will preserve wdd->timeout value if no parameter nor timeout-secs dt property is set. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: coh901327: make use of timeout-secs provided in devicetreeMarcus Folkesson1-6/+8
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. Following best practice described in Documentation/watchdog/watchdog-kernel-api.txt to make use of the parameter logic. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: meson: allow setting timeout in devicetreeMarcus Folkesson1-1/+1
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: mtk: allow setting timeout in devicetreeMarcus Folkesson1-1/+1
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: pnx4008: make use of timeout-secs provided in devicetreeMarcus Folkesson1-1/+1
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. Following best practice described in Documentation/watchdog/watchdog-kernel-api.txt to make use of the parameter logic. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: sirfsoc: allow setting timeout in devicetreeMarcus Folkesson1-1/+1
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-03watchdog: sunxi: allow setting timeout in devicetreeMarcus Folkesson1-1/+1
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 16:40:37 +0000