summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2015-03-06watchdog: at91sam9: request the irq with IRQF_NO_SUSPENDBoris BREZILLON1-1/+2
The watchdog interrupt (only used when activating software watchdog) shouldn't be suspended when entering suspend mode, because it is shared with a timer device (which request the line with IRQF_NO_SUSPEND) and once the watchdog "Mode Register" has been written, it cannot be changed (which means we cannot disable the watchdog interrupt when entering suspend). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-17watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X archRafał Miłecki1-1/+1
BCM5301X (ARCH_BCM_5301X) is a new Broadcom architecture using the same SoC bus driver (bcma) as BCM47XX but based on ARM instead of MIPS. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: jz4740: Add DT supportZubair Lutfullah Kakakhel1-0/+10
Add DT support to the jz4740 driver. Simple of_match_ptr. No other modification for probe needed Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: dw_wdt: Try to get a 30 second watchdog by defaultDoug Anderson1-2/+4
The dw_wdt_set_top() function takes in a value in seconds. In dw_wdt_open() we were calling it with a value that's supposed to represent the maximum value programmed into the "top" register with a comment saying that we were trying to set the watchdog to its maximum value. Instead we ended up setting the watchdog to ~15 seconds. Let's fix this. However, setting things to the "max" gives me an 86 second watchdog in the system I'm looking at. 86 seconds feels a little too long. We'll explicitly choose 30 seconds as a more reasonable value. NOTE: Ideally this driver should be transitioned to be a real watchdog driver. Then we could use "watchdog_init_timeout" and let the timeout be specified in a number of ways (device tree, module parameter, etc). This patch should be considered a bit of a stopgap solution. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: dw_wdt: pat the watchdog before enabling itDoug Anderson1-7/+19
On some dw_wdt implementations the "top" register may be initted to 0 at bootup. In such a case, each "pat" of the watchdog will reset the timer to 0xffff. That's pretty short. The input clock of the wdt can be any of a wide range of values. On an rk3288 system, I've seen the wdt clock be 24.75 MHz. That means each tick is ~40ns and we'll count to 0xffff in ~2.6ms. Because of the above two facts, it's a really good idea to pat the watchdog after initting the "top" register properly and before enabling the watchdog. If you don't then there's no way we'll get the next heartbeat in time. Jisheng Zhang fixed this problem on some dw_wdt versions by using the TOP_INIT feature. However, the dw_wdt on rk3288 doesn't have TOP_INIT so it's a good idea to also pat the watchdog manually. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792Guenter Roeck2-1/+15
The watchdog functionality in both chips is almost identical to NCT6779. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: bcm47xx_wdt.c: add restart handler supportRafał Miłecki1-1/+20
Just like in case of other watchdog drivers, use the new kernel core API to provide restart support. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: gpio_wdt: Add "always_running" feature to GPIO watchdogMike Looijmans1-8/+29
On some chips, like the TPS386000, the trigger cannot be disabled and the CPU must keep toggling the line at all times. Add a switch "always_running" to keep toggling the GPIO line regardless of the state of the soft part of the watchdog. The "armed" member keeps track of whether a timeout must also cause a reset. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: da9063: Add restart handler supportGeert Uytterhoeven1-1/+31
Register a restart handler for the da9063 watchdog. System restart is triggered by sending the shutdown command to the PMIC. As more-suitable restart handlers may exist, the priority of the watchdog restart handler is set to 128. The actual restart method was inspired by a platform-specific patch from the BSP by Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: Add driver for Mediatek watchdogMatthias Brugger3-0/+262
This patch adds a driver for the Mediatek SoC integrated watchdog. This driver supports watchdog and software reset for mt65xx and mt81xx SoCs. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Tested-by: Eddie Huang <eddie.huang@mediatek.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: Fix omap watchdogs to enable the magic close bitTony Lindgren3-3/+3
This allows testing the watchdog easily with distros just by doing pkill -9 watchdog. Reported-by: Thomas Dziedzic <gostrc@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: rt2880_wdt: minor clean upJohn Crispin1-3/+6
Replace device_reset() with devm_reset_control_get() + reset_control_deassert(). Make use of watchdog_init_timeout() instead of setting the timeout manually. Signed-off-by: John Crispin <blogic@openwrt.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: hpwdt: Fix initialization message in hpwdt.cMasanari Iida1-1/+1
allow_kdump was enabled as default since following commit. commit a089361cf5f1d6a5295aa5385238bd044998e1e9, watchdog: hpwdt: Unregister NMI events on exit. But the initialization message was not modified. So it still shows HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF) <= This "default = 0/OFF" message may confuse users. Fix it as "default = 1/ON". Signed-off-by: Masanari Iida <standby24x7@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: it87_wdt: add IT8783 IDPaolo Teti1-2/+4
IT8783 watchdog works as in IT872x Tested on Adlink cPCI-6520 boards Signed-off-by: Paolo Teti <paolo.teti@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: imx2: Constify struct regmap_config and watchdog_opsKrzysztof Kozlowski1-2/+2
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Make struct watchdog_ops const as well. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: ImgTec PDC Watchdog Timer DriverNaidu Tellapati3-0/+301
This commit adds support for ImgTec PowerDown Controller Watchdog Timer. Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Signed-off-by: Jude Abraham <Jude.Abraham@imgtec.com> [ezequiel: Minor style fixes] Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-01-21watchdog: drop owner assignment from platform_driversWolfram Sang2-2/+0
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-01-21watchdog: imx2_wdt: Disable power down counter on bootMarkus Pargmann1-0/+9
Disable power down counter of the watchdog to avoid system resets. The watchdog power down counter is set automatically by the chip. If it is not set to 0 in the driver, the system resets. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-01-21watchdog: imx2_wdt: Improve power management support.Xiubo Li1-9/+22
Improve power management operations(suspend and resume) as part of dev_pm_ops for IMX2 watchdog driver. If PM will be supported, please make sure that the wdev->clk could disable the watchdog's counter input clock source or can mask watchdog's reset request to the core. If watchdog is still used by consumers and resumes from deep sleep state, we need to restart the watchdog again without enabling the timer. If watchdog been has started --> stopped by the consumers and resumes from non-deep sleep state, then start the timer again. If watchdog has been started --> stopped by the consumers and resumes from deep sleep state, will do nothing. The watchdog will be restarted by consumers next time to be used. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-18watchdog: imx2_wdt: Fix the argument of watchdog_active()Fabio Estevam1-1/+1
Fix the following build warning by passing the expected argument type to watchdog_active(): drivers/watchdog/imx2_wdt.c: In function 'imx2_wdt_suspend': drivers/watchdog/imx2_wdt.c:340:2: warning: passing argument 1 of 'watchdog_active' from incompatible pointer type [enabled by default] In file included from drivers/watchdog/imx2_wdt.c:38:0: include/linux/watchdog.h:104:20: note: expected 'struct watchdog_device *' but argument is of type 'struct watchdog_device **' Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-18watchdog: imx2_wdt: Add power management support.Xiubo Li1-0/+47
Add power management operations(suspend and resume) as part of dev_pm_ops for IMX2 watchdog driver. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds54-54/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-10Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-1/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "The time(r) departement provides: - more infrastructure work on the year 2038 issue - a few fixes in the Armada SoC timers - the usual pile of fixlets and improvements" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: armada-370-xp: Use the reference clock on A375 SoC watchdog: orion: Use the reference clock on Armada 375 SoC clocksource: armada-370-xp: Add missing clock enable time: Fix sign bug in NTP mult overflow warning time: Remove timekeeping_inject_sleeptime() rtc: Update suspend/resume timing to use 64bit time rtc/lib: Provide y2038 safe rtc_tm_to_time()/rtc_time_to_tm() replacement time: Fixup comments to reflect usage of timespec64 time: Expose get_monotonic_coarse64() for in-kernel uses time: Expose getrawmonotonic64 for in-kernel uses time: Provide y2038 safe mktime() replacement time: Provide y2038 safe timekeeping_inject_sleeptime() replacement time: Provide y2038 safe do_settimeofday() replacement time: Complete NTP adjustment threshold judging conditions time: Avoid possible NTP adjustment mult overflow. time: Rename udelay_test.c to test_udelay.c clocksource: sirf: Remove hard-coded clock rate
2014-12-09Merge tag 'at91-cleanup-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup on mach-at91 from Arnd Bergmann: "On Atmel AT91, the conversion to device tree is now considered complete, and all machines that were not already converted in 3.18 are assumed to be unused and dropped by the maintainer. All remaining board files that were written in C are dropped, and the ancient at91x40 sub-platform (based on an MMU-less ARM7) is removed altogether. Cleaning up the last pieces was great fun, so I took the time to do some of the coding myself and removed several hundred code lines that ended up unused after the board files were done. There are still a couple of AT91 specific device drivers that are not converted to DT (CF, USB-OTG) and currently not working, and the platform itself is not "multiplatform"-enabled, but both issues are going to be taken care of in the 3.20 cycle. This is split out from the other cleanups purely based on the size of the branch" * tag 'at91-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits) ARM: at91: remove unused board.h file ARM: at91: remove unneeded header files ARM: at91/clocksource: remove !DT PIT initializations ARM: at91: at91rm9200 ST initialization is now DT only ARM: at91: remove old AT91-specific drivers ARM: at91: cleanup initilisation code by removing dead code ARM: at91/Kconfig: select board files automatically ARM: at91: remove unused IRQ function declarations ARM: at91: remove legacy IRQ driver and related code ARM: at91: remove old at91-specific clock driver ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c files ARM: at91: remove all !DT related configuration options ARM: at91/trivial: update Kconfig comment to mention SAMA5 ARM: at91: always USE_OF from now on ARM: at91/Kconfig: remove ARCH_AT91RM9200 option for drivers ARM: at91: switch configuration option to SOC_AT91RM9200 ARM: at91: remove at91rm9200 legacy board support ARM: at91: remove at91rm9200 legacy boards files ARM: at91/Kconfig: remove useless fbdev Kconfig options ARM: at91: remove at91sam9261/at91sam9g10 legacy board support ...
2014-12-05watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7Abhilash Kesavan1-1/+1
The watchdog mask bit offset listed for Exynos7 is incorrect. Fix this. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Naveen Krishna Chatradhi <naveenkrishna.ch@gmail.com Reviewd-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-11-27Merge branch 'clockevents/3.19' of ↵Thomas Gleixner1-1/+41
http://git.linaro.org/people/daniel.lezcano/linux into timers/core Daniel Lezcano muttered: * Marvell timer updates from Ezequiel Garcia - Add missing clock enable calls for armada - Change source clock for clocksource and watchdog * SIRF timer updates from Yanchang Li - Make clock rate configurable
2014-11-26ARM: at91/Kconfig: remove ARCH_AT91RM9200 option for driversNicolas Ferre1-2/+2
The precise selection is useless, so we simply remove these dependencies. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-26watchdog: orion: Use the reference clock on Armada 375 SoCEzequiel Garcia1-1/+41
The 25 MHz reference clock has better stability so its use is prefered over the core clock. Change the Armada 375 clock initialization to use this reference clock. To ensure the driver is compatible with an old devicetree, also provide a fallback path which will silently return to the previous behavior. While here, add the clock specification to the binding documentation. Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman54-54/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-20watchdog: meson: remove magic value for rebootCarlo Caione1-1/+1
This patch removes the magic value used for rebooting the board. This value is useless and leads to a static checker warning as reported by Dan Carpenter. Signed-off-by: Carlo Caione <carlo@caione.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEMChen Gang1-1/+2
They need HAS_IOMEM, so let them depend on it, the related error (with allmodconfig under um): MODPOST 1205 modules ERROR: "devm_ioremap_resource" [drivers/watchdog/tegra_wdt.ko] undefined! ERROR: "devm_ioremap_resource" [drivers/watchdog/of_xilinx_wdt.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: sunxi: Add A31 watchdog supportChen-Yu Tsai1-0/+10
This patch adds support for the watchdog hardware found in A31 and newer SoCs. This new hardware has registers at different offsets, and the system reset control has been split out of the "mode" register into a new "configuration" register. Differences not supported by this driver include separate interrupt lines for each watchdog, instead of sharing an interrupt line and registers with the timer block. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: sunxi: support parameterized compatible stringsChen-Yu Tsai1-25/+76
This patch adds support for hardware parameters tied to compatible strings, so similar hardware can reuse the driver. This will be used to support the newer watchdog found in A31 and later SoCs. Differences in the new hardware include separate interrupt lines for each watchdog, and corresponding interrupt control/status registers. Watchdog control registers were also slightly rearranged. Also replace ioread32()/iowrite32() with readl()/writel() in various places changed. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-10-20watchdog: imx2_wdt: add restart handler supportJingchang Lu1-0/+37
Register the watchdog as the system restart function to the new introducing kernel restart call chain in the driver instead of providing the restart in machine desc. This restart handler function is from the mxc_restart() in arch/arm/mach-imx/system.c Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: qcom: register a restart notifierJosh Cartwright1-0/+38
The WDT's BITE_TIME warm-reset behavior can be leveraged as a last resort mechanism for triggering chip reset. Usually, other restart methods (such as PS_HOLD) are preferrable for issuing a more complete reset of the chip. As such, keep the priority of the watchdog notifier low. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: s3c2410: add restart handlerHeiko Stuebner1-0/+36
On a lot of Samsung systems the watchdog is responsible for restarting the system and until now this code was contained in plat-samsung/watchdog-reset.c. With the introduction of the restart handlers, this code can now move into driver itself, removing the need for arch-specific code. Tested on a S3C2442 based GTA02 Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-10-20watchdog: dw_wdt: add restart handler supportJisheng Zhang1-0/+32
The kernel core now provides an API to trigger a system restart. Register with it to support restarting the system via. watchdog. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20ARM: meson: add watchdog driverCarlo Caione3-0/+247
This patch adds the watchdog driver for the Amlogic Meson SoCs used also to reboot the device. Signed-off-by: Carlo Caione <carlo@caione.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20stmp3xxx_rtc_wdt: Add suspend/resume PM supportJanusz Uzycki1-0/+24
There is no conflict with rtc/rtc-stmp3xxx.c parent because modified registers in PM functions of stmp3xxx_rtc_wdt are different. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: Add DA9063 PMIC watchdog driver.Krystian Garbaciak3-0/+201
This driver supports the watchdog device inside the DA9063 PMIC. Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: add driver for Ricoh RN5T618 watchdogBeniamino Galvani3-0/+210
This adds a driver for the watchdog timer available in Ricoh RN5T618 PMIC. The device supports a programmable expiration time of 1, 8, 32 or 128 seconds. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7Naveen Krishna Chatradhi1-0/+11
Exynos7 SoC has a Watchdog for Atlas (A57) cores This patch adds support for the Atlas watchdog. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: qcom: add support for KPSS WDTJosh Cartwright3-0/+200
Add a driver for the watchdog timer block found in the Krait Processor Subsystem (KPSS) on the MSM8960, APQ8064, and IPQ8064. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top()Jisheng Zhang1-1/+3
The TOP_INIT, ie bit 4-7 of the WDOG_TIMEOUT_RANGE_REG_OFFSET register may be zero, so the timeout period may be very short after initialization is done, thus the system may be reset soon after enabling. We fix this problem by also initialising the TOP_INIT when setting TOP in function dw_wdt_set_top(). Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: Add Cadence WDT driverHarini Katakam3-0/+525
Add Cadence WDT driver. This is used by Xilinx Zynq. Signed-off-by: Harini Katakam <harinik@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: imx2_wdt: Convert to use regmap framework's endianness method.Xiubo Li1-6/+0
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: ts72xx_wdt: Kill superfluous variable in removeMika Westerberg1-5/+1
There is no need to store the return value of misc_deregister() in a variable. Instead we can just return the value directly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20powerpc: booke_wdt: Fix build error as a modulePranith Kumar1-23/+5
Building booke_wdt fails when trying to build as a module as there is no early_param() in module. Fix by using module_param() instead of early_param(). Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: xilinx: Remove .owner field for driverMichal Simek1-1/+0
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: drop owner assignment from platform_driversWolfram Sang55-55/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 00:01:50 +0000