summaryrefslogtreecommitdiffstats
path: root/drivers/w1
AgeCommit message (Collapse)AuthorFilesLines
2008-02-07DS1WM: decouple host IRQ and INTR active state settingsPhilipp Zabel1-4/+5
The DS1WM driver incorrectly infers the IAS bit (1-wire interrupt active high) from IRQ settings. There are devices that have IAS=0 but still need the IRQ to trigger on a rising edge. With this patch, machines with DS1WM that need IAS=1 have to set .active_high=1 in the ds1wm_platform_data. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Acked-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06w1-gpio: add GPIO w1 bus master driverVille Syrjala3-0/+135
Add a GPIO 1-wire bus master driver. The driver used the GPIO API to control the wire and the GPIO pin can be specified using platform data similar to i2c-gpio. The driver was tested with AT91SAM9260 + DS2401. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06W1: w1_therm.c standardize units to millidegrees CDavid Fries1-1/+2
Standardize the temperature units to millidegrees C for the two sensor conversion routines. Previously the routines were, w1_DS18B20_convert_temp degrees C w1_DS18S20_convert_temp millidegrees C Unfortunately this will break any program using the ds18b20 value as it will now be 1000 times bigger. Fortunately there can't be that many users out there, or some of these bugs will have been fixed by now, such as the negative C error (see previous patch) that makes me think the ds18b20 is the better choice to change because of the current bugs. Signed-off-by: David Fries <david@fries.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06w1: remove unused and confusing variable.Evgeniy Polyakov1-4/+0
Remvoe variable which actually is not used (except assigning it a value) and confusing break out of the family checking loop. Found by Harry Mason. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Harry J Mason <hjm03r@ecs.soton.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-27i2c: normal_i2c can be made const (remaining drivers)Jean Delvare1-1/+1
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-22W1: w1_therm.c is flagging 0C etc as invalidDavid Fries1-1/+1
The extra rom[0] check is flagging valid temperatures as invalid when there is already a CRC data transmission check. w1_therm_read_bin() if (rom[8] == crc && rom[0]) verdict = 1; Requiring rom[0] to be non-zero will flag as invalid temperature conversions when the low byte is zero, specifically the temperatures 0C, 16C, 32C, 48C, -16C, -32C, and -48C. The CRC check is produced on the device for the previous 8 bytes and is required to ensure the data integrity in transmission. I don't see why the extra check for rom[0] being non-zero is in there. Evgeniy Polyakov didn't know either. Just for a check I unplugged the sensor, executed a temperature conversion, and read the results. The read was all ff's, which also failed the CRC, so it doesn't need to protect against a disconnected sensor. I have more extensive patches in the work, but these two trivial ones will do for today. I would like to hear from people who use the ds2490 USB to one wire dongle. 1 if you would be willing to test the patches as I currently only have the one sensor on a short parisite powered wire, 2 if there is any cheap sources for the ds2490. Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-22W1: w1_therm.c ds18b20 decode freezing temperatures correctlyDavid Fries1-1/+1
Correct the decoding of negative C temperatures. The code did a binary OR of two bytes to make a 16 bit value, but assignd it to an integer. This caused the value to not be sign extended and to loose that it was a negative number in the assignment. Before the patch (in my freezer), w1_slave ed fe 4b 46 7f ff 03 10 e4 : crc=e4 YES ed fe 4b 46 7f ff 03 10 e4 t=4078 With the patch, e3 fe 4b 46 7f ff 0d 10 81 : crc=81 YES e3 fe 4b 46 7f ff 0d 10 81 t=-17 Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14w1: decrement slave counter only in ->release() callbackEvgeniy Polyakov1-4/+2
Decrement the slave counter only in ->release() callback instead of both in ->release() and w1 control. Patch is based on debug work and preliminary patch made by Henri Laakso. Henri noticed in debug that this counter becomes negative after w1 slave device is physically removed. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Henri Laakso <henri.laakso@wapice.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14W1: fix memset size errorLi Zefan1-1/+1
The size argument passed to memset is wrong. Signed-off-by Li Zefan <lizf@cn.fujitsu.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-30Kbuild/doc: fix links to Documentation filesDirk Hohndel1-1/+2
Fix links to files in Documentation/* in various Kconfig files Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches1-1/+1
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Clean up duplicate includes in drivers/w1/Jesper Juhl1-1/+0
This patch cleans up duplicate includes in drivers/w1/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers1-12/+7
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-25missing null termination in one wire ueventStephen Hemminger1-0/+1
Need to null terminate environment. Found by inspection while looking for similar problems to platform uevent bug Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22w1: fix w1_remove_master_device() searchingEvgeniy Polyakov1-4/+6
In case bus master driver provided bogus value as its private data, search can be incorrect. Problem found by Adrian Bunk. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26drivers/ misc __iomem annotationsAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau4-8/+4
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki1-0/+1
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Use menuconfig objects: W1Jan Engelhardt3-14/+9
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15git-battery vs git-acpiAndrew Morton1-2/+3
drivers/w1/slaves/w1_ds2760.c:85: warning: initialization from incompatible pointer type The ACPI guys changed the bin_attr APIs (commit 91a6902958f052358899f58683d44e36228d85c2) Cc: Anton Vorontsov <cbou@mail.ru> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-07-15Power supply class and drivers: remove non obligatory return statementsAnton Vorontsov1-4/+0
Per Jeff Garzik request. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2007-07-11sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui3-9/+20
sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11sysfs: kill unnecessary attribute->ownerTejun Heo3-4/+0
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10[BATTERY] ds2760 W1 slaveAnton Vorontsov5-0/+278
This is W1 slave for ds2760 chip, found inside almost every HP iPaq and HTC PDAs/phones. Signed-off-by: Anton Vorontsov <cbou@mail.ru> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28w1_therm_read_bin: don't call flush_signals()Evgeniy Polyakov1-5/+1
This can disrupt userspace signal management. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10[S390] Kconfig: menus with depends on HAS_IOMEM.Martin Schwidefsky1-0/+1
Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-08Driver for the Maxim DS1WM, a 1-wire bus master ASIC coreakpm@linux-foundation.org3-1/+477
Cc: Matt Reimer <mreimer@vpop.net> [akpm@linux-foundation.org: kconfig update] Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08w1: allow bus master to have reset and byte opsEvgeniy Polyakov1-1/+2
Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08W1 printk format warning fixEvgeniy Polyakov1-1/+1
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] w1: Use ARRAY_SIZE macro when appropriateAhmed S. Darwish1-3/+3
A patch to use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-13[PATCH] w1: Fix for kconfig entry typoEvgeniy Polyakov1-2/+2
Based on patch from Alexander Rigbo <alexander.rigbo@acgnystrom.se> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] better CONFIG_W1_SLAVE_DS2433_CRC handlingEvgeniy Polyakov3-23/+15
CONFIG_W1_SLAVE_DS2433_CRC can be used directly, there's no reason for the indirection of defining a different variable in the Makefile. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham1-0/+1
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04[PATCH] severing module.h->sched.hAl Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-11-16W1: ioremap balanced with iounmapAmol Lad1-0/+2
ioremap must be balanced with iounmap in error path. Please consider for 2.6.19. Signed-off-by: Amol Lad <amol@verismonetworks.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17[PATCH] w1 kconfig fixEvgeniy Polyakov1-1/+0
Remove dependency of w1 subsytem from connector, only w1_con must depend on it. With attached patch applied to vanilla 2.6.19-git things works fine. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: <dmb@pochta.ru> Cc: Greg KH <greg@kroah.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Adrian Bunk <bunk@stusta.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03Fix several typos in drivers/Matt LaPlante1-1/+1
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-07-12[PATCH] w1: remove drivers/w1/w1.hAdrian Bunk1-36/+0
drivers/w1/w1_io.h is both a subset of drivers/w1/w1.h and no longer #include'd by any file. This patch therefore removes w1_io.h. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] w1: fix idle check loop in ds2482Ben Gardner1-1/+1
The idle check loop has a greater-than where it should have a less-than. This causes the ds2482 driver to check for the idle condition exactly once, which causes it to fail on faster machines. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-23[PATCH] connector-exportsAndrew Morton1-0/+1
Put the connector exports at the functions so people can see them in context. Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22[PATCH] w1: warning fixAndrew Morton1-6/+13
drivers/w1/w1.c:423: warning: long long unsigned int format, __u64 arg (arg 8) u64 is not, never has been and never will be "unsigned long long"! While we're there, fix up some code layout - it looks awful in an 80-col display. Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] w1: clean up W1_CON dependency.Evgeniy Polyakov1-1/+1
If w1 is not enabled, w1_con should not appear in configuration, even if no logic is turned on without w1. W1_CON should depend on W1 also. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] drivers/w1/w1.c: fix a compile errorAdrian Bunk1-1/+0
From: Adrian Bunk <bunk@stusta.de> drivers/w1/w1.c:197: error: static declaration of 'w1_bus_type' follows non-static declaration drivers/w1/w1.h:217: error: previous declaration of 'w1_bus_type' was here Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] W1: fix dependencies of W1_SLAVE_DS2433_CRCJean-Luc Leger1-1/+1
From: Jean-Luc Leger <jean-luc.leger@dspnet.fr.eu.org> Default values for boolean and tristate options can only be 'y', 'm' or 'n'. This patch fixes dependencies of W1_SLAVE_DS2433_CRC. Signed-off-by: Jean-Luc Leger <jean-luc.leger@dspnet.fr.eu.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] W1: possible cleanupsEvgeniy Polyakov6-21/+12
This patch contains the following possible cleanups: - the following file did't #include the header with the prototypes for it's global functions: - w1_int.c - #if 0 the following unused global function: - w1_family.c: w1_family_get() - make the following needlessly global functions static: - w1_family.c: __w1_family_put() - w1_io.c: w1_delay() - w1_io.c: w1_touch_bit() - w1_io.c: w1_read_8() - remove the following unused EXPORT_SYMBOL's: - w1_family.c: w1_family_put - w1_family.c: w1_family_registered Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] W1: cleanupsEvgeniy Polyakov3-13/+15
Nice cleanup spotted by Adrian Bunk, which was lost due to moving to the completely new functionality. Shame-shame-shame on me. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] w1 exportsAndrew Morton1-2/+7
From: Andrew Morton <akpm@osdl.org> WARNING: "w1_read_block" [drivers/w1/slaves/w1_therm.ko] undefined! WARNING: "w1_write_8" [drivers/w1/slaves/w1_therm.ko] undefined! WARNING: "w1_reset_select_slave" [drivers/w1/slaves/w1_therm.ko] undefined! WARNING: "w1_reset_bus" [drivers/w1/slaves/w1_ds2433.ko] undefined! WARNING: "w1_write_8" [drivers/w1/slaves/w1_ds2433.ko] undefined! WARNING: "w1_read_block" [drivers/w1/slaves/w1_ds2433.ko] undefined! WARNING: "w1_write_block" [drivers/w1/slaves/w1_ds2433.ko] undefined! WARNING: "w1_reset_select_slave" [drivers/w1/slaves/w1_ds2433.ko] undefined! Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] w1: Use mutexes instead of semaphores.Evgeniy Polyakov8-127/+70
Use mutexes instead of semaphores. Patch tested on x86_64 and i386 with test bus master driver. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] w1: Make w1 connector notifications depend on connector.Evgeniy Polyakov3-8/+14
Make w1 connector notifications depend on connector. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] w1: Move w1-connector definitions into linux/include/connector.hEvgeniy Polyakov1-3/+0
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 21:19:40 +0000