summaryrefslogtreecommitdiffstats
path: root/drivers/w1
AgeCommit message (Collapse)AuthorFilesLines
2018-12-22treewide: surround Kconfig file paths with double quotesMasahiro Yamada1-2/+2
The Kconfig lexer supports special characters such as '.' and '/' in the parameter context. In my understanding, the reason is just to support bare file paths in the source statement. I do not see a good reason to complicate Kconfig for the room of ambiguity. The majority of code already surrounds file paths with double quotes, and it makes sense since file paths are constant string literals. Make it treewide consistent now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-10-15w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for ↵Julien Folly1-14/+52
unsigned, count for max size). IAD Register is yet readable trough the "iad" sys file. A write to the "iad" sys file enables or disables the current measurement, but it was not possible to get the measured value by reading it. Fix: %u in snprintf for unsigned values (vdd and vad) Fix: Avoid possibles overflows (Usage of the 'count' variables) Signed-off-by: Julien Folly <julien.folly@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02w1: omap-hdq: fix missing bus unregister at removalAndreas Kemnade1-0/+2
The bus master was not removed after unloading the module or unbinding the driver. That lead to oopses like this [ 127.842987] Unable to handle kernel paging request at virtual address bf01d04c [ 127.850646] pgd = 70e3cd9a [ 127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000 [ 127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq] [ 127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12 [ 127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 127.890441] PC is at 0xbf01d04c [ 127.893798] LR is at w1_search_process_cb+0x4c/0xfc [ 127.898956] pc : [<bf01d04c>] lr : [<c05f9580>] psr: a0070013 [ 127.905609] sp : cf885f48 ip : bf01d04c fp : ddf1e11c [ 127.911132] r10: cf8fe040 r9 : c05f8d00 r8 : cf8fe040 [ 127.916656] r7 : 000000f0 r6 : cf8fe02c r5 : cf8fe000 r4 : cf8fe01c [ 127.923553] r3 : c05f8d00 r2 : 000000f0 r1 : cf8fe000 r0 : dde1ef10 [ 127.930450] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 127.938018] Control: 10c5387d Table: 8f8f0019 DAC: 00000051 [ 127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f) [ 127.951171] Stack: (0xcf885f48 to 0xcf886000) [ 127.955810] 5f40: cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00 [ 127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000 [ 127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000 [ 127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 [ 127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 128.007781] [<c05f9580>] (w1_search_process_cb) from [<c05f9700>] (w1_process+0x6c/0x118) [ 128.016479] [<c05f9700>] (w1_process) from [<c01499a4>] (kthread+0x130/0x148) [ 128.024047] [<c01499a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8) [ 128.037017] 5fa0: 00000000 00000000 00000000 00000000 [ 128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 128.061340] Code: bad PC value [ 128.064697] ---[ end trace af066e33c0e14119 ]--- Cc: <stable@vger.kernel.org> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-21Merge tag 'for-v4.19' of ↵Linus Torvalds5-247/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Improve support for TI bq20z75 in sbs-battery - Add Qualcomm PM8xxx reboot driver - Add cros-ec USBPD charger driver - Move ds2760 battery driver from w1 to power-supply and add DT support - Misc fixes * tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) power: supply: bq27xxx: Update comments power: supply: max77693_charger: fix unintentional fall-through power: supply: mark expected switch fall-throughs power: supply: lego_ev3_battery: fix Vce offset power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value power: supply: ds2760_battery: add devicetree probing power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion w1: core: match sub-nodes of bus masters in devicetree dt-bindings: w1: document bindings for ds2760 battery monitor dt-bindings: w1: document generic onewire bindings power: supply: adp5061: Fix a couple off by ones dt-bindings: power: reset: qcom: Add resin binding adp5061: New driver for ADP5061 I2C battery charger power: generic-adc-battery: check for duplicate properties copied from iio channels power: generic-adc-battery: fix out-of-bounds write when copying channel properties power: supply: axp288_charger: Fix initial constant_charge_current value power: supply: ab8500: stop using getnstimeofday64() power: gemini-poweroff: Avoid more spurious poweroffs power: vexpress: fix corruption in notifier registration power: remove possible deadlock when unregistering power_supply ...
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds3-10/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-11power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave ↵Daniel Mack4-247/+0
companion This patch removes the w1 slave driver that used to register the w1 family and instanciate a platform device at runtime. The code now lives in the supply driver instead to avoid that level of indirection. The old device name "ds2760-battery.0" is preserved, so userspace applications can access the same virtual device nodes as before. Note that because the w1 core does not currently have a framework for suspend/resume, the driver now registers a PM notifier callback. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-11w1: core: match sub-nodes of bus masters in devicetreeDaniel Mack1-0/+3
Once a new slave device is detected, match it against all sub-nodes of the master bus controller. If a match is found, set the slave device's of_node pointer. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap1-0/+1
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07ds2490.c: Move struct open braces to previous lineHenriette Hofmeier1-4/+2
Move open braces of two structs to the declaration line, as criticized by checkpatch. Signed-off-by: Henriette Hofmeier <passt@h-hofmeier.de> Signed-off-by: Florian Harbecke <florian.harbecke@fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07ds2490.c: Remove unnecessary whitespaceHenriette Hofmeier1-1/+1
Remove unnecessary whitespace criticized by checkpatch. Signed-off-by: Henriette Hofmeier <passt@h-hofmeier.de> Signed-off-by: Florian Harbecke <florian.harbecke@fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07ds2490.c: Add required spacesHenriette Hofmeier1-4/+4
Add missing spaces in for- and while-loops reported missing by checkpatch. Signed-off-by: Henriette Hofmeier <passt@h-hofmeier.de> Signed-off-by: Florian Harbecke <florian.harbecke@fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03w1: ds2482: make module parameter extra_config staticColin Ian King1-1/+1
The variable extra_config is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'extra_config' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26w1: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven1-1/+1
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-05Merge tag 'char-misc-4.18-rc1' of ↵Linus Torvalds2-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the "big" char and misc driver patches for 4.18-rc1. It's not a lot of stuff here, but there are some highlights: - coreboot driver updates - soundwire driver updates - android binder updates - fpga big sync, mostly documentation - lots of minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits) vmw_balloon: fixing double free when batching mode is off MAINTAINERS: Add driver-api/fpga path fpga: clarify that unregister functions also free documentation: fpga: move fpga-region.txt to driver-api documentation: fpga: add bridge document to driver-api documentation: fpga: move fpga-mgr.txt to driver-api Documentation: fpga: move fpga overview to driver-api fpga: region: kernel-doc fixes fpga: bridge: kernel-doc fixes fpga: mgr: kernel-doc fixes fpga: use SPDX fpga: region: change api, add fpga_region_create/free fpga: bridge: change api, don't use drvdata fpga: manager: change api, don't use drvdata fpga: region: don't use drvdata in common fpga code Drivers: hv: vmbus: Removed an unnecessary cast from void * ver_linux: Drop redundant calls to system() to test if file is readable ver_linux: Move stderr redirection from function parameter to function body misc: IBM Virtual Management Channel Driver (VMC) rpmsg: Correct support for MODULE_DEVICE_TABLE() ...
2018-05-141wire: family module autoload fails because of upper/lower case mismatch.Ingo Flaschberger1-1/+1
1wire family module autoload fails because of upper/lower  case mismatch. Signed-off-by: Ingo Flaschberger <ingo.flaschberger@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14w1: mxc_w1: Enable clock before calling clk_get_rate() on itStefan Potyra1-7/+13
According to the API, you may only call clk_get_rate() after actually enabling it. Found by Linux Driver Verification project (linuxtesting.org). Fixes: a5fd9139f74c ("w1: add 1-wire master driver for i.MX27 / i.MX31") Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-10w1: w1_io.c: fix a kernel-doc warningMauro Carvalho Chehab1-0/+1
Add a blank line to avoid this Sphinx warning: ./drivers/w1/w1_io.c:197: WARNING: Definition list ends without a blank line; unexpected unindent. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-14w1: use put_device() if device_register() failArvind Yadav1-0/+1
If device_register() returned an error! Always use put_device() to give up the reference initialized in device_register(). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31Merge tag 'docs-4.16' of git://git.lwn.net/linuxLinus Torvalds1-1/+5
Pull documentation updates from Jonathan Corbet: "Documentation updates for 4.16. New stuff includes refcount_t documentation, errseq documentation, kernel-doc support for nested structure definitions, the removal of lots of crufty kernel-doc support for unused formats, SPDX tag documentation, the beginnings of a manual for subsystem maintainers, and lots of fixes and updates. As usual, some of the changesets reach outside of Documentation/ to effect kerneldoc comment fixes. It also adds the new LICENSES directory, of which Thomas promises I do not need to be the maintainer" * tag 'docs-4.16' of git://git.lwn.net/linux: (65 commits) linux-next: docs-rst: Fix typos in kfigure.py linux-next: DOC: HWPOISON: Fix path to debugfs in hwpoison.txt Documentation: Fix misconversion of #if docs: add index entry for networking/msg_zerocopy Documentation: security/credentials.rst: explain need to sort group_list LICENSES: Add MPL-1.1 license LICENSES: Add the GPL 1.0 license LICENSES: Add Linux syscall note exception LICENSES: Add the MIT license LICENSES: Add the BSD-3-clause "Clear" license LICENSES: Add the BSD 3-clause "New" or "Revised" License LICENSES: Add the BSD 2-clause "Simplified" license LICENSES: Add the LGPL-2.1 license LICENSES: Add the LGPL 2.0 license LICENSES: Add the GPL 2.0 license Documentation: Add license-rules.rst to describe how to properly identify file licenses scripts: kernel_doc: better handle show warnings logic fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at doc: md: Fix a file name to md-fault.c in fault-injection.txt errseq: Add to documentation tree ...
2017-12-21w1_netlink.h: add support for nested structsMauro Carvalho Chehab1-1/+5
Now that kernel-doc can hanle nested structs/unions, describe such fields at w1_netlink_message_types. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-12-08w1: w1-gpio: Convert to use GPIO descriptorsLinus Walleij1-88/+61
The w1 master driver includes a complete open drain emulation reimplementation among other things. This converts the driver and all board files using it to use GPIO descriptors associated with the device to look up the GPIO wire, as well ass the optional pull-up GPIO line. When probed from the device tree, the driver will just pick descriptors and use them right off. For the two board files in the kernel, we add descriptor lookups so we do not need to keep any old platform data handling around for the GPIO lines. As the platform data is also a state container for this driver, we augment it to contain the GPIO descriptors. w1_gpio_write_bit_dir() and w1_gpio_write_bit_val() are gone since this pair was a reimplementation of open drain emulation which is now handled by gpiolib. The special "linux,open-drain" flag is a bit of mishap here: it has the same semantic as the same flags in I2C: it means that something in the platform is setting up the line as open drain behind our back. We handle this the same way as in I2C. To drive the pull-up, we need to bypass open drain emulation in gpiolib for the line, and this is done by driving it high using gpiod_set_raw_value() which has been augmented to have the semantic of overriding the open drain emulation. We also augment the documentation to reflect the way to pass GPIO descriptors from the machine. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-16Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds5-29/+820
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-08w1: keep balance of mutex locks and refcntsAlexey Khoroshilov1-28/+31
w1_therm_eeprom() and w1_DS18B20_precision() decrement THERM_REFCNT on error paths, while they did not increment it yet. read_therm() unlocks bus mutex on some error paths, while it is not acquired. The patch makes sure all the functions keep the balance in usage of the mutex and the THERM_REFCNT. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridgeJan Kandziora3-0/+787
This subpatch adds a driver for the DS28E17 Onewire to I2C master bridge. Signed-off-by: Jan Kandziora <jjj@gmx.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04wire: export w1_touch_bitJan Kandziora1-1/+2
The w1_ds28e17 driver from the next part of this patch needs to emit single-bit read timeslots to the DS28E17. The w1 subsystem already has this function but it is not exported outside drivers/w1/w1_io.c This subpatch exports the w1_touch_bit symbol with EXPORT_SYMBOL_GPL, same as the other exported symbols in drivers/w1/w1_io.c May be also useful later for writing drivers for other Onewire chips which do single-bit communication. Signed-off-by: Jan Kandziora <jjj@gmx.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09Merge tag 'for-v4.14' of ↵Linus Torvalds3-124/+0
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset changes from Sebastian Reichel: "New chip/feature support: - bq27xxx: support updating battery config from DT - bq24190: support loading battery charge info from DT - LTC2941: add LTC2942/LTC2944 support - max17042: add ACPI support - max1721x: new driver Misc: - Move bq27xxx w1 driver from w1 into power-supply subsystem - Introduce power_supply_set_input_current_limit_from_supplier - constify stuff - some minor fixes" * tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits) power: supply: bq27xxx: enable writing capacity values for bq27421 power: supply: bq24190_charger: Get input_current_limit from our supplier power: supply: bq24190_charger: Export 5V boost converter as regulator power: supply: bq24190_charger: Add power_supply_battery_info support power: supply: bq24190_charger: Add property system-minimum-microvolt power: supply: bq24190_charger: Enable devicetree config dt-bindings: power: supply: Add docs for TI BQ24190 battery charger power: supply: bq27xxx: Remove duplicate chip data arrays power: supply: bq27xxx: Enable data memory update for certain chips power: supply: bq27xxx: Add chip IDs for previously shadowed chips power: supply: bq27xxx: Create single chip data table power: supply: bq24190_charger: Add ti,bq24192i to devicetree table power: supply: bq24190_charger: Add input_current_limit property power: supply: Add power_supply_set_input_current_limit_from_supplier helper power: supply: max17042_battery: Fix compiler warning power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies() power: supply: make device_attribute const power: supply: max17042_battery: Fix ACPI interrupt issues power: supply: max17042_battery: Add support for ACPI enumeration power: supply: lp8788: Make several arrays static const * const ...
2017-08-31drivers: w1: add hwmon temp support for w1_thermJaghathiswari Rankappagounder Natarajan1-0/+86
This change adds hwmon temp support for w1_therm. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31drivers: w1: refactor w1_slave_show to make the temp reading functionality ↵Jaghathiswari Rankappagounder Natarajan1-31/+51
separate Inside the w1_slave_show function refactor the code to read the temp into a separate function. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31drivers: w1: add hwmon support structuresJaghathiswari Rankappagounder Natarajan1-1/+17
This patch has changes to w1.h/w1.c generic files to add (optional) hwmon support structures. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28drivers: w1: Add 1w slave driver for DS28E05 EEPROMAndrew Worsley4-0/+324
Add a one wire driver for the DS28E05 one wire slave chip. This chip requires OverDrive support to talk to it. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28drivers: w1: Extend 1W master driver DS2482 with module option to support ↵Andrew Worsley1-4/+8
PPM/SPU/1WS features Extend the one wire DS2482 master driver with a module option that allows support for PPM/SPU/1WS interface modes to be requested. This allows support of chips that require one or more of these features such as the DS28E05. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28w1: ds2438: make several functions staticColin Ian King1-4/+5
The functions w1_ds2438_get_page, w1_ds2438_get_temperature, w1_ds2438_change_config_bit and w1_ds2438_get_voltage are local to the source and do not need to be in global scope, so make it static. Cleans up sparse warnings: symbol 'w1_ds2438_get_page' was not declared. Should it be static? symbol 'w1_ds2438_get_temperature' was not declared. Should it be static? symbol 'w1_ds2438_change_config_bit' was not declared. Should it be static? symbol 'w1_ds2438_get_voltage' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28w1: ds1wm: add messages to make incorporation in mfd-drivers easierJohannes Poehlmann1-1/+14
w1: ds1wm: add messages to make incorporation in mfd-drivers easier Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28w1: ds1wm: silence interrupts on HW before claiming the interruptJohannes Poehlmann1-0/+6
w1: ds1wm: silence interrupts on HW before claiming the interrupt. This way avoid possible invalid interrupts in the initialization phase. Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28w1: ds1wm: add level interrupt modesJohannes Poehlmann1-0/+4
w1: ds1wm: add level interrupt modes Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28w1: ds1wm: make endian clean and use standard io memory accessorsJohannes Poehlmann1-2/+58
o Make endian clean, make HW-endianness configurable. o Use ioread*, iowrite* instead of __raw_readb,__raw_writeb to also use memory-barriers when accessing HW-registers. We do not want reordering to happen here. Both changes are tightly coupled, so I do them in one patch Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28w1: ds1wm: fix register offset (bus shift) calculationJohannes Poehlmann1-4/+19
Replace incorrect register offsett calculation by direct configuration of bus_shift in mfd-cell. Indirect definition of address-shift by resource size was unobvious and was wrong (should have used a binary log). Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28w1: ds2490: constify usb_device_id and fix space before '[' errorArvind Yadav1-1/+1
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Fix checkpatch.pl error: ERROR: space prohibited before open square bracket '['. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28w1: constify attribute_group structures.Arvind Yadav1-1/+1
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-25power: supply: move HDQ interface for bq27xxx from w1 to power/supplyAndrew F. Davis3-124/+0
The HDQ interface driver should be in this folder just like the I2C interface driver. Move this driver out of drivers/w1/slave and into drivers/power/supply. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-07-17w1: omap-hdq: fix error return code in omap_hdq_probe()Gustavo A. R. Silva1-1/+2
platform_get_irq() returns an error code, but the omap_hdq driver ignores it and always returns -ENXIO. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error. Print error message and propagate the return value of platform_get_irq on failure. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17w1: Fix slave count on 1-Wire bus (resend)Alex A. Mihaylov1-2/+2
1-Wire bus have very fast algorith for exchange with single slave device. Fix incorrect count of slave devices on connect second slave device. This case on slave device probe() step we need use generic (multislave) functions for read/write device. Signed-off-by: Alex A. Mihaylov <minimumlaw@rambler.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09w1: Add subsystem kernel public interfaceAndrew F. Davis32-528/+155
Like other subsystems we should be able to define slave devices outside of the w1 directory. To do this we move public facing interface definitions to include/linux/w1.h and rename the internal definition file to w1_internal.h. As w1_family.h and w1_int.h contained almost entirely public driver interface definitions we simply removed these files and moved the remaining definitions into w1_internal.h. With this we can now start to move slave devices out of w1/slaves and into the subsystem based on the function they implement, again like other drivers. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25w1: Organize driver source to natural/common orderAndrew F. Davis20-170/+138
Structures and functions should be ordered such that forward declaration use is minimized. MODULE_* macros should immediately follow the structures and functions upon which they act. Remaining MODULE_* macros should be at the end of the file in alphabetical order. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08w1: Remove unneeded use of assert() and remove w1_log.hAndrew F. Davis6-41/+0
The only use of assert() is in matrox_w1.c and is used to check the input to probe() from the PCI subsystem for NULL values, these are guaranteed to be populated and no other PCI driver makes this check, remove this. As this was the only definition in w1_log.h, remove this also. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08w1: Use kernel common min() implementationAndrew F. Davis1-3/+1
Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17w1: w1_ds2760.h: fix defines indentationMariusz Bialonczyk1-4/+6
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17w1: add support for DS2438 Smart Battery MonitorMariusz Bialonczyk4-0/+398
Detailed information about support and provided sysfs files in my next commit which creates a documentation file: Documentation/w1/slaves/w1_ds2438 Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-1/+2
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>