Age | Commit message (Collapse) | Author | Files | Lines |
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add kernel-doc comments to the VME driver API and structures. This
documentation will be integrated into the RST documentation in a later
patch.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 050c3d52cc7810d9d17b8cd231708609af6876ae ("vme: make core
vme support explicitly non-modular") dropped the remove function
because it appeared as if it was for removal of the bus, which is
not supported.
However, vme_bus_remove() is called when a VME device is removed
from the bus and not when the bus is removed; as it calls the VME
device driver's cleanup function. Without this function, the
remove() in the VME device driver is never called and VME device
drivers cannot be reloaded again.
Here we restore the remove function that was deleted in that
commit, and the reference to the function in the bus structure.
Fixes: 050c3d52cc78 ("vme: make core vme support explicitly non-modular")
Cc: Manohar Vanga <manohar.vanga@gmail.com>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: stable <stable@vger.kernel.org> # 4.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In ca91cx42_slave_get function, the value pointed by vme_base pointer is
set through:
*vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]);
So it must be dereferenced to be used in calculation of pci_base:
*pci_base = (dma_addr_t)*vme_base + pci_offset;
This bug was caught thanks to the following gcc warning:
drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’:
drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
*pci_base = (dma_addr_t)vme_base + pci_offset;
Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com>
Acked-By: Martyn Welch <martyn@welchs.me.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function vme_get_size returns the size of the window to the caller,
however it doesn't check the return value of the call to vme_master_get.
Return 0 on failure rather than anything else.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
image->lock is unlocked in some error handling path without take the
lock, so remove those unexpected unlock.
Fixes: 658bcdae9c67 ("vme: Adding Fake VME driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We get 4 warnings when building kernel with W=1:
drivers/vme/bridges/vme_fake.c:384:6: warning: no previous prototype for 'fake_lm_check' [-Wmissing-prototypes]
drivers/vme/bridges/vme_fake.c:619:6: warning: no previous prototype for 'fake_vmewrite8' [-Wmissing-prototypes]
drivers/vme/bridges/vme_fake.c:649:6: warning: no previous prototype for 'fake_vmewrite16' [-Wmissing-prototypes]
drivers/vme/bridges/vme_fake.c:679:6: warning: no previous prototype for 'fake_vmewrite32' [-Wmissing-prototypes]
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
casting between dma_addr_t and a pointer is generally tricky,
as they might not be the same size and almost never point into
the same address space. With 32-bit ARM systems and LPAE, we
get this warning for the vme_fake driver that stores a pointer
in a dma_addr_t variable:
drivers/vme/bridges/vme_fake.c: In function 'fake_slave_set':
drivers/vme/bridges/vme_fake.c:204:29: error: assignment makes pointer from integer without a cast [-Werror=int-conversion]
To make this clearer while fixing the warning, I'm adding
a set of helper functions for the type conversion.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces a fake VME bridge driver. This driver currently
emulates a subset of the VME bridge functionality. This allows some VME
subsystem development and even some VME device driver development to be
carried out in the absence of a proper VME bus.
Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Kconfig currently controlling compilation of this code is:
drivers/vme/Kconfig:menuconfig VME_BUS
drivers/vme/Kconfig: bool "VME bridge support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We replace module.h and moduleparam.h (unused) with init.h and also
export.h ; the latter since this file does export some syms.
Since this is a struct bus_type and not a platform_driver, we don't
have any ".suppress_bind_attrs" to be concerned about when we
drop the ".remove" code from this file.
Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.
Cc: Manohar Vanga <manohar.vanga@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These drivers have a PCI device ID table but the PCI module
alias information is not created so module autoloading won't work.
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make the location monitor callback function prototype more useful by
changing the argument from an integer to a void pointer.
All VME bridge drivers were simply passing the location monitor index
(e.g. 0-3) as the argument to these callbacks. It is much more useful
to pass back a pointer to data that the callback-registering driver
cares about.
There appear to be no in-kernel callers of vme_lm_attach (or
vme_lme_request for that matter), so this change only affects the VME
subsystem and bridge drivers.
This has been tested with Tsi148 hardware, but the CA91Cx42 changes
have only been compiled.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Consolidate vme_bridge structure setup that every bridge was required
to do itself. This came about because .irq_mtx is only used within the
VME core, but was required to be setup externally.
This returns the structure passed in to support shorthand like this:
bridge = vme_init_bridge(&priv->bridge);
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a typo in the spurious interrupt warning and consistently capitalize
VME, PCI, and DMA acronyms.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use to_pci_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.4-rc1. Lots of
different driver and subsystem updates, hwtracing being the largest
with the addition of some new platforms that are now supported. Full
details in the shortlog.
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits)
fpga: socfpga: Fix check of return value of devm_request_irq
lkdtm: fix ACCESS_USERSPACE test
mcb: Destroy IDA on module unload
mcb: Do not return zero on error path in mcb_pci_probe()
mei: bus: set the device name before running fixup
mei: bus: use correct lock ordering
mei: Fix debugfs filename in error output
char: ipmi: ipmi_ssif: Replace timeval with timespec64
fpga: zynq-fpga: Fix issue with drvdata being overwritten.
fpga manager: remove unnecessary null pointer checks
fpga manager: ensure lifetime with of_fpga_mgr_get
fpga: zynq-fpga: Change fw format to handle bin instead of bit.
fpga: zynq-fpga: Fix unbalanced clock handling
misc: sram: partition base address belongs to __iomem space
coresight: etm3x: adding documentation for sysFS's cpu interface
vme: 8-bit status/id takes 256 values, not 255
fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000
ARM: zynq: dt: Updated devicetree for Zynq 7000 platform.
ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager.
ver_linux: proc/modules, limit text processing to 'sed'
...
|
|
Fixes an off by one array size.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The warning is a false positive.
drivers/vme/bridges/vme_tsi148.c: In function 'tsi148_master_write':
drivers/vme/bridges/vme_tsi148.c:1358:31: warning: 'handler' may be used uninitialized in this function [-Wmaybe-uninitialized]
vme_unregister_error_handler(handler);
^
drivers/vme/bridges/vme_tsi148.c: In function 'tsi148_master_read':
drivers/vme/bridges/vme_tsi148.c:1260:31: warning: 'handler' may be used uninitialized in this function [-Wmaybe-uninitialized]
vme_unregister_error_handler(handler);
^
Fixes: 0b0496625715 ("vme: change bus error handling scheme")
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This will enable error messages for accesses done through mmap.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current VME bus error handler adds errors to the bridge error list.
vme_master_{read,write} then traverses that list to look for relevant
errors.
Such scheme didn't work well for accesses going through vme_master_mmap
because they would also allocate a vme_bus_error, but have no way to do
vme_clear_errors call to free that memory.
This changes the error handling process to be other way around: now
vme_master_{read,write} defines a window in VME address space that will
catch possible errors. VME bus error interrupt only traverses these
windows and marks those that had errors in them.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Also changes vme_bus_error_handler to take generic address modifier code
instead of raw contents of a device-specific attribute register.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Error handling code found in tsi148 is not device specific. In fact it
already relies on shared vme_bus_error struct and vme_bridge.vme_errors
field. The other bridge driver could reuse this code if it is shared.
This introduces a slight behavior change: vme error message won't be
triggered in a rare case when err_chk=1 and kmalloc fails.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Universe II allows PCI address grannularity of 4K or 64K depending on
the window id. tsi148 only supports 64K. Existing driver implementations
are validating window size against this grannularity and then use that
very size as alignment parameter to pci_bus_alloc_resource. This
constraint is excessive, alignment by granularity should be enough.
This changes alignment constraint from size to a fixed constraint of
64K.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Universe II datasheet defines following address space values
for LM_CTL[16:18]
000=A16
001=A24
010=A32
011,100,101=Reserved
110=User1
111=User2
Mask 5<<16 is not the right one for matching [16:18], instead we should
use 7<<16.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This moves DMA mapping of the first list element to vme_list_add, the
same place where other elements mappings occur. This prevents extra
mapping or over-unmapping in the cases when vme_list_exec is called more
or less than one time respectively.
Also adds dma_mapping_error check.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DMA lists on tsi148 weren't processed further than the first item
because of the broken logic. This regression was introduced in:
ac1a4f2caf7b071 "Staging: VME: Ensure TSI148 link list descriptors..."
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The tsi148 driver is registering the slave images as supporting the "USER"
access modes and CR/CSR access mode rather than the master images as it
should.
Remove the incorrect case entries for these modes from the
tsi148_slave_set() function, stop registering slave_images as supporting
these modes and instead register master windows as supporting these modes.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We also make sure that user won't be able to reconfigure the window while it is
mmap'ed.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace a misspelled function name by %s and then __func__.
This is the get function, not the set function, as was indicated by the
string.
This was done using Coccinelle, including the use of Levenshtein distance,
as proposed by Rasmus Villemoes.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the now unnecessary memset too.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Manohar Vanga <manohar.vanga@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The CA91CX42_DCTL_VDW_M define is cut and pasted twice so we can delete
the second instance.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Save some characters by using to_pci_dev() instead of container_of().
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Previously, tsi148_master_set() assumed the address contained in its
PCI bus resource represented the actual PCI bus address. This is a fine
assumption on some platforms. However, on platforms that don't use a
1:1 (CPU:PCI) mapping this results in the tsi148 driver configuring an
invalid master window translation.
This patch updates the vme_tsi148 driver to first convert the address
contained in the PCI bus resource into a PCI bus address before using
it.
[asierra: account for pcibios_resource_to_bus() prototype change]
Signed-off-by: Joe Schultz <jschultz@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch corrects a typo where "vme_base" was used instead of
"*vme_base". The typo resulted in an incorrect value being returned
to userspace (via vme_user).
It also removes the following compile warning on some platforms:
warning: cast from pointer to integer of different size
[asierra: commit title/log rewording]
Signed-off-by: Joe Schultz <jschultz@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the fixes here for future mei and other patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ca91cx42 and tsi148 VME bridges use the width of reads and writes on the
PCI bus in part to control the width of the cycles on the VME bus. It is
important that we can control the width of cycles on the VME bus as some VME
hardware requires cycles of a specific width. The memcpy_toio() and
memcpy_fromio() functions do not provide sufficient control, so instead loop
using ioread functions.
Reported-by: Michael Kenney <mfkenney@gmail.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In order to ensure the correct width cycles on the VME bus, the VME bridge
drivers implement an algorithm to utilise the largest possible width reads and
writes whilst maintaining natural alignment constraints. The algorithm
currently looks at the start address rather than the current read/write address
when determining whether a 16-bit width cycle is required to get to 32-bit
alignment. This results in incorrect alignment,
Reported-by: Jim Strouth <james.strouth@ge.com>
Tested-by: Jim Strouth <james.strouth@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Previously, VME bridge support was treated as any other driver (using
module_init() macro), but if VME bridge and vme_user (staging) drivers
were compiled into the kernel, then vme_user would attempt to register
itself before the VME core support had been loaded. This would result
in a kernel panic.
The load order of these built-in drivers is based on the order in which
drivers/staging/vme and driver/vme are compiled.
This patch changes the VME core driver to use the subsys_initcall()
macro which ensures that it is loaded before all other VME drivers
regardless of the order in which they are compiled.
Tested-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Traditionally the "get" functions increment the reference count of the
object that is returned, which does not happen with vme_slot_get. The
function vme_slot_get returns the physical VME slot associated with a
particular struct vme_dev. Rename vme_slot_num to avoid any confusion.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The match function for vme_user is completely wrong. It will blindly bind
against the first VME slot on each bus (at this point that would be just the
first bus as the driver can only handle one bus).
The original intention (before some major subsystem changes) was that the
driver bind against the slot to which the bridge was attached in the VME
system and to the bus(es) provided via the "bus" module parameter.
To do this cleanly (i.e. without poking arround in the subsystems internal
stuctures) a functionality has been added to provide access to the bus
enumeration.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added missing __iomem annotation in order to fix the following
sparse warnings:
drivers/vme/boards/vme_vmivme7805.c:62:19: warning: incorrect type in assignment (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:62:19: expected void *static [toplevel] vmic_base
drivers/vme/boards/vme_vmivme7805.c:62:19: got void [noderef] <asn:2>*
drivers/vme/boards/vme_vmivme7805.c:70:9: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:70:9: expected void volatile [noderef] <asn:2>*addr
drivers/vme/boards/vme_vmivme7805.c:70:9: got void *
drivers/vme/boards/vme_vmivme7805.c:73:16: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:73:16: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/boards/vme_vmivme7805.c:73:16: got void *
drivers/vme/boards/vme_vmivme7805.c:75:9: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:75:9: expected void volatile [noderef] <asn:2>*addr
drivers/vme/boards/vme_vmivme7805.c:75:9: got void *
drivers/vme/boards/vme_vmivme7805.c:78:16: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:78:16: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/boards/vme_vmivme7805.c:78:16: got void *
drivers/vme/boards/vme_vmivme7805.c:85:9: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:85:9: expected void volatile [noderef] <asn:2>*addr
drivers/vme/boards/vme_vmivme7805.c:85:9: got void *
drivers/vme/boards/vme_vmivme7805.c:99:17: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/boards/vme_vmivme7805.c:99:17: expected void volatile [noderef] <asn:2>*addr
drivers/vme/boards/vme_vmivme7805.c:99:17: got void *static [toplevel] vmic_base
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added missing __iomem annotation in order to fix the following
sparse warnings:
drivers/vme/bridges/vme_ca91cx42.c:859:39: warning: incorrect type in initializer (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:859:39: expected void *addr
drivers/vme/bridges/vme_ca91cx42.c:859:39: got void [noderef] <asn:2>*
drivers/vme/bridges/vme_ca91cx42.c:878:30: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:878:30: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:878:30: got void *addr
drivers/vme/bridges/vme_ca91cx42.c:885:47: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:885:47: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:885:47: got void *
drivers/vme/bridges/vme_ca91cx42.c:889:48: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:889:48: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:889:48: got void *
drivers/vme/bridges/vme_ca91cx42.c:896:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:896:17: expected void const volatile [noderef] <asn:2>*<noident>
drivers/vme/bridges/vme_ca91cx42.c:896:17: got void *
drivers/vme/bridges/vme_ca91cx42.c:901:40: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:901:40: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:901:40: got void *
drivers/vme/bridges/vme_ca91cx42.c:905:39: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:905:39: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:905:39: got void *
drivers/vme/bridges/vme_ca91cx42.c:919:39: warning: incorrect type in initializer (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:919:39: expected void *addr
drivers/vme/bridges/vme_ca91cx42.c:919:39: got void [noderef] <asn:2>*
drivers/vme/bridges/vme_ca91cx42.c:932:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:932:17: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:932:17: got void *addr
drivers/vme/bridges/vme_ca91cx42.c:939:25: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:939:25: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:939:25: got void *
drivers/vme/bridges/vme_ca91cx42.c:943:25: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:943:25: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:943:25: got void *
drivers/vme/bridges/vme_ca91cx42.c:950:17: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:950:17: expected void volatile [noderef] <asn:2>*<noident>
drivers/vme/bridges/vme_ca91cx42.c:950:17: got void *
drivers/vme/bridges/vme_ca91cx42.c:955:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:955:17: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:955:17: got void *
drivers/vme/bridges/vme_ca91cx42.c:959:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_ca91cx42.c:959:17: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_ca91cx42.c:959:17: got void *
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added missing __iomem annotation in order to fix the following
sparse warnings:
drivers/vme/bridges/vme_tsi148.c:1270:39: warning: incorrect type in initializer (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1270:39: expected void *addr
drivers/vme/bridges/vme_tsi148.c:1270:39: got void [noderef] <asn:2>*
drivers/vme/bridges/vme_tsi148.c:1287:30: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1287:30: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1287:30: got void *addr
drivers/vme/bridges/vme_tsi148.c:1294:47: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1294:47: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1294:47: got void *
drivers/vme/bridges/vme_tsi148.c:1298:48: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1298:48: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1298:48: got void *
drivers/vme/bridges/vme_tsi148.c:1305:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1305:17: expected void const volatile [noderef] <asn:2>*<noident>
drivers/vme/bridges/vme_tsi148.c:1305:17: got void *
drivers/vme/bridges/vme_tsi148.c:1310:40: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1310:40: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1310:40: got void *
drivers/vme/bridges/vme_tsi148.c:1314:39: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1314:39: expected void const volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1314:39: got void *
drivers/vme/bridges/vme_tsi148.c:1351:39: warning: incorrect type in initializer (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1351:39: expected void *addr
drivers/vme/bridges/vme_tsi148.c:1351:39: got void [noderef] <asn:2>*
drivers/vme/bridges/vme_tsi148.c:1369:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1369:17: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1369:17: got void *addr
drivers/vme/bridges/vme_tsi148.c:1376:25: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1376:25: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1376:25: got void *
drivers/vme/bridges/vme_tsi148.c:1380:25: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1380:25: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1380:25: got void *
drivers/vme/bridges/vme_tsi148.c:1387:17: warning: incorrect type in argument 1 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1387:17: expected void volatile [noderef] <asn:2>*<noident>
drivers/vme/bridges/vme_tsi148.c:1387:17: got void *
drivers/vme/bridges/vme_tsi148.c:1392:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1392:17: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1392:17: got void *
drivers/vme/bridges/vme_tsi148.c:1396:17: warning: incorrect type in argument 2 (different address spaces)
drivers/vme/bridges/vme_tsi148.c:1396:17: expected void volatile [noderef] <asn:2>*addr
drivers/vme/bridges/vme_tsi148.c:1396:17: got void *
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|