summaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2021-12-05Merge tag 'tty-5.16-rc4' of ↵Linus Torvalds1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes for 5.16-rc4 to resolve a number of reported problems. They include: - liteuart serial driver fixes - 8250_pci serial driver fixes for pericom devices - 8250 RTS line control fix while in RS-485 mode - tegra serial driver fix - msm_serial driver fix - pl011 serial driver new id - fsl_lpuart revert of broken change - 8250_bcm7271 serial driver fix - MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1 - vgacon fix for reported problem All of these, except for the 8250_bcm7271 fix have been in linux-next with no reported problem. The 8250_bcm7271 fix was added to the tree on Friday so no chance to be linux-next yet. But it should be fine as the affected developers submitted it" * tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_bcm7271: UART errors after resuming from S2 serial: 8250_pci: rewrite pericom_do_set_divisor() serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array serial: 8250: Fix RTS modem control while in rs485 mode Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP" serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30 serial: liteuart: relax compile-test dependencies serial: liteuart: fix minor-number leak on probe errors serial: liteuart: fix use-after-free and memleak on unbind serial: liteuart: Fix NULL pointer dereference in ->remove() vgacon: Propagate console boot parameters before calling `vc_resize' tty: serial: msm_serial: Deactivate RX DMA for polling support serial: pl011: Add ACPI SBSA UART match id serial: core: fix transmit-buffer reset and memleak MAINTAINERS: Add rpmsg tty driver maintainer
2021-11-26Merge tag 'for-linus-5.16c-rc3-tag' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - Kconfig fix to make it possible to control building of the privcmd driver - three fixes for issues identified by the kernel test robot - a five-patch series to simplify timeout handling for Xen PV driver initialization - two patches to fix error paths in xenstore/xenbus driver initialization * tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: make HYPERVISOR_set_debugreg() always_inline xen: make HYPERVISOR_get_debugreg() always_inline xen: detect uninitialized xenbus in xenbus_init xen: flag xen_snd_front to be not essential for system boot xen: flag pvcalls-front to be not essential for system boot xen: flag hvc_xen to be not essential for system boot xen: flag xen_drm_front to be not essential for system boot xen: add "not_essential" flag to struct xenbus_driver xen/pvh: add missing prototype to header xen: don't continue xenstore initialization in case of errors xen/privcmd: make option visible in Kconfig
2021-11-25vgacon: Propagate console boot parameters before calling `vc_resize'Maciej W. Rozycki1-5/+9
Fix a division by zero in `vgacon_resize' with a backtrace like: vgacon_resize vc_do_resize vgacon_init do_bind_con_driver do_unbind_con_driver fbcon_fb_unbind do_unregister_framebuffer do_register_framebuffer register_framebuffer __drm_fb_helper_initial_config_and_unlock drm_helper_hpd_irq_event dw_hdmi_irq irq_thread kthread caused by `c->vc_cell_height' not having been initialized. This has only started to trigger with commit 860dafa90259 ("vt: Fix character height handling with VT_RESIZEX"), however the ultimate offender is commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console"). Said commit has added a call to `vc_resize' whenever `vgacon_init' is called with the `init' argument set to 0, which did not happen before. And the call is made before a key vgacon boot parameter retrieved in `vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to use to the console structure being worked on. Previously the parameter was `c->vc_font.height' and now it is `c->vc_cell_height'. In this particular scenario the registration of fbcon has failed and vt resorts to vgacon. Now fbcon does have initialized `c->vc_font.height' somehow, unlike `c->vc_cell_height', which is why this code did not crash before, but either way the boot parameters should have been copied to the console structure ahead of the call to `vc_resize' rather than afterwards, so that first the call has a chance to use them and second they do not change the console structure to something possibly different from what was used by `vc_resize'. Move the propagation of the vgacon boot parameters ahead of the call to `vc_resize' then. Adjust the comment accordingly. Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console") Cc: stable@vger.kernel.org # v2.6.18+ Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-23xen: add "not_essential" flag to struct xenbus_driverJuergen Gross1-0/+1
When booting the xenbus driver will wait for PV devices to have connected to their backends before continuing. The timeout is different between essential and non-essential devices. Non-essential devices are identified by their nodenames directly in the xenbus driver, which requires to update this list in case a new device type being non-essential is added (this was missed for several types in the past). In order to avoid this problem, add a "not_essential" flag to struct xenbus_driver which can be set to "true" by the respective frontend. Set this flag for the frontends currently regarded to be not essential (vkbs and vfb) and use it for testing in the xenbus driver. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211022064800.14978-2-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-11-19Merge tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-0/+22
Pull drm fixes from Dave Airlie: "This week's fixes, pretty quiet, about right for rc2. amdgpu is the bulk of them but the scheduler ones have been reported in a few places I think. Otherwise just some minor i915 fixes and a few other scattered around: scheduler: - two refcounting fixes cma-helper: - use correct free path for noncoherent efifb: - probing fix amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix i915: - return error handling fix - ADL-P display fix - TGL DSI display clocks fix nouveau: - infoframe corruption fix sun4i: - Kconfig fix" * tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm: drm/amd/amdgpu: fix potential memleak drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors drm/amd/display: Fix OLED brightness control on eDP drm/amd/pm: Remove artificial freq level on Navi1x drm/amd/pm: avoid duplicate powergate/ungate setting drm/amdgpu: add error print when failing to add IP block(v2) drm/amd/pm: Enhanced reporting also for a stuck command drm/i915/guc: fix NULL vs IS_ERR() checking drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping" fbdev: Prevent probing generic drivers if a FB is already registered drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder drm/scheduler: fix drm_sched_job_add_implicit_dependencies drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY drm/cma-helper: Release non-coherent memory with dma_free_noncoherent() drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
2021-11-17parisc/sticon: fix reverse colorsSven Schnelle1-6/+6
sticon_build_attr() checked the reverse argument and flipped background and foreground color, but returned the non-reverse value afterwards. Fix this and also add two local variables for foreground and background color to make the code easier to read. Signed-off-by: Sven Schnelle <svens@stackframe.org> Cc: <stable@vger.kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-17fbdev: Prevent probing generic drivers if a FB is already registeredJavier Martinez Canillas2-0/+22
The efifb and simplefb drivers just render to a pre-allocated frame buffer and rely on the display hardware being initialized before the kernel boots. But if another driver already probed correctly and registered a fbdev, the generic drivers shouldn't be probed since an actual driver for the display hardware is already present. This is more likely to occur after commit d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support") since the "efi-framebuffer" and "simple-framebuffer" platform devices are registered at a later time. Link: https://lore.kernel.org/r/20211110200253.rfudkt3edbd3nsyj@lahvuun/ Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support") Reported-by: Ilya Trukhanov <lahvuun@gmail.com> Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Ilya Trukhanov <lahvuun@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211111115757.1351045-1-javierm@redhat.com
2021-11-12Merge tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drmLinus Torvalds10-673/+46
Pull more drm updates from Dave Airlie: "I missed a drm-misc-next pull for the main pull last week. It wasn't that major and isn't the bulk of this at all. This has a bunch of fixes all over, a lot for amdgpu and i915. bridge: - HPD improvments for lt9611uxc - eDP aux-bus support for ps8640 - LVDS data-mapping selection support ttm: - remove huge page functionality (needs reworking) - fix a race condition during BO eviction panels: - add some new panels fbdev: - fix double-free - remove unused scrolling acceleration - CONFIG_FB dep improvements locking: - improve contended locking logging - naming collision fix dma-buf: - add dma_resv_for_each_fence iterator - fix fence refcounting bug - name locking fixesA prime: - fix object references during mmap nouveau: - various code style changes - refcount fix - device removal fixes - protect client list with a mutex - fix CE0 address calculation i915: - DP rates related fixes - Revert disabling dual eDP that was causing state readout problems - put the cdclk vtables in const data - Fix DVO port type for older platforms - Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown - CCS FBs related fixes - Fix recursive lock in GuC submission - Revert guc_id from i915_request tracepoint - Build fix around dmabuf amdgpu: - GPU reset fix - Aldebaran fix - Yellow Carp fixes - DCN2.1 DMCUB fix - IOMMU regression fix for Picasso - DSC display fixes - BPC display calculation fixes - Other misc display fixes - Don't allow partial copy from user for DC debugfs - SRIOV fixes - GFX9 CSB pin count fix - Various IP version check fixes - DP 2.0 fixes - Limit DCN1 MPO fix to DCN1 amdkfd: - SVM fixes - Fix gfx version for renoir - Reset fixes udl: - timeout fix imx: - circular locking fix virtio: - NULL ptr deref fix" * tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits) drm/ttm: Double check mem_type of BO while eviction drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64) drm/amdgpu: drop jpeg IP initialization in SRIOV case drm/amd/display: reject both non-zero src_x and src_y only for DCN1x drm/amd/display: Add callbacks for DMUB HPD IRQ notifications drm/amd/display: Don't lock connection_mutex for DMUB HPD drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends drm/amdkfd: Fix retry fault drain race conditions drm/amdkfd: lower the VAs base offset to 8KB drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov drm/amdgpu: fix uvd crash on Polaris12 during driver unloading drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages drm/i915/fb: Fix rounding error in subsampled plane size calculation drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown() drm/locking: fix __stack_depot_* name conflict drm/virtio: Fix NULL dereference error in virtio_gpu_poll drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support() drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs drm/amd/amdkfd: Don't sent command to HWS on kfd reset ...
2021-11-08Merge tag 'backlight-next-5.16' of ↵Linus Torvalds4-15/+22
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Fix-ups: - Standardise *_exit() and *_remove() return values in ili9320 and vgg2432a4 Bug Fixes: - Do not override maximum brightness - Propagate errors from get_brightness()" * tag 'backlight-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: video: backlight: ili9320: Make ili9320_remove() return void backlight: Propagate errors from get_brightness() video: backlight: Drop maximum brightness override for brightness zero
2021-11-05Merge tag 'powerpc-5.16-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Enable STRICT_KERNEL_RWX for Freescale 85xx platforms. - Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it to be disabled. - Add support for out-of-line static calls on 32-bit. - Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled. - Fix boot hangs on e5500 due to stale value in ESR passed to do_page_fault(). - Fix several bugs on pseries in handling of device tree cache information for hotplugged CPUs, and/or during partition migration. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin, Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A. R. Silva, Hari Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Niklas Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant Hegde, Wan Jiabing, and Xiaoming Ni, * tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits) powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST powerpc/32e: Ignore ESR in instruction storage interrupt handler powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC MAINTAINERS: Update powerpc KVM entry powerpc/xmon: fix task state output powerpc/44x/fsp2: add missing of_node_put powerpc/dcr: Use cmplwi instead of 3-argument cmpli KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling powerpc/security: Use a mutex for interrupt exit code patching powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs powerpc/book3e: Fix set_memory_x() and set_memory_nx() powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect() powerpc/bpf: Fix write protecting JIT code selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh powerpc/64s/interrupt: Fix check_return_regs_valid() false positive powerpc/boot: Set LC_ALL=C in wrapper script powerpc/64s: Default to 64K pages for 64 bit book3s Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC" ...
2021-11-05Merge tag 'drm-misc-next-2021-10-14' of ↵Dave Airlie10-673/+46
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.16: UAPI Changes: Cross-subsystem Changes: Core Changes: - fbdev: Fix double-free, Remove unused scrolling acceleration - locking: improve logging for contented locks without backoff - dma-buf: Add dma_resv_for_each_fence iterator, and conversion of users Driver Changes: - nouveau: Various code style improvements - bridge: HPD improvements for lt9611uxc, eDP aux-bus support for ps8640, lvds-codec data-mapping selection support - panels: Vivax TPC-9150, Innolux G070Y2-T02, LOGIC Technologies LTTD800480070-L2RT, Sharp LS060T1SX01, Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211014120452.2wicnt6hobu3kbwb@gilmour
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie2-3/+4
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-20video: backlight: ili9320: Make ili9320_remove() return voidUwe Kleine-König3-4/+5
Up to now ili9320_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211019120927.3822792-1-u.kleine-koenig@pengutronix.de
2021-10-13fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)Claudio Suarez9-672/+42
Scroll acceleration is disabled in fbcon by hard-wiring p->scrollmode = SCROLL_REDRAW. Remove the obsolete code in fbcon.c and fbdev/core/ Signed-off-by: Claudio Suarez <cssk@net-c.es> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YVXTYqszZix9TxjJ@gineta.localdomain
2021-10-11Merge tag 'drm-intel-next-2021-10-04' of ↵Dave Airlie1-7/+14
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: - fbdev/efifb: Release PCI device's runtime PM ref during FB destr\ oy (Imre) i915 Core Driver Changes: - Only access SFC_DONE in media when not fused off for graphics 12 and newer. - Double Memory latency values from pcode for DG2 (Matt Roper) - ADL-S PCI ID update (Tejas) - New DG1 PCI ID (Jose) - Fix regression with uncore refactoring (Dave) i915 Display Changes: - ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita) - DG2 display fixes (Ankit, Jani) - Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman) - General display simplifications and clean-ups (Jani, Swati, Jose, Ville) - PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong) - Nuke ORIGIN_GTT (Jose) - Return proper DPRX link training result (Lee) - FBC related refactor and fixes (Ville) - Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng) - DP 2.0 preparation work (Jani) - Silence __iomem sparse warn (Ville) - Clean up DPLL stuff (Ville) - Fix various dp/edp max rates (Matt Atwood, Animesh, Jani) - Remove VBT ddi_port_info caching (Jani) - DSI driver improvements (Lee) - HDCP fixes (Juston) - Associate ACPI connector nodes with connector entries (Heikki) - Add support for out-of-bound hotplug events (Hans) - VESA vendor block and drm/i915 MSO use of it (Jani) - Fixes for bigjoiner (Ville) - Update memory bandwidth parameters (RK) - DMC related fixes (Chris, Jose) - HDR related fixes and improvements (Tejas) - g4x/vlv/chv CxSR/wm fixes/cleanups (Ville) - Use BIOS provided value for RKL Audio's HDA link (Kai-Heng) - Fix the dsc check while selecting min_cdclk (Vandita) - Split and constify vtable (Dave) - Add ww context to intel_dpt_pin (Maarten) - Fix bdb version check (Lukasz) - DP per-lane drive settings prep work and other DP fixes (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Tue 05 Oct 2021 04:58:16 AEST # gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown] # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YVtPk6llsxBFiw7W@intel.com
2021-10-10fbdev: fbmem: Fix double free of 'fb_info->pixmap.addr'Zheyu Ma1-1/+4
savagefb and some other drivers call kfree to free 'info->pixmap.addr' even after calling unregister_framebuffer, which may cause double free. Fix this by setting 'fb_info->pixmap.addr' to NULL after kfree in unregister_framebuffer. The following log reveals it: [ 37.318872] BUG: KASAN: double-free or invalid-free in kfree+0x13e/0x290 [ 37.319369] [ 37.320803] Call Trace: [ 37.320992] dump_stack_lvl+0xa8/0xd1 [ 37.321274] print_address_description+0x87/0x3b0 [ 37.321632] ? kfree+0x13e/0x290 [ 37.321879] ? kfree+0x13e/0x290 [ 37.322126] ? kfree+0x13e/0x290 [ 37.322374] kasan_report_invalid_free+0x58/0x90 [ 37.322724] ____kasan_slab_free+0x123/0x140 [ 37.323049] __kasan_slab_free+0x11/0x20 [ 37.323347] slab_free_freelist_hook+0x81/0x150 [ 37.323689] ? savagefb_remove+0xa1/0xc0 [savagefb] [ 37.324066] kfree+0x13e/0x290 [ 37.324304] savagefb_remove+0xa1/0xc0 [savagefb] [ 37.324655] pci_device_remove+0xa9/0x250 [ 37.324959] ? pci_device_probe+0x7d0/0x7d0 [ 37.325273] device_release_driver_internal+0x4f7/0x7a0 [ 37.325666] driver_detach+0x1e8/0x2c0 [ 37.325952] bus_remove_driver+0x134/0x290 [ 37.326262] ? sysfs_remove_groups+0x97/0xb0 [ 37.326584] driver_unregister+0x77/0xa0 [ 37.326883] pci_unregister_driver+0x2c/0x1c0 [ 37.336124] [ 37.336245] Allocated by task 5465: [ 37.336507] ____kasan_kmalloc+0xb5/0xe0 [ 37.336801] __kasan_kmalloc+0x9/0x10 [ 37.337069] kmem_cache_alloc_trace+0x12b/0x220 [ 37.337405] register_framebuffer+0x3f3/0xa00 [ 37.337731] foo_register_framebuffer+0x3b/0x50 [savagefb] [ 37.338136] [ 37.338255] Freed by task 5475: [ 37.338492] kasan_set_track+0x3d/0x70 [ 37.338774] kasan_set_free_info+0x23/0x40 [ 37.339081] ____kasan_slab_free+0x10b/0x140 [ 37.339399] __kasan_slab_free+0x11/0x20 [ 37.339694] slab_free_freelist_hook+0x81/0x150 [ 37.340034] kfree+0x13e/0x290 [ 37.340267] do_unregister_framebuffer+0x21c/0x3d0 [ 37.340624] unregister_framebuffer+0x23/0x40 [ 37.340950] savagefb_remove+0x45/0xc0 [savagefb] [ 37.341302] pci_device_remove+0xa9/0x250 [ 37.341603] device_release_driver_internal+0x4f7/0x7a0 [ 37.341990] driver_detach+0x1e8/0x2c0 [ 37.342272] bus_remove_driver+0x134/0x290 [ 37.342577] driver_unregister+0x77/0xa0 [ 37.342873] pci_unregister_driver+0x2c/0x1c0 [ 37.343196] cleanup_module+0x15/0x1c [savagefb] [ 37.343543] __se_sys_delete_module+0x398/0x490 [ 37.343881] __x64_sys_delete_module+0x56/0x60 [ 37.344221] do_syscall_64+0x4d/0xc0 [ 37.344492] entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1633848148-29747-1-git-send-email-zheyuma97@gmail.com
2021-10-09video: fbdev: chipsfb: use memset_io() instead of memset()Christophe Leroy1-1/+1
While investigating a lockup at startup on Powerbook 3400C, it was identified that the fbdev driver generates alignment exception at startup: --- interrupt: 600 at memset+0x60/0xc0 NIP: c0021414 LR: c03fc49c CTR: 00007fff REGS: ca021c10 TRAP: 0600 Tainted: G W (5.14.2-pmac-00727-g12a41fa69492) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 44008442 XER: 20000100 DAR: cab80020 DSISR: 00017c07 GPR00: 00000007 ca021cd0 c14412e0 cab80000 00000000 00100000 cab8001c 00000004 GPR08: 00100000 00007fff 00000000 00000000 84008442 00000000 c0006fb4 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00100000 GPR24: 00000000 81800000 00000320 c15fa400 c14d1878 00000000 c14d1800 c094e19c NIP [c0021414] memset+0x60/0xc0 LR [c03fc49c] chipsfb_pci_init+0x160/0x580 --- interrupt: 600 [ca021cd0] [c03fc46c] chipsfb_pci_init+0x130/0x580 (unreliable) [ca021d20] [c03a3a70] pci_device_probe+0xf8/0x1b8 [ca021d50] [c043d584] really_probe.part.0+0xac/0x388 [ca021d70] [c043d914] __driver_probe_device+0xb4/0x170 [ca021d90] [c043da18] driver_probe_device+0x48/0x144 [ca021dc0] [c043e318] __driver_attach+0x11c/0x1c4 [ca021de0] [c043ad30] bus_for_each_dev+0x88/0xf0 [ca021e10] [c043c724] bus_add_driver+0x190/0x22c [ca021e40] [c043ee94] driver_register+0x9c/0x170 [ca021e60] [c0006c28] do_one_initcall+0x54/0x1ec [ca021ed0] [c08246e4] kernel_init_freeable+0x1c0/0x270 [ca021f10] [c0006fdc] kernel_init+0x28/0x11c [ca021f30] [c0017148] ret_from_kernel_thread+0x14/0x1c Instruction dump: 7d4601a4 39490777 7d4701a4 39490888 7d4801a4 39490999 7d4901a4 39290aaa 7d2a01a4 4c00012c 4bfffe88 0fe00000 <4bfffe80> 9421fff0 38210010 48001970 This is due to 'dcbz' instruction being used on non-cached memory. 'dcbz' instruction is used by memset() to zeroize a complete cacheline at once, and memset() is not expected to be used on non cached memory. When performing a 'sparse' check on fbdev driver, it also appears that the use of memset() is unexpected: drivers/video/fbdev/chipsfb.c:334:17: warning: incorrect type in argument 1 (different address spaces) drivers/video/fbdev/chipsfb.c:334:17: expected void * drivers/video/fbdev/chipsfb.c:334:17: got char [noderef] __iomem *screen_base drivers/video/fbdev/chipsfb.c:334:15: warning: memset with byte count of 1048576 Use fb_memset() instead of memset(). fb_memset() is defined as memset_io() for powerpc. Fixes: 8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK") Reported-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/884a54f1e5cb774c1d9b4db780209bee5d4f6718.1631712563.git.christophe.leroy@csgroup.eu
2021-10-06video: fbdev: gbefb: Only instantiate device when built for IP32Mark Brown1-1/+1
The gbefb driver not only registers a driver but also the device for that driver. This is all well and good when run on the IP32 machines that are supported by the driver but since the driver supports building with COMPILE_TEST we might also be building on other platforms which do not have this hardware and will crash instantiating the driver. Add an IS_ENABLED() check so we compile out the device registration if we don't have the Kconfig option for the machine enabled. Fixes: 552ccf6b259d290c0c ("video: fbdev: gbefb: add COMPILE_TEST support") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210921212102.30803-1-broonie@kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06fbdev: simplefb: fix Kconfig dependenciesArnd Bergmann1-2/+3
Configurations with both CONFIG_FB_SIMPLE=y and CONFIG_DRM_SIMPLEDRM=m are allowed by Kconfig because the 'depends on !DRM_SIMPLEDRM' dependency does not disallow FB_SIMPLE as long as SIMPLEDRM is not built-in. This can however result in a build failure when cfb_fillrect() etc are then also in loadable modules: x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x1f8): undefined reference to `cfb_fillrect' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x200): undefined reference to `cfb_copyarea' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x208): undefined reference to `cfb_imageblit' To work around this, change FB_SIMPLE to be a 'tristate' symbol, which still allows both to be =m together, but not one of them to be =y if the other one is =m. If a distro kernel picks this configuration, it can be determined by local policy which of the two modules gets loaded. The 'of_chosen' export is needed as this is the first loadable module referencing it. Alternatively, the Kconfig dependency could be changed to 'depends on DRM_SIMPLEDRM=n', which would forbid the configuration with both drivers. Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Acked-by: Rob Herring <robh@kernel.org> # for drivers/of/ Link: https://lore.kernel.org/all/20210721151839.2484245-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Cc: Maxime Ripard <maxime@cerno.tech> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Borislav Petkov <bp@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Peter Collingbourne <pcc@google.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v5.14+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210928145243.1098064-1-arnd@kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-09-23backlight: Propagate errors from get_brightness()Thomas Weißschuh1-5/+17
backlight.h documents "struct backlight_ops->get_brightness()" to return a negative errno on failure. So far these errors have not been handled in the backlight core. This leads to negative values being exposed through sysfs although only positive values are documented to be reported. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-09-22video: backlight: Drop maximum brightness override for brightness zeroMarek Vasut1-6/+0
The note in c2adda27d202f ("video: backlight: Add of_find_backlight helper in backlight.c") says that gpio-backlight uses brightness as power state. This has been fixed since in ec665b756e6f7 ("backlight: gpio-backlight: Correct initial power state handling") and other backlight drivers do not require this workaround. Drop the workaround. This fixes the case where e.g. pwm-backlight can perfectly well be set to brightness 0 on boot in DT, which without this patch leads to the display brightness to be max instead of off. Fixes: c2adda27d202f ("video: backlight: Add of_find_backlight helper in backlight.c") Cc: <stable@vger.kernel.org> # 5.4+ Cc: <stable@vger.kernel.org> # 4.19.x: ec665b756e6f7: backlight: gpio-backlight: Correct initial power state handling Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-09-18tgafb: clarify dependenciesLinus Torvalds1-1/+3
The TGA boards were based on the DECchip 21030 PCI graphics accelerator used mainly for alpha, and existed in a TURBOchannel (TC) version for the DECstation (MIPS) workstations. However, the config option for the TGA code is a bit confused, and says depends on FB && (ALPHA || TC) because people didn't really want to enable the option for random PCI environments, so the "ALPHA" stands in for that case (while the TC case is then the MIPS DECstation case). So that config dependency is kind of a mixture of architecture and bus choices. But it's incorrect, in that there were non-PCI-based alpha hardware, and then the driver just causes warnings: drivers/video/fbdev/tgafb.c:1532:13: error: ‘tgafb_unregister’ defined but not used [-Werror=unused-function] 1532 | static void tgafb_unregister(struct device *dev) | ^~~~~~~~~~~~~~~~ drivers/video/fbdev/tgafb.c:1387:12: error: ‘tgafb_register’ defined but not used [-Werror=unused-function] 1387 | static int tgafb_register(struct device *dev) | ^~~~~~~~~~~~~~ so let's make the config option dependencies a bit more explict: depends on FB depends on PCI || TC depends on ALPHA || TC where that first "FB" is the software configuration dependency, the second "PCI || TC" is the hardware bus dependency, while that final "ALPHA || TC" dependency is the "don't bother asking except for these situations. We could make that third case have "COMPILE_TEST" as an option, and mark the register/unregister functions as __maybe_unused, but I'm not sure it's really worth it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-15Merge drm/drm-next into drm-intel-nextRodrigo Vivi3-46/+89
Catch-up on 5.15-rc1 and sync with drm-intel-gt-next to prepare the PXP topic branch. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-09-10Merge tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+6
Pull drm fixes from Dave Airlie: "Just an initial bunch of fixes for the merge window, amdgpu is most of them with a few ttm fixes and an fbdev avoid multiply overflow fix. core: - Make some dma-buf config options depend on DMA_SHARED_BUFFER - Handle multiplication overflow of fbdev xres/yres in the core ttm: - Fix ttm_bo_move_memcpy() when ttm_resource is subclassed - Fix ttm deadlock if target BO isn't idle - ttm build fix - ttm docs fix dma-buf: - config option fixes fbdev: - limit resolutions to avoid int overflow i915: - stddef change. amdgpu: - Misc cleanups, typo fixes - EEPROM fix - Add some new PCI IDs - Scatter/Gather display support for Yellow Carp - PCIe DPM fix for RKL platforms - RAS fix amdkfd: - SVM fix vc4: - static function fix mgag200: - fix uninit var panfrost: - lock_region fixes" * tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm: (36 commits) drm/ttm: Fix a deadlock if the target BO is not idle during swap fbmem: don't allow too huge resolutions dma-buf: DMABUF_SYSFS_STATS should depend on DMA_SHARED_BUFFER dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFER drm/i915: use linux/stddef.h due to "isystem: trim/fixup stdarg.h and other headers" dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER drm/amdkfd: drop process ref count when xnack disable drm/amdgpu: enable more pm sysfs under SRIOV 1-VF mode drm/amdgpu: fix fdinfo race with process exit drm/amdgpu: Fix a deadlock if previous GEM object allocation fails drm/amdgpu: stop scheduler when calling hw_fini (v2) drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amd/display: Initialize lt_settings on instantiation drm/amd/display: cleanup idents after a revert drm/amd/display: Fix memory leak reported by coverity drm/ttm: Fix ttm_bo_move_memcpy() for subclassed struct ttm_resource drm/amdgpu/swsmu: fix spelling mistake "minimun" -> "minimum" drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform drm/amdgpu: show both cmd id and name when psp cmd failed drm/amd/display: setup system context for APUs ...
2021-09-08fbmem: don't allow too huge resolutionsTetsuo Handa1-0/+6
syzbot is reporting page fault at vga16fb_fillrect() [1], for vga16fb_check_var() is failing to detect multiplication overflow. if (vxres * vyres > maxmem) { vyres = maxmem / vxres; if (vyres < yres) return -ENOMEM; } Since no module would accept too huge resolutions where multiplication overflow happens, let's reject in the common path. Link: https://syzkaller.appspot.com/bug?extid=04168c8063cfdde1db5e [1] Reported-by: syzbot <syzbot+04168c8063cfdde1db5e@syzkaller.appspotmail.com> Debugged-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/185175d6-227a-7b55-433d-b070929b262c@i-love.sakura.ne.jp
2021-09-07Merge tag 'backlight-next-5.15' of ↵Linus Torvalds2-46/+83
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Fix-ups: - Improve bootloader/kernel device handover Bug Fixes: - Stabilise backlight in ktd253 driver" * tag 'backlight-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Improve bootloader/kernel device handover backlight: ktd253: Stabilize backlight
2021-08-19backlight: pwm_bl: Improve bootloader/kernel device handoverDaniel Thompson1-26/+28
Currently there are (at least) two problems in the way pwm_bl starts managing the enable_gpio pin. Both occur when the backlight is initially off and the driver finds the pin not already in output mode and, as a result, unconditionally switches it to output-mode and asserts the signal. Problem 1: This could cause the backlight to flicker since, at this stage in driver initialisation, we have no idea what the PWM and regulator are doing (an unconfigured PWM could easily "rest" at 100% duty cycle). Problem 2: This will cause us not to correctly honour the post_pwm_on_delay (which also risks flickers). Fix this by moving the code to configure the GPIO output mode until after we have examines the handover state. That allows us to initialize enable_gpio to off if the backlight is currently off and on if the backlight is on. Cc: stable@vger.kernel.org Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-08-16Merge drm/drm-next into drm-intel-nextJani Nikula10-64/+133
Catch up with drm core changes. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-08-13fbdev/efifb: Release PCI device's runtime PM ref during FB destroyImre Deak1-7/+14
Atm the EFI FB platform driver gets a runtime PM reference for the associated GFX PCI device during probing the EFI FB platform device and releases it only when the platform device gets unbound. When fbcon switches to the FB provided by the PCI device's driver (for instance i915/drmfb), the EFI FB will get only unregistered without the EFI FB platform device getting unbound, keeping the runtime PM reference acquired during the platform device probing. This reference will prevent the PCI driver from runtime suspending the device. Fix this by releasing the RPM reference from the EFI FB's destroy hook, called when the FB gets unregistered. While at it assert that pm_runtime_get_sync() didn't fail. v2: - Move pm_runtime_get_sync() before register_framebuffer() to avoid its race wrt. efifb_destroy()->pm_runtime_put(). (Daniel) - Assert that pm_runtime_get_sync() didn't fail. - Clarify commit message wrt. platform/PCI device/driver and driver removal vs. device unbinding. Fixes: a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210809133146.2478382-1-imre.deak@intel.com
2021-07-27video: fbdev: ssd1307fb: Cache address rangesGeert Uytterhoeven1-2/+25
Cache the column and page ranges, to avoid doing unneeded I2C transfers when the values haven't changed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-6-geert@linux-m68k.org
2021-07-27video: fbdev: ssd1307fb: Optimize screen updatesGeert Uytterhoeven1-21/+29
Currently, each screen update triggers an I2C transfer of all screen data, up to 1 KiB of data for a 128x64 display, which takes at least 20 ms in Fast mode. Reduce the amount of transferred data by only updating the rectangle that changed. Remove the calls to ssd1307fb_set_col_range() and ssd1307fb_set_page_range() during initialization, as ssd1307fb_update_rect() now takes care of that. Note that for now the optimized operation is only used for fillrect, copyarea, and imageblit, which are used by fbcon. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-5-geert@linux-m68k.org
2021-07-27video: fbdev: ssd1307fb: Extract ssd1307fb_set_{col,page}_range()Geert Uytterhoeven1-20/+37
Extract the code to set the column and page ranges into two helper functions. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-4-geert@linux-m68k.org
2021-07-27video: fbdev: ssd1307fb: Simplify ssd1307fb_update_display()Geert Uytterhoeven1-7/+10
Simplify the nested loops to handle conversion from linear frame buffer to ssd1307 page layout: 1. Move last page handling one level up, as the value of "m" is the same inside a page, 2. array->data[] is filled linearly, so there is no need to recalculate array_idx over and over again; a simple increment is sufficient. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-3-geert@linux-m68k.org
2021-07-27video: fbdev: ssd1307fb: Propagate errors via ssd1307fb_update_display()Geert Uytterhoeven1-6/+12
Make ssd1307fb_update_display() return an error code, so callers that can handle failures can propagate it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-2-geert@linux-m68k.org
2021-07-27Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst12-49/+299
Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-07-26video: ep93xx: Prepare clock before using itAlexander Sverdlin1-2/+2
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch to Common Clock Framework. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210726140001.24820-5-nikita.shubin@maquefel.me
2021-07-26video: fbdev: riva: Error out if 'pixclock' equals zeroZheyu Ma1-0/+3
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error. Fix this by checking whether 'pixclock' is zero first. The following log reveals it: [ 33.396850] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 33.396864] CPU: 5 PID: 11754 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #222 [ 33.396883] RIP: 0010:riva_load_video_mode+0x417/0xf70 [ 33.396969] Call Trace: [ 33.396973] ? debug_smp_processor_id+0x1c/0x20 [ 33.396984] ? tick_nohz_tick_stopped+0x1a/0x90 [ 33.396996] ? rivafb_copyarea+0x3c0/0x3c0 [ 33.397003] ? wake_up_klogd.part.0+0x99/0xd0 [ 33.397014] ? vprintk_emit+0x110/0x4b0 [ 33.397024] ? vprintk_default+0x26/0x30 [ 33.397033] ? vprintk+0x9c/0x1f0 [ 33.397041] ? printk+0xba/0xed [ 33.397054] ? record_print_text.cold+0x16/0x16 [ 33.397063] ? __kasan_check_read+0x11/0x20 [ 33.397074] ? profile_tick+0xc0/0x100 [ 33.397084] ? __sanitizer_cov_trace_const_cmp4+0x24/0x80 [ 33.397094] ? riva_set_rop_solid+0x2a0/0x2a0 [ 33.397102] rivafb_set_par+0xbe/0x610 [ 33.397111] ? riva_set_rop_solid+0x2a0/0x2a0 [ 33.397119] fb_set_var+0x5bf/0xeb0 [ 33.397127] ? fb_blank+0x1a0/0x1a0 [ 33.397134] ? lock_acquire+0x1ef/0x530 [ 33.397143] ? lock_release+0x810/0x810 [ 33.397151] ? lock_is_held_type+0x100/0x140 [ 33.397159] ? ___might_sleep+0x1ee/0x2d0 [ 33.397170] ? __mutex_lock+0x620/0x1190 [ 33.397180] ? trace_hardirqs_on+0x6a/0x1c0 [ 33.397190] do_fb_ioctl+0x31e/0x700 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-4-git-send-email-zheyuma97@gmail.com
2021-07-26video: fbdev: kyro: Error out if 'pixclock' equals zeroZheyu Ma1-0/+3
The userspace program could pass any values to the driver through ioctl() interface. if the driver doesn't check the value of 'pixclock', it may cause divide error because the value of 'lineclock' and 'frameclock' will be zero. Fix this by checking whether 'pixclock' is zero in kyrofb_check_var(). The following log reveals it: [ 103.073930] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 103.073942] CPU: 4 PID: 12483 Comm: syz-executor Not tainted 5.14.0-rc2-00478-g2734d6c1b1a0-dirty #118 [ 103.073959] RIP: 0010:kyrofb_set_par+0x316/0xc80 [ 103.074045] Call Trace: [ 103.074048] ? ___might_sleep+0x1ee/0x2d0 [ 103.074060] ? kyrofb_ioctl+0x330/0x330 [ 103.074069] fb_set_var+0x5bf/0xeb0 [ 103.074078] ? fb_blank+0x1a0/0x1a0 [ 103.074085] ? lock_acquire+0x3bd/0x530 [ 103.074094] ? lock_release+0x810/0x810 [ 103.074103] ? ___might_sleep+0x1ee/0x2d0 [ 103.074114] ? __mutex_lock+0x620/0x1190 [ 103.074126] ? trace_hardirqs_on+0x6a/0x1c0 [ 103.074137] do_fb_ioctl+0x31e/0x700 [ 103.074144] ? fb_getput_cmap+0x280/0x280 [ 103.074152] ? rcu_read_lock_sched_held+0x11/0x80 [ 103.074162] ? rcu_read_lock_sched_held+0x11/0x80 [ 103.074171] ? __sanitizer_cov_trace_switch+0x67/0xf0 [ 103.074181] ? __sanitizer_cov_trace_const_cmp2+0x20/0x80 [ 103.074191] ? do_vfs_ioctl+0x14b/0x16c0 [ 103.074199] ? vfs_fileattr_set+0xb60/0xb60 [ 103.074207] ? rcu_read_lock_sched_held+0x11/0x80 [ 103.074216] ? lock_release+0x483/0x810 [ 103.074224] ? __fget_files+0x217/0x3d0 [ 103.074234] ? __fget_files+0x239/0x3d0 [ 103.074243] ? do_fb_ioctl+0x700/0x700 [ 103.074250] fb_ioctl+0xe6/0x130 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-3-git-send-email-zheyuma97@gmail.com
2021-07-26video: fbdev: asiliantfb: Error out if 'pixclock' equals zeroZheyu Ma1-0/+3
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error. Fix this by checking whether 'pixclock' is zero first. The following log reveals it: [ 43.861711] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 43.861737] CPU: 2 PID: 11764 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #224 [ 43.861756] RIP: 0010:asiliantfb_check_var+0x4e/0x730 [ 43.861843] Call Trace: [ 43.861848] ? asiliantfb_remove+0x190/0x190 [ 43.861858] fb_set_var+0x2e4/0xeb0 [ 43.861866] ? fb_blank+0x1a0/0x1a0 [ 43.861873] ? lock_acquire+0x1ef/0x530 [ 43.861884] ? lock_release+0x810/0x810 [ 43.861892] ? lock_is_held_type+0x100/0x140 [ 43.861903] ? ___might_sleep+0x1ee/0x2d0 [ 43.861914] ? __mutex_lock+0x620/0x1190 [ 43.861921] ? do_fb_ioctl+0x313/0x700 [ 43.861929] ? mutex_lock_io_nested+0xfa0/0xfa0 [ 43.861936] ? __this_cpu_preempt_check+0x1d/0x30 [ 43.861944] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 43.861952] ? lockdep_hardirqs_on+0x59/0x100 [ 43.861959] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 43.861967] ? trace_hardirqs_on+0x6a/0x1c0 [ 43.861978] do_fb_ioctl+0x31e/0x700 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-2-git-send-email-zheyuma97@gmail.com
2021-07-23Merge tag 'drm-misc-next-2021-07-22' of ↵Dave Airlie4-5/+10
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15-rc1: UAPI Changes: - Remove sysfs stats for dma-buf attachments, as it causes a performance regression. Previous merge is not in a rc kernel yet, so no userspace regression possible. Cross-subsystem Changes: - Sanitize user input in kyro's viewport ioctl. - Use refcount_t in fb_info->count - Assorted fixes to dma-buf. - Extend x86 efifb handling to all archs. - Fix neofb divide by 0. - Document corpro,gm7123 bridge dt bindings. Core Changes: - Slightly rework drm master handling. - Cleanup vgaarb handling. - Assorted fixes. Driver Changes: - Add support for ws2401 panel. - Assorted fixes to stm, ast, bochs. - Demidlayer ingenic irq. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
2021-07-21backlight: ktd253: Stabilize backlightLinus Walleij1-20/+55
Remove interrupt disablement during backlight setting. It is way to dangerous and makes platforms instable by having it miss vblank IRQs leading to the graphics derailing. The code is using ndelay() which is not available on platforms such as ARM and will result in 32 * udelay(1) which is substantial. Add some code to detect if an interrupt occurs during the tight loop and in that case just redo it from the top. Fixes: 5317f37e48b9 ("backlight: Add Kinetic KTD253 backlight driver") Cc: Stephan Gerhold <stephan@gerhold.net> Reported-by: newbyte@disroot.org Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-07-21video: fbdev: neofb: add a check against divide errorZheyu Ma1-1/+1
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error because of the 'PICOS2KHZ' macro. Fix this by checking whether 'pixclock' is zero first. The following log reveals it: [ 53.093806] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.093838] CPU: 3 PID: 11763 Comm: hang Not tainted 5.14.0-rc2-00478-g2734d6c1b1a0 #215 [ 53.093859] RIP: 0010:neofb_check_var+0x80/0xe50 [ 53.093951] Call Trace: [ 53.093956] ? neofb_setcolreg+0x2b0/0x2b0 [ 53.093968] fb_set_var+0x2e4/0xeb0 [ 53.093977] ? fb_blank+0x1a0/0x1a0 [ 53.093984] ? lock_acquire+0x1ef/0x530 [ 53.093996] ? lock_release+0x810/0x810 [ 53.094005] ? lock_is_held_type+0x100/0x140 [ 53.094016] ? ___might_sleep+0x1ee/0x2d0 [ 53.094028] ? __mutex_lock+0x620/0x1190 [ 53.094036] ? do_fb_ioctl+0x313/0x700 [ 53.094044] ? mutex_lock_io_nested+0xfa0/0xfa0 [ 53.094051] ? __this_cpu_preempt_check+0x1d/0x30 [ 53.094060] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 53.094069] ? lockdep_hardirqs_on+0x59/0x100 [ 53.094076] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 53.094085] ? trace_hardirqs_on+0x6a/0x1c0 [ 53.094096] do_fb_ioctl+0x31e/0x700 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1626871424-27708-1-git-send-email-zheyuma97@gmail.com
2021-07-21video: fbdev: arcfb: remove redundant initialization of variable errColin Ian King1-1/+1
The variable err is being initialized with a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210721102608.42694-1-colin.king@canonical.com
2021-07-21Merge tag 'drm-misc-next-2021-07-16' of ↵Dave Airlie1-3/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling. Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes. Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
2021-07-19fbmem: Convert from atomic_t to refcount_t on fb_info->countXiyu Yang1-3/+3
refcount_t type and corresponding API can protect refcounters from accidental underflow and overflow and further use-after-free situations. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1626674392-55857-1-git-send-email-xiyuyang19@fudan.edu.cn
2021-07-19video: fbdev: kyro: fix a DoS bug by restricting user inputZheyu Ma1-0/+5
The user can pass in any value to the driver through the 'ioctl' interface. The driver dost not check, which may cause DoS bugs. The following log reveals it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:SetOverlayViewPort+0x133/0x5f0 drivers/video/fbdev/kyro/STG4000OverlayDevice.c:476 Call Trace: kyro_dev_overlay_viewport_set drivers/video/fbdev/kyro/fbdev.c:378 [inline] kyrofb_ioctl+0x2eb/0x330 drivers/video/fbdev/kyro/fbdev.c:603 do_fb_ioctl+0x1f3/0x700 drivers/video/fbdev/core/fbmem.c:1171 fb_ioctl+0xeb/0x130 drivers/video/fbdev/core/fbmem.c:1185 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19b/0x220 fs/ioctl.c:739 do_syscall_64+0x32/0x80 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1626235762-2590-1-git-send-email-zheyuma97@gmail.com
2021-07-16Merge tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-7/+5
Pull drm fixes from Dave Airlie: "Regular rc2 fixes though a bit more than usual at rc2 stage, people must have been testing early or else some fixes from last week got a bit laggy. There is one larger change in the amd fixes to amalgamate some power management code on the newer chips with the code from the older chips, it should only affects chips where support was introduced in rc1 and it should make future fixes easier to maintain probably a good idea to merge it now. Otherwise it's mostly fixes across the board. dma-buf: - Fix fence leak in sync_file_merge() error code drm/panel: - nt35510: Don't fail on DSI reads fbdev: - Avoid use-after-free by not deleting current video mode ttm: - Avoid NULL-ptr deref in ttm_range_man_fini() vmwgfx: - Fix a merge commit qxl: - fix a TTM regression amdgpu: - SR-IOV fixes - RAS fixes - eDP fixes - SMU13 code unification to facilitate fixes in the future - Add new renoir DID - Yellow Carp fixes - Beige Goby fixes - Revert a bunch of TLB fixes that caused regressions - Revert an LTTPR display regression amdkfd - Fix VRAM access regression - SVM fixes i915: - Fix -EDEADLK handling regression - Drop the page table optimisation" * tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/amdgpu: add another Renoir DID drm/ttm: add a check against null pointer dereference drm/i915/gtt: drop the page table optimisation drm/i915/gt: Fix -EDEADLK handling regression drm/amd/pm: Add waiting for response of mode-reset message for yellow carp Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping" Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update" Revert "drm/amdkfd: Make TLB flush conditional on mapping" Revert "drm/amdgpu: Fix warning of Function parameter or member not described" Revert "drm/amdkfd: Add memory sync before TLB flush on unmap" drm/amd/pm: Fix BACO state setting for Beige_Goby drm/amdgpu: Restore msix after FLR drm/amdkfd: Allow CPU access for all VRAM BOs drm/amdgpu/display - only update eDP's backlight level when necessary drm/amdkfd: handle fault counters on invalid address drm/amdgpu: Correct the irq numbers for virtual crtc drm/amd/display: update header file name drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carp drm/amd/display: remove faulty assert Revert "drm/amd/display: Always write repeater mode regardless of LTTPR" ...
2021-07-13video: fbdev: Fix fall-through warning for ClangGustavo A. R. Silva1-0/+2
Fix the following fallthrough warning (arm64-randconfig with Clang): drivers/video/fbdev/xilinxfb.c:244:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-13fbmem: Do not delete the mode that is still in useZhen Lei1-7/+5
The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178ccd6d ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com
2021-07-09Merge tag 'for-linus-5.14-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - Support for optimized routines based on the host CPU - Support for PCI via virtio - Various fixes * tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: remove unneeded semicolon in um_arch.c um: Remove the repeated declaration um: fix error return code in winch_tramp() um: fix error return code in slip_open() um: Fix stack pointer alignment um: implement flush_cache_vmap/flush_cache_vunmap um: add a UML specific futex implementation um: enable the use of optimized xor routines in UML um: Add support for host CPU flags and alignment um: allow not setting extra rpaths in the linux binary um: virtio/pci: enable suspend/resume um: add PCI over virtio emulation driver um: irqs: allow invoking time-travel handler multiple times um: time-travel/signals: fix ndelay() in interrupt um: expose time-travel mode to userspace side um: export signals_enabled directly um: remove unused smp_sigio_handler() declaration lib: add iomem emulation (logic_iomem) um: allow disabling NO_IOMEM