summaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-02Merge tag 'kbuild-v5.5' of ↵Linus Torvalds3-10/+520
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove unneeded asm headers from hexagon, ia64 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving - add 'helpnewconfig' target, which shows help for new CONFIG options - support 'make nsdeps' for external modules - make rebuilds faster by deleting $(wildcard $^) checks - remove compile tests for kernel-space headers - refactor modpost to simplify modversion handling - make single target builds faster - optimize and clean up scripts/kallsyms.c - refactor various Makefiles and scripts * tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits) MAINTAINERS: update Kbuild/Kconfig maintainer's email address scripts/kallsyms: remove redundant initializers scripts/kallsyms: put check_symbol_range() calls close together scripts/kallsyms: make check_symbol_range() void function scripts/kallsyms: move ignored symbol types to is_ignored_symbol() scripts/kallsyms: move more patterns to the ignored_prefixes array scripts/kallsyms: skip ignored symbols very early scripts/kallsyms: add const qualifiers where possible scripts/kallsyms: make find_token() return (unsigned char *) scripts/kallsyms: replace prefix_underscores_count() with strspn() scripts/kallsyms: add sym_name() to mitigate cast ugliness scripts/kallsyms: remove unneeded length check for prefix matching scripts/kallsyms: remove redundant is_arm_mapping_symbol() scripts/kallsyms: set relative_base more effectively scripts/kallsyms: shrink table before sorting it scripts/kallsyms: fix definitely-lost memory leak scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE kbuild: make single target builds even faster modpost: respect the previous export when 'exported twice' is warned modpost: do not set ->preloaded for symbols from Module.symvers ...
2019-12-01Merge branch 'i2c/for-5.5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has mostly driver updates this time. The few noteworthy changes are: the core has now support for analog and digital filters with at91 being the first user, a core addition to replace the NULL returning i2c_new_probed_device() with an ERR_PTR variant, and the pxa driver has finally being moved to use the generic I2C slave interface. We have quite a significant number of reviews per patch this time, so thank you to all involved!" * 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) video: fbdev: matrox: convert to i2c_new_scanned_device i2c: icy: convert to i2c_new_scanned_device i2c: replace i2c_new_probed_device with an ERR_PTR variant i2c: Fix Kconfig indentation i2c: smbus: Don't filter out duplicate alerts i2c: i801: Correct Intel Jasper Lake SOC naming i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop i2c: iproc: Add i2c repeated start capability i2c: remove helpers for ref-counting clients i2c: tegra: Use dma_request_chan() directly for channel request i2c: sh_mobile: Use dma_request_chan() directly for channel request i2c: qup: Use dma_request_chan() directly for channel request i2c: at91: Use dma_request_chan() directly for channel request i2c: rcar: Remove superfluous call to clk_get_rate() i2c: pxa: remove unused i2c-slave APIs i2c: pxa: migrate to new i2c_slave APIs i2c: cros-ec-tunnel: Make the device acpi compatible i2c: stm32f7: report dma error during probe i2c: icy: no need to populate address for scanned device i2c: xiic: Fix kerneldoc warnings ...
2019-12-01Merge tag 'backlight-next-5.5' of ↵Linus Torvalds11-544/+1418
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Functionality: - Add support for an enable GPIO; lm3630a_bl - Add support for short circuit handling; qcom-wled - Add support for automatic string detection; qcom-wled Fix-ups: - Update Device Tree bindings; lm3630a-backlight, led-backlight, qcom-wled - Constify; ipaq_micro_bl - Optimise for CPU cycles; pwm_bl - Coding style fix-ups; pwm_bl - Trivial fix-ups (white space, comments, renaming); pwm_bl, gpio_backlight, qcom-wled - Kconfig dependency hacking; LCD_HP700 - Rename, refactor and add peripherals; pm8941-wled => qcom-wled - Make use of GPIO look-up tables; tosa_bl, tosa_lcd - Remove superfluous code; gpio_backlight - Adapt GPIO direction handling; gpio_backlight - Remove legacy use of platform data; gpio_backlight Bug Fixes: - Provide modules aliases; lm3630a_bl" * tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits) backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered" backlight: gpio: Pull gpio_backlight_initial_power_state() into probe backlight: gpio: Use a helper variable for &pdev->dev backlight: gpio: Remove unused fields from platform data sh: ecovec24: don't set unused fields in platform data backlight: gpio: Simplify the platform data handling sh: ecovec24: add additional properties to the backlight device backlight: gpio: Explicitly set the direction of the GPIO backlight: gpio: Remove stray newline backlight: gpio: Remove unneeded include video: backlight: tosa: Use GPIO lookup table backlight: qcom-wled: Add auto string detection logic backlight: qcom-wled: Add support for short circuit handling backlight: qcom-wled: Add support for WLED4 peripheral backlight: qcom-wled: Restructure the driver for WLED3 backlight: qcom-wled: Rename PM8941* to WLED3 backlight: qcom-wled: Add new properties for PMI8998 backlight: qcom-wled: Restructure the qcom-wled bindings backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c dt-bindings: backlight: lm3630a: Fix missing include ...
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-1/+11
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-30Merge tag 'hyperv-next-signed' of ↵Linus Torvalds2-33/+396
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Sasha Levin: - support for new VMBus protocols (Andrea Parri) - hibernation support (Dexuan Cui) - latency testing framework (Branden Bonaby) - decoupling Hyper-V page size from guest page size (Himadri Pandya) * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic drivers/hv: Replace binary semaphore with mutex drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86 HID: hyperv: Add the support of hibernation hv_balloon: Add the support of hibernation x86/hyperv: Implement hv_is_hibernation_supported() Drivers: hv: balloon: Remove dependencies on guest page size Drivers: hv: vmbus: Remove dependencies on guest page size x86: hv: Add function to allocate zeroed page for Hyper-V Drivers: hv: util: Specify ring buffer size using Hyper-V page size Drivers: hv: Specify receive buffer size using Hyper-V page size tools: hv: add vmbus testing tool drivers: hv: vmbus: Introduce latency testing video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host hv_netvsc: Add the support of hibernation hv_sock: Add the support of hibernation video: hyperv_fb: Add the support of hibernation scsi: storvsc: Add the support of hibernation Drivers: hv: vmbus: Add module parameter to cap the VMBus version ...
2019-11-28video: fbdev: matrox: convert to i2c_new_scanned_deviceWolfram Sang1-2/+2
Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). Make use of the new ERRPTR if suitable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas2-3/+3
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-11-27Merge tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds3-29/+9
Pull drm updates from Dave Airlie: "Lots of stuff in here, though it hasn't been too insane this merge apart from dealing with the security fun. uapi: - export different colorspace properties on DP vs HDMI - new fourcc for ARM 16x16 block format - syncobj: allow querying last submitted timeline value - DRM_FORMAT_BIG_ENDIAN defined as unsigned core: - allow using gem vma manager in ttm - connector/encoder/bridge doc fixes - allow more than 3 encoders for a connector - displayport mst suspend/resume reprobing support - vram lazy unmapping, uniform vram mm and gem vram - edid cleanups + AVI informframe bar info - displayport helpers - dpcd parser added dp_cec: - Allow a connector to be associated with a cec device ttm: - pipelining with no_gpu_wait fix - always keep BOs on the LRU sched: - allow free_job routine to sleep i915: - Block userptr from mappable GTT - i915 perf uapi versioning - OA stream dynamic reconfiguration - make context persistence optional - introduce DRM_I915_UNSTABLE Kconfig - add fake lmem testing under unstable - BT.2020 support for DP MSA - struct mutex elimination - Tigerlake display/PLL/power management improvements - Jasper Lake PCH support - refactor PMU for multiple GPUs - Icelake firmware update - Split out vga + switcheroo code amdgpu: - implement dma-buf import/export without helpers - vega20 RAS enablement - DC i2c over aux fixes - renoir GPU reset - DC HDCP support - BACO support for CI/VI asics - MSI-X support - Arcturus EEPROM support - Arcturus VCN encode support - VCN dynamic powergating on RV/RV2 amdkfd: - add navi12/14/renoir support to kfd radeon: - SI dpm fix ported from amdgpu - fix bad DMA on ppc platforms gma500: - memory leak fixes qxl: - convert to new gem mmap exynos: - build warning fix komeda: - add aclk sysfs attribute v3d: - userspace cleanup uapi change i810: - fix for underflow in dispatch ioctls ast: - refactor show_cursor mgag200: - refactor show_cursor arcgpu: - encoder finding improvements mediatek: - mipi_tx, dsi and partial crtc support for MT8183 SoC - rotation support meson: - add suspend/resume support omap: - misc refactors tegra: - DisplayPort support for Tegra 210, 186 and 194. - IOMMU-backed DMA API fixes panfrost: - fix lockdep issue - simplify devfreq integration rcar-du: - R8A774B1 SoC support - fixes for H2 ES2.0 sun4i: - vcc-dsi regulator support virtio-gpu: - vmexit vs spinlock fix - move to gem shmem helpers - handle large command buffers with cma" * tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits) drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10 drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF. drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF drm/amdgpu/gfx10: re-init clear state buffer after gpu reset merge fix for "ftrace: Rework event_create_dir()" drm/amdgpu: Update Arcturus golden registers drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt Revert "drm/amd/display: enable S/G for RAVEN chip" drm/amdgpu: disable gfxoff on original raven drm/amdgpu: remove experimental flag for Navi14 drm/amdgpu: disable gfxoff when using register read interface drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2) drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2 drm/radeon: fix bad DMA from INTERRUPT_CNTL2 drm/amd/display: Fix debugfs on MST connectors drm/amdgpu/nv: add asic func for fetching vbios from rom directly drm/amdgpu: put flush_delayed_work at first drm/amdgpu/vcn2.5: fix the enc loop with hw fini ...
2019-11-25Merge tag 'printk-for-5.5' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...
2019-11-21video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driverWei Hu2-21/+190
Without deferred IO support, hyperv_fb driver informs the host to refresh the entire guest frame buffer at fixed rate, e.g. at 20Hz, no matter there is screen update or not. This patch supports deferred IO for screens in graphics mode and also enables the frame buffer on-demand refresh. The highest refresh rate is still set at 20Hz. Currently Hyper-V only takes a physical address from guest as the starting address of frame buffer. This implies the guest must allocate contiguous physical memory for frame buffer. In addition, Hyper-V Gen 2 VMs only accept address from MMIO region as frame buffer address. Due to these limitations on Hyper-V host, we keep a shadow copy of frame buffer in the guest. This means one more copy of the dirty rectangle inside guest when doing the on-demand refresh. This can be optimized in the future with help from host. For now the host performance gain from deferred IO outweighs the shadow copy impact in the guest. Signed-off-by: Wei Hu <weh@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-21video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V hostWei Hu1-12/+147
Beginning from Windows 10 RS5+, VM screen resolution is obtained from host. The "video=hyperv_fb" boot time option is not needed, but still can be used to overwrite what the host specifies. The VM resolution on the host could be set by executing the powershell "set-vmvideo" command. Signed-off-by: Iouri Tarassov <iourit@microsoft.com> Signed-off-by: Wei Hu <weh@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-21video: hyperv_fb: Add the support of hibernationDexuan Cui1-0/+59
This patch depends on the vmbus side change of the definition of struct hv_driver. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20PCI/PM: Avoid exporting __pci_complete_power_transition()Rafael J. Wysocki1-1/+1
Notice that radeon_set_suspend(), which is the only caller of __pci_complete_power_transition() outside of pci.c, really only cares about the pci_platform_power_transition() invoked by it, so export the latter instead of it, update the radeon driver to call pci_platform_power_transition() directly and make __pci_complete_power_transition() static. Code rearrangement, no intentional functional impact. Link: https://lore.kernel.org/r/1731661.ykamz2Tiuf@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-14Merge v5.4-rc7 into drm-nextDave Airlie1-4/+4
We have the i915 security fixes to backmerge, but first let's clear the decks for other drivers to avoid a bigger mess. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-11-13backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Pull gpio_backlight_initial_power_state() into probeBartosz Golaszewski1-24/+14
The probe function in the gpio-backlight driver is quite short. If we pull gpio_backlight_initial_power_state() into probe we can drop two more fields from struct gpio_backlight and shrink the driver code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Use a helper variable for &pdev->devBartosz Golaszewski1-12/+11
Instead of dereferencing pdev each time, use a helper variable for the associated device pointer. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Simplify the platform data handlingBartosz Golaszewski1-51/+11
Now that the last user of platform data (sh ecovec24) defines a proper GPIO lookup and sets the 'default-on' device property, we can drop the platform_data-specific GPIO handling and unify a big chunk of code. The only field used from the platform data is now the fbdev pointer. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Explicitly set the direction of the GPIOBartosz Golaszewski1-5/+18
The GPIO backlight driver currently requests the line 'as is', without acively setting its direction. This can lead to problems: if the line is in input mode by default, we won't be able to drive it later when updating the status and also reading its initial value doesn't make sense for backlight setting. Request the line 'as is' initially, so that we can read its value without affecting it but then change the direction to output explicitly when setting the initial brightness. Also: check the current direction and only read the value if it's output. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Remove stray newlineBartosz Golaszewski1-1/+0
Remove a double newline from the driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Remove unneeded includeBartosz Golaszewski1-1/+0
We no longer use any symbols from of_gpio.h. Remove this include. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11video/logo: move pnmtologo tool to drivers/video/logo/ from scripts/Masahiro Yamada3-5/+520
This tool is only used by drivers/video/logo/Makefile. No reason to keep it in scripts/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11video/logo: simplify cmd_logoMasahiro Yamada1-9/+4
Shorten the code. It still works in the same way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11video: backlight: tosa: Use GPIO lookup tableArnd Bergmann3-12/+34
The driver should not require a machine specific header. Change it to pass the GPIO line through a lookup table, and move the timing generator definitions into the drivers itself. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-08Merge tag 'drm-misc-fixes-2019-11-07-1' of ↵Dave Airlie1-4/+4
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Some new documentation for GEM shmem madvise helpers - Fix for a state dereference in atomic self-refresh helpers - One compilation fix for c2p fbdev helpers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191107082215.GA34850@gilmour.lan
2019-11-04fbdev: c2p: Fix link failure on non-inliningGeert Uytterhoeven1-4/+4
When the compiler decides not to inline the Chunky-to-Planar core functions, the build fails with: c2p_planar.c:(.text+0xd6): undefined reference to `c2p_unsupported' c2p_planar.c:(.text+0x1dc): undefined reference to `c2p_unsupported' c2p_iplan2.c:(.text+0xc4): undefined reference to `c2p_unsupported' c2p_iplan2.c:(.text+0x150): undefined reference to `c2p_unsupported' Fix this by marking the functions __always_inline. While this could be triggered before by manually enabling both CONFIG_OPTIMIZE_INLINING and CONFIG_CC_OPTIMIZE_FOR_SIZE, it was exposed in the m68k defconfig by commit ac7c3e4ff401b304 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly"). Fixes: 9012d011660ea5cf ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING") Reported-by: noreply@ellerman.id.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190927094708.11563-1-geert@linux-m68k.org
2019-11-01backlight: qcom-wled: Add auto string detection logicKiran Gunda1-6/+394
The auto string detection algorithm checks if the current WLED sink configuration is valid. It tries enabling every sink and checks if the OVP fault is observed. Based on this information it detects and enables the valid sink configuration. Auto calibration will be triggered when the OVP fault interrupts are seen frequently thereby it tries to fix the sink configuration. The auto-detection also kicks in when the connected LED string of the display-backlight malfunctions (because of damage) and requires the damaged string to be turned off to prevent the complete panel and/or board from being damaged. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Add support for short circuit handlingKiran Gunda1-4/+140
Handle the short circuit interrupt and check if the short circuit interrupt is valid. Re-enable the module to check if it goes away. Disable the module altogether if the short circuit event persists. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Add support for WLED4 peripheralKiran Gunda1-2/+253
WLED4 peripheral is present on some PMICs like pmi8998 and pm660l. It has a different register map and configurations are also different. Add support for it. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Restructure the driver for WLED3Kiran Gunda1-139/+234
Restructure the driver to add the support for new WLED peripherals. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Rename PM8941* to WLED3Kiran Gunda1-123/+125
Rename the PM8941* references as WLED3 to make the driver generic and have WLED support for other PMICs. Also rename "i_boost_limit" and "i_limit" variables to "boost_i_limit" and "string_i_limit" respectively to resemble the corresponding register names. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.cKiran Gunda3-5/+5
pm8941-wled.c driver is supporting the WLED peripheral on pm8941. Rename it to qcom-wled.c so that it can support WLED on multiple PMICs. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-23compat_ioctl: move ATYFB_CLK handling to atyfb driverArnd Bergmann1-1/+11
These are two obscure ioctl commands, in a driver that only has compatible commands, so just let the driver handle this itself. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-18vgacon: Use pr_warn instead of pr_warningKefeng Wang1-3/+3
As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of pr_warning"), removing pr_warning so all logging messages use a consistent <prefix>_warn style. Let's do it. Link: http://lkml.kernel.org/r/20191018031850.48498-24-wangkefeng.wang@huawei.com To: linux-kernel@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-18backlight: Kconfig: jornada720: Use CONFIG_PREEMPTIONThomas Gleixner1-2/+2
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the Kconfig dependency to CONFIG_PREEMPTION. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [Sebastian: +LCD_HP700] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov2-3/+3
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-10-14backlight: pwm_bl: Switch to power-of-2 base for fixed-point mathRasmus Villemoes1-10/+12
Using a power-of-2 instead of power-of-10 base makes the computations much cheaper. 2^16 is safe; retval never becomes more than 2^48 + 2^32/2. On a 32 bit platform, the very expensive 64/32 division at the end of cie1931() instead becomes essentially free (a shift by 32 is just a register rename). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Drop use of int_pow()Rasmus Villemoes1-1/+2
For a fixed small exponent of 3, it is more efficient to simply use two explicit multiplications rather than calling the int_pow() library function: Aside from the function call overhead, its implementation using repeated squaring means it ends up doing four 64x64 multiplications. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Eliminate a 64/32 divisionRasmus Villemoes1-1/+1
lightness*1000 is nowhere near overflowing 32 bits, so we can just use an ordinary 32/32 division, which is much cheaper than the 64/32 done via do_div(). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Fix cie1913 comments and constantRasmus Villemoes1-3/+9
The "break-even" point for the two formulas is L==8, which is also what the code actually implements. [Incidentally, at that point one has Y=0.008856, not 0.08856]. Moreover, all the sources I can find say the linear factor is 903.3 rather than 902.3, which makes sense since then the formulas agree at L==8, both yielding the 0.008856 figure to four significant digits. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Add missing curly branches in else branchMatthias Kaehlcke1-1/+2
Add curly braces to an 'else' branch in pwm_backlight_update_status() to match the corresponding 'if' branch. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Don't assign levels table repeatedlyMatthias Kaehlcke1-4/+3
pwm_backlight_probe() re-assigns pb->levels for every brightness level. This is not needed and was likely not intended, since neither side of the assignment changes during the loop. Assign the field only once. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-11Merge tag 'drm-misc-next-2019-10-09-2' of ↵Dave Airlie3-29/+9
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.5: UAPI Changes: -Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun) -fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond) -not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should not reach userspace, but adding here to specifically call that out (Daniel) -i810: Prevent underflow in dispatch ioctls (Dan) -komeda: Add ACLK sysfs attribute (Mihail) -v3d: Allow userspace to clean up after render jobs (Iago) Cross-subsystem Changes: -MAINTAINERS: -Add Alyssa & Steven as panfrost reviewers (Rob) -Add Jernej as DE2 reviewer (Maxime) -Add Chen-Yu as Allwinner maintainer (Maxime) -staging: Make some stack arrays static const (Colin) Core Changes: -ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd) -docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent) -connector: Allow more than 3 possible encoders for a connector (José) -dp_cec: Allow a connector to be associated with a cec device (Dariusz) -various: Fix some compile/sparse warnings (Ville) -mm: Ensure mm node removals are properly serialised (Chris) -panel: Specify the type of panel for drm_panels for later use (Laurent) -panel: Use drm_panel_init to init device and funcs (Laurent) -mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude) -vram: -Add lazy unmapping for gem bo's (Thomas) -Unify and rationalize vram mm and gem vram (Thomas) -Expose vmap and vunmap for gem vram objects (Thomas) -Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas) Driver Changes: -various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris) -ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas) -komeda: -Add error event printing (behind CONFIG) and reg dump support (Lowry) -Add suspend/resume support (Lowry) -Workaround D71 shadow registers not flushing on disable (Lowry) -meson: Add suspend/resume support (Neil) -omap: Miscellaneous refactors and improvements (Tomi/Jyri) -panfrost/shmem: Silence lockdep by using mutex_trylock (Rob) -panfrost: Miscellaneous small fixes (Rob/Steven) -sti: Fix warnings (Benjamin/Linus) -sun4i: -Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan) -A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy) -virtio: -Add module param to switch resource reuse workaround on/off (Gerd) -Avoid calling vmexit while holding spinlock (Gerd) -Use gem shmem helpers instead of ttm (Gerd) -Accommodate command buffer allocations too big for cma (David) Cc: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lyude Paul <lyude@redhat.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Raymond Smith <raymond.smith@arm.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Colin Ian King <colin.king@canonical.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mihail Atanassov <Mihail.Atanassov@arm.com> Cc: Lowry Li <Lowry.Li@arm.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: David Riley <davidriley@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST # gpg: using RSA key 732C002572DCAF79 # gpg: Can't check signature: public key not found # Conflicts: # drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c # drivers/gpu/drm/i915/i915_drv.c # drivers/gpu/drm/i915/i915_gem.c # drivers/gpu/drm/i915/i915_gem_gtt.c # drivers/gpu/drm/i915/i915_vma.c From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay
2019-10-05video/logo: do not generate unneeded logo C filesMasahiro Yamada1-19/+2
Currently, all the logo C files are generated irrespective of the CONFIG options. Adding them to extra-y is wrong. What we need to do here is to add them to 'targets' so that if_changed works properly. Files listed in 'targets' are cleaned, so clean-files is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05video/logo: remove unneeded *.o pattern from clean-filesMasahiro Yamada1-1/+1
The pattern *.o is cleaned up globally by the top Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-03Merge drm/drm-next into drm-misc-nextMaxime Ripard24-1711/+205
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-02backlight: lm3630a: Add an enable gpio for the HWEN pinAndreas Kemnade1-0/+9
For now just enable it in the probe function to allow I2C access. Disabling also means resetting the register values to default and according to the datasheet does not give power savings. Tested on Kobo Clara HD. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-02backlight: ipaq_micro: Make structure micro_bl_props constantNishka Dasgupta1-1/+1
Static structure micro_bl_props, having type backlight_properties, is used only once, when it is passed as the last argument to function devm_backlight_device_register(). devm_backlight_device_register() is defined with its last parameter being declared constant. Hence make micro_bl_props itself constant as well. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-02backlight: lm3630a: Fix module aliasesAndreas Kemnade1-1/+3
Devicetree aliases are missing, so that module autoloading does not work properly. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>