summaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2021-10-06video: fbdev: gbefb: Only instantiate device when built for IP32Mark Brown1-1/+1
The gbefb driver not only registers a driver but also the device for that driver. This is all well and good when run on the IP32 machines that are supported by the driver but since the driver supports building with COMPILE_TEST we might also be building on other platforms which do not have this hardware and will crash instantiating the driver. Add an IS_ENABLED() check so we compile out the device registration if we don't have the Kconfig option for the machine enabled. Fixes: 552ccf6b259d290c0c ("video: fbdev: gbefb: add COMPILE_TEST support") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210921212102.30803-1-broonie@kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06fbdev: simplefb: fix Kconfig dependenciesArnd Bergmann1-2/+3
Configurations with both CONFIG_FB_SIMPLE=y and CONFIG_DRM_SIMPLEDRM=m are allowed by Kconfig because the 'depends on !DRM_SIMPLEDRM' dependency does not disallow FB_SIMPLE as long as SIMPLEDRM is not built-in. This can however result in a build failure when cfb_fillrect() etc are then also in loadable modules: x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x1f8): undefined reference to `cfb_fillrect' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x200): undefined reference to `cfb_copyarea' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x208): undefined reference to `cfb_imageblit' To work around this, change FB_SIMPLE to be a 'tristate' symbol, which still allows both to be =m together, but not one of them to be =y if the other one is =m. If a distro kernel picks this configuration, it can be determined by local policy which of the two modules gets loaded. The 'of_chosen' export is needed as this is the first loadable module referencing it. Alternatively, the Kconfig dependency could be changed to 'depends on DRM_SIMPLEDRM=n', which would forbid the configuration with both drivers. Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Acked-by: Rob Herring <robh@kernel.org> # for drivers/of/ Link: https://lore.kernel.org/all/20210721151839.2484245-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Cc: Maxime Ripard <maxime@cerno.tech> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Borislav Petkov <bp@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Peter Collingbourne <pcc@google.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v5.14+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210928145243.1098064-1-arnd@kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-09-18tgafb: clarify dependenciesLinus Torvalds1-1/+3
The TGA boards were based on the DECchip 21030 PCI graphics accelerator used mainly for alpha, and existed in a TURBOchannel (TC) version for the DECstation (MIPS) workstations. However, the config option for the TGA code is a bit confused, and says depends on FB && (ALPHA || TC) because people didn't really want to enable the option for random PCI environments, so the "ALPHA" stands in for that case (while the TC case is then the MIPS DECstation case). So that config dependency is kind of a mixture of architecture and bus choices. But it's incorrect, in that there were non-PCI-based alpha hardware, and then the driver just causes warnings: drivers/video/fbdev/tgafb.c:1532:13: error: ‘tgafb_unregister’ defined but not used [-Werror=unused-function] 1532 | static void tgafb_unregister(struct device *dev) | ^~~~~~~~~~~~~~~~ drivers/video/fbdev/tgafb.c:1387:12: error: ‘tgafb_register’ defined but not used [-Werror=unused-function] 1387 | static int tgafb_register(struct device *dev) | ^~~~~~~~~~~~~~ so let's make the config option dependencies a bit more explict: depends on FB depends on PCI || TC depends on ALPHA || TC where that first "FB" is the software configuration dependency, the second "PCI || TC" is the hardware bus dependency, while that final "ALPHA || TC" dependency is the "don't bother asking except for these situations. We could make that third case have "COMPILE_TEST" as an option, and mark the register/unregister functions as __maybe_unused, but I'm not sure it's really worth it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-10Merge tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+6
Pull drm fixes from Dave Airlie: "Just an initial bunch of fixes for the merge window, amdgpu is most of them with a few ttm fixes and an fbdev avoid multiply overflow fix. core: - Make some dma-buf config options depend on DMA_SHARED_BUFFER - Handle multiplication overflow of fbdev xres/yres in the core ttm: - Fix ttm_bo_move_memcpy() when ttm_resource is subclassed - Fix ttm deadlock if target BO isn't idle - ttm build fix - ttm docs fix dma-buf: - config option fixes fbdev: - limit resolutions to avoid int overflow i915: - stddef change. amdgpu: - Misc cleanups, typo fixes - EEPROM fix - Add some new PCI IDs - Scatter/Gather display support for Yellow Carp - PCIe DPM fix for RKL platforms - RAS fix amdkfd: - SVM fix vc4: - static function fix mgag200: - fix uninit var panfrost: - lock_region fixes" * tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm: (36 commits) drm/ttm: Fix a deadlock if the target BO is not idle during swap fbmem: don't allow too huge resolutions dma-buf: DMABUF_SYSFS_STATS should depend on DMA_SHARED_BUFFER dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFER drm/i915: use linux/stddef.h due to "isystem: trim/fixup stdarg.h and other headers" dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER drm/amdkfd: drop process ref count when xnack disable drm/amdgpu: enable more pm sysfs under SRIOV 1-VF mode drm/amdgpu: fix fdinfo race with process exit drm/amdgpu: Fix a deadlock if previous GEM object allocation fails drm/amdgpu: stop scheduler when calling hw_fini (v2) drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amd/display: Initialize lt_settings on instantiation drm/amd/display: cleanup idents after a revert drm/amd/display: Fix memory leak reported by coverity drm/ttm: Fix ttm_bo_move_memcpy() for subclassed struct ttm_resource drm/amdgpu/swsmu: fix spelling mistake "minimun" -> "minimum" drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform drm/amdgpu: show both cmd id and name when psp cmd failed drm/amd/display: setup system context for APUs ...
2021-09-08fbmem: don't allow too huge resolutionsTetsuo Handa1-0/+6
syzbot is reporting page fault at vga16fb_fillrect() [1], for vga16fb_check_var() is failing to detect multiplication overflow. if (vxres * vyres > maxmem) { vyres = maxmem / vxres; if (vyres < yres) return -ENOMEM; } Since no module would accept too huge resolutions where multiplication overflow happens, let's reject in the common path. Link: https://syzkaller.appspot.com/bug?extid=04168c8063cfdde1db5e [1] Reported-by: syzbot <syzbot+04168c8063cfdde1db5e@syzkaller.appspotmail.com> Debugged-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/185175d6-227a-7b55-433d-b070929b262c@i-love.sakura.ne.jp
2021-09-07Merge tag 'backlight-next-5.15' of ↵Linus Torvalds2-46/+83
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Fix-ups: - Improve bootloader/kernel device handover Bug Fixes: - Stabilise backlight in ktd253 driver" * tag 'backlight-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Improve bootloader/kernel device handover backlight: ktd253: Stabilize backlight
2021-08-19backlight: pwm_bl: Improve bootloader/kernel device handoverDaniel Thompson1-26/+28
Currently there are (at least) two problems in the way pwm_bl starts managing the enable_gpio pin. Both occur when the backlight is initially off and the driver finds the pin not already in output mode and, as a result, unconditionally switches it to output-mode and asserts the signal. Problem 1: This could cause the backlight to flicker since, at this stage in driver initialisation, we have no idea what the PWM and regulator are doing (an unconfigured PWM could easily "rest" at 100% duty cycle). Problem 2: This will cause us not to correctly honour the post_pwm_on_delay (which also risks flickers). Fix this by moving the code to configure the GPIO output mode until after we have examines the handover state. That allows us to initialize enable_gpio to off if the backlight is currently off and on if the backlight is on. Cc: stable@vger.kernel.org Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-07-27video: fbdev: ssd1307fb: Cache address rangesGeert Uytterhoeven1-2/+25
Cache the column and page ranges, to avoid doing unneeded I2C transfers when the values haven't changed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-6-geert@linux-m68k.org
2021-07-27video: fbdev: ssd1307fb: Optimize screen updatesGeert Uytterhoeven1-21/+29
Currently, each screen update triggers an I2C transfer of all screen data, up to 1 KiB of data for a 128x64 display, which takes at least 20 ms in Fast mode. Reduce the amount of transferred data by only updating the rectangle that changed. Remove the calls to ssd1307fb_set_col_range() and ssd1307fb_set_page_range() during initialization, as ssd1307fb_update_rect() now takes care of that. Note that for now the optimized operation is only used for fillrect, copyarea, and imageblit, which are used by fbcon. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-5-geert@linux-m68k.org
2021-07-27video: fbdev: ssd1307fb: Extract ssd1307fb_set_{col,page}_range()Geert Uytterhoeven1-20/+37
Extract the code to set the column and page ranges into two helper functions. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-4-geert@linux-m68k.org
2021-07-27video: fbdev: ssd1307fb: Simplify ssd1307fb_update_display()Geert Uytterhoeven1-7/+10
Simplify the nested loops to handle conversion from linear frame buffer to ssd1307 page layout: 1. Move last page handling one level up, as the value of "m" is the same inside a page, 2. array->data[] is filled linearly, so there is no need to recalculate array_idx over and over again; a simple increment is sufficient. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-3-geert@linux-m68k.org
2021-07-27video: fbdev: ssd1307fb: Propagate errors via ssd1307fb_update_display()Geert Uytterhoeven1-6/+12
Make ssd1307fb_update_display() return an error code, so callers that can handle failures can propagate it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-2-geert@linux-m68k.org
2021-07-27Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst12-49/+299
Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-07-26video: ep93xx: Prepare clock before using itAlexander Sverdlin1-2/+2
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch to Common Clock Framework. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210726140001.24820-5-nikita.shubin@maquefel.me
2021-07-26video: fbdev: riva: Error out if 'pixclock' equals zeroZheyu Ma1-0/+3
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error. Fix this by checking whether 'pixclock' is zero first. The following log reveals it: [ 33.396850] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 33.396864] CPU: 5 PID: 11754 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #222 [ 33.396883] RIP: 0010:riva_load_video_mode+0x417/0xf70 [ 33.396969] Call Trace: [ 33.396973] ? debug_smp_processor_id+0x1c/0x20 [ 33.396984] ? tick_nohz_tick_stopped+0x1a/0x90 [ 33.396996] ? rivafb_copyarea+0x3c0/0x3c0 [ 33.397003] ? wake_up_klogd.part.0+0x99/0xd0 [ 33.397014] ? vprintk_emit+0x110/0x4b0 [ 33.397024] ? vprintk_default+0x26/0x30 [ 33.397033] ? vprintk+0x9c/0x1f0 [ 33.397041] ? printk+0xba/0xed [ 33.397054] ? record_print_text.cold+0x16/0x16 [ 33.397063] ? __kasan_check_read+0x11/0x20 [ 33.397074] ? profile_tick+0xc0/0x100 [ 33.397084] ? __sanitizer_cov_trace_const_cmp4+0x24/0x80 [ 33.397094] ? riva_set_rop_solid+0x2a0/0x2a0 [ 33.397102] rivafb_set_par+0xbe/0x610 [ 33.397111] ? riva_set_rop_solid+0x2a0/0x2a0 [ 33.397119] fb_set_var+0x5bf/0xeb0 [ 33.397127] ? fb_blank+0x1a0/0x1a0 [ 33.397134] ? lock_acquire+0x1ef/0x530 [ 33.397143] ? lock_release+0x810/0x810 [ 33.397151] ? lock_is_held_type+0x100/0x140 [ 33.397159] ? ___might_sleep+0x1ee/0x2d0 [ 33.397170] ? __mutex_lock+0x620/0x1190 [ 33.397180] ? trace_hardirqs_on+0x6a/0x1c0 [ 33.397190] do_fb_ioctl+0x31e/0x700 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-4-git-send-email-zheyuma97@gmail.com
2021-07-26video: fbdev: kyro: Error out if 'pixclock' equals zeroZheyu Ma1-0/+3
The userspace program could pass any values to the driver through ioctl() interface. if the driver doesn't check the value of 'pixclock', it may cause divide error because the value of 'lineclock' and 'frameclock' will be zero. Fix this by checking whether 'pixclock' is zero in kyrofb_check_var(). The following log reveals it: [ 103.073930] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 103.073942] CPU: 4 PID: 12483 Comm: syz-executor Not tainted 5.14.0-rc2-00478-g2734d6c1b1a0-dirty #118 [ 103.073959] RIP: 0010:kyrofb_set_par+0x316/0xc80 [ 103.074045] Call Trace: [ 103.074048] ? ___might_sleep+0x1ee/0x2d0 [ 103.074060] ? kyrofb_ioctl+0x330/0x330 [ 103.074069] fb_set_var+0x5bf/0xeb0 [ 103.074078] ? fb_blank+0x1a0/0x1a0 [ 103.074085] ? lock_acquire+0x3bd/0x530 [ 103.074094] ? lock_release+0x810/0x810 [ 103.074103] ? ___might_sleep+0x1ee/0x2d0 [ 103.074114] ? __mutex_lock+0x620/0x1190 [ 103.074126] ? trace_hardirqs_on+0x6a/0x1c0 [ 103.074137] do_fb_ioctl+0x31e/0x700 [ 103.074144] ? fb_getput_cmap+0x280/0x280 [ 103.074152] ? rcu_read_lock_sched_held+0x11/0x80 [ 103.074162] ? rcu_read_lock_sched_held+0x11/0x80 [ 103.074171] ? __sanitizer_cov_trace_switch+0x67/0xf0 [ 103.074181] ? __sanitizer_cov_trace_const_cmp2+0x20/0x80 [ 103.074191] ? do_vfs_ioctl+0x14b/0x16c0 [ 103.074199] ? vfs_fileattr_set+0xb60/0xb60 [ 103.074207] ? rcu_read_lock_sched_held+0x11/0x80 [ 103.074216] ? lock_release+0x483/0x810 [ 103.074224] ? __fget_files+0x217/0x3d0 [ 103.074234] ? __fget_files+0x239/0x3d0 [ 103.074243] ? do_fb_ioctl+0x700/0x700 [ 103.074250] fb_ioctl+0xe6/0x130 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-3-git-send-email-zheyuma97@gmail.com
2021-07-26video: fbdev: asiliantfb: Error out if 'pixclock' equals zeroZheyu Ma1-0/+3
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error. Fix this by checking whether 'pixclock' is zero first. The following log reveals it: [ 43.861711] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 43.861737] CPU: 2 PID: 11764 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #224 [ 43.861756] RIP: 0010:asiliantfb_check_var+0x4e/0x730 [ 43.861843] Call Trace: [ 43.861848] ? asiliantfb_remove+0x190/0x190 [ 43.861858] fb_set_var+0x2e4/0xeb0 [ 43.861866] ? fb_blank+0x1a0/0x1a0 [ 43.861873] ? lock_acquire+0x1ef/0x530 [ 43.861884] ? lock_release+0x810/0x810 [ 43.861892] ? lock_is_held_type+0x100/0x140 [ 43.861903] ? ___might_sleep+0x1ee/0x2d0 [ 43.861914] ? __mutex_lock+0x620/0x1190 [ 43.861921] ? do_fb_ioctl+0x313/0x700 [ 43.861929] ? mutex_lock_io_nested+0xfa0/0xfa0 [ 43.861936] ? __this_cpu_preempt_check+0x1d/0x30 [ 43.861944] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 43.861952] ? lockdep_hardirqs_on+0x59/0x100 [ 43.861959] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 43.861967] ? trace_hardirqs_on+0x6a/0x1c0 [ 43.861978] do_fb_ioctl+0x31e/0x700 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-2-git-send-email-zheyuma97@gmail.com
2021-07-23Merge tag 'drm-misc-next-2021-07-22' of ↵Dave Airlie4-5/+10
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15-rc1: UAPI Changes: - Remove sysfs stats for dma-buf attachments, as it causes a performance regression. Previous merge is not in a rc kernel yet, so no userspace regression possible. Cross-subsystem Changes: - Sanitize user input in kyro's viewport ioctl. - Use refcount_t in fb_info->count - Assorted fixes to dma-buf. - Extend x86 efifb handling to all archs. - Fix neofb divide by 0. - Document corpro,gm7123 bridge dt bindings. Core Changes: - Slightly rework drm master handling. - Cleanup vgaarb handling. - Assorted fixes. Driver Changes: - Add support for ws2401 panel. - Assorted fixes to stm, ast, bochs. - Demidlayer ingenic irq. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
2021-07-21backlight: ktd253: Stabilize backlightLinus Walleij1-20/+55
Remove interrupt disablement during backlight setting. It is way to dangerous and makes platforms instable by having it miss vblank IRQs leading to the graphics derailing. The code is using ndelay() which is not available on platforms such as ARM and will result in 32 * udelay(1) which is substantial. Add some code to detect if an interrupt occurs during the tight loop and in that case just redo it from the top. Fixes: 5317f37e48b9 ("backlight: Add Kinetic KTD253 backlight driver") Cc: Stephan Gerhold <stephan@gerhold.net> Reported-by: newbyte@disroot.org Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-07-21video: fbdev: neofb: add a check against divide errorZheyu Ma1-1/+1
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error because of the 'PICOS2KHZ' macro. Fix this by checking whether 'pixclock' is zero first. The following log reveals it: [ 53.093806] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.093838] CPU: 3 PID: 11763 Comm: hang Not tainted 5.14.0-rc2-00478-g2734d6c1b1a0 #215 [ 53.093859] RIP: 0010:neofb_check_var+0x80/0xe50 [ 53.093951] Call Trace: [ 53.093956] ? neofb_setcolreg+0x2b0/0x2b0 [ 53.093968] fb_set_var+0x2e4/0xeb0 [ 53.093977] ? fb_blank+0x1a0/0x1a0 [ 53.093984] ? lock_acquire+0x1ef/0x530 [ 53.093996] ? lock_release+0x810/0x810 [ 53.094005] ? lock_is_held_type+0x100/0x140 [ 53.094016] ? ___might_sleep+0x1ee/0x2d0 [ 53.094028] ? __mutex_lock+0x620/0x1190 [ 53.094036] ? do_fb_ioctl+0x313/0x700 [ 53.094044] ? mutex_lock_io_nested+0xfa0/0xfa0 [ 53.094051] ? __this_cpu_preempt_check+0x1d/0x30 [ 53.094060] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 53.094069] ? lockdep_hardirqs_on+0x59/0x100 [ 53.094076] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 53.094085] ? trace_hardirqs_on+0x6a/0x1c0 [ 53.094096] do_fb_ioctl+0x31e/0x700 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1626871424-27708-1-git-send-email-zheyuma97@gmail.com
2021-07-21video: fbdev: arcfb: remove redundant initialization of variable errColin Ian King1-1/+1
The variable err is being initialized with a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210721102608.42694-1-colin.king@canonical.com
2021-07-21Merge tag 'drm-misc-next-2021-07-16' of ↵Dave Airlie1-3/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling. Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes. Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
2021-07-19fbmem: Convert from atomic_t to refcount_t on fb_info->countXiyu Yang1-3/+3
refcount_t type and corresponding API can protect refcounters from accidental underflow and overflow and further use-after-free situations. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1626674392-55857-1-git-send-email-xiyuyang19@fudan.edu.cn
2021-07-19video: fbdev: kyro: fix a DoS bug by restricting user inputZheyu Ma1-0/+5
The user can pass in any value to the driver through the 'ioctl' interface. The driver dost not check, which may cause DoS bugs. The following log reveals it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:SetOverlayViewPort+0x133/0x5f0 drivers/video/fbdev/kyro/STG4000OverlayDevice.c:476 Call Trace: kyro_dev_overlay_viewport_set drivers/video/fbdev/kyro/fbdev.c:378 [inline] kyrofb_ioctl+0x2eb/0x330 drivers/video/fbdev/kyro/fbdev.c:603 do_fb_ioctl+0x1f3/0x700 drivers/video/fbdev/core/fbmem.c:1171 fb_ioctl+0xeb/0x130 drivers/video/fbdev/core/fbmem.c:1185 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19b/0x220 fs/ioctl.c:739 do_syscall_64+0x32/0x80 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1626235762-2590-1-git-send-email-zheyuma97@gmail.com
2021-07-16Merge tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-7/+5
Pull drm fixes from Dave Airlie: "Regular rc2 fixes though a bit more than usual at rc2 stage, people must have been testing early or else some fixes from last week got a bit laggy. There is one larger change in the amd fixes to amalgamate some power management code on the newer chips with the code from the older chips, it should only affects chips where support was introduced in rc1 and it should make future fixes easier to maintain probably a good idea to merge it now. Otherwise it's mostly fixes across the board. dma-buf: - Fix fence leak in sync_file_merge() error code drm/panel: - nt35510: Don't fail on DSI reads fbdev: - Avoid use-after-free by not deleting current video mode ttm: - Avoid NULL-ptr deref in ttm_range_man_fini() vmwgfx: - Fix a merge commit qxl: - fix a TTM regression amdgpu: - SR-IOV fixes - RAS fixes - eDP fixes - SMU13 code unification to facilitate fixes in the future - Add new renoir DID - Yellow Carp fixes - Beige Goby fixes - Revert a bunch of TLB fixes that caused regressions - Revert an LTTPR display regression amdkfd - Fix VRAM access regression - SVM fixes i915: - Fix -EDEADLK handling regression - Drop the page table optimisation" * tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/amdgpu: add another Renoir DID drm/ttm: add a check against null pointer dereference drm/i915/gtt: drop the page table optimisation drm/i915/gt: Fix -EDEADLK handling regression drm/amd/pm: Add waiting for response of mode-reset message for yellow carp Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping" Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update" Revert "drm/amdkfd: Make TLB flush conditional on mapping" Revert "drm/amdgpu: Fix warning of Function parameter or member not described" Revert "drm/amdkfd: Add memory sync before TLB flush on unmap" drm/amd/pm: Fix BACO state setting for Beige_Goby drm/amdgpu: Restore msix after FLR drm/amdkfd: Allow CPU access for all VRAM BOs drm/amdgpu/display - only update eDP's backlight level when necessary drm/amdkfd: handle fault counters on invalid address drm/amdgpu: Correct the irq numbers for virtual crtc drm/amd/display: update header file name drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carp drm/amd/display: remove faulty assert Revert "drm/amd/display: Always write repeater mode regardless of LTTPR" ...
2021-07-13video: fbdev: Fix fall-through warning for ClangGustavo A. R. Silva1-0/+2
Fix the following fallthrough warning (arm64-randconfig with Clang): drivers/video/fbdev/xilinxfb.c:244:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-13fbmem: Do not delete the mode that is still in useZhen Lei1-7/+5
The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178ccd6d ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com
2021-07-09Merge tag 'for-linus-5.14-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - Support for optimized routines based on the host CPU - Support for PCI via virtio - Various fixes * tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: remove unneeded semicolon in um_arch.c um: Remove the repeated declaration um: fix error return code in winch_tramp() um: fix error return code in slip_open() um: Fix stack pointer alignment um: implement flush_cache_vmap/flush_cache_vunmap um: add a UML specific futex implementation um: enable the use of optimized xor routines in UML um: Add support for host CPU flags and alignment um: allow not setting extra rpaths in the linux binary um: virtio/pci: enable suspend/resume um: add PCI over virtio emulation driver um: irqs: allow invoking time-travel handler multiple times um: time-travel/signals: fix ndelay() in interrupt um: expose time-travel mode to userspace side um: export signals_enabled directly um: remove unused smp_sigio_handler() declaration lib: add iomem emulation (logic_iomem) um: allow disabling NO_IOMEM
2021-07-05Merge tag 'char-misc-5.14-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...
2021-07-05Merge tag 'backlight-next-5.14' of ↵Linus Torvalds5-39/+250
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Drivers: - Add support for Richtek RT4831 Backlight New Device Support: - Add support for Qualcomm PMI8994 WLED Backlight Fix-ups: - Device Tree adaptions to richtek,rt4831-backlight - Trivial spelling, whitespace, etc in Kconfig - Use Atomic PWM API in lm3630a_bl Bug Fixes: - Fix Firmware Node Leak in error path in lm3630a_bl - Fix erroneous return codes in lm3630a_bl" * tag 'backlight-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lm3630a: Convert to atomic PWM API and check for errors backlight: lm3630a: Fix return code of .update_status() callback backlight: Kconfig whitespace and indentation cleanups video: backlight: qcom-wled: Add PMI8994 compatible backlight: rt4831: Adds support for Richtek RT4831 backlight backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight backlight: lm3630a_bl: Put fwnode in error case during ->probe()
2021-07-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+1
Merge more updates from Andrew Morton: "190 patches. Subsystems affected by this patch series: mm (hugetlb, userfaultfd, vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock, migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap, zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc, core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs, signals, exec, kcov, selftests, compress/decompress, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) ipc/util.c: use binary search for max_idx ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock ipc: use kmalloc for msg_queue and shmid_kernel ipc sem: use kvmalloc for sem_undo allocation lib/decompressors: remove set but not used variabled 'level' selftests/vm/pkeys: exercise x86 XSAVE init state selftests/vm/pkeys: refill shadow register after implicit kernel write selftests/vm/pkeys: handle negative sys_pkey_alloc() return code selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random kcov: add __no_sanitize_coverage to fix noinstr for all architectures exec: remove checks in __register_bimfmt() x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned hfsplus: report create_date to kstat.btime hfsplus: remove unnecessary oom message nilfs2: remove redundant continue statement in a while-loop kprobes: remove duplicated strong free_insn_page in x86 and s390 init: print out unknown kernel parameters checkpatch: do not complain about positive return values starting with EPOLL checkpatch: improve the indented label test checkpatch: scripts/spdxcheck.py now requires python3 ...
2021-07-01kernel.h: split out panic and oops helpersAndy Shevchenko1-0/+1
kernel.h is being used as a dump for all kinds of stuff for a long time. Here is the attempt to start cleaning it up by splitting out panic and oops helpers. There are several purposes of doing this: - dropping dependency in bug.h - dropping a loop by moving out panic_notifier.h - unload kernel.h from something which has its own domain At the same time convert users tree-wide to use new headers, although for the time being include new header back to kernel.h to avoid twisted indirected includes for existing users. [akpm@linux-foundation.org: thread_info.h needs limits.h] [andriy.shevchenko@linux.intel.com: ia64 fix] Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-23Backmerge tag 'v5.13-rc7' into drm-nextDave Airlie3-1/+40
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply, and to bake in the conflicts so far.
2021-06-22backlight: lm3630a: Convert to atomic PWM API and check for errorsUwe Kleine-König1-23/+19
The practical upside here is that this only needs a single API call to program the hardware which (depending on the underlaying hardware) can be more effective and prevents glitches. Up to now the return value of the pwm functions was ignored. Fix this and propagate the error to the caller. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-22backlight: lm3630a: Fix return code of .update_status() callbackUwe Kleine-König1-6/+6
According to <linux/backlight.h> .update_status() is supposed to return 0 on success and a negative error code otherwise. Adapt lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to actually do it. While touching that also add the error code to the failure message. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-17um: allow disabling NO_IOMEMJohannes Berg1-1/+1
Adjust the kconfig a little to allow disabling NO_IOMEM in UML. To make an "allyesconfig" with CONFIG_NO_IOMEM=n build, adjust a few Kconfig things elsewhere and add dummy asm/fb.h and asm/vga.h files. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-06-17fbdev/omap2: use DEFINE_SPINLOCK() instead of spin_lock_init().Jiahua Yu1-3/+1
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Jiahua Yu <yujiahua1@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210616031713.24959-1-yujiahua1@huawei.com
2021-06-14Merge tag 'v5.13-rc6' into char-misc-nextGreg Kroah-Hartman2-0/+39
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03video: fbdev: mb862xx: use DEVICE_ATTR_RO macroZhen Lei1-3/+3
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210601090852.10531-1-thunder.leizhen@huawei.com
2021-06-03video: fbdev: atyfb: mach64_cursor.c: deleted the repeated wordlijian1-1/+1
deleted the repeated word 'be' in the comments. Signed-off-by: lijian <lijian@yulong.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210601012747.38884-1-lijian_8010a29@163.com
2021-06-01Revert "fb_defio: Remove custom address_space_operations"Matthew Wilcox2-0/+39
Commit ccf953d8f3d6 makes framebuffers which use deferred I/O stop displaying updates after the first one. This is because the pages handled by fb_defio no longer have a page_mapping(). That prevents page_mkclean() from marking the PTEs as clean, and so writes are only noticed the first time. Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YLZEhv0cpZp8uVE3@casper.infradead.org
2021-06-01backlight: Kconfig whitespace and indentation cleanupsJuerg Haefliger1-11/+11
Remove leading whitespaces, replace multi spaces with tabs, and fix help text indentation. Signed-off-by: Juerg Haefliger <juergh@canonical.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-31Merge 5.13-rc4 into char-misc-nextGreg Kroah-Hartman1-1/+1
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27video: backlight: qcom-wled: Add PMI8994 compatibleKonrad Dybcio1-0/+1
Add a compatible for PMI8994 WLED. It uses the V4 of WLED IP. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-27Merge drm/drm-next into drm-misc-nextMaxime Ripard2-17/+30
i915 is broken without -rc3, let's bring that tag in to fix it. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-05-27Merge v5.13-rc3 into drm-nextDaniel Vetter2-17/+30
drm/i915 is extremely on fire without the below revert from -rc3: commit 293837b9ac8d3021657f44c9d7a14948ec01c5d0 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Wed May 19 05:55:57 2021 -1000 Revert "i915: fix remap_io_sg to verify the pgprot" Backmerge so we don't have a too wide bisect window for anything that's a more involved workload than booting the driver. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-05-26fbdev: matrox: use modern module_init()Arnd Bergmann1-3/+2
This is one of the last drivers with a global init_module() function instead of the modern module_init() annotation. Convert it over. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210514213316.635070-1-arnd@kernel.org
2021-05-21video: hgafb: correctly handle card detect failure during probeAnirudh Rayabharam1-1/+1
The return value of hga_card_detect() is not properly handled causing the probe to succeed even though hga_card_detect() failed. Since probe succeeds, hgafb_open() can be called which will end up operating on an unmapped hga_vram. This results in an out-of-bounds access as reported by kernel test robot [1]. To fix this, correctly detect failure of hga_card_detect() by checking for a non-zero error code. [1]: https://lore.kernel.org/lkml/20210516150019.GB25903@xsang-OptiPlex-9020/ Fixes: dc13cac4862c ("video: hgafb: fix potential NULL pointer dereference") Cc: stable <stable@vger.kernel.org> Reported-by: kernel test robot <oliver.sang@intel.com> Reviewed-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com> Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210516192714.25823-1-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21Merge 50f09a3dd587 ("Merge tag 'char-misc-5.13-rc3' of ↵Greg Kroah-Hartman4-42/+63
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc") into char-misc-next We want the char/misc driver fixes in here as well Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-20Merge tag 'char-misc-5.13-rc3' of ↵Linus Torvalds2-17/+30
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here is a big set of char/misc/other driver fixes for 5.13-rc3. The majority here is the fallout of the umn.edu re-review of all prior submissions. That resulted in a bunch of reverts along with the "correct" changes made, such that there is no regression of any of the potential fixes that were made by those individuals. I would like to thank the over 80 different developers who helped with the review and fixes for this mess. Other than that, there's a few habanna driver fixes for reported issues, and some dyndbg fixes for reported problems. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits) misc: eeprom: at24: check suspend status before disable regulator uio_hv_generic: Fix another memory leak in error handling paths uio_hv_generic: Fix a memory leak in error handling paths uio/uio_pci_generic: fix return value changed in refactoring Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference"" dyndbg: drop uninformative vpr_info dyndbg: avoid calling dyndbg_emit_prefix when it has no work binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION cdrom: gdrom: initialize global variable at init time brcmfmac: properly check for bus register errors Revert "brcmfmac: add a check for the status of usb_register" video: imsttfb: check for ioremap() failures Revert "video: imsttfb: fix potential NULL pointer dereferences" net: liquidio: Add missing null pointer checks Revert "net: liquidio: fix a NULL pointer dereference" media: gspca: properly check for errors in po1030_probe() Revert "media: gspca: Check the return value of write_bridge for timeout" media: gspca: mt9m111: Check write_bridge for timeout Revert "media: gspca: mt9m111: Check write_bridge for timeout" media: dvb: Add check on sp8870_readreg return ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 10:15:36 +0000