summaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2011-01-10OMAP: DSS2: Represent DISPC register defines with channel as parameterSumit Semwal1-88/+82
On OMAP4, we have a new DISPC channel for Overlay Manager LCD2. There is a set of regsiters for LCD2 channel similar to the existing LCD channel, like DISPC_CONTROL2, DISPC_DIVISOR2, DISPC_CONFIG2 and so on. Introduce new enum members for LCD2 Channel and corresponding Overlay Manager in display.h. Represent the following DISPC register defines with channel as a parameter to differentiate between LCD and LCD2 registers (and also DIGIT in some cases): DISPC_DEFAULT_COLOR, DISPC_TRANS_COLOR, DISPC_TIMING_H, DISPC_TIMING_V, DISPC_POL_FREQ, DISPC_DIVISOR, DISPC_SIZE_LCD, DISPC_DATA_CYCLEk, DISPC_CPR_COEF_R, DISPC_CPR_COEF_G and DISPC_CPR_COEF_B This parametrization helps in reducing the number of register defines for DISPC. Replace the existing reads/writes to these registers in this new way. Also, Introduce defines for registers DISPC_CONTROL2 and DISPC_CONFIG2 which are used exclusively for LCD2 channel. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add dss_features for omap4 and overlay manager related featuresArchit Taneja2-3/+47
Initialize a dss_features struct for omap4. Add support for LCD2 manager by introducing a new member in dss_feat_id. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Clean up DISPC color mode validation checksArchit Taneja3-48/+14
The supported set of color modes varies for different DISPC pipelines(plane) and omap version. This makes the checks for validation of a color mode more complicated as new omap versions are added. A dss_feature function is created which tells if a color_mode is supported for a plane on the current omap revision. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add back authors of panel-generic.c based driversBryan Wu1-0/+10
Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: remove generic DPI panel driver duplicated panel driversBryan Wu5-524/+0
Still keep sharp_ls_panel driver, because it contains blacklight control driver. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add generic DPI panel display driverBryan Wu3-0/+364
Generic DPI panel driver includes the driver and 4 similar panel configurations. It will match the panel name which is passed from platform data and setup the right configurations. With generic DPI panel driver, we can remove those 4 duplicated panel display drivers. In the future, it is simple for us just add new panel configuration date in panel-generic-dpi.c to support new display panel. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: OMAPFB: Add null pointer checkSamreen1-2/+3
A null pointer check added. And using kstrdup() instead of kmalloc() & strcpy() Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add NEC NL8048HL11-01B display panelErik Gilling3-0/+333
NEC WVGA LCD NL8048HL11-01B panel support has been added. This panel is being used in zoom2/zoom3/3630 sdp boards. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> CC: Subbu Venkatesh <subramani.venkatesh@windriver.com> CC: Erik Gilling <konkers@android.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3630: DSS2: Enable Pre-Multiplied Alpha SupportRajkumar N4-9/+70
Enable dss to process color formats with pre-mulitplied alpha. With this we can have alpha values defined for each pixel and hence can have different blending values for each pixel. sysfs entry has been created for this and pre-multiplied alpha support is turned off by default. Signed-off-by: Sudeep Basavaraj <sudeep.basavaraj@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3: DSS2: Split OMAP3 has feature for 3430 & 3630Samreen2-3/+18
Splitting the OMAP3 dss has feature separately for omap3430 & omap3630 Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Fix: Read correct bit in dispc_enable_alpha_blending()Archit Taneja1-2/+1
Read correct DISPC_CONFIG bit when the channel is DIGIT, remove extra line at the end of the function. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-06Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds4-0/+821
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits) ARM: DMA: add support for DMA debugging ARM: PL011: add DMA burst threshold support for ST variants ARM: PL011: Add support for transmit DMA ARM: PL011: Ensure IRQs are disabled in UART interrupt handler ARM: PL011: Separate hardware FIFO size from TTY FIFO size ARM: PL011: Allow better handling of vendor data ARM: PL011: Ensure error flags are clear at startup ARM: PL011: include revision number in boot-time port printk ARM: vexpress: add sched_clock() for Versatile Express ARM i.MX53: Make MX53 EVK bootable ARM i.MX53: Some bug fix about MX53 MSL code ARM: 6607/1: sa1100: Update platform device registration ARM: 6606/1: sa1100: Fix platform device registration ARM i.MX51: rename IPU irqs ARM i.MX51: Add ipu clock support ARM: imx/mx27_3ds: Add PMIC support ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn() mx51: fix usb clock support MX51: Add support for usb host 2 arch/arm/plat-mxc/ehci.c: fix errors/typos ...
2011-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6Linus Torvalds1-22/+5
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (25 commits) atyfb: Fix bootup hangs on sparc64. sparc: update copyright in piggyback.c sparc: unify strip command in boot/Makefile sparc: rename piggyback_32 to piggyback sparc: fix tftpboot.img for sparc64 on little-endian host sparc: add $BITS to piggyback arguments sparc: remove obsolete ELF support in piggyback_32.c sparc: additional comments to piggyback_32.c sparc: use _start for the start entry (like 64 bit does) sparc: use trapbase in setup_arch sparc: refactor piggy_32.c Added support for ampopts in APBUART driver. Used in AMP systems. APBUART: added raw AMBA vendor/device number to match against. SPARC/LEON: avoid AMBAPP name duplicates in openprom fs when REG is missing SPARC/LEON: added support for selecting Timer Core and Timer within core LEON: added raw AMBA vendor/device number to find TIMER, IRQCTRL SPARC/LEON: added support for IRQAMP IRQ Controller SPARC/LEON: find IRQCTRL and Timer via OF-Tree, instead of hardcoded. sparc: fix sparse warnings in arch/sparc/prom for 32 bit build sparc: remove unused prom tree functions ...
2011-01-06Merge branch 'devel-stable' into develRussell King4-0/+821
Conflicts: arch/arm/mach-pxa/clock.c arch/arm/mach-pxa/clock.h
2011-01-06atyfb: Fix bootup hangs on sparc64.David S. Miller1-22/+5
After commit 25edd6946a1d74e5e77813c2324a0908c68bcf9e ("sparc64: Get rid of indirect p1275 PROM call buffer.") we can't pass virtual addresses >4GB to PROM calls. Largely this is never necessary in drivers because we have a copy of the entire PROM device tree in the kernel and a set of of_*() interfaces to access it. Unfortunately there were some lingering prom calls in the atyfb driver, in particular prom_finddevice() was being called with an on-stack address which could be anywhere. This code is actually probing for information we already have, the PROM choosen console output device is stored in of_console_device so all of this nasty code consolidates into a one-line comparison. Next we have some prom_getintdefault() calls which are trivially transformed into the equivalent of_getintprop_default(). Special thanks to Fabio, who figured out exactly where the bootup was hanging. That made this bug trivial to fix. Reported-by: Fabio M. Di NItto <fabbione@fabbione.net> Reported-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Frans van Berckel <fberckel@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Fabio M. Di NItto <fabbione@fabbione.net>
2011-01-06Merge branch 'master' of ↵Paul Mundt4-5/+18
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/video/sh_mobile_lcdcfb.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06Merge branch 'fbdev/udlfb'Paul Mundt3-0/+1894
2011-01-06video: udlfb: Kill off special printk wrappers, use pr_fmt().Paul Mundt1-37/+39
This kills off all of the dl_xxx() printk wrappers and simply stubs in a pr_fmt() definition to accomplish the same thing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: udlfb: Kill off some magic constants for EDID sizing.Paul Mundt1-8/+7
The edid length is fixed, so use the standard definition consistently. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: udlfb: deifdefify (yes, that's a word).Paul Mundt1-39/+2
udlfb selects all of the options it presently ifdef conditionalizes, so none of the statements have any effect outside of aggravating eye strain. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06fbdev: modedb: Add a new mode for 864x480 TAAL panels.Mayuresh Janorkar1-0/+4
This adds a new entry to the modedb for 864x480 TAAL panels, the default configuration for many OMAP boards. This enables omapfb to make use of the standard mode parsing. Signed-off-by: Mayuresh Janorkar <mayur@ti.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06drivers/video/i810/i810-i2c.c: fix i2c bus handlingStefani Seibold1-4/+8
These patch fix a longstanding bug in the i810 frame buffer driver. The handling of the i2c bus is wrong: A 1 bit should not written to the i2c, these will be done by switch the i2c to input. Driving an 1 bit active is against the i2c spec. An active driven of a 1 bit will result in very strange error, depending which side is the more powerful one. In my case it depends on the temperature of the Display-Controller-EEprom: With an cold eprom a got the correct EDID datas, with a warm one some of the 1 bits was 0 :-( The same bug is also in the intelfb driver in the file drivers/video/intelfb/intelfb_i2c.c. The functions intelfb_gpio_setscl() and intelfb_gpio_setsda() do drive the 1 bit active to the i2c bus. But since i have no card which is used by the intelfb driver i cannot fix it. Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: Fix the HGA framebuffer driverBrent Cook2-25/+11
Resurrected some old hardware and fixed up the hgafb driver to work again. Only tested with fbcon, since most fbdev-based software appears to only support 12bpp and up. It does not appear that this driver has worked for at least the entire 2.6.x series, perhaps since 2002. Hercules graphics hardware uses packed pixels horizontally, but rows are not linear. In other words, the pixels are not packed vertically. This means that custom imageblit, fillrect and copyarea need to be written specific to the hardware. * Removed the experimental acceleration option, since it is required for the hardware to work. * Fixed imageblit to work with fb_image's wider than 8 pixels. * Updated configuration text (HGA hardware is from 1984) Signed-off-by: Brent Cook <busterb@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06drivers/video/carminefb.c: improve error handlingJulia Lawall1-4/+2
This code had an error handling goto to the wrong place, a misplaced release_mem_region, and a duplicated release_mem_region. The semantic match that finds the double release_mem_region is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression e1,e2,e3; position p1,p2,p3; @@ release_mem_region@p1(e1, e2)@p3; ... when != request_mem_region(e1,e2,e3) release_mem_region(e1, e2)@p2; @@ expression e <= r.e1,e3; expression r.e1,e2; position r.p1,r.p2,r.p3,p!=r.p1; @@ *release_mem_region(e1, e2)@p3; ... when != e = e3 *release_mem_region@p(e1, e2)@p2;// </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06video: imxfb: Fix the maximum value for yresFabio Estevam1-6/+3
MX27 and MX25 have 10 bits in the YMAX field of LCDC Size Register. Fix the maximum value for yres. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06fbdev: sh_mobile_lcdcfb: Enable 32 bpp and 24 bpp supportMagnus Damm1-11/+63
This patch extends the LCDC driver with 24 bpp and 32 bpp support. These modes have been kept disabled earlier due to dependencies between the potential two LCDC channels that are exported as two separate framebuffer devices. The dependency boils down to a byte swap register that is shared between multiple channels. With this patch applied all single channel LCDC hardware can chose freely from 16, 24 and 32 bpp. Dual channel LCDC must stick to the same setup for both channels. Without this patch only 16 bpp is fully supported. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-05Merge branch 'common/fbdev-mipi' of ↵Paul Mundt1-8/+28
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
2011-01-05fbdev: sh_mipi_dsi: use platform provided register layout and valuesGuennadi Liakhovetski1-5/+11
Different sh-mobile SoCs have variations in their MIPI DSI register layouts, besides, different LCD panels require different configuration parameters. This patch switches the driver to use platform-provided MIPI DSI parameters. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-05fbdev: sh-mobile: implement MIPI DSI runtime PM supportGuennadi Liakhovetski1-3/+17
On SH-Mobile platforms using runtime PM with the MIPI DSI driver switches the DSI Tx link clock on PM events. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-27Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds4-29/+28
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: fbdev: sh_mobile_lcdc: increase maximum framebuffer size to support 1080p video: imxfb: Fix the maximum value for yres fb: fix overlapping test off-by-one. fbdev: sh-mobile: retrieve and propagate display sizes from EDID fbdev: sh-mobile: restore display size configuration
2010-12-27fbdev: sh_mobile_lcdc: increase maximum framebuffer size to support 1080pGuennadi Liakhovetski1-18/+8
LCDC hardware can support 1920x1080 formats, adjust the driver to cover them. Besides, instead of guessing some "reasonable" validity checks, only verify values in .fb_check_var(), that we are sure, we cannot support. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-27video: imxfb: Fix the maximum value for yresFabio Estevam1-6/+3
MX27 and MX25 have 10 bits in the YMAX field of LCDC Size Register. Fix the maximum value for yres. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-24fb: fix overlapping test off-by-one.Dave Airlie1-1/+1
On my system with a radeon x2, the first GPU was not overlapping vesa but the test decided it was. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22backlight: cr_bllcd.c: fix a memory leakAxel Lin1-0/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Thomas Hellstrom <thomas@tungstengraphics.com> Cc: Alan Hourihane <alanh@tungstengraphics.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22fbdev: sh-mobile: retrieve and propagate display sizes from EDIDGuennadi Liakhovetski1-3/+13
Monitor EDID contains information about physical display sizes. Retrieve it and propagate to the framebuffer driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22fbdev: sh-mobile: restore display size configurationGuennadi Liakhovetski1-1/+3
An earlier patch replaced open-coded video-mode configuration from platform data by a call to fb_videomode_to_var(), thereby setting ofdisplay sizes have been accidentally lost. Restore them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: eliminate compiler warningsAaro Koskinen2-3/+3
Convert some bit masks to 8-bit values to avoid the following compiler warnings: drivers/video/sis/sis_main.c:3858: warning: large integer implicitly truncated to unsigned type drivers/video/sis/init301.c:5855: warning: large integer implicitly truncated to unsigned type drivers/video/sis/init301.c:5869: warning: large integer implicitly truncated to unsigned type Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: delete unused register I/O macrosAaro Koskinen1-53/+1
Delete unused register I/O macros. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace setSISIDXREG with SiS_SetRegANDORAaro Koskinen1-47/+47
Replace setSISIDXREG() with SiS_SetRegANDOR(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace andSISIDXREG with SiS_SetRegANDAaro Koskinen1-33/+33
Replace andSISIDXREG() with SiS_SetRegAND(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace orSISIDXREG with SiS_SetRegORAaro Koskinen1-36/+36
Replace orSISIDXREG() with SiS_SetRegOR(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace outSISIDXREG with SiS_SetRegAaro Koskinen1-315/+315
Replace outSISIDXREG() with SiS_SetReg(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace inSISIDXREG with SiS_GetRegAaro Koskinen1-128/+128
Replace inSISIDXREG() with SiS_GetReg(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace outSISREG with SiS_SetRegByteAaro Koskinen1-10/+10
Replace outSISREG() with SiS_SetRegByte(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: replace inSISREG with SiS_GetRegByteAaro Koskinen1-9/+9
Replace inSISREG() with SiS_GetRegByte(). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: change register I/O functions to use fixed size typesAaro Koskinen2-32/+32
Use fixed-sized types (u8, u16, u32) instead of plain C types. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: remove duplicate function declarationsAaro Koskinen3-25/+14
Remove duplicate register I/O function declarations by moving them into a common header file. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: delete HAVE_CONFIG_H checksAaro Koskinen2-8/+0
Delete unneeded HAVE_CONFIG_H checks. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22sisfb: eliminate unused variable compiler warningAaro Koskinen1-14/+16
Eliminate the following compiler warning on non-x86 platforms by limiting the variable scope: drivers/video/sis/sis_main.c:4108: warning: unused variable 'temp' Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22Merge branch 'master' of ↵Paul Mundt20-1296/+296
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 12:28:49 +0000