summaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2013-08-10panel-acx565akm: add detection method for omapdrmSebastian Reichel1-0/+10
2013-08-09Merge tag 'fbdev-fixes-3.11-rc5' of ↵Linus Torvalds2-28/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - omapdss: compilation fix and DVI fix for PandaBoard - mxsfb: fix colors when using 18bit LCD bus * tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: ARM: OMAP: dss-common: fix Panda's DVI DDC channel video: mxsfb: fix color settings for 18bit data bus and 32bpp OMAPDSS: analog-tv-connector: compile fix
2013-08-02video: mxsfb: fix color settings for 18bit data bus and 32bppHector Palacios1-26/+0
For a combination of 18bit LCD data bus width and a color mode of 32bpp, the driver was setting the color mapping to rgb666, which is wrong, as the color in memory realy has an rgb888 layout. This patch also removes the setting of flag CTRL_DF24 that makes the driver dimiss the upper 2 bits when handling 32/24bpp colors in a diplay with 18bit data bus width. This flag made true color images display wrong in such configurations. Finally, the color mapping rgb666 has also been removed as nobody is using it and high level applications like Qt5 cannot work with it either. Reference: https://lkml.org/lkml/2013/5/23/220 Signed-off-by: Hector Palacios <hector.palacios@digi.com> Acked-by: Juergen Beisert <jbe@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-08-02OMAPDSS: analog-tv-connector: compile fixTomi Valkeinen1-2/+16
connector-analog-tv.c uses omap_dss_pal_timings, defined in omapdss's venc.c, for default timings. omap_dss_pal_timings only exists when VENC is enabled in the kernel config, so disabling VENC breaks omap_dss_pal_timings connector-analog-tv compilation. Instead of adding dependency to VENC, add internal default timings to the connector driver, because the connector driver should not depend on VENC, and it can be used with any other analog TV encoder. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-07-31Merge tag 'fbdev-fixes-3.11-rc2' of ↵Linus Torvalds6-9/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: "Small fbdev fixes: - compile fixes - atyfb initialization fix - Fix freeing of the irq in sh7760fb & nuc900fb" * tag 'fbdev-fixes-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: sh7760fb: fix to pass correct device identity to free_irq() fbdev/atyfb: fix recent breakage in correct_chipset() fbdev/sgivwfb: fix compilation error in sgivwfb_mmap() video: nuc900fb: fix to pass correct device identity to request_irq() vga16fb: Remove unused variable video: xilinxfb: Fix compilation warning
2013-07-29video: sh7760fb: fix to pass correct device identity to free_irq()Wei Yongjun1-1/+1
free_irq() expects the same device identity that was passed to corresponding request_irq(), otherwise the IRQ is not freed. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-07-29fbdev/atyfb: fix recent breakage in correct_chipset()Dan Carpenter1-2/+2
The 6e36308a6f "fb: fix atyfb build warning" isn't right. It makes all the indexes off by one. This patch reverts it and casts the ARRAY_SIZE() to int to silence the build warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-07-26fbdev/sgivwfb: fix compilation error in sgivwfb_mmap()Tomi Valkeinen1-1/+1
Commit c84deb9d615c02993ce0972a0b34585c7624822f ("fbdev/sgivwfb: use vm_iomap_memory()") changed sgivwfb_mmap() to use the new vm_iomap_memory() function. The commit introduced the following compilation error: drivers/video/sgivwfb.c:716:9: note: each undeclared identifier is reported only once for each function it appears in This patch fixes the error. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-07-26video: nuc900fb: fix to pass correct device identity to request_irq()Wei Yongjun1-2/+1
The IRQ handler nuc900fb_irqhandler() use dev_id as a type of struct nuc900fb_info *, so we should pass fbi as the device identity to request_irq(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-07-26vga16fb: Remove unused variableLuis Henriques1-1/+0
Fix build warning of unused variable: drivers/video/vga16fb.c:1268:26: warning: unused variable ‘dev’ [-Wunused-variable] Signed-off-by: Luis Henriques<luis.henriques@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-07-26video: xilinxfb: Fix compilation warningMichal Simek1-2/+2
regs_phys is phys_addr_t (u32 or u64). Lets use %pa printk format specifier. Fixes compilation warning introduced by: video: xilinxfb: Use drvdata->regs_phys instead of physaddr (sha1: c88fafef0135e1e1c3e23c3e32ccbeeabc587f81) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-07-25mfd: max8925: fix dt code for backlightOlof Johansson1-20/+21
The device-tree enablement for max8925 has several problems, but besides the bindings being wrong (and not having seen review) there's also some bad coding practices on how to fill in the platform_data from device tree. I came across this since it causes a warning when compiling mmp2_defconfig, and instead of doing the minimal fix to silence the warning, I restructured the code a bit. This silences the warning: drivers/video/backlight/max8925_bl.c: In function 'max8925_backlight_probe': drivers/video/backlight/max8925_bl.c:177:3: warning: statement with no effect [-Wunused-value] Note that the bindings themselves need to be revisited too, but that will affect more than just the backlight driver and is best done separately; this just fixes the bad code for the backlight driver. Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-16uvesafb: Really allow mtrr being 0, as documented and warn()edSylvain 'ythier' Hitier1-1/+1
Fixup for commit "uvesafb: Clean up MTRR code" (63e28a7a5ffce59b645ca9cbcc01e1e8be56bd75) Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier@gmail.com> Acked-by: Andy Lutomirski <luto@amacapital.net> Also-spotted-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-14Linux 3.11-rc1v3.11-rc1Linus Torvalds1-1601/+880
2013-07-09Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-59/+34
Pull drm updates from Dave Airlie: "Okay this is the big one, I was stalled on the fbdev pull req as I stupidly let fbdev guys merge a patch I required to fix a warning with some patches I had, they ended up merging the patch from the wrong place, but the warning should be fixed. In future I'll just take the patch myself! Outside drm: There are some snd changes for the HDMI audio interactions on haswell, they've been acked for inclusion via my tree. This relies on the wound/wait tree from Ingo which is already merged. Major changes: AMD finally released the dynamic power management code for all their GPUs from r600->present day, this is great, off by default for now but also a huge amount of code, in fact it is most of this pull request. Since it landed there has been a lot of community testing and Alex has sent a lot of fixes for any bugs found so far. I suspect radeon might now be the biggest kernel driver ever :-P p.s. radeon.dpm=1 to enable dynamic powermanagement for anyone. New drivers: Renesas r-car display unit. Other highlights: - core: GEM CMA prime support, use new w/w mutexs for TTM reservations, cursor hotspot, doc updates - dvo chips: chrontel 7010B support - i915: Haswell (fbc, ips, vecs, watermarks, audio powerwell), Valleyview (enabled by default, rc6), lots of pll reworking, 30bpp support (this time for sure) - nouveau: async buffer object deletion, context/register init updates, kernel vp2 engine support, GF117 support, GK110 accel support (with external nvidia ucode), context cleanups. - exynos: memory leak fixes, Add S3C64XX SoC series support, device tree updates, common clock framework support, - qxl: cursor hotspot support, multi-monitor support, suspend/resume support - mgag200: hw cursor support, g200 mode limiting - shmobile: prime support - tegra: fixes mostly I've been banging on this quite a lot due to the size of it, and it seems to okay on everything I've tested it on." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (811 commits) drm/radeon/dpm: implement vblank_too_short callback for si drm/radeon/dpm: implement vblank_too_short callback for cayman drm/radeon/dpm: implement vblank_too_short callback for btc drm/radeon/dpm: implement vblank_too_short callback for evergreen drm/radeon/dpm: implement vblank_too_short callback for 7xx drm/radeon/dpm: add checks against vblank time drm/radeon/dpm: add helper to calculate vblank time drm/radeon: remove stray line in old pm code drm/radeon/dpm: fix display_gap programming on rv7xx drm/nvc0/gr: fix gpc firmware regression drm/nouveau: fix minor thinko causing bo moves to not be async on kepler drm/radeon/dpm: implement force performance level for TN drm/radeon/dpm: implement force performance level for ON/LN drm/radeon/dpm: implement force performance level for SI drm/radeon/dpm: implement force performance level for cayman drm/radeon/dpm: implement force performance levels for 7xx/eg/btc drm/radeon/dpm: add infrastructure to force performance levels drm/radeon: fix surface setup on r1xx drm/radeon: add support for 3d perf states on older asics drm/radeon: set default clocks for SI when DPM is disabled ...
2013-07-09Merge tag 'fbdev-for-3.11' of ↵Linus Torvalds86-1155/+8117
git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev Pull fbdev update from Jean-Christophe PLAGNIOL-VILLARD: "Various fbdev changes for 3.11 - xilinxfb updates - Small cleanups and fixes to multiple drivers - OMAP display subsystem bug updates - imxfb dt support" * tag 'fbdev-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev: (95 commits) video: imxfb: Add DT support video: i740fb: Make i740fb_init static fb: make fp_get_options name argument const video: mmp: fix graphics/video layer enable/mask swap issue video: mmp: fix memcpy wrong size for mmp_addr issue radeon: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) video: of_display_timing.h: Declare 'display_timing' fbdev: bfin-lq035q1-fb: Use dev_pm_ops fbmem: return -EFAULT on copy_to_user() failure OMAPDSS: DPI: Fix wrong pixel clock limit video: replace strict_strtoul() with kstrtoul() uvesafb: Correct/simplify warning message fb: fix atyfb unused data warnings fb: fix atyfb build warning video: imxfb: Make local symbols static video: udlfb: Make local symbol static video: udlfb: Use NULL instead of 0 video: smscufx: Use NULL instead of 0 video: remove unnecessary platform_set_drvdata() ...
2013-07-08video: imxfb: Add DT supportMarkus Pargmann2-35/+161
Add devicetree support for imx framebuffer driver. It uses the generic display bindings and helper functions. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-07-03Merge branch 'akpm' (updates from Andrew Morton)Linus Torvalds7-12/+155
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
2013-07-03backlight: convert from legacy pm ops to dev_pm_opsShuah Khan1-3/+7
Convert drivers/video/backlight/class to use dev_pm_ops for power management and remove Legacy PM ops hooks. With this change, backlight class registers suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy class->suspend/resume. When __device_suspend() runs call-backs, it will find class->pm ops for the backlight class. [jg1.han@samsung.com: add CONFIG_PM_SLEEP to suspend/resume functions] Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03lcd: add devm_lcd_device_{register,unregister}()Jingoo Han1-0/+70
These functions allow the driver core to automatically clean up any allocation made by lcd drivers. Thus it simplifies the error paths. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03backlight: add devm_backlight_device_{register,unregister}()Jingoo Han1-0/+75
These functions allow the driver core to automatically clean up any allocation made by backlight drivers. Thus it simplifies the error paths. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03backlight: pcf50633: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03backlight: lp8788: remove unnecessary platform_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03backlight: ep93xx: remove unnecessary platform_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03backlight: atmel-pwm-bl: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d06310 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers: avoid format string in dev_set_nameKees Cook3-3/+3
Calling dev_set_name with a single paramter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents, including wrappers like device_create*() and bdi_register(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Merge branch 'exotic-arch-fixes' of ↵Linus Torvalds13-31583/+10
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull "exotic" arch fixes from Geert Uytterhoeven: "This is a collection of several exotic architecture fixes, and a few other fixes for issues that were detected while doing the former" * 'exotic-arch-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (35 commits) lib: Move fonts from drivers/video/console/ to lib/fonts/ console/font: Refactor font support code selection logic Revert "staging/solo6x10: depend on CONFIG_FONTS" input: cros_ec_keyb_clear_keyboard() depends on CONFIG_PM_SLEEP score: Wire up asm-generic/xor.h score: Remove unneeded <asm/dma-mapping.h> openrisc: Wire up asm-generic/xor.h h8300/boot: Use POSIX "$((..))" instead of bashism "$[...]" h8300: Mark H83002 and H83048 CPU support broken h8300: Switch h8300 to drivers/Kconfig h8300: Limit timer channel ranges in Kconfig h8300: Wire up asm-generic/xor.h h8300: Fill the system call table using a CALL() macro h8300: Fix <asm/tlb.h> h8300: Hardcode symbol prefixes in asm sources h8300: add missing definition for read_barries_depends() frv: head.S - Remove commented-out initialization code cris: Wire up asm-generic/vga.h parport: disable PC-style parallel port support on cris console: Disable VGA text console support on cris ...
2013-07-02Merge branch 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-1/+1
Pull workqueue changes from Tejun Heo: "Surprisingly, Lai and I didn't break too many things implementing custom pools and stuff last time around and there aren't any follow-up changes necessary at this point. The only change in this pull request is Viresh's patches to make some per-cpu workqueues to behave as unbound workqueues dependent on a boot param whose default can be configured via a config option. This leads to higher processing overhead / lower bandwidth as more work items are bounced across CPUs; however, it can lead to noticeable powersave in certain configurations - ~10% w/ idlish constant workload on a big.LITTLE configuration according to Viresh. This is because per-cpu workqueues interfere with how the scheduler perceives whether or not each CPU is idle by forcing pinned tasks on them, which makes the scheduler's power-aware scheduling decisions less effective. Its effectiveness is likely less pronounced on homogenous configurations and this type of optimization can probably be made automatic; however, the changes are pretty minimal and the affected workqueues are clearly marked, so it's an easy gain for some configurations for the time being with pretty unintrusive changes." * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: fbcon: queue work on power efficient wq block: queue work on power efficient wq PHYLIB: queue work on system_power_efficient_wq workqueue: Add system wide power_efficient workqueues workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues
2013-07-02Merge tag 'driver-core-3.11-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the big driver core merge for 3.11-rc1 Lots of little things, and larger firmware subsystem updates, all described in the shortlog. Nice thing here is that we finally get rid of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had been always on for a number of kernel releases, now it's just removed)" * tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits) driver core: device.h: fix doc compilation warnings firmware loader: fix another compile warning with PM_SLEEP unset build some drivers only when compile-testing firmware loader: fix compile warning with PM_SLEEP set kobject: sanitize argument for format string sysfs_notify is only possible on file attributes firmware loader: simplify holding module for request_firmware firmware loader: don't export cache_firmware and uncache_firmware drivers/base: Use attribute groups to create sysfs memory files firmware loader: fix compile warning firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER Documentation: Updated broken link in HOWTO Finally eradicate CONFIG_HOTPLUG driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware Documentation: Tidy up some drivers/base/core.c kerneldoc content. platform_device: use a macro instead of platform_driver_register firmware: move EXPORT_SYMBOL annotations firmware: Avoid deadlock of usermodehelper lock at shutdown dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly ...
2013-07-02Merge tag 'tty-3.11-rc1' of ↵Linus Torvalds4-37/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big TTY / Serial driver merge for 3.11-rc1. It's not all that big, nothing major changed in the tty api, which is a nice change, just a number of serial driver fixes and updates and new drivers, along with some n_tty fixes to help resolve some reported issues. All of these have been in the linux-next releases for a while, with the exception of the last revert patch, which was reported this past weekend by two different people as being needed." * tag 'tty-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (51 commits) Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller" pch_uart: Add uart_clk selection for the MinnowBoard tty: atmel_serial: prepare clk before calling enable tty: Reset itty for other pty n_tty: Buffer work should not reschedule itself n_tty: Fix unsafe update of available buffer space n_tty: Untangle read completion variables n_tty: Encapsulate minimum_to_wake within N_TTY serial: omap: Fix device tree based PM runtime serial: imx: Fix serial clock unbalance serial/mpc52xx_uart: fix kernel panic when system reboot serial: mfd: Add sysrq support serial: imx: enable the clocks for console tty: serial: add Freescale lpuart driver support serial: imx: Improve Kconfig text serial: imx: Allow module build serial: imx: Fix warning when !CONFIG_SERIAL_IMX_CONSOLE tty/serial/sirf: fix error propagation in sirfsoc_uart_probe() serial: omap: fix potential NULL pointer dereference in serial_omap_runtime_suspend() tty: serial: Enable uartlite for ARM zynq ...
2013-06-29pxa3xx: VM_IO is set by io_remap_pfn_range()Al Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29au1100fb: VM_IO is set by io_remap_pfn_range()Al Viro1-2/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29au1200fb: io_remap_pfn_range() sets VM_IOAl Viro1-4/+0
... and single return is quite sufficient to get out of function, TYVM Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-28Merge tag 'fbdev-3.11-2' of git://gitorious.org/linux-omap-dss2/linux into ↵Jean-Christophe PLAGNIOL-VILLARD34-136/+112
fbdev/for-next Various fbdev changes for 3.11 * xilinxfb updates * Small cleanups and fixes to multiple drivers
2013-06-28Merge tag 'omapdss-for-3.11-2' of git://gitorious.org/linux-omap-dss2/linux ↵Jean-Christophe PLAGNIOL-VILLARD27-27/+6513
into fbdev/for-next OMAP display subsystem changes for 3.11 (part 2/2) This is the second part of OMAP DSS changes for 3.11. This part contains the new DSS device model support. The current OMAP panel drivers use a custom DSS bus, and there's a hard limit of one external display block per video pipeline. In the new DSS device model the devices/drivers are made according to the control bus of the display block, usually platform, i2c or spi. The display blocks can also be chained so that we can have separate drivers for setups with both external encoder and panel. To allow the current board files, which use the old style panels, to function, the old display drivers are left in their current state, and new ones are added to drivers/video/omap2/displays-new/. When the board files have been converted to use the new style panels, we can remove the old code. This is planned to happen in v3.12. Having to support two very different DSS device models makes the driver somewhat confusing in some parts, and prevents us from properly cleaning up some other parts. These cleanups will be done when the old code is removed. The new device model is designed with CDF (Common Display Framework) in mind. While CDF is still under work, the new DSS device model should be much more similar to CDF's model than the old device model, which should make the eventual conversion to CDF much easier.
2013-06-28Merge tag 'omapdss-for-3.11-1' of git://gitorious.org/linux-omap-dss2/linux ↵Jean-Christophe PLAGNIOL-VILLARD35-841/+1002
into fbdev/for-next OMAP display subsystem changes for 3.11 (part 1/2) This is the first part of OMAP DSS changes for 3.11. This part contains fixes, cleanups and reorganizations that are not directly related to the new DSS device model that is added in part 2, although many of the reorganizations are made to make the part 2 possible. There should not be any functional changes visible to the user except the few bug fixes. The main new internal features: - Display (dis)connect support, which allows us to explicitly (dis)connect a whole display pipeline - Panel list, which allows us to operate without the specific DSS bus - Combine omap_dss_output to omap_dss_device, so that we have one generic "entity" for display pipeline blocks
2013-06-28lib: Move fonts from drivers/video/console/ to lib/fonts/Geert Uytterhoeven14-31578/+1
Several drivers need font support independent of CONFIG_VT, cfr. commit 9cbce8d7e1dae0744ca4f68d62aa7de18196b6f4, "console/font: Refactor font support code selection logic"). Hence move the fonts and their support logic from drivers/video/console/ to its own library directory lib/fonts/. This also allows to limit processing of drivers/video/console/Makefile to CONFIG_VT=y again. [Kevin Hilman <khilman@linaro.org>: Update arch/arm/boot/compressed/Makefile] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-27Merge tag 'v3.10-rc7' into drm-nextDave Airlie7-6/+288
Linux 3.10-rc7 The sdvo lvds fix in this -fixes pull commit c3456fb3e4712d0448592af3c5d644c9472cd3c1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Jun 10 09:47:58 2013 +0200 drm/i915: prefer VBT modes for SVDO-LVDS over EDID has a silent functional conflict with commit 990256aec2f10800595dddf4d1c3441fcd6b2616 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri May 31 12:17:07 2013 +0000 drm: Add probed modes in probe order in drm-next. W simply need to add the vbt modes before edid modes, i.e. the other way round than now. Conflicts: drivers/gpu/drm/drm_prime.c drivers/gpu/drm/i915/intel_sdvo.c
2013-06-27video: i740fb: Make i740fb_init staticSachin Kamat1-1/+1
i740fb_init is referenced only in this function. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-27fb: make fp_get_options name argument constVincent Stehlé1-1/+1
drm_get_connector_name now returns a const value, which causes the following compilation warning: drivers/gpu/drm/drm_fb_helper.c: In function ‘drm_fb_helper_parse_command_line’: drivers/gpu/drm/drm_fb_helper.c:127:3: warning: passing argument 1 of ‘fb_get_options’ discards ‘const’ qualifier from pointer target type [enabled by default] In file included from drivers/gpu/drm/drm_fb_helper.c:35:0: include/linux/fb.h:627:12: note: expected ‘char *’ but argument is of type ‘const char *’ As fb_get_options uses its name argument as read only, make it const. This fixes the aforementioned compilation warning. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Dave Airlie <airlied@redhat.com> Cc: trivial@kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-06-27video: mmp: fix graphics/video layer enable/mask swap issueJing Xiang1-3/+3
There is bug when switch dma of graphic layer and video layer, it configured opposite bit, fix it. Signed-off-by: Jing Xiang <jxiang@marvell.com> Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-06-27video: mmp: fix memcpy wrong size for mmp_addr issueJing Xiang1-1/+1
Memcpy used wrong struct of mmp_win, fix it. Signed-off-by: Jing Xiang <jxiang@marvell.com> Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-06-27radeon: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)Yijing Wang1-1/+1
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init() in init path. So we can use pdev->pm_cap instead of using pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-27aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)Yijing Wang1-1/+1
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init() in init path. So we can use pdev->pm_cap instead of using pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-27vgacon: fix missing include.Dave Airlie1-0/+1
This fixes the build error. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-26fbdev: bfin-lq035q1-fb: Use dev_pm_opsLars-Peter Clausen1-8/+14
Use dev_pm_ops instead of the legacy suspend/resume callbacks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-26fbmem: return -EFAULT on copy_to_user() failureDan Carpenter1-1/+3
copy_to_user() returns the number of bytes remaining to be copied. put_user() returns -EFAULT on error. This function ORs a bunch of stuff together and returns jumbled non-zero values on error. It should return -EFAULT. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-26OMAPDSS: DPI: Fix wrong pixel clock limitTomi Valkeinen1-2/+2
DPI is supposed to skip odd dividers in the clock path when the pixel clock is higher than 100MHz. The code, however, defines the pixel clock limit as 1MHz. This causes the driver to skip valid clock dividers, possibly making the pixel clock to be further away from the requested one than necessary. Fix the clock limit to 100MHz. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: NeilBrown <neilb@suse.de>
2013-06-26video: replace strict_strtoul() with kstrtoul()Jingoo Han3-6/+6
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>