summaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2013-11-16Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A first set of batches of fixes for 3.13. The diffstat is large mostly because we're adding a defconfig for a family that's been lacking it, and there's some missing clock information added for i.MX and OMAP. The at91 new code is around dealing with RTC/RTT reset at boot to fix possible hangs due to pending wakeup interrupts coming in during early boot" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: OMAP2+: Fix build for dra7xx without omap4 and 5 ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume doc: devicetree: Add bindings documentation for omap-des driver ARM: dts: doc: Document missing compatible property for omap-sham driver ARM: OMAP3: Beagle: fix return value check in beagle_opp_init() ARM: at91: fix hanged boot due to early rtt-interrupt ARM: at91: fix hanged boot due to early rtc-interrupt video: exynos_mipi_dsim: Remove unused variable ARM: highbank: only select errata 764369 if SMP ARM: sti: only select errata 764369 if SMP ARM: tegra: init fuse before setting reset handler ARM: vt8500: add defconfig for v6/v7 chips ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCD ARM: OMAP: devicetree: fix SPI node compatible property syntax items pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init() MAINTAINERS: drop discontinued mailing list ARM: dts: i.MX51: Fix OTG PHY clock ARM: imx: set up pllv3 POWER and BYPASS sequentially ARM: imx: pllv3 needs relock in .set_rate() call ...
2013-11-16Merge tag 'pwm/for-3.13-rc1' of ↵Linus Torvalds1-36/+130
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "Mostly bug fixes and clean up. There is a new driver, which is actually moving a custom PWM driver from drivers/misc. The majority of the patches are enhancements to the device tree support in the pwm-backlight driver. Backlights can now additionally be powered using a regulator and enabled using a GPIO in addition to just the PWM input" * tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits) Documentation/pwm: Update supported SoC name for pwm-samsung pwm: samsung: Fix kernel warning while unexporting a channel MAINTAINERS: Move PWM subsystem tree to kernel.org Documentation/pwm: Fix trivial typos pwm-backlight: Remove unused variable pwm_backlight: avoid short blank screen while doing hibernation pwm-backlight: Fix brightness adjustment pwm: add ep93xx PWM support pwm-backlight: Allow for non-increasing brightness levels pwm-backlight: Add power supply support pwm-backlight: Use new enable_gpio field unicore32: Initialize PWM backlight enable_gpio field ARM: shmobile: Initialize PWM backlight enable_gpio field ARM: SAMSUNG: Initialize PWM backlight enable_gpio field ARM: pxa: Initialize PWM backlight enable_gpio field ARM: OMAP: Initialize PWM backlight enable_gpio field pwm-backlight: Add optional enable GPIO pwm-backlight: Track enable state pwm-backlight: Refactor backlight power on/off pwm-backlight: Improve readability ...
2013-11-15Merge tag 'omap-for-v3.13/fixes-for-merge-window-take2' of ↵Olof Johansson2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Few clock fixes, a runtime PM fix, and pinctrl-single fix along with few other fixes that popped up during the merge window. * tag 'omap-for-v3.13/fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix build for dra7xx without omap4 and 5 ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume doc: devicetree: Add bindings documentation for omap-des driver ARM: dts: doc: Document missing compatible property for omap-sham driver ARM: OMAP3: Beagle: fix return value check in beagle_opp_init() ARM: OMAP: devicetree: fix SPI node compatible property syntax items pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init() + sync with newer trunk
2013-11-15Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-2/+2
Pull drm updates from Dave Airlie: "This is a combo of -next and some -fixes that came in in the intervening time. Highlights: New drivers: ARM Armada driver for Marvell Armada 510 SOCs Intel: Broadwell initial support under a default off switch, Stereo/3D HDMI mode support Valleyview improvements Displayport improvements Haswell fixes initial mipi dsi panel support CRC support for debugging build with CONFIG_FB=n Radeon: enable DPM on a number of GPUs by default secondary GPU powerdown support enable HDMI audio by default Hawaii support Nouveau: dynamic pm code infrastructure reworked, does nothing major yet GK208 modesetting support MSI fixes, on by default again PMPEG improvements pageflipping fixes GMA500: minnowboard SDVO support VMware: misc fixes MSM: prime, plane and rendernodes support Tegra: rearchitected to put the drm driver into the drm subsystem. HDMI and gr2d support for tegra 114 SoC QXL: oops fix, and multi-head fixes DRM core: sysfs lifetime fixes client capability ioctl further cleanups to device midlayer more vblank timestamp fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (789 commits) drm/nouveau: do not map evicted vram buffers in nouveau_bo_vma_add drm/nvc0-/gr: shift wrapping bug in nvc0_grctx_generate_r406800 drm/nouveau/pwr: fix missing mutex unlock in a failure path drm/nv40/therm: fix slowing down fan when pstate undefined drm/nv11-: synchronise flips to vblank, unless async flip requested drm/nvc0-: remove nasty fifo swmthd hack for flip completion method drm/nv10-: we no longer need to create nvsw object on user channels drm/nouveau: always queue flips relative to kernel channel activity drm/nouveau: there is no need to reserve/fence the new fb when flipping drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence drm/nouveau: allow nouveau_fence_ref() to be a noop drm/nvc8/mc: msi rearm is via the nvc0 method drm/ttm: Fix vma page_prot bit manipulation drm/vmwgfx: Fix a couple of compile / sparse warnings and errors drm/vmwgfx: Resource evict fixes drm/edid: compare actual vrefresh for all modes for quirks drm: shmob_drm: Convert to clk_prepare/unprepare drm/nouveau: fix 32-bit build drm/i915/opregion: fix build error on CONFIG_ACPI=n Revert "drm/radeon/audio: don't set speaker allocation on DCE4+" ...
2013-11-14video: exynos_mipi_dsim: Remove unused variableOlof Johansson1-1/+0
commit 7e0be9f9f7cba3356f75b86737dbe3a005da067e ('video: exynos_mipi_dsim: Use the generic PHY driver') resulted in a warning about an unused variable: drivers/video/exynos/exynos_mipi_dsi.c:144:26: warning: unused variable 'pdev' [-Wunused-variable] It is indeed unused; remove it. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang2-3/+3
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-14Merge tag 'fbdev-3.13' of ↵Linus Torvalds150-3031/+3791
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev changes from Tomi Valkeinen: "Nothing particularly stands out in this pull request. The biggest part of the changes are cleanups. Maybe one fix to mention is the "fb: reorder the lock sequence to fix potential dead lock" which hopefully fixes the fb locking issues reported by multiple persons. There are also a few commits that have changes to arch/arm/mach-at91 and arch/avr32, which have been acked by the maintainers" * tag 'fbdev-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (143 commits) fb: reorder the lock sequence to fix potential dead lock fbdev: shmobile-lcdcfb: Convert to clk_prepare/unprepare fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare omapdss: Add new panel driver for Topolly td028ttec1 LCD. video: exynos_mipi_dsi: Unlock the mutex before returning video: da8xx-fb: remove unwanted define video: Remove unnecessary semicolons simplefb: use write-combined remapping simplefb: fix unmapping fb during destruction OMAPDSS: connector-dvi: fix releasing i2c_adapter OMAPDSS: DSI: fix perf measuring ifdefs framebuffer: Use fb_<level> framebuffer: Add fb_<level> convenience logging macros efifb: prevent null-deref when iterating dmi_list fbdev: fix error return code in metronomefb_probe() video: xilinxfb: Fix for "Use standard variable name convention" OMAPDSS: Fix de_level in videomode_to_omap_video_timings() video: xilinxfb: Simplify error path video: xilinxfb: Use devm_kzalloc instead of kzalloc video: xilinxfb: Use standard variable name convention ...
2013-11-14Merge tag 'pm+acpi-3.13-rc1' of ↵Linus Torvalds1-0/+31
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael J Wysocki: - New power capping framework and the the Intel Running Average Power Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan. - Addition of the in-kernel switching feature to the arm_big_little cpufreq driver from Viresh Kumar and Nicolas Pitre. - cpufreq support for iMac G5 from Aaro Koskinen. - Baytrail processors support for intel_pstate from Dirk Brandewie. - cpufreq support for Midway/ECX-2000 from Mark Langsdorf. - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha. - ACPI power management support for the I2C and SPI bus types from Mika Westerberg and Lv Zheng. - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat, Stratos Karafotis, Xiaoguang Chen, Lan Tianyu. - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev. - intel_pstate updates from Dirk Brandewie and Adrian Huang. - ACPICA update to version 20130927 includig fixes and cleanups and some reduction of divergences between the ACPICA code in the kernel and ACPICA upstream in order to improve the automatic ACPICA patch generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh Bhat, Bjorn Helgaas, David E Box. - ACPI IPMI driver fixes and cleanups from Lv Zheng. - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang Yanfei, Rafael J Wysocki. - Conversion of the ACPI AC driver to the platform bus type and multiple driver fixes and cleanups related to ACPI from Zhang Rui. - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu, Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki. - Fixes and cleanups and new blacklist entries related to the ACPI video support from Aaron Lu, Felipe Contreras, Lennart Poettering, Kirill Tkhai. - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi. - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han, Bartlomiej Zolnierkiewicz, Prarit Bhargava. - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe. - Operation Performance Points (OPP) core updates from Nishanth Menon. - Runtime power management core fix from Rafael J Wysocki and update from Ulf Hansson. - Hibernation fixes from Aaron Lu and Rafael J Wysocki. - Device suspend/resume lockup detection mechanism from Benoit Goby. - Removal of unused proc directories created for various ACPI drivers from Lan Tianyu. - ACPI LPSS driver fix and new device IDs for the ACPI platform scan handler from Heikki Krogerus and Jarkko Nikula. - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa. - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter, Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause, Liu Chuansheng. - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding, Jean-Christophe Plagniol-Villard. * tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits) cpufreq: conservative: fix requested_freq reduction issue ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines PM / runtime: Use pm_runtime_put_sync() in __device_release_driver() ACPI / event: remove unneeded NULL pointer check Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1" ACPI / video: Quirk initial backlight level 0 ACPI / video: Fix initial level validity test intel_pstate: skip the driver if ACPI has power mgmt option PM / hibernate: Avoid overflow in hibernate_preallocate_memory() ACPI / hotplug: Do not execute "insert in progress" _OST ACPI / hotplug: Carry out PCI root eject directly ACPI / hotplug: Merge device hot-removal routines ACPI / hotplug: Make acpi_bus_hot_remove_device() internal ACPI / hotplug: Simplify device ejection routines ACPI / hotplug: Fix handle_root_bridge_removal() ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug ACPI / scan: Start matching drivers after trying scan handlers ACPI: Remove acpi_pci_slot_init() headers from internal.h ACPI / blacklist: fix name of ThinkPad Edge E530 PowerCap: Fix build error with option -Werror=format-security ... Conflicts: arch/arm/mach-omap2/opp.c drivers/Kconfig drivers/spi/spi.c
2013-11-14Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-0/+5
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
2013-11-13drivers/video/backlight/hx8357.c: remove redundant of_match_ptrSachin Kamat1-1/+1
'hx8357_dt_ids' is always compiled in. Hence of_match_ptr is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: use gpio_request_oneJohan Hovold1-7/+8
Use devm_gpio_request_one rather than requesting and setting direction in two calls. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: refactor gpio_on handlingJohan Hovold1-12/+11
Add helper function to control the gpio_on signal. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: use gpio_is_validJohan Hovold1-4/+4
Use gpio_is_valid rather than open coding the more restrictive != -1 test. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: remove unused includeJohan Hovold1-1/+0
Remove unused include of clk.h. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: clean up get_intensityJohan Hovold1-7/+6
Clean up get_intensity to increase readability. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: clean up probe error handlingJohan Hovold1-19/+12
Clean up probe error handling by checking parameters before any allocations and removing an obsolete error label. Also remove unnecessary reset of private gpio number. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: fix module autoloadJohan Hovold1-0/+1
Add missing module alias which is needed for module autoloading. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: fix gpio polarity in removeJohan Hovold1-2/+4
Make sure to honour gpio polarity also at remove so that the backlight is actually disabled on boards with active-low enable pin. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: fix reported brightnessJohan Hovold1-2/+2
The driver supports 16-bit brightness values, but the value returned from get_brightness was truncated to eight bits. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13drivers/video/backlight/lm3630a_bl.c: add missing destroy_workqueue() on ↵Wei Yongjun1-0/+1
error in lm3630a_intr_config() Add the missing destroy_workqueue() before return from lm3630a_intr_config() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: s6e63m0: use devm_{backlight,lcd}_device_register()Jingoo Han1-13/+7
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: cr_bllcd: use devm_{backlight,lcd}_device_register()Jingoo Han1-8/+5
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: corgi_lcd: use devm_{backlight,lcd}_device_register()Jingoo Han1-19/+9
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ld9040: use devm_{backlight,lcd}_device_register()Jingoo Han1-15/+6
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ams369fg06: use devm_{backlight,lcd}_device_register()Jingoo Han1-15/+7
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: tdo24m: use devm_lcd_device_register()Jingoo Han1-9/+3
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: platform_lcd: use devm_lcd_device_register()Jingoo Han1-17/+3
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ltv350qv: use devm_lcd_device_register()Jingoo Han1-8/+3
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lms501kf03: use devm_lcd_device_register()Jingoo Han1-4/+2
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lms283gf05: use devm_lcd_device_register()Jingoo Han1-11/+2
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ili9320: use devm_lcd_device_register()Jingoo Han1-10/+3
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ili922x: use devm_lcd_device_register()Jingoo Han1-5/+2
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: hx8357: use devm_lcd_device_register()Jingoo Han1-15/+3
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: wm831x_bl: use devm_backlight_device_register()Jingoo Han1-11/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: tps65217_bl: use devm_backlight_device_register()Jingoo Han1-11/+1
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: pcf50633: use devm_backlight_device_register()Jingoo Han1-11/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: pandora_bl: use devm_backlight_device_register()Jingoo Han1-10/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: max8925_bl: use devm_backlight_device_register()Jingoo Han1-14/+3
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lv5207lp: use devm_backlight_device_register()Jingoo Han1-4/+3
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lp855x: use devm_backlight_device_register()Jingoo Han1-16/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Also, unnecessary lp855x_backlight_unregister() is removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lm3533_bl: use devm_backlight_device_register()Jingoo Han1-6/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: kb3886_bl: use devm_backlight_device_register()Jingoo Han1-14/+4
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: gpio_backlight: use devm_backlight_device_register()Jingoo Han1-11/+3
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: generic_bl: use devm_backlight_device_register()Jingoo Han1-4/+2
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ep93xx: use devm_backlight_device_register()Jingoo Han1-11/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: da9052_bl: use devm_backlight_device_register()Jingoo Han1-3/+3
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: da903x_bl: use devm_backlight_device_register()Jingoo Han1-11/+3
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: bd6107: use devm_backlight_device_register()Jingoo Han1-2/+2
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: use devm_backlight_device_register()Jingoo Han1-6/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: as3711_bl: use devm_backlight_device_register()Jingoo Han1-21/+5
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>