summaryrefslogtreecommitdiffstats
path: root/drivers/video/fbdev/matrox
AgeCommit message (Collapse)AuthorFilesLines
2019-06-14docs: fb: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Also, removed the Maintained by, as requested by Geert. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner9-0/+9
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 && ↵Finn Thain1-2/+3
CONFIG_PPC_PMAC && CONFIG_NVRAM This patch addresses inconsistencies in Mac framebuffer drivers and their use of Kconfig symbols relating to NVRAM, so PPC64 can use CONFIG_NVRAM. The defined(CONFIG_NVRAM) condition is replaced with the weaker IS_REACHABLE(CONFIG_NVRAM) condition, like atari_scsi. Macintosh framebuffer drivers use default settings for color mode and video mode that are found in NVRAM. On PCI Macs, MacOS stores display settings in the Name Registry (NR) partition in NVRAM*. On NuBus Macs, there is no NR partition and MacOS stores display mode settings in PRAM**. Early-model Macs are the ones most likely to benefit from these settings, since they are more likely to have a fixed-frequency monitor connected to the built-in framebuffer device. Moreover, a single NV_CMODE value and a single NV_VMODE value provide for only one display. The NV_CMODE and NV_VMODE constants are apparently offsets into the NR partition for Old World machines. This also suggests that these defaults are not useful on later models. The NR partition seems to be optional on New World machines. CONFIG_NVRAM cannot be enabled on PPC64 at present. It is safe to say that NVRAM support in PowerMac fbdev drivers is only applicable to CONFIG_PPC32 so make this condition explicit. This means matroxfb driver won't crash on PPC64 when CONFIG_NVRAM becomes available there. For imsttfb, add the missing CONFIG_NVRAM test to prevent a build failure, since PPC64 does not implement nvram_read_byte(). Also add a missing machine_is(powermac) check. Change the inconsistent dependency on CONFIG_PPC and the matching #ifdef tests to CONFIG_PPC_PMAC. For valkyriefb, to improve clarity and consistency with the other PowerMac fbdev drivers, test for CONFIG_PPC_PMAC instead of !CONFIG_MAC. Remove a bogus comment regarding PRAM. * See GetPreferredConfiguration and SavePreferredConfiguration in "Designing PCI Cards and Drivers for Power Macintosh Computers". ** See SetDefaultMode and GetDefaultMode in "Designing Cards and Drivers for the Macintosh Family". Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22powerpc: Replace nvram_* extern declarations with standard headerFinn Thain1-1/+1
Remove the nvram_read_byte() and nvram_write_byte() declarations in powerpc/include/asm/nvram.h and use the cross-platform static functions in linux/nvram.h instead. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28video: matroxfb: Delete an error message for a failed memory allocation in ↵Markus Elfring1-3/+2
matroxfb_crtc2_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-20Merge tag 'fbdev-v4.15' of git://github.com/bzolnier/linuxLinus Torvalds1-1/+1
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "There is nothing really major here (though removal of the dead igafb driver stands out in diffstat). Summary: - convert timers to use timer_setup() (Kees Cook, Thierry Reding) - fix panels support on iMX boards in mxsfb driver (Stefan Agner) - fix timeout on EDID read in udlfb driver (Ladislav Michl) - add missing modes to fix out of bounds access in controlfb driver (Geert Uytterhoeven) - update initialisation paths in sa1100fb driver to be more robust (Russell King) - fix error handling path of ->probe method in au1200fb driver (Christophe JAILLET) - fix handling of cases when either panel or crt is defined in sm501fb driver (Sudip Mukherjee, Colin Ian King) - add ability to the Goldfish FB driver to be recognized by OS via DT (Aleksandar Markovic) - structures constifications (Bhumika Goyal) - misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter) - misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring) - remove dead igafb driver" * tag 'fbdev-v4.15' of git://github.com/bzolnier/linux: (42 commits) OMAPFB: prevent buffer underflow in omapfb_parse_vram_param() video: fbdev: sm501fb: fix potential null pointer dereference on fbi fbcon: Initialize ops->info early video: fbdev: Convert timers to use timer_setup() video: fbdev: pxa3xx_gcu: Convert timers to use timer_setup() fbdev: controlfb: Add missing modes to fix out of bounds access video: fbdev: sis_main: mark expected switch fall-throughs video: fbdev: cirrusfb: mark expected switch fall-throughs video: fbdev: aty: radeon_pm: mark expected switch fall-throughs video: fbdev: sm501fb: mark expected switch fall-through in sm501fb_blank_crt video: fbdev: intelfb: remove redundant variables video/fbdev/dnfb: Use common error handling code in dnfb_probe() sm501fb: suspend and resume fb if it exists sm501fb: unregister framebuffer only if registered sm501fb: deallocate colormap only if allocated video: goldfishfb: Add support for device tree bindings Documentation: Add device tree binding for Goldfish FB driver video: udlfb: Fix read EDID timeout video: fbdev: remove dead igafb driver video: fbdev: mxsfb: fix pixelclock polarity ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman9-0/+9
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12video: fbdev: matroxfb: return -ENOMEM on allocation failureAllen Pais1-1/+1
Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-09-04video: fbdev: make fb_videomode constBhumika Goyal1-1/+1
Make these const as they are only passed to a const argument of the function fb_find_mode. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct fb_videomode s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression list[5] es; position ref.p; @@ fb_find_mode(es,&s@p,...) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct fb_videomode s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-21fbdev: matrox: make fb_ops constBhumika Goyal1-1/+1
Make fb_ops const as it is only used during a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-07fbdev: matrox: hide unused 'hotplug' variableArnd Bergmann1-1/+1
The variable has become unused in modular configurations which triggers a harmless warning: drivers/video/fbdev/matrox/matroxfb_base.c:1583:12: error: 'hotplug' defined but not used [-Werror=unused-variable] This moves it into an #ifdef section of the file, matching all its references. Fixes: 376b3ff54c9a ("fbdev: Nuke FBINFO_MODULE") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01fbdev: Nuke FBINFO_MODULEDaniel Vetter1-3/+1
Instead check info->ops->owner, which amounts to the same. Spotted because I want to remove the pile of broken and cargo-culted fb_info->flags assignments in drm drivers. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01video: fbdev: matroxfb: constify pci_device_id.Arvind Yadav1-2/+2
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 19884 3036 96 23016 59e8 fbdev/matrox/matroxfb_base.o File size after adding 'const': text data bss dec hex filename 20300 2620 96 23016 59e8 fbdev/matrox/matroxfb_base.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Maik Broemme <mbroemme@libmpq.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-07-04video: fbdev: matrox: the list iterator can't be NULLDan Carpenter1-1/+1
My static checker is complaining because we check "drv" for NULL and then we dereference it to get the next item in the list. It can't be NULL so we can remove this check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-11video: fbdev: matroxfb: use designated initializersKees Cook2-3/+12
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-09-27matroxfb: fix size of memcpySudip Mukherjee1-1/+1
hw->DACreg has a size of 80 bytes and MGADACbpp32 has 21. So when memcpy copies MGADACbpp32 to hw->DACreg it copies 80 bytes but only 21 bytes are valid. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27matroxfb: constify local structuresJulia Lawall1-1/+1
For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-05PCI: Remove includes of asm/pci-bridge.hBjorn Helgaas1-1/+0
Drivers should include asm/pci-bridge.h only when they need the arch- specific things provided there. Outside of the arch/ directories, the only drivers that actually need things provided by asm/pci-bridge.h are the powerpc RPA hotplug drivers in drivers/pci/hotplug/rpa*. Remove the includes of asm/pci-bridge.h from the other drivers, adding an include of linux/pci.h if necessary. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-06-03video: fbdev: matrox: use arch_phys_wc_add() and ioremap_wc()Luis R. Rodriguez2-49/+14
This driver uses the same ioremap()'d area for the MTRR. Convert the driver from using the x86 specific MTRR code to the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add() will avoid MTRR if write-combining is available, in order to take advantage of that also ensure the ioremap'd area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available b) Help bury MTRR code away, MTRR is architecture specific and on x86 its replaced by PAT c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the #ifdery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Generated-by: Coccinelle SmPL Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-05-27video: fbdev: matrox: use swap() in matroxfb_decode_var()Fabian Frederick1-5/+1
Use kernel.h macro definition. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26video: fbdev: matrox: use c99 initializers in structuresJulia Lawall2-16/+56
Use c99 initializers for structures. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @decl@ identifier i1,fld; type T; field list[n] fs; @@ struct i1 { fs T fld; ...}; @bad@ identifier decl.i1,i2; expression e; initializer list[decl.n] is; @@ struct i1 i2 = { is, + .fld = e - e ,...}; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23matroxfb: perform a dummy read of M_STATUSMikulas Patocka1-1/+1
I had occasional screen corruption with the matrox framebuffer driver and I found out that the reason for the corruption is that the hardware blitter accesses the videoram while it is being written to. The matrox driver has a macro WaitTillIdle() that should wait until the blitter is idle, but it sometimes doesn't work. I added a dummy read mga_inl(M_STATUS) to WaitTillIdle() to fix the problem. The dummy read will flush the write buffer in the PCI chipset, and the next read of M_STATUS will return the hardware status. Since applying this patch, I had no screen corruption at all. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-17video: move fbdev to drivers/video/fbdevTomi Valkeinen20-0/+10272
The drivers/video directory is a mess. It contains generic video related files, directories for backlight, console, linux logo, lots of fbdev device drivers, fbdev framework files. Make some order into the chaos by creating drivers/video/fbdev directory, and move all fbdev related files there. No functionality is changed, although I guess it is possible that some subtle Makefile build order related issue could be created by this patch. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>