summaryrefslogtreecommitdiffstats
path: root/drivers/video/backlight
AgeCommit message (Collapse)AuthorFilesLines
2019-11-13backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Pull gpio_backlight_initial_power_state() into probeBartosz Golaszewski1-24/+14
The probe function in the gpio-backlight driver is quite short. If we pull gpio_backlight_initial_power_state() into probe we can drop two more fields from struct gpio_backlight and shrink the driver code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Use a helper variable for &pdev->devBartosz Golaszewski1-12/+11
Instead of dereferencing pdev each time, use a helper variable for the associated device pointer. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Simplify the platform data handlingBartosz Golaszewski1-51/+11
Now that the last user of platform data (sh ecovec24) defines a proper GPIO lookup and sets the 'default-on' device property, we can drop the platform_data-specific GPIO handling and unify a big chunk of code. The only field used from the platform data is now the fbdev pointer. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Explicitly set the direction of the GPIOBartosz Golaszewski1-5/+18
The GPIO backlight driver currently requests the line 'as is', without acively setting its direction. This can lead to problems: if the line is in input mode by default, we won't be able to drive it later when updating the status and also reading its initial value doesn't make sense for backlight setting. Request the line 'as is' initially, so that we can read its value without affecting it but then change the direction to output explicitly when setting the initial brightness. Also: check the current direction and only read the value if it's output. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Remove stray newlineBartosz Golaszewski1-1/+0
Remove a double newline from the driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11backlight: gpio: Remove unneeded includeBartosz Golaszewski1-1/+0
We no longer use any symbols from of_gpio.h. Remove this include. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11video: backlight: tosa: Use GPIO lookup tableArnd Bergmann3-12/+34
The driver should not require a machine specific header. Change it to pass the GPIO line through a lookup table, and move the timing generator definitions into the drivers itself. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Add auto string detection logicKiran Gunda1-6/+394
The auto string detection algorithm checks if the current WLED sink configuration is valid. It tries enabling every sink and checks if the OVP fault is observed. Based on this information it detects and enables the valid sink configuration. Auto calibration will be triggered when the OVP fault interrupts are seen frequently thereby it tries to fix the sink configuration. The auto-detection also kicks in when the connected LED string of the display-backlight malfunctions (because of damage) and requires the damaged string to be turned off to prevent the complete panel and/or board from being damaged. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Add support for short circuit handlingKiran Gunda1-4/+140
Handle the short circuit interrupt and check if the short circuit interrupt is valid. Re-enable the module to check if it goes away. Disable the module altogether if the short circuit event persists. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Add support for WLED4 peripheralKiran Gunda1-2/+253
WLED4 peripheral is present on some PMICs like pmi8998 and pm660l. It has a different register map and configurations are also different. Add support for it. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Restructure the driver for WLED3Kiran Gunda1-139/+234
Restructure the driver to add the support for new WLED peripherals. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Rename PM8941* to WLED3Kiran Gunda1-123/+125
Rename the PM8941* references as WLED3 to make the driver generic and have WLED support for other PMICs. Also rename "i_boost_limit" and "i_limit" variables to "boost_i_limit" and "string_i_limit" respectively to resemble the corresponding register names. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-01backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.cKiran Gunda3-5/+5
pm8941-wled.c driver is supporting the WLED peripheral on pm8941. Rename it to qcom-wled.c so that it can support WLED on multiple PMICs. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-18backlight: Kconfig: jornada720: Use CONFIG_PREEMPTIONThomas Gleixner1-2/+2
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the Kconfig dependency to CONFIG_PREEMPTION. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [Sebastian: +LCD_HP700] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Switch to power-of-2 base for fixed-point mathRasmus Villemoes1-10/+12
Using a power-of-2 instead of power-of-10 base makes the computations much cheaper. 2^16 is safe; retval never becomes more than 2^48 + 2^32/2. On a 32 bit platform, the very expensive 64/32 division at the end of cie1931() instead becomes essentially free (a shift by 32 is just a register rename). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Drop use of int_pow()Rasmus Villemoes1-1/+2
For a fixed small exponent of 3, it is more efficient to simply use two explicit multiplications rather than calling the int_pow() library function: Aside from the function call overhead, its implementation using repeated squaring means it ends up doing four 64x64 multiplications. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Eliminate a 64/32 divisionRasmus Villemoes1-1/+1
lightness*1000 is nowhere near overflowing 32 bits, so we can just use an ordinary 32/32 division, which is much cheaper than the 64/32 done via do_div(). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Fix cie1913 comments and constantRasmus Villemoes1-3/+9
The "break-even" point for the two formulas is L==8, which is also what the code actually implements. [Incidentally, at that point one has Y=0.008856, not 0.08856]. Moreover, all the sources I can find say the linear factor is 903.3 rather than 902.3, which makes sense since then the formulas agree at L==8, both yielding the 0.008856 figure to four significant digits. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Add missing curly branches in else branchMatthias Kaehlcke1-1/+2
Add curly braces to an 'else' branch in pwm_backlight_update_status() to match the corresponding 'if' branch. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-14backlight: pwm_bl: Don't assign levels table repeatedlyMatthias Kaehlcke1-4/+3
pwm_backlight_probe() re-assigns pb->levels for every brightness level. This is not needed and was likely not intended, since neither side of the assignment changes during the loop. Assign the field only once. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-02backlight: lm3630a: Add an enable gpio for the HWEN pinAndreas Kemnade1-0/+9
For now just enable it in the probe function to allow I2C access. Disabling also means resetting the register values to default and according to the datasheet does not give power savings. Tested on Kobo Clara HD. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-02backlight: ipaq_micro: Make structure micro_bl_props constantNishka Dasgupta1-1/+1
Static structure micro_bl_props, having type backlight_properties, is used only once, when it is passed as the last argument to function devm_backlight_device_register(). devm_backlight_device_register() is defined with its last parameter being declared constant. Hence make micro_bl_props itself constant as well. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-02backlight: lm3630a: Fix module aliasesAndreas Kemnade1-1/+3
Devicetree aliases are missing, so that module autoloading does not work properly. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-23Merge tag 'backlight-next-5.4' of ↵Linus Torvalds8-14/+84
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Core Frameworks - Obtain scale type through sysfs New Functionality: - Provide Device Tree functionality in rave-sp-backlight - Calculate if scale type is (non-)linear in pwm_bl Fix-ups: - Simplify code in lm3630a_bl - Trivial rename/whitespace/typo fixes in lms283gf05 - Remove superfluous NULL check in tosa_lcd - Fix power state initialisation in gpio_backlight - List supported file in MAINTAINERS Bug Fixes: - Kconfig - default to not building unless requested in {LED,BACKLIGHT}_CLASS_DEVICE" * tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Set scale type for brightness curves specified in the DT backlight: pwm_bl: Set scale type for CIE 1931 curves backlight: Expose brightness curve type through sysfs MAINTAINERS: Add entry for stable backlight sysfs ABI documentation backlight: gpio-backlight: Correct initial power state handling video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE} backlight: lms283gf05: Fix a typo in the description passed to 'devm_gpio_request_one()' backlight: lm3630a: Switch to use fwnode_property_count_uXX() backlight: rave-sp: Leave initial state and register with correct device
2019-09-02backlight: pwm_bl: Set scale type for brightness curves specified in the DTMatthias Kaehlcke1-0/+30
Check if a brightness curve specified in the device tree is linear or not and set the corresponding property accordingly. This makes the scale type available to userspace via the 'scale' sysfs attribute. To determine if a curve is linear it is compared to a interpolated linear curve between min and max brightness. The curve is considered linear if no value deviates more than +/-5% of ${brightness_range} from their interpolated value. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02backlight: pwm_bl: Set scale type for CIE 1931 curvesMatthias Kaehlcke1-1/+4
For backlight curves calculated with the CIE 1931 algorithm set the brightness scale type to non-linear. This makes the scale type available to userspace via the 'scale' sysfs attribute. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02backlight: Expose brightness curve type through sysfsMatthias Kaehlcke1-0/+19
Backlight brightness curves can have different shapes. The two main types are linear and non-linear curves. The human eye doesn't perceive linearly increasing/decreasing brightness as linear (see also 88ba95bedb79 "backlight: pwm_bl: Compute brightness of LED linearly to human eye"), hence many backlights use non-linear (often logarithmic) brightness curves. The type of curve currently is opaque to userspace, so userspace often uses more or less reliable heuristics (like the number of brightness levels) to decide whether to treat a backlight device as linear or non-linear. Export the type of the brightness curve via the new sysfs attribute 'scale'. The value of the attribute can be 'linear', 'non-linear' or 'unknown'. For devices that don't provide information about the scale of their brightness curve the value of the 'scale' attribute is 'unknown'. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02backlight: gpio-backlight: Correct initial power state handlingPeter Ujfalusi1-4/+20
The default-on property - or the def_value via legacy pdata) should be handled as: if it is 1, the backlight must be enabled (kept enabled) if it is 0, the backlight must be disabled (kept disabled) This only works for the case when default-on is set. If it is not set then the brightness of the backlight is set to 0. Now if the backlight is enabled by external driver (graphics) the backlight will stay disabled since the brightness is configured as 0. The backlight will not turn on. In order to minimize screen flickering during device boot: The initial brightness should be set to 1. If booted in non DT mode or no phandle link to the backlight node: follow the def_value/default-on to select UNBLANK or POWERDOWN If in DT boot we have phandle link then leave the GPIO in a state which the bootloader left it and let the user of the backlight to configure it further. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02video: backlight: tosa_lcd: drop check because i2c_unregister_device() is ↵Wolfram Sang1-2/+1
NULL safe No need to check the argument of i2c_unregister_device() because the function itself does it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}Geert Uytterhoeven1-2/+0
When running "make oldconfig" on a .config where CONFIG_BACKLIGHT_LCD_SUPPORT is not set, two new config options ("Lowlevel LCD controls" and "Lowlevel Backlight controls") appear, both defaulting to "m". Drop the "default m", as options should default to disabled, and because several driver config options already select LCD_CLASS_DEVICE or BACKLIGHT_CLASS_DEVICE when needed. Fixes: 8c5dc8d9f19c7992 ("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-12backlight: lms283gf05: Fix a typo in the description passed to ↵Christophe JAILLET1-1/+1
'devm_gpio_request_one()' The description passed to 'devm_gpio_request_one()' should be related to LMS283GF05, not LMS285GF05. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-12backlight: lm3630a: Switch to use fwnode_property_count_uXX()Andy Shevchenko1-2/+1
Use use fwnode_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-12backlight: rave-sp: Leave initial state and register with correct deviceLucas Stach1-2/+8
This way the backlight can be referenced through its device node and enabling/disabling can be managed through the panel driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-05backlight: drop EARLY_EVENT_BLANK supportSam Ravnborg1-8/+0
There was no users left - so drop the code to support EARLY_EVENT_BLANK. This patch removes the support in backlight, and drop the notifier in fbmem. That EARLY_EVENT_BLANK is not used can be verified that no driver set any of: lcd_ops.early_set_power() lcd_ops.r_early_set_power() Noticed while browsing backlight code for other reasons. v2: - Fix changelog to say "EARLY_EVENT_BLANK" (Daniel) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190725143224.GB31803@ravnborg.org
2019-07-16Merge tag 'backlight-next-5.3' of ↵Linus Torvalds2-36/+17
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Functionality: - Provide support for ACPI enumeration; gpio_backlight Fix-ups: - SPDX fixups; pwm_bl - Fix linear brightness levels to include number available; pwm_bl" * tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix heuristic to determine number of brightness levels backlight: gpio_backlight: Enable ACPI enumeration backlight: pwm_bl: Convert to use SPDX identifier
2019-07-09Merge tag 'fbdev-v5.3' of git://github.com/bzolnier/linuxLinus Torvalds2-13/+1
Pull fbdev updates from Bartlomiej Zolnierkiewicz: - remove fbdev notifier usage for fbcon (as prep work to clean up the fbcon locking), add locking checks in vt/console code and make assorted cleanups in fbdev and backlight code (Daniel Vetter) - add COMPILE_TEST support to atmel_lcdfb, da8xx-fb, gbefb, imxfb, pvr2fb and pxa168fb drivers (me) - fix DMA API abuse in au1200fb and jz4740_fb drivers (Christoph Hellwig) - add check for new BGRT status field rotation bits in efifb driver (Hans de Goede) - mark expected switch fall-throughs in s3c-fb driver (Gustavo A. R. Silva) - remove fbdev mxsfb driver in favour of the drm version (Fabio Estevam) - remove broken rfbi code from omap2fb driver (me) - misc fixes (Arnd Bergmann, Shobhit Kukreti, Wei Yongjun, me) - misc cleanups (Gustavo A. R. Silva, Colin Ian King, me) * tag 'fbdev-v5.3' of git://github.com/bzolnier/linux: (62 commits) video: fbdev: imxfb: fix a typo in imxfb_probe() video: fbdev: s3c-fb: Mark expected switch fall-throughs video: fbdev: s3c-fb: fix sparse warnings about using incorrect types video: fbdev: don't print error message on framebuffer_alloc() failure video: fbdev: intelfb: return -ENOMEM on framebuffer_alloc() failure video: fbdev: s3c-fb: return -ENOMEM on framebuffer_alloc() failure vga_switcheroo: Depend upon fbcon being built-in, if enabled video: fbdev: omap2: remove rfbi video: fbdev: atmel_lcdfb: remove redundant initialization to variable ret video: fbdev-MMP: Use struct_size() in devm_kzalloc() video: fbdev: controlfb: fix warnings about comparing pointer to 0 efifb: BGRT: Add check for new BGRT status field rotation bits jz4740_fb: fix DMA API abuse video: fbdev: pvr2fb: fix link error for pvr2fb_pci_exit video: fbdev: s3c-fb: add COMPILE_TEST support video: fbdev: imxfb: fix sparse warnings about using incorrect types video: fbdev: pvr2fb: fix build warning when compiling as module fbcon: Export fbcon_update_vcs backlight: simplify lcd notifier staging/olpc_dcon: Add drm conversion to TODO ...
2019-06-27backlight: pwm_bl: Fix heuristic to determine number of brightness levelsMatthias Kaehlcke1-18/+6
With commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") the number of set bits (aka hweight()) in the PWM period is used in the heuristic to determine the number of brightness levels, when the brightness table isn't specified in the DT. The number of set bits doesn't provide a reliable clue about the length of the period, instead change the heuristic to: nlevels = period / fls(period) Also limit the maximum number of brightness levels to 4096 to avoid excessively large tables. With this the number of levels increases monotonically with the PWM period, until the maximum of 4096 levels is reached: period (ns) # levels 100 16 500 62 1000 111 5000 416 10000 769 50000 3333 100000 4096 Fixes: 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27backlight: gpio_backlight: Enable ACPI enumerationAndy Shevchenko1-14/+9
ACPI allows to enumerate specific devices by using compatible strings. Enable that enumeration for GPIO based backlight devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27backlight: pwm_bl: Convert to use SPDX identifierAndy Shevchenko1-8/+3
Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. While here, correct MODULE_LICENSE() string to be aligned with license text. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner30-129/+30
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner2-24/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-13backlight: simplify lcd notifierDaniel Vetter1-11/+0
With all the work I've done on replacing fb notifier calls with direct calls into fbcon the backlight/lcd notifier is the only user left. It will only receive events now that it cares about, hence we can remove this check. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-34-daniel.vetter@ffwll.ch
2019-06-12fbcon: replace FB_EVENT_MODE_CHANGE/_ALL with direct callsDaniel Vetter1-1/+0
Create a new wrapper function for this, feels like there's some refactoring room here between the two modes. v2: backlight notifier is also interested in the mode change event, it calls lcd->set_mode, of which there are 3 implementations. Thanks to Maarten for spotting this. So we keep that. We can ditch the differentiation between mode change and all mode changes (because backlight notifier doesn't care), and we can drop the FBINFO_MISC_USEREVENT stuff too, because that's just to prevent recursion between fbmem.c and fbcon.c. While at it flatten the control flow a bit. v3: Need to add a static inline to the dummy function. v4: Add missing #include <fbcon.h> to sh_mob (Sam). Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-29-daniel.vetter@ffwll.ch
2019-06-12Revert "backlight/fbcon: Add FB_EVENT_CONBLANK"Daniel Vetter1-1/+1
This reverts commit 994efacdf9a087b52f71e620b58dfa526b0cf928. The justification is that if hw blanking fails (i.e. fbops->fb_blank) fails, then we still want to shut down the backlight. Which is exactly _not_ what fb_blank() does and so rather inconsistent if we end up with different behaviour between fbcon and direct fbdev usage. Given that the entire notifier maze is getting in the way anyway I figured it's simplest to revert this not well justified commit. v2: Add static inline to the dummy version. Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-25-daniel.vetter@ffwll.ch
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 332Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as publishhed by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 48 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.292339952@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 257Thomas Gleixner1-1/+1
Based on 1 normalized pattern(s): gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 19 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141333.108140152@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 154Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this package is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this package is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this package if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.930071175@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 12:22:37 +0000