summaryrefslogtreecommitdiffstats
path: root/drivers/vhost
AgeCommit message (Collapse)AuthorFilesLines
2022-03-31Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-7/+47
Pull virtio updates from Michael Tsirkin: - vdpa generic device type support - more virtio hardening for broken devices (but on the same theme, revert some virtio hotplug hardening patches - they were misusing some interrupt flags and had to be reverted) - RSS support in virtio-net - max device MTU support in mlx5 vdpa - akcipher support in virtio-crypto - shared IRQ support in ifcvf vdpa - a minor performance improvement in vhost - enable virtio mem for ARM64 - beginnings of advance dma support - cleanups, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits) vdpa/mlx5: Avoid processing works if workqueue was destroyed vhost: handle error while adding split ranges to iotlb vdpa: support exposing the count of vqs to userspace vdpa: change the type of nvqs to u32 vdpa: support exposing the config size to userspace vdpa/mlx5: re-create forwarding rules after mac modified virtio: pci: check bar values read from virtio config space Revert "virtio_pci: harden MSI-X interrupts" Revert "virtio-pci: harden INTX interrupts" drivers/net/virtio_net: Added RSS hash report control. drivers/net/virtio_net: Added RSS hash report. drivers/net/virtio_net: Added basic RSS support. drivers/net/virtio_net: Fixed padded vheader to use v1 with hash. virtio: use virtio_device_ready() in virtio_device_restore() tools/virtio: compile with -pthread tools/virtio: fix after premapped buf support virtio_ring: remove flags check for unmap packed indirect desc virtio_ring: remove flags check for unmap split indirect desc virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed() net/mlx5: Add support for configuring max device MTU ...
2022-03-28vhost: handle error while adding split ranges to iotlbAnirudh Rayabharam1-1/+5
vhost_iotlb_add_range_ctx() handles the range [0, ULONG_MAX] by splitting it into two ranges and adding them separately. The return value of adding the first range to the iotlb is currently ignored. Check the return value and bail out in case of an error. Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20220312141121.4981-1-mail@anirudhrb.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: support exposing the count of vqs to userspaceLongpeng1-0/+13
- GET_VQS_COUNT: the count of virtqueues that exposed Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-4-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng &lt;<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>&gt;<br> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: change the type of nvqs to u32Longpeng1-4/+6
Change vdpa_device.nvqs and vhost_vdpa.nvqs to use u32 Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-3-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng &lt;<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>&gt;<br></blockquote><div><br></div><div>Acked-by: Jason Wang &lt;<a href="mailto:jasowang@redhat.com">jasowang@redhat.com</a>&gt;</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: support exposing the config size to userspaceLongpeng1-0/+17
- GET_CONFIG_SIZE: return the size of the virtio config space. The size contains the fields which are conditional on feature bits. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-2-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vhost_vdpa: don't setup irq offloading when irq_num < 0Zhu Lingshan1-1/+4
When irq number is negative(e.g., -EINVAL), the virtqueue may be disabled or the virtqueues are sharing a device irq. In such case, we should not setup irq offloading for a virtqueue. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Link: https://lore.kernel.org/r/20220222115428.998334-3-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28vhost: cache avail index in vhost_enable_notify()Stefano Garzarella1-1/+2
In vhost_enable_notify() we enable the notifications and we read the avail index to check if new buffers have become available in the meantime. We are not caching the avail index, so when the device will call vhost_get_vq_desc(), it will find the old value in the cache and it will read the avail index again. It would be better to refresh the cache every time we read avail index, so let's change vhost_enable_notify() caching the value in `avail_idx` and compare it with `last_avail_idx` to check if there are new buffers available. We don't expect a significant performance boost because the above path is not very common, indeed vhost_enable_notify() is often called with unlikely(), expecting that avail index has not been updated. We ran virtio-test/vhost-test and noticed minimal improvement as expected. To stress the patch more, we modified vhost_test.ko to call vhost_enable_notify()/vhost_disable_notify() on every cycle when calling vhost_get_vq_desc(); in this case we observed a more evident improvement, with a reduction of the test execution time of about 3.7%. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220121153108.187291-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+5
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17Merge tag 'net-5.17-final' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, ipsec, and wireless. A few last minute revert / disable and fix patches came down from our sub-trees. We're not waiting for any fixes at this point. Current release - regressions: - Revert "netfilter: nat: force port remap to prevent shadowing well-known ports", restore working conntrack on asymmetric paths - Revert "ath10k: drop beacon and probe response which leak from other channel", restore working AP and mesh mode on QCA9984 - eth: intel: fix hang during reboot/shutdown Current release - new code bugs: - netfilter: nf_tables: disable register tracking, it needs more work to cover all corner cases Previous releases - regressions: - ipv6: fix skb_over_panic in __ip6_append_data when (admin-only) extension headers get specified - esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return value more selectively - bnx2x: fix driver load failure when FW not present in initrd Previous releases - always broken: - vsock: stop destroying unrelated sockets in nested virtualization - packet: fix slab-out-of-bounds access in packet_recvmsg() Misc: - add Paolo Abeni to networking maintainers!" * tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (26 commits) iavf: Fix hang during reboot/shutdown net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload net: bcmgenet: skip invalid partial checksums bnx2x: fix built-in kernel driver load failure net: phy: mscc: Add MODULE_FIRMWARE macros net: dsa: Add missing of_node_put() in dsa_port_parse_of net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit() Revert "ath10k: drop beacon and probe response which leak from other channel" hv_netvsc: Add check for kvmalloc_array iavf: Fix double free in iavf_reset_task ice: destroy flow director filter mutex after releasing VSIs ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats() Add Paolo Abeni to networking maintainers atm: eni: Add check for dma_map_single net/packet: fix slab-out-of-bounds access in packet_recvmsg() net: mdio: mscc-miim: fix duplicate debugfs entry net: phy: marvell: Fix invalid comparison in the resume and suspend functions esp6: fix check on ipv6_skip_exthdr's return value net: dsa: microchip: add spi_device_id tables netfilter: nf_tables: disable register tracking ...
2022-03-11vsock: each transport cycles only on its own socketsJiyong Park1-1/+2
When iterating over sockets using vsock_for_each_connected_socket, make sure that a transport filters out sockets that don't belong to the transport. There actually was an issue caused by this; in a nested VM configuration, destroying the nested VM (which often involves the closing of /dev/vhost-vsock if there was h2g connections to the nested VM) kills not only the h2g connections, but also all existing g2h connections to the (outmost) host which are totally unrelated. Tested: Executed the following steps on Cuttlefish (Android running on a VM) [1]: (1) Enter into an `adb shell` session - to have a g2h connection inside the VM, (2) open and then close /dev/vhost-vsock by `exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb session is not reset. [1] https://android.googlesource.com/device/google/cuttlefish/ Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jiyong Park <jiyong@google.com> Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-3/+19
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10vhost: allow batching hint without sizeJason Wang1-1/+3
Commit e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") tries to reject the IOTLB message whose size is zero. But the size is not necessarily meaningful, one example is the batching hint, so the commit breaks that. Fixing this be reject zero size message only if the message is used to update/invalidate the IOTLB. Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") Reported-by: Eli Cohen <elic@nvidia.com> Cc: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220310075211.4801-1-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eli Cohen <elic@nvidia.com>
2022-03-06vhost: remove avail_event arg from vhost_update_avail_event()Stefano Garzarella1-2/+2
In vhost_update_avail_event() we never used the `avail_event` argument, since its introduction in commit 2723feaa8ec6 ("vhost: set log when updating used flags or avail event"). Let's remove it to clean up the code. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220113141134.186773-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06vhost: fix hung thread due to erroneous iotlb entriesAnirudh Rayabharam2-0/+16
In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at: https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries. Fixes: 0bbe30668d89e ("vhost: factor out IOTLB") Reported-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com Tested-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20220305095525.5145-1-mail@anirudhrb.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-04vdpa: factor out vdpa_set_features_unlocked for vdpa internal useSi-Wei Liu1-1/+1
No functional change introduced. vdpa bus driver such as virtio_vdpa or vhost_vdpa is not supposed to take care of the locking for core by its own. The locked API vdpa_set_features should suffice the bus driver's need. Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/1642206481-30721-2-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-03-02tuntap: add sanity checks about msg_controllen in sendmsgHarold Huang1-0/+1
In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to tun_sendmsg. Although we donot use msg_controllen in this path, we should check msg_controllen to make sure the caller pass a valid msg_ctl. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fe8dd45bb7556246c6b76277b1ba4296c91c2505 Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Harold Huang <baymaxhuang@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220303022441.383865-1-baymaxhuang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23vhost/vsock: don't check owner in vhost_vsock_stop() while releasingStefano Garzarella1-7/+14
vhost_vsock_stop() calls vhost_dev_check_owner() to check the device ownership. It expects current->mm to be valid. vhost_vsock_stop() is also called by vhost_vsock_dev_release() when the user has not done close(), so when we are in do_exit(). In this case current->mm is invalid and we're releasing the device, so we should clean it anyway. Let's check the owner only when vhost_vsock_stop() is called by an ioctl. When invoked from release we can not fail so we don't check return code of vhost_vsock_stop(). We need to stop vsock even if it's not the owner. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-14vdpa: Protect vdpa reset with cf_mutexEli Cohen1-1/+1
Call reset using the wrapper function vdpa_reset() to make sure the operation is serialized with cf_mutex. This comes to protect from the following possible scenario: vhost_vdpa_set_status() could call the reset op. Since the call is not protected by cf_mutex, a netlink thread calling vdpa_dev_config_fill could get passed the VIRTIO_CONFIG_S_FEATURES_OK check in vdpa_dev_config_fill() and end up reporting wrong features. Fixes: 5f6e85953d8f ("vdpa: Read device configuration only if FEATURES_OK") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220111183400.38418-3-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa: Avoid taking cf_mutex lock on get statusEli Cohen1-2/+3
Avoid the wrapper holding cf_mutex since it is not protecting anything. To avoid confusion and unnecessary overhead incurred by it, remove. Fixes: f489f27bc0ab ("vdpa: Sync calls set/get config/status with cf_mutex") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220111183400.38418-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa: Allow to configure max data virtqueuesEli Cohen1-1/+1
Add netlink support to configure the max virtqueue pairs for a device. At least one pair is required. The maximum is dictated by the device. Example: $ vdpa dev add name vdpa-a mgmtdev auxiliary/mlx5_core.sf.1 max_vqp 4 Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-6-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vdpa: Sync calls set/get config/status with cf_mutexEli Cohen1-4/+3
Add wrappers to get/set status and protect these operations with cf_mutex to serialize these operations with respect to get/set config operations. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-4-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vdpa: Provide interface to read driver featuresEli Cohen1-1/+1
Provide an interface to read the negotiated features. This is needed when building the netlink message in vdpa_dev_net_config_fill(). Also fix the implementation of vdpa_dev_net_config_fill() to use the negotiated features instead of the device features. To make APIs clearer, make the following name changes to struct vdpa_config_ops so they better describe their operations: get_features -> get_device_features set_features -> set_driver_features Finally, add get_driver_features to return the negotiated features and add implementation to all the upstream drivers. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vdpa: clean up get_config_size ret value handlingLaura Abbott1-1/+1
The return type of get_config_size is size_t so it makes sense to change the type of the variable holding its result. That said, this already got taken care of (differently, and arguably not as well) by commit 3ed21c1451a1 ("vdpa: check that offsets are within bounds"). The added 'c->off > size' test in that commit will be done as an unsigned comparison on 32-bit (safe due to not being signed). On a 64-bit platform, it will be done as a signed comparison, but in that case the comparison will be done in 64-bit, and 'c->off' being an u32 it will be valid thanks to the extended range (ie both values will be positive in 64 bits). So this was a real bug, but it was already addressed and marked for stable. Signed-off-by: Laura Abbott <labbott@kernel.org> Reported-by: Luo Likang <luolikang@nsfocus.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vhost/test: fix memory leak of vhost virtqueuesXianting Tian1-0/+1
We need free the vqs in .release(), which are allocated in .open(). Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20211228030924.3468439-1-xianting.tian@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa: Avoid duplicate call to vp_vdpa get_statusEugenio Pérez1-1/+1
It has no sense to call get_status twice, since we already have a variable for that. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Link: https://lore.kernel.org/r/20211104195833.2089796-1-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-12-08vdpa: check that offsets are within boundsDan Carpenter1-1/+1
In this function "c->off" is a u32 and "size" is a long. On 64bit systems if "c->off" is greater than "size" then "size - c->off" is a negative and we always return -E2BIG. But on 32bit systems the subtraction is type promoted to a high positive u32 value and basically any "c->len" is accepted. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Reported-by: Xie Yongji <xieyongji@bytedance.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211208103337.GA4047@kili Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org
2021-11-24vhost-vdpa: clean irqs before reseting vdpa deviceWu Zongyong1-1/+1
Vdpa devices should be reset after unseting irqs of virtqueues, or we will get errors when killing qemu process: >> pi_update_irte: failed to update PI IRTE >> irq bypass consumer (token 0000000065102a43) unregistration fails: -22 Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/a2cb60cf73be9da5c4e6399242117d8818f975ae.1636946171.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-24vhost/vsock: cleanup removing `len` variableStefano Garzarella1-5/+1
We can increment `total_len` directly and remove `len` since it is no longer used for vhost_add_used(). Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211122163525.294024-3-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-11-24vhost/vsock: fix incorrect used length reported to the guestStefano Garzarella1-1/+1
The "used length" reported by calling vhost_add_used() must be the number of bytes written by the device (using "in" buffers). In vhost_vsock_handle_tx_kick() the device only reads the guest buffers (they are all "out" buffers), without writing anything, so we must pass 0 as "used length" to comply virtio spec. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: Halil Pasic <pasic@linux.ibm.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211122163525.294024-2-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
2021-11-01vdpa: Introduce and use vdpa device get, set config helpersParav Pandit1-2/+1
Subsequent patches enable get and set configuration either via management device or via vdpa device' config ops. This requires synchronization between multiple callers to get and set config callbacks. Features setting also influence the layout of the configuration fields endianness. To avoid exposing synchronization primitives to callers, introduce helper for setting the configuration and use it. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-2-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-17Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-5/+5
Pull virtio fixes from Michael Tsirkin: "Fixes up some issues in rc5" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-vdpa: Fix the wrong input in config_cb VDUSE: fix documentation underline warning Revert "virtio-blk: Add validation for block size in config space" vhost_vdpa: unset vq irq before freeing irq virtio: write back F_VERSION_1 before validate
2021-10-13vhost-vdpa: Fix the wrong input in config_cbCindy Lu1-1/+1
Fix the wrong input in for config_cb. In function vhost_vdpa_config_cb, the input cb.private was used as struct vhost_vdpa, so the input was wrong here, fix this issue Fixes: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Signed-off-by: Cindy Lu <lulu@redhat.com> Link: https://lore.kernel.org/r/20210929090933.20465-1-lulu@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-13vhost_vdpa: unset vq irq before freeing irqWu Zongyong1-4/+4
Currently we unset vq irq after freeing irq and that will result in error messages: pi_update_irte: failed to update PI IRTE irq bypass consumer (token 000000005a07a12b) unregistration fails: -22 This patch solves this. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/02637d38dcf4e4b836c5b3a65055fe92bf812b3b.1631687872.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-09-28Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+1
Pull virtio/vdpa fixes from Michael Tsirkin: "Fixes up some issues in rc1" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa: potential uninitialized return in vhost_vdpa_va_map() vdpa/mlx5: Avoid executing set_vq_ready() if device is reset vdpa/mlx5: Clear ready indication for control VQ vduse: Cleanup the old kernel states after reset failure vduse: missing error code in vduse_init() virtio: don't fail on !of_device_is_compatible
2021-09-16Merge tag 'net-5.15-rc2' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - vhost_net: fix OoB on sendmsg() failure - mlx5: bridge, fix uninitialized variable usage - bnxt_en: fix error recovery regression Current release - new code bugs: - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset() Previous releases - regressions: - r6040: restore MDIO clock frequency after MAC reset - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() - dsa: flush switchdev workqueue before tearing down CPU/DSA ports Previous releases - always broken: - ptp: dp83640: don't define PAGE0, avoid compiler warning - igc: fix tunnel segmentation offloads - phylink: update SFP selected interface on advertising changes - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume - mlx5e: fix mutual exclusion between CQE compression and HW TS Misc: - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode - sfc: fallback for lack of xdp tx queues - hns3: add option to turn off page pool feature" * tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) mlxbf_gige: clear valid_polarity upon open igc: fix tunnel offloading net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert net: wan: wanxl: define CROSS_COMPILE_M68K selftests: nci: replace unsigned int with int net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Revert "net: phy: Uniform PHY driver access" net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup ptp: dp83640: don't define PAGE0 bnx2x: Fix enabling network interfaces without VFs Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"" tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() net-caif: avoid user-triggerable WARN_ON(1) bpf, selftests: Add test case for mixed cgroup v1/v2 bpf, selftests: Add cgroup v1 net_cls classid helpers bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode bpf: Add oversize check before call kvcalloc() net: hns3: fix the timing issue of VF clearing interrupt sources net: hns3: fix the exception when query imp info net: hns3: disable mac in flr process ...
2021-09-14vdpa: potential uninitialized return in vhost_vdpa_va_map()Dan Carpenter1-1/+1
The concern here is that "ret" can be uninitialized if we hit the "goto next" condition on every iteration through the loop. Fixes: 41ba1b5f9d4b ("vdpa: Support transferring virtual addressing during DMA mapping") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210907073253.GB18254@kili Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-09-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-73/+177
Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ...
2021-09-09vhost_net: fix OoB on sendmsg() failure.Paolo Abeni1-1/+10
If the sendmsg() call in vhost_tx_batch() fails, both the 'batched_xdp' and 'done_idx' indexes are left unchanged. If such failure happens when batched_xdp == VHOST_NET_BATCH, the next call to vhost_net_build_xdp() will access and write memory outside the xdp buffers area. Since sendmsg() can only error with EBADFD, this change addresses the issue explicitly freeing the XDP buffers batch on error. Fixes: 0a0be13b8fe2 ("vhost_net: batch submitting XDP buffers to underlayer sockets") Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06vdpa: Support transferring virtual addressing during DMA mappingXie Yongji1-11/+88
This patch introduces an attribute for vDPA device to indicate whether virtual address can be used. If vDPA device driver set it, vhost-vdpa bus driver will not pin user page and transfer userspace virtual address instead of physical address during DMA mapping. And corresponding vma->vm_file and offset will be also passed as an opaque pointer. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()Xie Yongji1-20/+35
The upcoming patch is going to support VA mapping/unmapping. So let's factor out the logic of PA mapping/unmapping firstly to make the code more readable. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-10-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()Xie Yongji1-1/+1
Add an opaque pointer for DMA mapping. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-9-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vhost-iotlb: Add an opaque pointer for vhost IOTLBXie Yongji1-4/+16
Add an opaque pointer for vhost IOTLB. And introduce vhost_iotlb_add_range_ctx() to accept it. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-8-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vhost-vdpa: Handle the failure of vdpa_reset()Xie Yongji1-3/+6
The vdpa_reset() may fail now. This adds check to its return value and fail the vhost_vdpa_open(). Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-7-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vdpa: Add reset callback in vdpa_config_opsXie Yongji1-2/+7
This adds a new callback to support device specific reset behavior. The vdpa bus driver will call the reset function instead of setting status to zero during resetting. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20210831103634.33-6-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macroCai Huoqing1-12/+12
it's a nice refactor to make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210802013717.851-1-caihuoqing@baidu.com Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-05vhost/vsock: support MSG_EOR bit processingArseny Krasnov1-9/+13
'MSG_EOR' handling has similar logic as 'MSG_EOM' - if bit present in packet's header, reset it to 0. Then restore it back if packet processing wasn't completed. Instead of bool variable for each flag, bit mask variable was added: it has logical OR of 'MSG_EOR' and 'MSG_EOM' if needed, to restore flags, this variable is ORed with flags field of packet. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Link: https://lore.kernel.org/r/20210903123238.3273526-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-09-05virtio/vsock: rename 'EOR' to 'EOM' bit.Arseny Krasnov1-6/+6
This current implemented bit is used to mark end of messages ('EOM' - end of message), not records('EOR' - end of record). Also rename 'record' to 'message' in implementation as it is different things. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123109.3273053-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-05vhost scsi: Convert to SPDX identifierCai Huoqing1-13/+1
use SPDX-License-Identifier instead of a verbose license text Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210821123320.734-1-caihuoqing@baidu.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-08-26sock: remove one redundant SKB_FRAG_PAGE_ORDER macroYunsheng Lin1-2/+0
Both SKB_FRAG_PAGE_ORDER are defined to the same value in net/core/sock.c and drivers/vhost/net.c. Move the SKB_FRAG_PAGE_ORDER definition to net/core/sock.h, as both net/core/sock.c and drivers/vhost/net.c include it, and it seems a reasonable file to put the macro. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11vringh: Use wiov->used to check for read/write desc orderNeeraj Upadhyay1-1/+1
As __vringh_iov() traverses a descriptor chain, it populates each descriptor entry into either read or write vring iov and increments that iov's ->used member. So, as we iterate over a descriptor chain, at any point, (riov/wriov)->used value gives the number of descriptor enteries available, which are to be read or written by the device. As all read iovs must precede the write iovs, wiov->used should be zero when we are traversing a read descriptor. Current code checks for wiov->i, to figure out whether any previous entry in the current descriptor chain was a write descriptor. However, iov->i is only incremented, when these vring iovs are consumed, at a later point, and remain 0 in __vringh_iov(). So, correct the check for read and write descriptor order, to use wiov->used. Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Link: https://lore.kernel.org/r/1624591502-4827-1-git-send-email-neeraju@codeaurora.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 12:27:36 +0000