summaryrefslogtreecommitdiffstats
path: root/drivers/vhost
AgeCommit message (Collapse)AuthorFilesLines
2022-08-12Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-48/+153
Pull virtio updates from Michael Tsirkin: - A huge patchset supporting vq resize using the new vq reset capability - Features, fixes, and cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits) vdpa/mlx5: Fix possible uninitialized return value vdpa_sim_blk: add support for discard and write-zeroes vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests vdpa_sim_blk: check if sector is 0 for commands other than read or write vdpa_sim: Implement suspend vdpa op vhost-vdpa: uAPI to suspend the device vhost-vdpa: introduce SUSPEND backend feature bit vdpa: Add suspend operation virtio-blk: Avoid use-after-free on suspend/resume virtio_vdpa: support the arg sizes of find_vqs() vhost-vdpa: Call ida_simple_remove() when failed vDPA: fix 'cast to restricted le16' warnings in vdpa.c vDPA: !FEATURES_OK should not block querying device config space vDPA/ifcvf: support userspace to query features and MQ of a management device vDPA/ifcvf: get_config_size should return a value no greater than dev implementation vhost scsi: Allow user to control num virtqueues vhost-scsi: Fix max number of virtqueues vdpa/mlx5: Support different address spaces for control and data vdpa/mlx5: Implement susupend virtqueue callback ...
2022-08-11vhost-vdpa: uAPI to suspend the deviceEugenio Pérez1-0/+19
The ioctl adds support for suspending the device from userspace. This is a must before getting virtqueue indexes (base) for live migration, since the device could modify them after userland gets them. There are individual ways to perform that action for some devices (VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there was no way to perform it for any vhost device (and, in particular, vhost-vdpa). After a successful return of the ioctl call the device must not process more virtqueue descriptors. The device can answer to read or writes of config fields as if it were not suspended. In particular, writing to "queue_enable" with a value of 1 will not make the device start processing buffers of the virtqueue. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20220810171512.2343333-4-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vhost-vdpa: introduce SUSPEND backend feature bitEugenio Pérez1-1/+15
Userland knows if it can suspend the device or not by checking this feature bit. It's only offered if the vdpa driver backend implements the suspend() operation callback, and to offer it or userland to ack it if the backend does not offer that callback is an error. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20220810171512.2343333-3-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vhost-vdpa: Call ida_simple_remove() when failedBo Liu1-0/+1
In function vhost_vdpa_probe(), when code execution fails, we should call ida_simple_remove() to free ida. Signed-off-by: Bo Liu <liubo03@inspur.com> Message-Id: <20220805091254.20026-1-liubo03@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11vhost scsi: Allow user to control num virtqueuesMike Christie1-24/+61
We are currently hard coded to always create 128 IO virtqueues, so this adds a modparam to control it. For large systems where we are ok with using memory for virtqueues it allows us to add up to 1024. This limit was just selected becuase that's qemu's limit. Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20220708030525.5065-3-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vhost-scsi: Fix max number of virtqueuesMike Christie1-1/+1
Qemu takes it's num_queues limit then adds the fixed queues (control and event) to the total it will request from the kernel. So when a user requests 128 (or qemu does it's num_queues calculation based on vCPUS and other system limits), we hit errors due to userspace trying to setup 130 queues when vhost-scsi has a hard coded limit of 128. This has vhost-scsi adjust it's max so we can do a total of 130 virtqueues (128 IO and 2 fixed). For the case where the user has 128 vCPUs the guest OS can then nicely map each IO virtqueue to a vCPU and not have the odd case where 2 vCPUs share a virtqueue. Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20220708030525.5065-2-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vdpa: Use device_iommu_capable()Robin Murphy1-1/+1
Use the new interface to check the capability for our device specifically. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Message-Id: <548e316fa282ce513fabb991a4c4d92258062eb5.1654688822.git.robin.murphy@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11vringh: iterate on iotlb_translate to handle large translationsStefano Garzarella1-22/+56
iotlb_translate() can return -ENOBUFS if the bio_vec is not big enough to contain all the ranges for translation. This can happen for example if the VMM maps a large bounce buffer, without using hugepages, that requires more than 16 ranges to translate the addresses. To handle this case, let's extend iotlb_translate() to also return the number of bytes successfully translated. In copy_from_iotlb()/copy_to_iotlb() loops by calling iotlb_translate() several times until we complete the translation. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220624075656.13997-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-08iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()Al Viro1-3/+1
Most of the users immediately follow successful iov_iter_get_pages() with advancing by the amount it had returned. Provide inline wrappers doing that, convert trivial open-coded uses of those. BTW, iov_iter_get_pages() never returns more than it had been asked to; such checks in cifs ought to be removed someday... Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-27vhost-vdpa: call vhost_vdpa_cleanup during the releaseStefano Garzarella1-1/+1
Before commit 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") we call vhost_vdpa_iotlb_free() during the release to clean all regions mapped in the iotlb. That commit removed vhost_vdpa_iotlb_free() and added vhost_vdpa_cleanup() to do some cleanup, including deleting all mappings, but we forgot to call it in vhost_vdpa_release(). This causes that if an application does not remove all mappings explicitly (or it crashes), the mappings remain in the iotlb and subsequent applications may fail if they map the same addresses. Calling vhost_vdpa_cleanup() also fixes a memory leak since we are not freeing `v->vdev.vqs` during the release from the same commit. Since vhost_vdpa_cleanup() calls vhost_dev_cleanup() we can remove its call from vhost_vdpa_release(). Fixes: 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") Cc: gautam.dawar@xilinx.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220622151407.51232-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-06-09vdpa: make get_vq_group and set_group_asid optionalJason Wang1-0/+2
This patch makes get_vq_group and set_group_asid optional. This is needed to unbreak the vDPA parent that doesn't support multiple address spaces. Cc: Gautam Dawar <gautam.dawar@xilinx.com> Fixes: aaca8373c4b1 ("vhost-vdpa: support ASID based IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220609041901.2029-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-08vringh: Fix loop descriptors check in the indirect casesXie Yongji1-2/+8
We should use size of descriptor chain to test loop condition in the indirect case. And another statistical count is also introduced for indirect descriptors to avoid conflict with the statistical count of direct descriptors. Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.") Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Signed-off-by: Fam Zheng <fam.zheng@bytedance.com> Message-Id: <20220505100910.137-1-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-05-31vhost: rename vhost_work_dev_flushMike Christie6-11/+11
This patch renames vhost_work_dev_flush to just vhost_dev_flush to relfect that it flushes everything on the device and that drivers don't know/care that polls are based on vhost_works. Drivers just flush the entire device and polls, and works for vhost-scsi management TMFs and IO net virtqueues, etc all are flushed. Signed-off-by: Mike Christie <michael.christie@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220517180850.198915-9-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-test: drop flush after vhost_dev_cleanupMike Christie1-3/+0
The flush after vhost_dev_cleanup is not needed because: 1. It doesn't do anything. vhost_dev_cleanup will stop the worker thread so the flush call will just return since the worker has not device. 2. It's not needed. The comment about jobs re-queueing themselves does not look correct because handle_vq does not requeue work. Signed-off-by: Mike Christie <michael.christie@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220517180850.198915-8-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-scsi: drop flush after vhost_dev_cleanupMike Christie1-2/+0
The flush after vhost_dev_cleanup is not needed because: 1. It doesn't do anything. vhost_dev_cleanup will stop the worker thread so the flush call will just return since the worker has not device. 2. It's not needed for the re-queue case. vhost_scsi_evt_handle_kick grabs the mutex and if the backend is NULL will return without queueing a work. vhost_scsi_clear_endpoint will set the backend to NULL under the vq->mutex then drops the mutex and does a flush. So we know when vhost_scsi_clear_endpoint has dropped the mutex after clearing the backend no evt related work will be able to requeue. The flush would then make sure any queued evts are run and return. Signed-off-by: Mike Christie <michael.christie@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220517180850.198915-7-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost_vsock: simplify vhost_vsock_flush()Andrey Ryabinin1-5/+0
vhost_vsock_flush() calls vhost_work_dev_flush(vsock->vqs[i].poll.dev) before vhost_work_dev_flush(&vsock->dev). This seems pointless as vsock->vqs[i].poll.dev is the same as &vsock->dev and several flushes in a row doesn't do anything useful, one is just enough. Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220517180850.198915-6-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost_test: remove vhost_test_flush_vq()Andrey Ryabinin1-8/+3
vhost_test_flush_vq() just a simple wrapper around vhost_work_dev_flush() which seems have no value. It's just easier to call vhost_work_dev_flush() directly. Besides there is no point in obtaining vhost_dev pointer via 'n->vqs[index].poll.dev' while we can just use &n->dev. It's the same pointers, see vhost_test_open()/vhost_dev_init(). Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220517180850.198915-5-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-05-31vhost_net: get rid of vhost_net_flush_vq() and extra flush callsAndrey Ryabinin1-9/+2
vhost_net_flush_vq() calls vhost_work_dev_flush() twice passing vhost_dev pointer obtained via 'n->poll[index].dev' and 'n->vqs[index].vq.poll.dev'. This is actually the same pointer, initialized in vhost_net_open()/vhost_dev_init()/vhost_poll_init() Remove vhost_net_flush_vq() and call vhost_work_dev_flush() directly. Do the flushes only once instead of several flush calls in a row which seems rather useless. Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> [drop vhost_dev forward declaration in vhost.h] Signed-off-by: Mike Christie <michael.christie@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220517180850.198915-4-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost: flush dev once during vhost_dev_stopMike Christie1-3/+3
When vhost_work_dev_flush returns all work queued at that time will have completed. There is then no need to flush after every vhost_poll_stop call, and we can move the flush call to after the loop that stops the pollers. Signed-off-by: Mike Christie <michael.christie@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220517180850.198915-3-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost: get rid of vhost_poll_flush() wrapperAndrey Ryabinin5-15/+6
vhost_poll_flush() is a simple wrapper around vhost_work_dev_flush(). It gives wrong impression that we are doing some work over vhost_poll, while in fact it flushes vhost_poll->dev. It only complicate understanding of the code and leads to mistakes like flushing the same vhost_dev several times in a row. Just remove vhost_poll_flush() and call vhost_work_dev_flush() directly. Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> [merge vhost_poll_flush removal from Stefano Garzarella] Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220517180850.198915-2-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-vdpa: return -EFAULT on copy_to_user() failureDan Carpenter1-3/+5
The copy_to_user() function returns the number of bytes remaining to be copied. However, we need to return a negative error code, -EFAULT, to the user. Fixes: 87f4c217413a ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups") Fixes: e96ef636f154 ("vhost-vdpa: introduce uAPI to get the number of address spaces") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <YotG1vXKXXSayr63@kili> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-05-31vhost-vdpa: support ASID based IOTLB APIGautam Dawar2-20/+93
This patch extends the vhost-vdpa to support ASID based IOTLB API. The vhost-vdpa device will allocated multiple IOTLBs for vDPA device that supports multiple address spaces. The IOTLBs and vDPA device memory mappings is determined and maintained through ASID. Note that we still don't support vDPA device with more than one address spaces that depends on platform IOMMU. This work will be done by moving the IOMMU logic from vhost-vDPA to vDPA device driver. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-16-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Includes fixup: vhost-vdpa: Fix some error handling path in vhost_vdpa_process_iotlb_msg() In the error paths introduced by the original patch, a mutex may be left locked. Add the correct goto instead of a direct return. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Message-Id: <89ef0ae4c26ac3cfa440c71e97e392dcb328ac1b.1653227924.git.christophe.jaillet@wanadoo.fr> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-vdpa: introduce uAPI to set group ASIDGautam Dawar1-0/+8
Follows the vDPA support for associating ASID to a specific virtqueue group. This patch adds a uAPI to support setting them from userspace. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-15-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-vdpa: uAPI to get virtqueue group idGautam Dawar1-0/+8
Follows the support for virtqueue group in vDPA. This patches introduces uAPI to get the virtqueue group ID for a specific virtqueue in vhost-vdpa. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-14-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-vdpa: introduce uAPI to get the number of address spacesGautam Dawar1-0/+3
This patch introduces the uAPI for getting the number of address spaces supported by this vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-13-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-vdpa: introduce uAPI to get the number of virtqueue groupsGautam Dawar1-0/+4
Follows the vDPA support for multiple address spaces, this patch introduce uAPI for the userspace to know the number of virtqueue groups supported by the vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-12-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-vdpa: introduce asid based IOTLBGautam Dawar1-25/+72
This patch converts the vhost-vDPA device to support multiple IOTLBs tagged via ASID via hlist. This will be used for supporting multiple address spaces in the following patches. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-11-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost: support ASID in IOTLB APIGautam Dawar3-8/+24
This patches allows userspace to send ASID based IOTLB message to vhost. This idea is to use the reserved u32 field in the existing V2 IOTLB message. Vhost device should advertise this capability via VHOST_BACKEND_F_IOTLB_ASID backend feature. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-10-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost_iotlb: split out IOTLB initializationGautam Dawar1-5/+18
This patch splits out IOTLB initialization to make sure it could be reused by external modules. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-9-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vdpa: multiple address spaces supportGautam Dawar1-5/+9
This patches introduces the multiple address spaces support for vDPA device. This idea is to identify a specific address space via an dedicated identifier - ASID. During vDPA device allocation, vDPA device driver needs to report the number of address spaces supported by the device then the DMA mapping ops of the vDPA device needs to be extended to support ASID. This helps to isolate the environments for the virtqueue that will not be assigned directly. E.g in the case of virtio-net, the control virtqueue will not be assigned directly to guest. As a start, simply claim 1 virtqueue groups and 1 address spaces for all vDPA devices. And vhost-vDPA will simply reject the device with more than 1 virtqueue groups or address spaces. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-7-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-vdpa: switch to use vhost-vdpa specific IOTLBGautam Dawar1-8/+10
To ease the implementation of per group ASID support for vDPA device. This patch switches to use a vhost-vdpa specific IOTLB to avoid the unnecessary refactoring of the vhost core. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-5-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-31vhost-vdpa: passing iotlb to IOMMU mapping helpersGautam Dawar1-30/+37
To prepare for the ASID support for vhost-vdpa, try to pass IOTLB object to dma helpers. No functional changes, it's just a preparation for support multiple IOTLBs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Message-Id: <20220330180436.24644-4-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-18Fix double fget() in vhost_net_set_backend()Al Viro1-8/+7
Descriptor table is a shared resource; two fget() on the same descriptor may return different struct file references. get_tap_ptr_ring() is called after we'd found (and pinned) the socket we'll be using and it tries to find the private tun/tap data structures associated with it. Redoing the lookup by the same file descriptor we'd used to get the socket is racy - we need to same struct file. Thanks to Jason for spotting a braino in the original variant of patch - I'd missed the use of fd == -1 for disabling backend, and in that case we can end up with sock == NULL and sock != oldsock. Cc: stable@kernel.org Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-03-31Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-7/+47
Pull virtio updates from Michael Tsirkin: - vdpa generic device type support - more virtio hardening for broken devices (but on the same theme, revert some virtio hotplug hardening patches - they were misusing some interrupt flags and had to be reverted) - RSS support in virtio-net - max device MTU support in mlx5 vdpa - akcipher support in virtio-crypto - shared IRQ support in ifcvf vdpa - a minor performance improvement in vhost - enable virtio mem for ARM64 - beginnings of advance dma support - cleanups, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits) vdpa/mlx5: Avoid processing works if workqueue was destroyed vhost: handle error while adding split ranges to iotlb vdpa: support exposing the count of vqs to userspace vdpa: change the type of nvqs to u32 vdpa: support exposing the config size to userspace vdpa/mlx5: re-create forwarding rules after mac modified virtio: pci: check bar values read from virtio config space Revert "virtio_pci: harden MSI-X interrupts" Revert "virtio-pci: harden INTX interrupts" drivers/net/virtio_net: Added RSS hash report control. drivers/net/virtio_net: Added RSS hash report. drivers/net/virtio_net: Added basic RSS support. drivers/net/virtio_net: Fixed padded vheader to use v1 with hash. virtio: use virtio_device_ready() in virtio_device_restore() tools/virtio: compile with -pthread tools/virtio: fix after premapped buf support virtio_ring: remove flags check for unmap packed indirect desc virtio_ring: remove flags check for unmap split indirect desc virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed() net/mlx5: Add support for configuring max device MTU ...
2022-03-28vhost: handle error while adding split ranges to iotlbAnirudh Rayabharam1-1/+5
vhost_iotlb_add_range_ctx() handles the range [0, ULONG_MAX] by splitting it into two ranges and adding them separately. The return value of adding the first range to the iotlb is currently ignored. Check the return value and bail out in case of an error. Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20220312141121.4981-1-mail@anirudhrb.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: support exposing the count of vqs to userspaceLongpeng1-0/+13
- GET_VQS_COUNT: the count of virtqueues that exposed Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-4-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng &lt;<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>&gt;<br> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: change the type of nvqs to u32Longpeng1-4/+6
Change vdpa_device.nvqs and vhost_vdpa.nvqs to use u32 Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-3-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng &lt;<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>&gt;<br></blockquote><div><br></div><div>Acked-by: Jason Wang &lt;<a href="mailto:jasowang@redhat.com">jasowang@redhat.com</a>&gt;</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: support exposing the config size to userspaceLongpeng1-0/+17
- GET_CONFIG_SIZE: return the size of the virtio config space. The size contains the fields which are conditional on feature bits. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-2-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vhost_vdpa: don't setup irq offloading when irq_num < 0Zhu Lingshan1-1/+4
When irq number is negative(e.g., -EINVAL), the virtqueue may be disabled or the virtqueues are sharing a device irq. In such case, we should not setup irq offloading for a virtqueue. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Link: https://lore.kernel.org/r/20220222115428.998334-3-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28vhost: cache avail index in vhost_enable_notify()Stefano Garzarella1-1/+2
In vhost_enable_notify() we enable the notifications and we read the avail index to check if new buffers have become available in the meantime. We are not caching the avail index, so when the device will call vhost_get_vq_desc(), it will find the old value in the cache and it will read the avail index again. It would be better to refresh the cache every time we read avail index, so let's change vhost_enable_notify() caching the value in `avail_idx` and compare it with `last_avail_idx` to check if there are new buffers available. We don't expect a significant performance boost because the above path is not very common, indeed vhost_enable_notify() is often called with unlikely(), expecting that avail index has not been updated. We ran virtio-test/vhost-test and noticed minimal improvement as expected. To stress the patch more, we modified vhost_test.ko to call vhost_enable_notify()/vhost_disable_notify() on every cycle when calling vhost_get_vq_desc(); in this case we observed a more evident improvement, with a reduction of the test execution time of about 3.7%. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220121153108.187291-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+5
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17Merge tag 'net-5.17-final' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, ipsec, and wireless. A few last minute revert / disable and fix patches came down from our sub-trees. We're not waiting for any fixes at this point. Current release - regressions: - Revert "netfilter: nat: force port remap to prevent shadowing well-known ports", restore working conntrack on asymmetric paths - Revert "ath10k: drop beacon and probe response which leak from other channel", restore working AP and mesh mode on QCA9984 - eth: intel: fix hang during reboot/shutdown Current release - new code bugs: - netfilter: nf_tables: disable register tracking, it needs more work to cover all corner cases Previous releases - regressions: - ipv6: fix skb_over_panic in __ip6_append_data when (admin-only) extension headers get specified - esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return value more selectively - bnx2x: fix driver load failure when FW not present in initrd Previous releases - always broken: - vsock: stop destroying unrelated sockets in nested virtualization - packet: fix slab-out-of-bounds access in packet_recvmsg() Misc: - add Paolo Abeni to networking maintainers!" * tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (26 commits) iavf: Fix hang during reboot/shutdown net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload net: bcmgenet: skip invalid partial checksums bnx2x: fix built-in kernel driver load failure net: phy: mscc: Add MODULE_FIRMWARE macros net: dsa: Add missing of_node_put() in dsa_port_parse_of net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit() Revert "ath10k: drop beacon and probe response which leak from other channel" hv_netvsc: Add check for kvmalloc_array iavf: Fix double free in iavf_reset_task ice: destroy flow director filter mutex after releasing VSIs ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats() Add Paolo Abeni to networking maintainers atm: eni: Add check for dma_map_single net/packet: fix slab-out-of-bounds access in packet_recvmsg() net: mdio: mscc-miim: fix duplicate debugfs entry net: phy: marvell: Fix invalid comparison in the resume and suspend functions esp6: fix check on ipv6_skip_exthdr's return value net: dsa: microchip: add spi_device_id tables netfilter: nf_tables: disable register tracking ...
2022-03-11vsock: each transport cycles only on its own socketsJiyong Park1-1/+2
When iterating over sockets using vsock_for_each_connected_socket, make sure that a transport filters out sockets that don't belong to the transport. There actually was an issue caused by this; in a nested VM configuration, destroying the nested VM (which often involves the closing of /dev/vhost-vsock if there was h2g connections to the nested VM) kills not only the h2g connections, but also all existing g2h connections to the (outmost) host which are totally unrelated. Tested: Executed the following steps on Cuttlefish (Android running on a VM) [1]: (1) Enter into an `adb shell` session - to have a g2h connection inside the VM, (2) open and then close /dev/vhost-vsock by `exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb session is not reset. [1] https://android.googlesource.com/device/google/cuttlefish/ Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jiyong Park <jiyong@google.com> Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-3/+19
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10vhost: allow batching hint without sizeJason Wang1-1/+3
Commit e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") tries to reject the IOTLB message whose size is zero. But the size is not necessarily meaningful, one example is the batching hint, so the commit breaks that. Fixing this be reject zero size message only if the message is used to update/invalidate the IOTLB. Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") Reported-by: Eli Cohen <elic@nvidia.com> Cc: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220310075211.4801-1-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eli Cohen <elic@nvidia.com>
2022-03-06vhost: remove avail_event arg from vhost_update_avail_event()Stefano Garzarella1-2/+2
In vhost_update_avail_event() we never used the `avail_event` argument, since its introduction in commit 2723feaa8ec6 ("vhost: set log when updating used flags or avail event"). Let's remove it to clean up the code. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220113141134.186773-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06vhost: fix hung thread due to erroneous iotlb entriesAnirudh Rayabharam2-0/+16
In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at: https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries. Fixes: 0bbe30668d89e ("vhost: factor out IOTLB") Reported-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com Tested-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20220305095525.5145-1-mail@anirudhrb.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-04vdpa: factor out vdpa_set_features_unlocked for vdpa internal useSi-Wei Liu1-1/+1
No functional change introduced. vdpa bus driver such as virtio_vdpa or vhost_vdpa is not supposed to take care of the locking for core by its own. The locked API vdpa_set_features should suffice the bus driver's need. Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/1642206481-30721-2-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-03-02tuntap: add sanity checks about msg_controllen in sendmsgHarold Huang1-0/+1
In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to tun_sendmsg. Although we donot use msg_controllen in this path, we should check msg_controllen to make sure the caller pass a valid msg_ctl. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fe8dd45bb7556246c6b76277b1ba4296c91c2505 Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Harold Huang <baymaxhuang@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220303022441.383865-1-baymaxhuang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23vhost/vsock: don't check owner in vhost_vsock_stop() while releasingStefano Garzarella1-7/+14
vhost_vsock_stop() calls vhost_dev_check_owner() to check the device ownership. It expects current->mm to be valid. vhost_vsock_stop() is also called by vhost_vsock_dev_release() when the user has not done close(), so when we are in do_exit(). In this case current->mm is invalid and we're releasing the device, so we should clean it anyway. Let's check the owner only when vhost_vsock_stop() is called by an ioctl. When invoked from release we can not fail so we don't check return code of vhost_vsock_stop(). We need to stop vsock even if it's not the owner. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>