summaryrefslogtreecommitdiffstats
path: root/drivers/vfio
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner7-0/+7
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14mm/gup: change GUP fast to use flags rather than a write 'bool'Ira Weiny1-1/+2
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERMIra Weiny1-1/+2
Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-13Merge tag 'iommu-updates-v5.2' of ↵Linus Torvalds3-20/+138
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - ATS support for ARM-SMMU-v3. - AUX domain support in the IOMMU-API and the Intel VT-d driver. This adds support for multiple DMA address spaces per (PCI-)device. The use-case is to multiplex devices between host and KVM guests in a more flexible way than supported by SR-IOV. - the rest are smaller cleanups and fixes, two of which needed to be reverted after testing in linux-next. * tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (45 commits) Revert "iommu/amd: Flush not present cache in iommu_map_page" Revert "iommu/amd: Remove the leftover of bypass support" iommu/vt-d: Fix leak in intel_pasid_alloc_table on error path iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU iommu/vt-d: Set intel_iommu_gfx_mapped correctly iommu/amd: Flush not present cache in iommu_map_page iommu/vt-d: Cleanup: no spaces at the start of a line iommu/vt-d: Don't request page request irq under dmar_global_lock iommu/vt-d: Use struct_size() helper iommu/mediatek: Fix leaked of_node references iommu/amd: Remove amd_iommu_pd_list iommu/arm-smmu: Log CBFRSYNRA register on context fault iommu/arm-smmu-v3: Don't disable SMMU in kdump kernel iommu/arm-smmu-v3: Disable tagged pointers iommu/arm-smmu-v3: Add support for PCI ATS iommu/arm-smmu-v3: Link domains and devices iommu/arm-smmu-v3: Add a master->domain pointer iommu/arm-smmu-v3: Store SteamIDs in master iommu/arm-smmu-v3: Rename arm_smmu_master_data to arm_smmu_master ACPI/IORT: Check ATS capability in root complex nodes ...
2019-05-11Merge tag 'vfio-v5.2-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds9-84/+67
Pull VFIO updates from Alex Williamson: - Improve dev_printk() usage (Bjorn Helgaas) - Fix issue with blocking in !TASK_RUNNING state while waiting for userspace to release devices (Farhan Ali) - Fix error path cleanup in nvlink setup (Greg Kurz) - mdev-core cleanups and fixes in preparation for more use cases (Parav Pandit) - Cornelia has volunteered as an official vfio reviewer (Cornelia Huck) * tag 'vfio-v5.2-rc1' of git://github.com/awilliam/linux-vfio: vfio: Add Cornelia Huck as reviewer vfio/mdev: Avoid inline get and put parent helpers vfio/mdev: Fix aborting mdev child device removal if one fails vfio/mdev: Follow correct remove sequence vfio/mdev: Avoid masking error code to EBUSY vfio/mdev: Drop redundant extern for exported symbols vfio/mdev: Removed unused kref vfio/mdev: Avoid release parent reference during error path vfio-pci/nvlink2: Fix potential VMA leak vfio: Fix WARNING "do not call blocking ops when !TASK_RUNNING" vfio: Use dev_printk() when possible
2019-05-07vfio/mdev: Avoid inline get and put parent helpersParav Pandit1-2/+2
As section 15 of Documentation/process/coding-style.rst clearly describes that compiler will be able to optimize code. Hence drop inline for get and put helpers for parent. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Fix aborting mdev child device removal if one failsParav Pandit1-6/+4
device_for_each_child() stops executing callback function for remaining child devices, if callback hits an error. Each child mdev device is independent of each other. While unregistering parent device, mdev core must remove all child mdev devices. Therefore, mdev_device_remove_cb() always returns success so that device_for_each_child doesn't abort if one child removal hits error. While at it, improve remove and unregister functions for below simplicity. There isn't need to pass forced flag pointer during mdev parent removal which invokes mdev_device_remove(). So simplify the flow. mdev_device_remove() is called from two paths. 1. mdev_unregister_driver() mdev_device_remove_cb() mdev_device_remove() 2. remove_store() mdev_device_remove() Fixes: 7b96953bc640 ("vfio: Mediated device Core driver") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Follow correct remove sequenceParav Pandit1-1/+1
mdev_remove_sysfs_files() should follow exact mirror sequence of a create, similar to what is followed in error unwinding path of mdev_create_sysfs_files(). Fixes: 6a62c1dfb5c7 ("vfio/mdev: Re-order sysfs attribute creation") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Avoid masking error code to EBUSYParav Pandit1-1/+1
Instead of masking return error to -EBUSY, return actual error returned by the driver. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Removed unused krefParav Pandit2-2/+0
Remove unused kref from the mdev_device structure. Fixes: 7b96953bc640 ("vfio: Mediated device Core driver") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Avoid release parent reference during error pathParav Pandit1-0/+1
During mdev parent registration in mdev_register_device(), if parent device is duplicate, it releases the reference of existing parent device. This is incorrect. Existing parent device should not be touched. Fixes: 7b96953bc640 ("vfio: Mediated device Core driver") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-01vfio-pci/nvlink2: Fix potential VMA leakGreg Kurz1-0/+2
If vfio_pci_register_dev_region() fails then we should rollback previous changes, ie. unmap the ATSD registers. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-04-23vfio: Fix WARNING "do not call blocking ops when !TASK_RUNNING"Farhan Ali1-20/+10
vfio_dev_present() which is the condition to wait_event_interruptible_timeout(), will call vfio_group_get_device and try to acquire the mutex group->device_lock. wait_event_interruptible_timeout() will set the state of the current task to TASK_INTERRUPTIBLE, before doing the condition check. This means that we will try to acquire the mutex while already in a sleeping state. The scheduler warns us by giving the following warning: [ 4050.264464] ------------[ cut here ]------------ [ 4050.264508] do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000b33c00e2>] prepare_to_wait_event+0x14a/0x188 [ 4050.264529] WARNING: CPU: 12 PID: 35924 at kernel/sched/core.c:6112 __might_sleep+0x76/0x90 .... 4050.264756] Call Trace: [ 4050.264765] ([<000000000017bbaa>] __might_sleep+0x72/0x90) [ 4050.264774] [<0000000000b97edc>] __mutex_lock+0x44/0x8c0 [ 4050.264782] [<0000000000b9878a>] mutex_lock_nested+0x32/0x40 [ 4050.264793] [<000003ff800d7abe>] vfio_group_get_device+0x36/0xa8 [vfio] [ 4050.264803] [<000003ff800d87c0>] vfio_del_group_dev+0x238/0x378 [vfio] [ 4050.264813] [<000003ff8015f67c>] mdev_remove+0x3c/0x68 [mdev] [ 4050.264825] [<00000000008e01b0>] device_release_driver_internal+0x168/0x268 [ 4050.264834] [<00000000008de692>] bus_remove_device+0x162/0x190 [ 4050.264843] [<00000000008daf42>] device_del+0x1e2/0x368 [ 4050.264851] [<00000000008db12c>] device_unregister+0x64/0x88 [ 4050.264862] [<000003ff8015ed84>] mdev_device_remove+0xec/0x130 [mdev] [ 4050.264872] [<000003ff8015f074>] remove_store+0x6c/0xa8 [mdev] [ 4050.264881] [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8 [ 4050.264890] [<00000000003c1530>] __vfs_write+0x38/0x1a8 [ 4050.264899] [<00000000003c187c>] vfs_write+0xb4/0x198 [ 4050.264908] [<00000000003c1af2>] ksys_write+0x5a/0xb0 [ 4050.264916] [<0000000000b9e270>] system_call+0xdc/0x2d8 [ 4050.264925] 4 locks held by sh/35924: [ 4050.264933] #0: 000000001ef90325 (sb_writers#4){.+.+}, at: vfs_write+0x9e/0x198 [ 4050.264948] #1: 000000005c1ab0b3 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cc/0x1f8 [ 4050.264963] #2: 0000000034831ab8 (kn->count#297){++++}, at: kernfs_remove_self+0x12e/0x150 [ 4050.264979] #3: 00000000e152484f (&dev->mutex){....}, at: device_release_driver_internal+0x5c/0x268 [ 4050.264993] Last Breaking-Event-Address: [ 4050.265002] [<000000000017bbaa>] __might_sleep+0x72/0x90 [ 4050.265010] irq event stamp: 7039 [ 4050.265020] hardirqs last enabled at (7047): [<00000000001cee7a>] console_unlock+0x6d2/0x740 [ 4050.265029] hardirqs last disabled at (7054): [<00000000001ce87e>] console_unlock+0xd6/0x740 [ 4050.265040] softirqs last enabled at (6416): [<0000000000b8fe26>] __udelay+0xb6/0x100 [ 4050.265049] softirqs last disabled at (6415): [<0000000000b8fe06>] __udelay+0x96/0x100 [ 4050.265057] ---[ end trace d04a07d39d99a9f9 ]--- Let's fix this as described in the article https://lwn.net/Articles/628628/. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> [remove now redundant vfio_dev_present()] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-04-22vfio: Use dev_printk() when possibleBjorn Helgaas5-52/+46
Use dev_printk() when possible to make messages consistent with other device-related messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-04-19Make anon_inodes unconditionalDavid Howells1-1/+0
Make the anon_inodes facility unconditional so that it can be used by core VFS code and pidfd code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [christian@brauner.io: adapt commit message to mention pidfds] Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-12vfio/type1: Handle different mdev isolation typeLu Baolu1-13/+42
This adds the support to determine the isolation type of a mediated device group by checking whether it has an iommu device. If an iommu device exists, an iommu domain will be allocated and then attached to the iommu device. Otherwise, keep the same behavior as it is. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-04-12vfio/type1: Add domain at(de)taching group helpersLu Baolu1-7/+77
This adds helpers to attach or detach a domain to a group. This will replace iommu_attach_group() which only works for non-mdev devices. If a domain is attaching to a group which includes the mediated devices, it should attach to the iommu device (a pci device which represents the mdev in iommu scope) instead. The added helper supports attaching domain to groups for both pci and mdev devices. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-04-12vfio/mdev: Add iommu related member in mdev_deviceLu Baolu2-0/+19
A parent device might create different types of mediated devices. For example, a mediated device could be created by the parent device with full isolation and protection provided by the IOMMU. One usage case could be found on Intel platforms where a mediated device is an assignable subset of a PCI, the DMA requests on behalf of it are all tagged with a PASID. Since IOMMU supports PASID-granular translations (scalable mode in VT-d 3.0), this mediated device could be individually protected and isolated by an IOMMU. This patch adds a new member in the struct mdev_device to indicate that the mediated device represented by mdev could be isolated and protected by attaching a domain to a device represented by mdev->iommu_device. It also adds a helper to add or set the iommu device. * mdev_device->iommu_device - This, if set, indicates that the mediated device could be fully isolated and protected by IOMMU via attaching an iommu domain to this device. If empty, it indicates using vendor defined isolation, hence bypass IOMMU. * mdev_set/get_iommu_device(dev, iommu_device) - Set or get the iommu device which represents this mdev in IOMMU's device scope. Drivers don't need to set the iommu device if it uses vendor defined isolation. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Liu Yi L <yi.l.liu@intel.com> Suggested-by: Kevin Tian <kevin.tian@intel.com> Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-04-03vfio/type1: Limit DMA mappings per containerAlex Williamson1-0/+14
Memory backed DMA mappings are accounted against a user's locked memory limit, including multiple mappings of the same memory. This accounting bounds the number of such mappings that a user can create. However, DMA mappings that are not backed by memory, such as DMA mappings of device MMIO via mmaps, do not make use of page pinning and therefore do not count against the user's locked memory limit. These mappings still consume memory, but the memory is not well associated to the process for the purpose of oom killing a task. To add bounding on this use case, we introduce a limit to the total number of concurrent DMA mappings that a user is allowed to create. This limit is exposed as a tunable module option where the default value of 64K is expected to be well in excess of any reasonable use case (a large virtual machine configuration would typically only make use of tens of concurrent mappings). This fixes CVE-2019-3882. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-04-03vfio/spapr_tce: Make symbol 'tce_iommu_driver_ops' staticWang Hai1-1/+1
Fixes the following sparse warning: drivers/vfio/vfio_iommu_spapr_tce.c:1401:36: warning: symbol 'tce_iommu_driver_ops' was not declared. Should it be static? Fixes: 5ffd229c0273 ("powerpc/vfio: Implement IOMMU driver for VFIO") Signed-off-by: Wang Hai <wanghai26@huawei.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-04-03vfio/pci: use correct format charactersLouis Taylor1-2/+2
When compiling with -Wformat, clang emits the following warnings: drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Louis Taylor <louis@kragniz.eu> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-03-07Merge tag 'powerpc-5.1-1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Enable THREAD_INFO_IN_TASK to move thread_info off the stack. - A big series from Christoph reworking our DMA code to use more of the generic infrastructure, as he said: "This series switches the powerpc port to use the generic swiotlb and noncoherent dma ops, and to use more generic code for the coherent direct mapping, as well as removing a lot of dead code." - Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing us to support machines with larger amounts of total RAM or distance between nodes. - Two series from Christophe, one to optimise TLB miss handlers on 6xx, and another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit CPUs. - Support for KCOV coverage instrumentation which means we can run syzkaller and discover even more bugs in our code. And as always many clean-ups, reworks and minor fixes etc. Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/32: Clear on-stack exception marker upon exception return powerpc: Remove export of save_stack_trace_tsk_reliable() powerpc/mm: fix "section_base" set but not used powerpc/mm: Fix "sz" set but not used warning powerpc/mm: Check secondary hash page table powerpc: remove nargs from __SYSCALL powerpc/64s: Fix unrelocated interrupt trampoline address test powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables powerpc/fsl: Fix the flush of branch predictor. powerpc/powernv: Make opal log only readable by root powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C powerpc/64s: Fix data interrupts vs d-side MCE reentrancy powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy powerpc/64s: system reset interrupt preserve HSRRs powerpc/64s: Fix HV NMI vs HV interrupt recoverability test powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback selftests/powerpc: Remove duplicate header powerpc sstep: Add support for modsd, modud instructions ...
2019-02-18vfio_pci: Enable memory accesses before calling pci_map_romEric Auger1-5/+14
pci_map_rom/pci_get_rom_size() performs memory access in the ROM. In case the Memory Space accesses were disabled, readw() is likely to trigger a synchronous external abort on some platforms. In case memory accesses were disabled, re-enable them before the call and disable them back again just after. Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver") Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-18vfio/pci: Restore device state on PM transitionAlex Williamson3-9/+70
PCI core handles save and restore of device state around reset, but when using pci_set_power_state() we can unintentionally trigger a soft reset of the device, where PCI core only restores the BAR state. If we're using vfio-pci's idle D3 support to try to put devices into low power when unused, this might trigger a reset when the device is woken for use. Also power state management by the user, or within a guest, can put the device into D3 power state with potentially limited ability to restore the device if it should undergo a reset. The PCI spec does not define the extent of a soft reset and many devices reporting soft reset on D3->D0 transition do not undergo a PCI config space reset. It's therefore assumed safe to unconditionally restore the remainder of the state if the device indicates soft reset support, even on a user initiated wakeup. Implement a wrapper in vfio-pci to tag devices reporting PM reset support, save their state on transitions into D3 and restore on transitions back to D0. Reported-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-13vfio/spapr_tce: Skip unsetting already unset tableAlexey Kardashevskiy1-1/+2
VFIO TCE IOMMU v2 owns IOMMU tables. When we detach an IOMMU group from a container, we need to unset these tables from the group which we do by calling unset_window(). We also unset tables when removing a DMA window via the VFIO_IOMMU_SPAPR_TCE_REMOVE ioctl. The window removal checks if the table actually exists (hidden inside tce_iommu_find_table()) but the group detaching does not so the user may see duplicating messages: pci 0009:03 : [PE# fd] Removing DMA window #0 pci 0009:03 : [PE# fd] Removing DMA window #1 pci 0009:03 : [PE# fd] Removing DMA window #0 pci 0009:03 : [PE# fd] Removing DMA window #1 At the moment this is not a problem as the second invocation of unset_window() writes zeroes to the HW registers again and exits early as there is no table. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-12vfio: expand minor range when registering chrdev regionChengguang Xu1-4/+4
Actually, total amount of available minor number for a single major is MINORMARK + 1. So expand minor range when registering chrdev region. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-05vfio: platform: reset: fix up include directives to remove ccflags-yMasahiro Yamada4-5/+3
For the include directive with double-quotes "", the preprocessor searches the header in the relative path to the current file. Fix them up, and remove the header search path option. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-05vfio-mdev: Switch to use new generic UUID APIAndy Shevchenko3-13/+14
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Cc: Kirti Wankhede <kwankhede@nvidia.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-05powerpc/eeh: Improve recovery of passed-through devicesSam Bobroff1-3/+3
Currently, the EEH recovery process considers passed-through devices as if they were not EEH-aware, which can cause them to be removed as part of recovery. Because device removal requires cooperation from the guest, this may lead to the process stalling or deadlocking. Also, if devices are removed on the host side, they will be removed from their IOMMU group, making recovery in the guest impossible. Therefore, alter the recovery process so that passed-through devices are not removed but are instead left frozen (and marked isolated) until the guest performs it's own recovery. If firmware thaws a passed-through PE because it's parent PE has been thawed (because it was not passed through), re-freeze it. Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-23vfio-pci/nvlink2: Fix ancient gcc warningsAlexey Kardashevskiy1-15/+15
Using the {0} construct as a generic initializer is perfectly fine in C, however due to a bug in old gcc there is a warning: + /kisskb/src/drivers/vfio/pci/vfio_pci_nvlink2.c: warning: (near initialization for 'cap.header') [-Wmissing-braces]: => 181:9 Since for whatever reason we still want to compile the modern kernel with such an old gcc without warnings, this changes the capabilities initialization. The gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119 Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-01-22vfio/pci: Cleanup license messThomas Gleixner2-10/+2
The recently added nvlink2 VFIO driver introduced a license conflict in two files. In both cases the SPDX license identifier is: SPDX-License-Identifier: GPL-2.0+ but the files contain also the following license boiler plate text: * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation The latter is GPL-2.9-only and not GPL-2.0=. Looking deeper. The nvlink source file is derived from vfio_pci_igd.c which is also licensed under GPL-2.0-only and it can be assumed that the file was copied and modified. As the original file is licensed GPL-2.0-only it's not possible to relicense derivative work to GPL-2.0-or-later. Fix the SPDX identifier and remove the boiler plate as it is redundant. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: kvm@vger.kernel.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-01-08vfio/type1: Fix unmap overflow off-by-oneAlex Williamson1-1/+1
The below referenced commit adds a test for integer overflow, but in doing so prevents the unmap ioctl from ever including the last page of the address space. Subtract one to compare to the last address of the unmap to avoid the overflow and wrap-around. Fixes: 71a7d3d78e3c ("vfio/type1: silence integer overflow warning") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1662291 Cc: stable@vger.kernel.org # v4.15+ Reported-by: Pei Zhang <pezhang@redhat.com> Debugged-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-01-08vfio/pci: set TRACE_INCLUDE_PATH to fix the build errorMasahiro Yamada1-1/+1
drivers/vfio/pci/vfio_pci_nvlink2.c cannot be compiled for in-tree building. CC drivers/vfio/pci/vfio_pci_nvlink2.o In file included from drivers/vfio/pci/trace.h:102, from drivers/vfio/pci/vfio_pci_nvlink2.c:29: ./include/trace/define_trace.h:89:42: fatal error: ./trace.h: No such file or directory #include TRACE_INCLUDE(TRACE_INCLUDE_FILE) ^ compilation terminated. make[1]: *** [scripts/Makefile.build;277: drivers/vfio/pci/vfio_pci_nvlink2.o] Error 1 To fix the build error, let's tell include/trace/define_trace.h the location of drivers/vfio/pci/trace.h Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-01-01Merge tag 'iommu-updates-v4.21' of ↵Linus Torvalds1-31/+2
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - Page table code for AMD IOMMU now supports large pages where smaller page-sizes were mapped before. VFIO had to work around that in the past and I included a patch to remove it (acked by Alex Williamson) - Patches to unmodularize a couple of IOMMU drivers that would never work as modules anyway. - Work to unify the the iommu-related pointers in 'struct device' into one pointer. This work is not finished yet, but will probably be in the next cycle. - NUMA aware allocation in iommu-dma code - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver - Scalable mode support for the Intel VT-d driver - PM runtime improvements for the ARM-SMMU driver - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom - Various smaller fixes and improvements * tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits) iommu: Check for iommu_ops == NULL in iommu_probe_device() ACPI/IORT: Don't call iommu_ops->add_device directly iommu/of: Don't call iommu_ops->add_device directly iommu: Consolitate ->add/remove_device() calls iommu/sysfs: Rename iommu_release_device() dmaengine: sh: rcar-dmac: Use device_iommu_mapped() xhci: Use device_iommu_mapped() powerpc/iommu: Use device_iommu_mapped() ACPI/IORT: Use device_iommu_mapped() iommu/of: Use device_iommu_mapped() driver core: Introduce device_iommu_mapped() function iommu/tegra: Use helper functions to access dev->iommu_fwspec iommu/qcom: Use helper functions to access dev->iommu_fwspec iommu/of: Use helper functions to access dev->iommu_fwspec iommu/mediatek: Use helper functions to access dev->iommu_fwspec iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec iommu/dma: Use helper functions to access dev->iommu_fwspec iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec ACPI/IORT: Use helper functions to access dev->iommu_fwspec iommu: Introduce wrappers around dev->iommu_fwspec ...
2018-12-28Merge tag 'vfio-v4.21-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds3-26/+144
Pull VFIO updates from Alex Williamson: - Replace global vfio-pci lock with per bus lock to allow concurrent open and release (Alex Williamson) - Declare mdev function as static (Paolo Cretaro) - Convert char to u8 in mdev/mtty sample driver (Nathan Chancellor) * tag 'vfio-v4.21-rc1' of git://github.com/awilliam/linux-vfio: vfio-mdev/samples: Use u8 instead of char for handle functions vfio/mdev: add static modifier to add_mdev_supported_type vfio/pci: Parallelize device open and release
2018-12-21vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriverAlexey Kardashevskiy6-2/+630
POWER9 Witherspoon machines come with 4 or 6 V100 GPUs which are not pluggable PCIe devices but still have PCIe links which are used for config space and MMIO. In addition to that the GPUs have 6 NVLinks which are connected to other GPUs and the POWER9 CPU. POWER9 chips have a special unit on a die called an NPU which is an NVLink2 host bus adapter with p2p connections to 2 to 3 GPUs, 3 or 2 NVLinks to each. These systems also support ATS (address translation services) which is a part of the NVLink2 protocol. Such GPUs also share on-board RAM (16GB or 32GB) to the system via the same NVLink2 so a CPU has cache-coherent access to a GPU RAM. This exports GPU RAM to the userspace as a new VFIO device region. This preregisters the new memory as device memory as it might be used for DMA. This inserts pfns from the fault handler as the GPU memory is not onlined until the vendor driver is loaded and trained the NVLinks so doing this earlier causes low level errors which we fence in the firmware so it does not hurt the host system but still better be avoided; for the same reason this does not map GPU RAM into the host kernel (usual thing for emulated access otherwise). This exports an ATSD (Address Translation Shootdown) register of NPU which allows TLB invalidations inside GPU for an operating system. The register conveniently occupies a single 64k page. It is also presented to the userspace as a new VFIO device region. One NPU has 8 ATSD registers, each of them can be used for TLB invalidation in a GPU linked to this NPU. This allocates one ATSD register per an NVLink bridge allowing passing up to 6 registers. Due to the host firmware bug (just recently fixed), only 1 ATSD register per NPU was actually advertised to the host system so this passes that alone register via the first NVLink bridge device in the group which is still enough as QEMU collects them all back and presents to the guest via vPHB to mimic the emulated NPU PHB on the host. In order to provide the userspace with the information about GPU-to-NVLink connections, this exports an additional capability called "tgt" (which is an abbreviated host system bus address). The "tgt" property tells the GPU its own system address and allows the guest driver to conglomerate the routing information so each GPU knows how to get directly to the other GPUs. For ATS to work, the nest MMU (an NVIDIA block in a P9 CPU) needs to know LPID (a logical partition ID or a KVM guest hardware ID in other words) and PID (a memory context ID of a userspace process, not to be confused with a linux pid). This assigns a GPU to LPID in the NPU and this is why this adds a listener for KVM on an IOMMU group. A PID comes via NVLink from a GPU and NPU uses a PID wildcard to pass it through. This requires coherent memory and ATSD to be available on the host as the GPU vendor only supports configurations with both features enabled and other configurations are known not to work. Because of this and because of the ways the features are advertised to the host system (which is a device tree with very platform specific properties), this requires enabled POWERNV platform. The V100 GPUs do not advertise any of these capabilities via the config space and there are more than just one device ID so this relies on the platform to tell whether these GPUs have special abilities such as NVLinks. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-21vfio_pci: Allow regions to add own capabilitiesAlexey Kardashevskiy2-0/+9
VFIO regions already support region capabilities with a limited set of fields. However the subdriver might have to report to the userspace additional bits. This adds an add_capability() hook to vfio_pci_regops. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-21vfio_pci: Allow mapping extra regionsAlexey Kardashevskiy2-0/+12
So far we only allowed mapping of MMIO BARs to the userspace. However there are GPUs with on-board coherent RAM accessible via side channels which we also want to map to the userspace. The first client for this is NVIDIA V100 GPU with NVLink2 direct links to a POWER9 NPU-enabled CPU; such GPUs have 16GB RAM which is coherently mapped to the system address space, we are going to export these as an extra PCI region. We already support extra PCI regions and this adds support for mapping them to the userspace. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-21powerpc/vfio/iommu/kvm: Do not pin device memoryAlexey Kardashevskiy1-10/+19
This new memory does not have page structs as it is not plugged to the host so gup() will fail anyway. This adds 2 helpers: - mm_iommu_newdev() to preregister the "memory device" memory so the rest of API can still be used; - mm_iommu_is_devmem() to know if the physical address is one of thise new regions which we must avoid unpinning of. This adds @mm to tce_page_is_contained() and iommu_tce_xchg() to test if the memory is device memory to avoid pfn_to_page(). This adds a check for device memory in mm_iommu_ua_mark_dirty_rm() which does delayed pages dirtying. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-21powerpc/mm/iommu/vfio_spapr_tce: Change mm_iommu_get to reference a regionAlexey Kardashevskiy1-12/+23
Normally mm_iommu_get() should add a reference and mm_iommu_put() should remove it. However historically mm_iommu_find() does the referencing and mm_iommu_get() is doing allocation and referencing. We are going to add another helper to preregister device memory so instead of having mm_iommu_new() (which pre-registers the normal memory and references the region), we need separate helpers for pre-registering and referencing. This renames: - mm_iommu_get to mm_iommu_new; - mm_iommu_find to mm_iommu_get. This changes mm_iommu_get() to reference the region so the name now reflects what it does. This removes the check for exact match from mm_iommu_new() as we want it to fail on existing regions; mm_iommu_get() should be used instead. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20vfio/spapr_tce: Get rid of possible infinite loopAlexey Kardashevskiy1-7/+3
As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered memory. If there is a bug in memory release, the loop in tce_iommu_release() becomes infinite; this actually happened to me. This makes the loop finite and prints a warning on every failure to make the code more bug prone. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-12vfio/mdev: add static modifier to add_mdev_supported_typePaolo Cretaro1-2/+2
Set add_mdev_supported_type as static since it is only used within mdev_sysfs.c. This fixes -Wmissing-prototypes gcc warning. Signed-off-by: Paolo Cretaro <paolocretaro@gmail.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-12-12vfio/pci: Parallelize device open and releaseAlex Williamson2-24/+142
In commit 61d792562b53 ("vfio-pci: Use mutex around open, release, and remove") a mutex was added to freeze the refcnt for a device so that we can handle errors and perform bus resets on final close. However, bus resets can be rather slow and a global mutex here is undesirable. Evaluating the potential locking granularity, a per-device mutex provides the best resolution but with multiple devices on a bus all released concurrently, they'll race to acquire each other's mutex, likely resulting in no reset at all if we use trylock. We therefore lock at the granularity of the bus/slot reset as we're only attempting a single reset for this group of devices anyway. This allows much greater scaling as we're bounded in the number of devices protected by a single reflck object. Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-11-15vfio/type1: Remove map_try_harder() code pathJoerg Roedel1-31/+2
The AMD IOMMU driver can now map a huge-page where smaller mappings existed before, so this code-path is no longer triggered. Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-10-31Merge tag 'vfio-v4.20-rc1.v2' of git://github.com/awilliam/linux-vfioLinus Torvalds3-4/+37
Pull VFIO updates from Alex Williamson: - EDID interfaces for vfio devices supporting display extensions (Gerd Hoffmann) - Generically select Type-1 IOMMU model support on ARM/ARM64 (Geert Uytterhoeven) - Quirk for VFs reporting INTx pin (Alex Williamson) - Fix error path memory leak in MSI support (Li Qiang) * tag 'vfio-v4.20-rc1.v2' of git://github.com/awilliam/linux-vfio: vfio: add edid support to mbochs sample driver vfio: add edid api for display (vgpu) devices. drivers/vfio: Allow type-1 IOMMU instantiation with all ARM/ARM64 IOMMUs vfio/pci: Mask buggy SR-IOV VF INTx support vfio/pci: Fix potential memory leak in vfio_msi_cap_len
2018-10-20KVM: PPC: Optimize clearing TCEs for sparse tablesAlexey Kardashevskiy1-2/+21
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE table and a table with userspace addresses. These tables are radix trees, we allocate indirect levels when they are written to. Since the memory allocation is problematic in real mode, we have 2 accessors to the entries: - for virtual mode: it allocates the memory and it is always expected to return non-NULL; - fr real mode: it does not allocate and can return NULL. Also, DMA windows can span to up to 55 bits of the address space and since we never have this much RAM, such windows are sparse. However currently the SPAPR TCE IOMMU driver walks through all TCEs to unpin DMA memory. Since we maintain a userspace addresses table for VFIO which is a mirror of the hardware table, we can use it to know which parts of the DMA window have not been mapped and skip these so does this patch. The bare metal systems do not have this problem as they use a bypass mode of a PHB which maps RAM directly. This helps a lot with sparse DMA windows, reducing the shutdown time from about 3 minutes per 1 billion TCEs to a few seconds for 32GB sparse guest. Just skipping the last level seems to be good enough. As non-allocating accessor is used now in virtual mode as well, rename it from IOMMU_TABLE_USERSPACE_ENTRY_RM (real mode) to _RO (read only). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-09-25drivers/vfio: Allow type-1 IOMMU instantiation with all ARM/ARM64 IOMMUsGeert Uytterhoeven1-1/+1
Currently the type-1 IOMMU instantiation depends on "ARM_SMMU || ARM_SMMU_V3", while it applies to other ARM/ARM64 platforms with an IOMMU (e.g. Renesas VMSA-compatible IPMMUs). Instead of extending the list of IOMMU types on ARM platforms, replace the list by "ARM || ARM64", like other architectures do. The feature is still restricted to ARM/ARM64 platforms with an IOMMU by the dependency on IOMMU_API. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-09-25vfio/pci: Mask buggy SR-IOV VF INTx supportAlex Williamson2-2/+33
The SR-IOV spec requires that VFs must report zero for the INTx pin register as VFs are precluded from INTx support. It's much easier for the host kernel to understand whether a device is a VF and therefore whether a non-zero pin register value is bogus than it is to do the same in userspace. Override the INTx count for such devices and virtualize the pin register to provide a consistent view of the device to the user. As this is clearly a spec violation, warn about it to support hardware validation, but also provide a known whitelist as it doesn't do much good to continue complaining if the hardware vendor doesn't plan to fix it. Known devices with this issue: 8086:270c Tested-by: Gage Eads <gage.eads@intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-09-25vfio/pci: Fix potential memory leak in vfio_msi_cap_lenLi Qiang1-1/+3
Free allocated vdev->msi_perm in error path. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-08-17Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds1-56/+9
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...