Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull KVM updates from Paolo Bonzini:
"Much x86 work was pushed out to 5.12, but ARM more than made up for it.
ARM:
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
s390:
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
x86:
- Tracepoints for the new pagetable code from 5.10
- Catch VFIO and KVM irqfd events before userspace
- Reporting dirty pages to userspace with a ring buffer
- SEV-ES host support
- Nested VMX support for wait-for-SIPI activity state
- New feature flag (AVX512 FP16)
- New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
- Selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: SVM: fix 32-bit compilation
KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
KVM: SVM: Provide support to launch and run an SEV-ES guest
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Do not report support for SMM for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Support string IO operations for an SEV-ES guest
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Create trace events for VMGEXIT processing
...
|
|
Pull VFIO updates from Alex Williamson:
- Fix uninitialized list walk in error path (Eric Auger)
- Use io_remap_pfn_range() (Jason Gunthorpe)
- Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy)
- Enable mdev request interrupt with CCW support (Eric Farman)
- Enable interface to iommu_domain from vfio_group (Lu Baolu)
* tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio:
vfio/type1: Add vfio_group_iommu_domain()
vfio-ccw: Wire in the request callback
vfio-mdev: Wire in a request handler for mdev parent
vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU
vfio-pci: Use io_remap_pfn_range() for PCI IO memory
vfio/pci: Move dummy_resources_list init in vfio_pci_probe()
|
|
Add the API for getting the domain from a vfio group. This could be used
by the physical device drivers which rely on the vfio/mdev framework for
mediated device user level access. The typical use case like below:
unsigned int pasid;
struct vfio_group *vfio_group;
struct iommu_domain *iommu_domain;
struct device *dev = mdev_dev(mdev);
struct device *iommu_device = mdev_get_iommu_device(dev);
if (!iommu_device ||
!iommu_dev_feature_enabled(iommu_device, IOMMU_DEV_FEAT_AUX))
return -EINVAL;
vfio_group = vfio_group_get_external_user_from_dev(dev);
if (IS_ERR_OR_NULL(vfio_group))
return -EFAULT;
iommu_domain = vfio_group_iommu_domain(vfio_group);
if (IS_ERR_OR_NULL(iommu_domain)) {
vfio_group_put_external_user(vfio_group);
return -EFAULT;
}
pasid = iommu_aux_get_pasid(iommu_domain, iommu_device);
if (pasid < 0) {
vfio_group_put_external_user(vfio_group);
return -EFAULT;
}
/* Program device context with pasid value. */
...
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Switch to use new platform_get_mem_or_io() instead of home grown analogue.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201209203642.27648-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While performing some destructive tests with vfio-ccw, where the
paths to a device are forcible removed and thus the device itself
is unreachable, it is rather easy to end up in an endless loop in
vfio_del_group_dev() due to the lack of a request callback for the
associated device.
In this example, one MDEV (77c) is used by a guest, while another
(77b) is not. The symptom is that the iommu is detached from the
mdev for 77b, but not 77c, until that guest is shutdown:
[ 238.794867] vfio_ccw 0.0.077b: MDEV: Unregistering
[ 238.794996] vfio_mdev 11f2d2bc-4083-431d-a023-eff72715c4f0: Removing from iommu group 2
[ 238.795001] vfio_mdev 11f2d2bc-4083-431d-a023-eff72715c4f0: MDEV: detaching iommu
[ 238.795036] vfio_ccw 0.0.077c: MDEV: Unregistering
...silence...
Let's wire in the request call back to the mdev device, so that a
device being physically removed from the host can be (gracefully?)
handled by the parent device at the time the device is removed.
Add a message when registering the device if a driver doesn't
provide this callback, so a clue is given that this same loop
may be encountered in a similar situation, and a message when
this occurs instead of the awkward silence noted above.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
We execute certain NPU2 setup code (such as mapping an LPID to a device
in NPU2) unconditionally if an Nvlink bridge is detected. However this
cannot succeed on POWER8NVL machines as the init helpers return an error
other than ENODEV which means the device is there is and setup failed so
vfio_pci_enable() fails and pass through is not possible.
This changes the two NPU2 related init helpers to return -ENODEV if
there is no "memory-region" device tree property as this is
the distinction between NPU and NPU2.
Tested on
- POWER9 pvr=004e1201, Ubuntu 19.04 host, Ubuntu 18.04 vm,
NVIDIA GV100 10de:1db1 driver 418.39
- POWER8 pvr=004c0100, RHEL 7.6 host, Ubuntu 16.10 vm,
NVIDIA P100 10de:15f9 driver 396.47
Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") allows drivers using mmap to put PCI memory mapped
BAR space into userspace to work correctly on AMD SME systems that default
to all memory encrypted.
Since vfio_pci_mmap_fault() is working with PCI memory mapped BAR space it
should be calling io_remap_pfn_range() otherwise it will not work on SME
systems.
Fixes: 11c4cd07ba11 ("vfio-pci: Fault mmaps to enable vma tracking")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Peter Xu <peterx@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In case an error occurs in vfio_pci_enable() before the call to
vfio_pci_probe_mmaps(), vfio_pci_disable() will try to iterate
on an uninitialized list and cause a kernel panic.
Lets move to the initialization to vfio_pci_probe() to fix the
issue.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: 05f0c03fbac1 ("vfio-pci: Allow to mmap sub-page MMIO BARs if the mmio page is exclusive")
CC: Stable <stable@vger.kernel.org> # v4.7+
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Don't allow the events to accumulate in the eventfd counter, drain them
as they are handled.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20201027135523.646811-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Bypass the IGD initialization when -ENODEV returns,
that should be the case if opregion is not available for IGD
or within discrete graphics device's option ROM,
or host/lpc bridge is not found.
Then use of -ENODEV here means no special device resources found
which needs special care for VFIO, but we still allow other normal
device resource access.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Fred Gao <fred.gao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put will result in
reference leak in vfio_platform_open, so we should fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The ioeventfd is called under spinlock with interrupts disabled,
therefore if the memory lock is contended defer code that might
sleep to a thread context.
Fixes: bc93b9ae0151 ("vfio-pci: Avoid recursive read-lock usage")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209253#c1
Reported-by: Ian Pilcher <arequipeno@gmail.com>
Tested-by: Ian Pilcher <arequipeno@gmail.com>
Tested-by: Justin Gatzen <justin.gatzen@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Fixed compiler warning:
drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c:16:5: warning: no previous
prototype for function 'vfio_fsl_mc_irqs_allocate' [-Wmissing-prototypes]
^
drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c:16:1: note: declare 'static'
if the function is not intended to be used outside of this translation unit
int vfio_fsl_mc_irqs_allocate(struct vfio_fsl_mc_device *vdev)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
My static analsysis tool complains that the "index" can be negative.
There are some checks in do_mmap() which try to prevent underflows but
I don't know if they are sufficient for this situation. Either way,
making "index" unsigned is harmless so let's do it just to be safe.
Fixes: 67247289688d ("vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The copy_to_user() function returns the number of bytes remaining to be
copied, but this code should return -EFAULT.
Fixes: df747bcd5b21 ("vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
When attaching a new group to the container, let's use the new helper
vfio_iommu_find_iommu_group() to check if it's already attached. There
is no functional change.
Also take this chance to add a missing blank line.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Pull VFIO updates from Alex Williamson:
- New fsl-mc vfio bus driver supporting userspace drivers of objects
within NXP's DPAA2 architecture (Diana Craciun)
- Support for exposing zPCI information on s390 (Matthew Rosato)
- Fixes for "detached" VFs on s390 (Matthew Rosato)
- Fixes for pin-pages and dma-rw accesses (Yan Zhao)
- Cleanups and optimize vconfig regen (Zenghui Yu)
- Fix duplicate irq-bypass token registration (Alex Williamson)
* tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
vfio/pci: Clear token on bypass registration failure
vfio/fsl-mc: fix the return of the uninitialized variable ret
vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger
vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit
MAINTAINERS: Add entry for s390 vfio-pci
vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO
vfio/fsl-mc: Add support for device reset
vfio/fsl-mc: Add read/write support for fsl-mc devices
vfio/fsl-mc: trigger an interrupt via eventfd
vfio/fsl-mc: Add irq infrastructure for fsl-mc devices
vfio/fsl-mc: Added lock support in preparation for interrupt handling
vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions
vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call
vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl
vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind
vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO
s390/pci: track whether util_str is valid in the zpci_dev
s390/pci: stash version in the zpci_dev
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
...
|
|
pfn is not added to pfn_list when vfio_add_to_pfn_list fails.
vfio_unpin_page_external will exit directly without calling
vfio_iova_put_vfio_pfn. This will lead to a memory leak.
Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
Signed-off-by: Xiaoyang Xu <xuxiaoyang2@huawei.com>
[aw: simplified logic, add Fixes]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The eventfd context is used as our irqbypass token, therefore if an
eventfd is re-used, our token is the same. The irqbypass code will
return an -EBUSY in this case, but we'll still attempt to unregister
the producer, where if that duplicate token still exists, results in
removing the wrong object. Clear the token of failed producers so
that they harmlessly fall out when unregistered.
Fixes: 6d7425f109d2 ("vfio: Register/unregister irq_bypass_producer")
Reported-by: guomin chen <guomin_chen@sina.com>
Tested-by: guomin chen <guomin_chen@sina.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The vfio_fsl_mc_reflck_attach function may return, on success path,
an uninitialized variable. Fix the problem by initializing the return
variable to 0.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: f2ba7e8c947b ("vfio/fsl-mc: Added lock support in preparation for interrupt handling")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The preceding patches have ensured that core dumping properly takes the
mmap_lock. Thanks to that, we can now remove mmget_still_valid() and all
its users.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-8-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Static analysis discovered that some code in vfio_fsl_mc_set_irq_trigger
is dead code. Fixed the code by changing the conditions order.
Fixes: cc0ee20bd969 ("vfio/fsl-mc: trigger an interrupt via eventfd")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The FSL_MC_BUS on which the VFIO-FSL-MC driver is dependent on
can be compiled on other architectures as well (not only ARM64)
including 32 bit architectures.
Include linux/io-64-nonatomic-hi-lo.h to make writeq/readq used
in the driver available on 32bit platforms.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
v5.10/vfio/next
|
|
Define a new configuration entry VFIO_PCI_ZDEV for VFIO/PCI.
When this s390-only feature is configured we add capabilities to the
VFIO_DEVICE_GET_INFO ioctl that describe features of the associated
zPCI device and its underlying hardware.
This patch is based on work previously done by Pierre Morel.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Currently only resetting the DPRC container is supported which
will reset all the objects inside it. Resetting individual
objects is possible from the userspace by issueing commands
towards MC firmware.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The software uses a memory-mapped I/O command interface (MC portals) to
communicate with the MC hardware. This command interface is used to
discover, enumerate, configure and remove DPAA2 objects. The DPAA2
objects use MSIs, so the command interface needs to be emulated
such that the correct MSI is configured in the hardware (the guest
has the virtual MSIs).
This patch is adding read/write support for fsl-mc devices. The mc
commands are emulated by the userspace. The host is just passing
the correct command to the hardware.
Also the current patch limits userspace to write complete
64byte command once and read 64byte response by one ioctl.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This patch allows to set an eventfd for fsl-mc device interrupts
and also to trigger the interrupt eventfd from userspace for testing.
All fsl-mc device interrupts are MSIs. The MSIs are allocated from
the MSI domain only once per DPRC and used by all the DPAA2 objects.
The interrupts are managed by the DPRC in a pool of interrupts. Each
device requests interrupts from this pool. The pool is allocated
when the first virtual device is setting the interrupts.
The pool of interrupts is protected by a lock.
The DPRC has an interrupt of its own which indicates if the DPRC
contents have changed. However, currently, the contents of a DPRC
assigned to the guest cannot be changed at runtime, so this interrupt
is not configured.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This patch adds the skeleton for interrupt support
for fsl-mc devices. The interrupts are not yet functional,
the functionality will be added by subsequent patches.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Only the DPRC object allocates interrupts from the MSI
interrupt domain. The interrupts are managed by the DPRC in
a pool of interrupts. The access to this pool of interrupts
has to be protected with a lock.
This patch extends the current lock implementation to have a
lock per DPRC.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Allow userspace to mmap device regions for direct access of
fsl-mc devices.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Expose to userspace information about the memory regions.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Allow userspace to get fsl-mc device info (number of regions
and irqs).
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The DPRC (Data Path Resource Container) device is a bus device and has
child devices attached to it. When the vfio-fsl-mc driver is probed
the DPRC is scanned and the child devices discovered and initialized.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
DPAA2 (Data Path Acceleration Architecture) consists in
mechanisms for processing Ethernet packets, queue management,
accelerators, etc.
The Management Complex (mc) is a hardware entity that manages the DPAA2
hardware resources. It provides an object-based abstraction for software
drivers to use the DPAA2 hardware. The MC mediates operations such as
create, discover, destroy of DPAA2 objects.
The MC provides memory-mapped I/O command interfaces (MC portals) which
DPAA2 software drivers use to operate on DPAA2 objects.
A DPRC is a container object that holds other types of DPAA2 objects.
Each object in the DPRC is a Linux device and bound to a driver.
The MC-bus driver is a platform driver (different from PCI or platform
bus). The DPRC driver does runtime management of a bus instance. It
performs the initial scan of the DPRC and handles changes in the DPRC
configuration (adding/removing objects).
All objects inside a container share the same hardware isolation
context, meaning that only an entire DPRC can be assigned to
a virtual machine.
When a container is assigned to a virtual machine, all the objects
within that container are assigned to that virtual machine.
The DPRC container assigned to the virtual machine is not allowed
to change contents (add/remove objects) by the guest. The restriction
is set by the host and enforced by the mc hardware.
The DPAA2 objects can be directly assigned to the guest. However
the MC portals (the memory mapped command interface to the MC) need
to be emulated because there are commands that configure the
interrupts and the isolation IDs which are virtual in the guest.
Example:
echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override
echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind
The dprc.2 is bound to the VFIO driver and all the objects within
dprc.2 are going to be bound to the VFIO driver.
This patch adds the infrastructure for VFIO support for fsl-mc
devices. Subsequent patches will add support for binding and secure
assigning these devices using VFIO.
More details about the DPAA2 objects can be found here:
Documentation/networking/device_drivers/freescale/dpaa2/overview.rst
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
'v5.10/vfio/misc', 'v5.10/vfio/no-cmd-mem' and 'v5.10/vfio/yan_zhao_fixes' into v5.10/vfio/next
|
|
The count of dirtied pages is not only determined by count of copied
pages, but also by the start offset.
e.g. if offset = PAGE_SIZE - 1, and *copied=2, the dirty pages count
is 2, instead of 1 or 0.
Fixes: d6a4c185660c ("vfio iommu: Implementation of ioctl for dirty pages tracking")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
When error occurs, need to put vfio group after a successful get.
Fixes: 95fc87b44104 ("vfio: Selective dirty page tracking if IOMMU backed device pins pages")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
While it is true that devices with is_virtfn=1 will have a Memory Space
Enable bit that is hard-wired to 0, this is not the only case where we
see this behavior -- For example some bare-metal hypervisors lack
Memory Space Enable bit emulation for devices not setting is_virtfn
(s390). Fix this by instead checking for the newly-added
no_command_memory bit which directly denotes the need for
PCI_COMMAND_MEMORY emulation in vfio.
Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Commit 492855939bdb ("vfio/type1: Limit DMA mappings per container")
added the ability to limit the number of memory backed DMA mappings.
However on s390x, when lazy mapping is in use, we use a very large
number of concurrent mappings. Let's provide the current allowable
number of DMA mappings to userspace via the IOMMU info chain so that
userspace can take appropriate mitigation.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Page pinning is used both to translate and pin device mappings for DMA
purpose, as well as to indicate to the IOMMU backend to limit the dirty
page scope to those pages that have been pinned, in the case of an IOMMU
backed device.
To support this, the vfio_pin_pages() interface limits itself to only
singleton groups such that the IOMMU backend can consider dirty page
scope only at the group level. Implement the same requirement for the
vfio_group_pin_pages() interface.
Fixes: 95fc87b44104 ("vfio: Selective dirty page tracking if IOMMU backed device pins pages")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Now we regenerate vconfig for all the BARs via vfio_bar_fixup(), every
time any offset of any of them are read. Though BARs aren't re-read
regularly, the regeneration can be avoided if no BARs had been written
since they were last read, in which case vdev->bardirty is false.
Let's return immediately in vfio_bar_fixup() if bardirty is false.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
It was added by commit 137e5531351d ("vfio/pci: Add sriov_configure
support") but duplicates a forward declaration earlier in the file.
Remove it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
To keep naming consistent we should stick with *iotlb*. This patch
renames a few remaining functions.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Link: https://lore.kernel.org/r/20200817210051.13546-1-murphyt7@tcd.ie
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
The vfio_iommu_replay() function does not currently unwind on error,
yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma
structure to indicate IOMMU mapping. The IOMMU mappings are torn down
when the domain is destroyed, but the other actions go on to cause
trouble later. For example, the iommu->domain_list can be empty if we
only have a non-IOMMU backed mdev attached. We don't currently check
if the list is empty before getting the first entry in the list, which
leads to a bogus domain pointer. If a vfio_dma entry is erroneously
marked as iommu_mapped, we'll attempt to use that bogus pointer to
retrieve the existing physical page addresses.
This is the scenario that uncovered this issue, attempting to hot-add
a vfio-pci device to a container with an existing mdev device and DMA
mappings, one of which could not be pinned, causing a failure adding
the new group to the existing container and setting the conditions
for a subsequent attempt to explode.
To resolve this, we can first check if the domain_list is empty so
that we can reject replay of a bogus domain, should we ever encounter
this inconsistent state again in the future. The real fix though is
to add the necessary unwind support, which means cleaning up the
current pinning if an IOMMU mapping fails, then walking back through
the r-b tree of DMA entries, reading from the IOMMU which ranges are
mapped, and unmapping and unpinning those ranges. To be able to do
this, we also defer marking the DMA entry as IOMMU mapped until all
entries are processed, in order to allow the unwind to know the
disposition of each entry.
Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
A down_read on memory_lock is held when performing read/write accesses
to MMIO BAR space, including across the copy_to/from_user() callouts
which may fault. If the user buffer for these copies resides in an
mmap of device MMIO space, the mmap fault handler will acquire a
recursive read-lock on memory_lock. Avoid this by reducing the lock
granularity. Sequential accesses requiring multiple ioread/iowrite
cycles are expected to be rare, therefore typical accesses should not
see additional overhead.
VGA MMIO accesses are expected to be non-fatal regardless of the PCI
memory enable bit to allow legacy probing, this behavior remains with
a comment added. ioeventfds are now included in memory access testing,
with writes dropped while memory space is disabled.
Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Pull VFIO updates from Alex Williamson:
- Inclusive naming updates (Alex Williamson)
- Intel X550 INTx quirk (Alex Williamson)
- Error path resched between unmaps (Xiang Zheng)
- SPAPR IOMMU pin_user_pages() conversion (John Hubbard)
- Trivial mutex simplification (Alex Williamson)
- QAT device denylist (Giovanni Cabiddu)
- type1 IOMMU ioctl refactor (Liu Yi L)
* tag 'vfio-v5.9-rc1' of git://github.com/awilliam/linux-vfio:
vfio/type1: Refactor vfio_iommu_type1_ioctl()
vfio/pci: Add QAT devices to denylist
vfio/pci: Add device denylist
PCI: Add Intel QuickAssist device IDs
vfio/pci: Hold igate across releasing eventfd contexts
vfio/spapr_tce: convert get_user_pages() --> pin_user_pages()
vfio/type1: Add conditional rescheduling after iommu map failed
vfio/pci: Add Intel X550 to hidden INTx devices
vfio: Cleanup allowed driver naming
|
|
After the cleanup of page fault accounting, gup does not need to pass
task_struct around any more. Remove that parameter in the whole gup
stack.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch refactors the vfio_iommu_type1_ioctl() to use switch instead of
if-else, and each command got a helper function.
Cc: Kevin Tian <kevin.tian@intel.com>
CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|