Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch introduces an attribute for vDPA device to indicate
whether virtual address can be used. If vDPA device driver set
it, vhost-vdpa bus driver will not pin user page and transfer
userspace virtual address instead of physical address during
DMA mapping. And corresponding vma->vm_file and offset will be
also passed as an opaque pointer.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add an opaque pointer for DMA mapping.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-9-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This adds a new callback to support device specific reset
behavior. The vdpa bus driver will call the reset function
instead of setting status to zero during resetting.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210831103634.33-6-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The size passed to alloc_iova() should be the size of page frames.
Now we use byte granularity for the iova domain, so it's safe to
pass the size in bytes to alloc_iova(). But it would be better to use
iova_shift() for the size to avoid future bugs if we change granularity.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210809100923.38-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The vdpa_alloc_device() returns an error pointer upon
failure, not NULL. To handle the failure correctly, this
replaces NULL check with IS_ERR() check and propagate the
error upwards.
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210715080026.242-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
This patch extends the vdpa_vq_state to support packed virtqueue
state which is basically the device/driver ring wrap counters and the
avail and used index. This will be used for the virito-vdpa support
for the packed virtqueue and the future vhost/vhost-vdpa support for
the packed virtqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602021536.39525-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
|
|
In commit 7d189f617f83f ("vdpa_sim_blk: implement ramdisk behaviour")
linux/blkdev.h was included here causing the duplicate include.
Remove the later duplicate include.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20210510024307.7143-1-wanjiabing@vivo.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Enable the user to create vDPA block simulator devices using the
vdpa management tool:
# Show vDPA supported devices
$ vdpa mgmtdev show
vdpasim_blk:
supported_classes block
# Create a vDPA block device named as 'blk0' from the management
# device vdpasim:
$ vdpa dev add mgmtdev vdpasim_blk name blk0
# Show the info of the 'blk0' device just created
$ vdpa dev show blk0 -jp
{
"dev": {
"blk0": {
"type": "block",
"mgmtdev": "vdpasim_blk",
"vendor_id": 0,
"max_vqs": 1,
"max_vq_size": 256
}
}
}
# Delete the vDPA device after its use
$ vdpa dev del blk0
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-15-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Handle VIRTIO_BLK_T_GET_ID request, always answering the
"vdpa_blk_sim" string.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-14-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The previous implementation wrote only the status of each request.
This patch implements a more accurate block device simulator,
providing a ramdisk-like behavior and adding input validation.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-13-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This will allow running vDPA for virtio block protocol.
It's a preliminary implementation with a simple request handling:
for each request, only the status (last byte) is set.
It's always set to VIRTIO_BLK_S_OK.
Also input validation is missing and will be added in the next commits.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: various cleanups/fixes]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-12-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This new callback is used to get the size of the configuration space
of vDPA devices.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-9-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
vringh_getdesc_iotlb() allocates memory to store the kvec, that
is freed with vringh_kiov_cleanup().
vringh_getdesc_iotlb() is able to reuse a kvec previously allocated,
so in order to avoid to allocate the kvec for each request, we are
not calling vringh_kiov_cleanup() when we finished to handle a
request, but we should call it when we free the entire device.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-8-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Usually iotlb accesses are synchronized with a spinlock.
Let's request it as a new parameter in vringh_set_iotlb() and
hold it when we navigate the iotlb in iotlb_translate() to avoid
race conditions with any new additions/deletions of ranges from
the ioltb.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The identical mapping used until now created issues when mapping
different virtual pages with the same physical address.
To solve this issue, we can use the iova module, to handle the IOVA
allocation.
For simplicity we use an IOVA allocator with byte granularity.
We add two new functions, vdpasim_map_range() and vdpasim_unmap_range(),
to handle the IOVA allocation and the registration into the IOMMU/IOTLB.
These functions are used by dma_map_ops callbacks.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Typecasting from void* to virtio_net_config* is not needed.
Remove it.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210213183951.248324-1-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch delay the queue number setting to vDPA device
registering. This allows us to probe the virtqueue numbers between
device allocation and registering.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210223061905.422659-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Enable user to create vdpasim net simulate devices.
Show vdpa management device that supports creating, deleting vdpa devices.
$ vdpa mgmtdev show
vdpasim_net:
supported_classes
net
$ vdpa mgmtdev show -jp
{
"show": {
"vdpasim_net": {
"supported_classes": {
"net"
}
}
}
Create a vdpa device of type networking named as "foo2" from
the management device vdpasim:
$ vdpa dev add mgmtdev vdpasim_net name foo2
Show the newly created vdpa device by its name:
$ vdpa dev show foo2
foo2: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 2 max_vq_size 256
$ vdpa dev show foo2 -jp
{
"dev": {
"foo2": {
"type": "network",
"mgmtdev": "vdpasim_net",
"vendor_id": 0,
"max_vqs": 2,
"max_vq_size": 256
}
}
}
Delete the vdpa device after its use:
$ vdpa dev del foo2
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-7-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In a subsequent patch, when user initiated command creates a vdpa device,
the user chooses the name of the vdpa device.
To support it, extend the device allocation API to consider this name
specified by the caller driver.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-3-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
MAC address array is used only in vdpa_sim_net.c.
Hence, keep it static.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-2-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Introduce new vdpa_sim_net and vdpa_sim (core) drivers. This is a
preparation for adding a vdpa simulator module for block devices.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: various cleanups/fixes]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-19-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vringh_getdesc_iotlb() manages 2 iovs for writable and readable
descriptors. This is very useful for the block device, where for
each request we have both types of descriptor.
Let's split the vdpasim_virtqueue's iov field in out_iov and
in_iov to use them with vringh_getdesc_iotlb().
We are using VIRTIO terminology for "out" (readable by the device)
and "in" (writable by the device) descriptors.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-18-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Allow each device to specify the size of the buffer allocated
in vdpa_sim.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-17-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The next patch will make the buffer size configurable from each
device.
Since the buffer could be larger than a page, we use kvmalloc()
instead of kmalloc().
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-16-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of calling the vq callback directly, we can leverage the
vringh_notify() function, adding vdpasim_vq_notify() and setting it
in the vringh notify callback.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-15-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The set_config callback can be used by the device to parse the
config structure modified by the driver.
The callback will be invoked, if set, in vdpasim_set_config() after
copying bytes from caller buffer into vdpasim->config buffer.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-14-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The get_config callback can be used by the device to fill the
config structure.
The callback will be invoked in vdpasim_get_config() before copying
bytes into caller buffer.
Move vDPA-net config updates from vdpasim_set_features() in the
new vdpasim_net_get_config() callback.
This is safe since in vdpa_get_config() we already check that
.set_features() callback is called before .get_config().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-13-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add new 'config_size' attribute in 'vdpasim_dev_attr' and allocates
'config' dynamically to support any device types.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-12-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As preparation for the next patches, we store the MAC address,
parsed during the vdpasim_create(), in a buffer that will be used
to fill 'config' together with other configurations.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-11-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Rename vdpasim_work() in vdpasim_net_work() and add it to
the vdpasim_dev_attr structure.
Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-10-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Introduce a new VDPASIM_FEATURES macro with the generic features
supported by the vDPA simulator, and VDPASIM_NET_FEATURES macro with
vDPA-net features.
Add 'supported_features' field in vdpasim_dev_attr, to allow devices
to specify their features.
Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-9-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Remove VDPASIM_DEVICE_ID macro and add 'id' field in vdpasim_dev_attr,
that will be returned by vdpasim_get_device_id().
Use VIRTIO_ID_NET for vDPA-net simulator device id.
Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-8-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vdpasim_dev_attr will contain device specific attributes. We starting
moving the number of virtqueues (i.e. nvqs) to vdpasim_dev_attr.
vdpasim_create() creates a new vDPA simulator following the device
attributes defined in the vdpasim_dev_attr parameter.
Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-7-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
These variables store generic callbacks used by the vDPA simulator
core, so we can remove the 'net' word in their names.
Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-6-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Some devices may require a higher limit for the number of IOTLB
entries, so let's make it configurable through a module parameter.
By default, it's initialized with the current limit (2048).
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-5-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add a new attribute that will define the number of virt queues to be
created for the vdpasim device.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: replace kmalloc_array() with kcalloc()]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-4-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Some headers are not necessary, so let's remove them to do
some cleaning.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull vhost fixes from Michael Tsirkin:
"Fixes all over the place.
A new UAPI is borderline: can also be considered a new feature but
also seems to be the only way we could come up with to fix addressing
for userspace - and it seems important to switch to it now before
userspace making assumptions about addressing ability of devices is
set in stone"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpasim: allow to assign a MAC address
vdpasim: fix MAC address configuration
vdpa: handle irq bypass register failure case
vdpa_sim: Fix DMA mask
Revert "vhost-vdpa: fix page pinning leakage in error path"
vdpa/mlx5: Fix error return in map_direct_mr()
vhost_vdpa: Return -EFAULT if copy_from_user() fails
vdpa_sim: implement get_iova_range()
vhost: vdpa: report iova range
vdpa: introduce config op to get valid iova range
|
|
Add macaddr parameter to the module to set the MAC address to use
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201029122050.776445-3-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
vdpa_sim generates a ramdom MAC address but it is never used by upper
layers because the VIRTIO_NET_F_MAC bit is not set in the features list.
Because of that, virtio-net always regenerates a random MAC address each
time it is loaded whereas the address should only change on vdpa_sim
load/unload.
Fix that by adding VIRTIO_NET_F_MAC in the features list of vdpa_sim.
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Cc: jasowang@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201029122050.776445-2-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Since commit f959dcd6ddfd
("dma-direct: Fix potential NULL pointer dereference")
an error is reported when we load vdpa_sim and virtio-vdpa:
[ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12
It seems that dma_mask is not initialized.
This patch initializes dma_mask() and calls dma_set_mask_and_coherent()
to fix the problem.
Full log:
[ 128.548628] ------------[ cut here ]------------
[ 128.553268] WARNING: CPU: 23 PID: 1105 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x14c/0x1d0
[ 128.562139] Modules linked in: virtio_net net_failover failover virtio_vdpa vdpa_sim vringh vhost_iotlb vdpa xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi rfkill intel_rapl_msr intel_rapl_common isst_if_common sunrpc skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm mgag200 i2c_algo_bit irqbypass drm_kms_helper crct10dif_pclmul crc32_pclmul syscopyarea ghash_clmulni_intel iTCO_wdt sysfillrect iTCO_vendor_support sysimgblt rapl fb_sys_fops dcdbas intel_cstate drm acpi_ipmi ipmi_si mei_me dell_smbios intel_uncore ipmi_devintf mei i2c_i801 dell_wmi_descriptor wmi_bmof pcspkr lpc_ich i2c_smbus ipmi_msghandler acpi_power_meter ip_tables xfs libcrc32c sd_mod t10_pi sg ahci libahci libata megaraid_sas tg3 crc32c_intel wmi dm_mirror dm_region_hash dm_log
[ 128.562188] dm_mod
[ 128.651334] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59
[ 128.659939] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020
[ 128.667419] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0
[ 128.672384] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa
[ 128.691131] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246
[ 128.696357] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000
[ 128.703488] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000
[ 128.710620] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000
[ 128.717754] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8
[ 128.724886] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940
[ 128.732020] FS: 00007f887bae23c0(0000) GS:ffff9e4ac01c0000(0000) knlGS:0000000000000000
[ 128.740105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 128.745852] CR2: 0000562bc09de998 CR3: 00000003c156c006 CR4: 00000000007706e0
[ 128.752982] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 128.760114] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 128.767247] PKRU: 55555554
[ 128.769961] Call Trace:
[ 128.772418] virtqueue_add+0x81e/0xb00
[ 128.776176] virtqueue_add_inbuf_ctx+0x26/0x30
[ 128.780625] try_fill_recv+0x3a2/0x6e0 [virtio_net]
[ 128.785509] virtnet_open+0xf9/0x180 [virtio_net]
[ 128.790217] __dev_open+0xe8/0x180
[ 128.793620] __dev_change_flags+0x1a7/0x210
[ 128.797808] dev_change_flags+0x21/0x60
[ 128.801646] do_setlink+0x328/0x10e0
[ 128.805227] ? __nla_validate_parse+0x121/0x180
[ 128.809757] ? __nla_parse+0x21/0x30
[ 128.813338] ? inet6_validate_link_af+0x5c/0xf0
[ 128.817871] ? cpumask_next+0x17/0x20
[ 128.821535] ? __snmp6_fill_stats64.isra.54+0x6b/0x110
[ 128.826676] ? __nla_validate_parse+0x47/0x180
[ 128.831120] __rtnl_newlink+0x541/0x8e0
[ 128.834962] ? __nla_reserve+0x38/0x50
[ 128.838713] ? security_sock_rcv_skb+0x2a/0x40
[ 128.843158] ? netlink_deliver_tap+0x2c/0x1e0
[ 128.847518] ? netlink_attachskb+0x1d8/0x220
[ 128.851793] ? skb_queue_tail+0x1b/0x50
[ 128.855641] ? fib6_clean_node+0x43/0x170
[ 128.859652] ? _cond_resched+0x15/0x30
[ 128.863406] ? kmem_cache_alloc_trace+0x3a3/0x420
[ 128.868110] rtnl_newlink+0x43/0x60
[ 128.871602] rtnetlink_rcv_msg+0x12c/0x380
[ 128.875701] ? rtnl_calcit.isra.39+0x110/0x110
[ 128.880147] netlink_rcv_skb+0x50/0x100
[ 128.883987] netlink_unicast+0x1a5/0x280
[ 128.887913] netlink_sendmsg+0x23d/0x470
[ 128.891839] sock_sendmsg+0x5b/0x60
[ 128.895331] ____sys_sendmsg+0x1ef/0x260
[ 128.899255] ? copy_msghdr_from_user+0x5c/0x90
[ 128.903702] ___sys_sendmsg+0x7c/0xc0
[ 128.907369] ? dev_forward_change+0x130/0x130
[ 128.911731] ? sysctl_head_finish.part.29+0x24/0x40
[ 128.916616] ? new_sync_write+0x11f/0x1b0
[ 128.920628] ? mntput_no_expire+0x47/0x240
[ 128.924727] __sys_sendmsg+0x57/0xa0
[ 128.928309] do_syscall_64+0x33/0x40
[ 128.931887] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 128.936937] RIP: 0033:0x7f88792e3857
[ 128.940518] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48
[ 128.959263] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 128.966827] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857
[ 128.973960] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c
[ 128.981095] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000
[ 128.988224] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000
[ 128.995357] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c
[ 129.002492] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59
[ 129.011093] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020
[ 129.018571] Call Trace:
[ 129.021027] dump_stack+0x57/0x6a
[ 129.024346] __warn.cold.14+0xe/0x3d
[ 129.027925] ? dma_map_page_attrs+0x14c/0x1d0
[ 129.032283] report_bug+0xbd/0xf0
[ 129.035602] handle_bug+0x44/0x80
[ 129.038922] exc_invalid_op+0x13/0x60
[ 129.042589] asm_exc_invalid_op+0x12/0x20
[ 129.046602] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0
[ 129.051566] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa
[ 129.070311] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246
[ 129.075536] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000
[ 129.082669] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000
[ 129.089803] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000
[ 129.096936] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8
[ 129.104068] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940
[ 129.111200] virtqueue_add+0x81e/0xb00
[ 129.114952] virtqueue_add_inbuf_ctx+0x26/0x30
[ 129.119399] try_fill_recv+0x3a2/0x6e0 [virtio_net]
[ 129.124280] virtnet_open+0xf9/0x180 [virtio_net]
[ 129.128984] __dev_open+0xe8/0x180
[ 129.132390] __dev_change_flags+0x1a7/0x210
[ 129.136575] dev_change_flags+0x21/0x60
[ 129.140415] do_setlink+0x328/0x10e0
[ 129.143994] ? __nla_validate_parse+0x121/0x180
[ 129.148528] ? __nla_parse+0x21/0x30
[ 129.152107] ? inet6_validate_link_af+0x5c/0xf0
[ 129.156639] ? cpumask_next+0x17/0x20
[ 129.160306] ? __snmp6_fill_stats64.isra.54+0x6b/0x110
[ 129.165443] ? __nla_validate_parse+0x47/0x180
[ 129.169890] __rtnl_newlink+0x541/0x8e0
[ 129.173731] ? __nla_reserve+0x38/0x50
[ 129.177483] ? security_sock_rcv_skb+0x2a/0x40
[ 129.181928] ? netlink_deliver_tap+0x2c/0x1e0
[ 129.186286] ? netlink_attachskb+0x1d8/0x220
[ 129.190560] ? skb_queue_tail+0x1b/0x50
[ 129.194401] ? fib6_clean_node+0x43/0x170
[ 129.198411] ? _cond_resched+0x15/0x30
[ 129.202163] ? kmem_cache_alloc_trace+0x3a3/0x420
[ 129.206869] rtnl_newlink+0x43/0x60
[ 129.210361] rtnetlink_rcv_msg+0x12c/0x380
[ 129.214462] ? rtnl_calcit.isra.39+0x110/0x110
[ 129.218908] netlink_rcv_skb+0x50/0x100
[ 129.222747] netlink_unicast+0x1a5/0x280
[ 129.226672] netlink_sendmsg+0x23d/0x470
[ 129.230599] sock_sendmsg+0x5b/0x60
[ 129.234090] ____sys_sendmsg+0x1ef/0x260
[ 129.238015] ? copy_msghdr_from_user+0x5c/0x90
[ 129.242461] ___sys_sendmsg+0x7c/0xc0
[ 129.246128] ? dev_forward_change+0x130/0x130
[ 129.250487] ? sysctl_head_finish.part.29+0x24/0x40
[ 129.255368] ? new_sync_write+0x11f/0x1b0
[ 129.259381] ? mntput_no_expire+0x47/0x240
[ 129.263478] __sys_sendmsg+0x57/0xa0
[ 129.267058] do_syscall_64+0x33/0x40
[ 129.270639] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 129.275689] RIP: 0033:0x7f88792e3857
[ 129.279268] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48
[ 129.298015] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 129.305581] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857
[ 129.312712] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c
[ 129.319846] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000
[ 129.326978] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000
[ 129.334109] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c
[ 129.341249] ---[ end trace c551e8028fbaf59d ]---
[ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12
[ 129.360445] net eth0: Unexpected TXQ (0) queue failure: -12
[ 129.824428] net eth0: Unexpected TXQ (0) queue failure: -12
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201027175914.689278-1-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This implements a sample get_iova_range() for the simulator which
advertise [0, ULLONG_MAX] as the valid range.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20201023090043.14430-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If "offset" is non-zero then we end up copying from beyond the end of
the config because of pointer math. We can fix this by casting the
struct to a u8 pointer.
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200406144552.GF68494@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The patch adding the iommu lock did not initialize it.
The struct is zero-initialized so this is mostly a problem
when using lockdep.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Fixes: 0ea9ee430e74 ("vdpasim: protect concurrent access to iommu iotlb")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Modify get_vq_state() so it returns an error code. In case of hardware
acceleration, the available index may be retrieved from the device, an
operation that can possibly fail.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Link: https://lore.kernel.org/r/20200804162048.22587-9-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
For now VQ state involves 16 bit available index value encoded in u64
variable. In the future it will be extended to contain more fields. Use
struct to contain the state, now containing only a single u16 for the
available index. In the future we can add fields to this struct.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Link: https://lore.kernel.org/r/20200804162048.22587-8-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This will enable vdpa providers to add support for multi queue feature
and publish it to upper layers (vhost and virtio).
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200804162048.22587-7-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The vDPA simulator support both set_map() and dma_map()/dma_unmap()
operations. But vhost-vdpa can only use one of them. So this patch
introduce a module parameter (batch_mapping) that let vpda_sim to
support only one of those dma operations. The batched mapping via
set_map() is enabled by default.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200804162048.22587-6-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Iommu iotlb can be accessed by different cores for performing IO using
multiple virt queues. Add a spinlock to synchronize iotlb accesses.
This could be easily reproduced when using more than 1 pktgen threads
to inject traffic to vdpa simulator.
Fixes: 2c53d0f64c06f("vdpasim: vDPA device simulator")
Cc: stable@vger.kernel.org
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200731073822.13326-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|