summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2005-06-27Merge 'upstream' branch of ↵Linus Torvalds3-2/+4
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-06-27Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input.git manuallyLinus Torvalds21-779/+1231
Some manual fixups required due to clashes with the PF_FREEZE cleanups.
2005-06-27[PATCH] NETDEV: fix receiving multicast frames.YOSHIFUJI Hideaki2-2/+2
Some USB ethernet drivers did not accept multicast frames appropriately. IPv6 did not work with those drivers without this patch. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-06-27[PATCH] NETDEV: Elecom (Laneed) LD-USBL/TX support.YOSHIFUJI Hideaki1-0/+2
Elecom (Laneed) LD-USBL/TX support. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-06-25[PATCH] Cleanup patch for process freezingChristoph Lameter3-6/+3
1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] better USB_MON dependenciesAdrian Bunk4-12/+7
This makes the USB_MON less confusing. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] pwc-uncompress warning fixAndrew Morton1-6/+5
drivers/usb/media/pwc/pwc-uncompress.c: In function `pwc_decompress': drivers/usb/media/pwc/pwc-uncompress.c:140: warning: unreachable code at beginning of switch statement Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] remove duplicate get_dentry functions in various placesChristoph Hellwig1-12/+1
Various filesystem drivers have grown a get_dentry() function that's a duplicate of lookup_one_len, except that it doesn't take a maximum length argument and doesn't check for \0 or / in the passed in filename. Switch all these places to use lookup_one_len. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Greg KH <greg@kroah.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22[PATCH] USB: fix hid core to return proper error code from probeStelian Pop1-2/+2
Drivers need to return -ENODEV when they can't bind to a device. Anything else stops the "bind a device to a driver" search. From: Stelian Pop <stelian@popies.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] USB: fix show_modalias() function due to attribute changeGreg Kroah-Hartman1-1/+1
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Driver Core: drivers/usb/input/aiptek.c - ↵Yani Ioannou7-65/+65
drivers/zorro/zorro-sysfs.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Driver Core: drivers/s390/net/qeth_sys.c - ↵Yani Ioannou5-22/+22
drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] usbcore: Don't call device_release_driver recursivelyAlan Stern1-2/+8
This patch fixes usb_driver_release_interface() to make it avoid calling device_release_driver() recursively, i.e., when invoked from within the disconnect routine for the same device. The patch applies to your "driver" tree. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] usb: klist_node_attached() fixPatrick Mochel1-1/+1
The original code looks like this: /* if interface was already added, bind now; else let * the future device_add() bind it, bypassing probe() */ if (!list_empty (&dev->bus_list)) device_bind_driver(dev); IOW, it's checking to see if the device is attached to the bus or not and binding the driver if it is. It's checking the device's bus list, which will only appear empty when the device has been initialized, but not added. It depends way too much on the driver model internals, but it seems to be the only way to do the weird crap they want to do with interfaces. When I converted it to use klists, I accidentally inverted the logic, which led to bad things happening. This patch returns the check to its orginal value. From: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/core/usb.c ===================================================================
2005-06-20[PATCH] USB: fix build warning in usb core as pointed out by Andrew.gregkh@suse.de1-1/+1
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/core/usb.c ===================================================================
2005-06-20[PATCH] Fix up USB to use klist_node_attached() instead of list_empty() on ↵mochel@digitalimplant.org1-2/+2
lists that will go away. Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/core/usb.c ===================================================================
2005-06-20[PATCH] Use driver_for_each_device() instead of manually walking list.mochel@digitalimplant.org1-18/+23
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/core/usb.c ===================================================================
2005-06-20[PATCH] USB: trivial error path fixMark M. Hoffman1-0/+1
Trivial fix to USB class-creation error path; please apply. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] class: convert drivers/* to use the new class api instead of ↵gregkh@suse.de1-6/+6
class_simple Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] USB: move the usb hcd code to use the new class code.gregkh@suse.de3-44/+37
This moves a kref into the main hcd structure, which detaches it from the class device structure. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] make driver's name be const char *Dmitry Torokhov1-1/+1
Driver core: change driver's, bus's, class's and platform device's names to be const char * so one can use const char *drv_name = "asdfg"; when initializing structures. Also kill couple of whitespaces. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-17merge by hand (fix up qla_os.c merge error)James Bottomley1-9/+0
2005-06-17[SCSI] allow sleeping in ->eh_bus_reset_handler()Jeff Garzik1-3/+0
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_device_reset_handler()Jeff Garzik1-4/+0
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_abort_handler()Jeff Garzik1-2/+0
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-16[PATCH] fix for kaweth broken by changes in the networking layerOliver Neukum1-1/+1
Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-13[PATCH] spin longer for ehci port reset completionDavid Brownell1-1/+4
This makes the EHCI driver spin a bit longer before concluding that the port reset failed. "Obviously safe." It allows some devices to enumerate that previously didn't. We've seen a bunch of these problem reports recently, this will make some go away. As reported by Michael Zapf <Michael.Zapf@uni-kassel.de>, some EHCI controllers seem to take forever to finish port resets and produce "port N reset error -110" type errors. Spinning a bit longer helps. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-12[PATCH] pwc bug fixAlan Cox1-4/+0
The pwc chainsaw session left some setups not working. There is a sanity check on compression buffers that simply isn't right any more as we never allocate one. This doesn't address the email and other changes. I'll do those tomorrow if I get time, but it is the minimal fix for the code and basic feature set. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-09[PATCH] USB: ftdi_sio: avoid losing received data in tty-ldiscIan Abbott1-27/+91
ftdi_sio: Avoid losing bytes at tty-ldisc. This patch was originally developed by Daniel Smertnig. I (Ian Abbott) made a few changes. It has been tested by both Daniel and I, at least for raw, non-canonical receive data processing. Here is Daniel's original description of the patch: === During a project in which I was using a FTDI 232BM to transmit data at relative high speeds (625kBit/s), I noticed a problem where data was lost even if flow control was enabled: The FTDI-Driver receives 512 Bytes of data over USB at a time, which consists of 8 64-Byte packets. Subtracting the 2 bytes of status information included in each packet this gives 496 "real" data bytes per read. This data is passed (indirectly, via the flip buffers) to the tty line discipline which takes care of throttling when there the free buffer space reaches TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver processes up to 496 bytes at a time, throttling won't happen in time and the line discipline will discard the remaining bytes. To avoid this the patch passes data in 62-byte blocks to the tty layer and checks the available space in the ldisc-buffers. If there isn't enough free space, processing the rest of the data is delayed using a workqueue. Note: The original problem should be easily reproducible with a userspace program which does slow & small reads. === Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Daniel Smertnig <daniel.smertnig@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-06Input: wacom - fix formatting in accordance to CodingStyleDmitry Torokhov1-71/+52
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-06Input: Wacom driver updatePing Cheng1-183/+153
- add support for Cintiq 21UX - fix a Graphire bug - merge wacom_intuos3_irq into wacom_intuos_irq Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-06Input: add driver for Acecad Flair USB tabletsStephane VOLTZ5-0/+306
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-06Automatic merge of ↵Dmitry Torokhov16-319/+1604
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2005-06-03[PATCH] USB: resolve Zaurus problemDavid Brownell1-1/+1
This "obvious" one-liner is needed to recognize Zaurus SL 6000; it just checks two GUIDs not just one. OSDL bugids #4512 and #4545 seem to be duplicates of this report. From: Gerald Skerbitz <gsker@tcfreenet.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03[PATCH] USB: CP2101 Add support for flow controlCraig Shelley1-88/+275
Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03[PATCH] USB Storage: Add unusual_devs for Trumpion Voice RecorderPhil Dibowitz1-0/+9
The original entry of this patch was submitted by Filippo Bardelli <filibard@libero.it>, with cleanups and patch-ification by me. This corrects the subclass that the device reports. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03[PATCH] USB: make MODALIAS code a bit smaller devicesPaulo Marques1-12/+10
This patch makes the code to provide modalias in sysfs for usb devices 56 bytes smaller in i386, while making it clear that the first part of the modalias string is the same no matter what the device class is. Signed-Off-By: Paulo Marques <pmarques@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03[PATCH] USB: add Option Card driverMatthias Urlichs3-0/+741
This patch adds a new driver for "Option" cards. This is a GSM data card, controlled by three "serial ports" which are connected via an OHCI adapter, all located on an oversized PC-Card. It's sold by several GSM service providers. Traditionally, this card has been accessed via the standard serial driver and appropriate vendor= and product= options. However, testing has revealed several problems with this approach, including hung data transfers and lost data blocks when receiving. Therefore, I've written a separate driver. Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03[PATCH] USB: add Vernier devices to HID blacklistGreg Kroah-Hartman1-0/+10
They aren't really HID devices. Damm microsoft HID driver, that thing has caused more companies to have to do this kind of hack... Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03[PATCH] USB: hid-core: add Earthmate lt-20 productid to blacklist tableLonnie Mendez1-0/+2
This patch adds the DeLorme Earthmate lt-20 productid to the hid blacklist table. This patch ensures the lt-20 can be claimed by the appropriate driver (cypress_m8). Adds the product id 0x200, of the DeLorme Earthmate lt-20, to the hid blacklist table. Signed-off-by: Lonnie Mendez <lmendez19@austin.rr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03[PATCH] USB: add new wacom device to usb hid-core listPing Cheng1-0/+6
- add Intuos3 and Cintiq 21UX Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03[PATCH] USB: remove drivers/usb/media/pwc/ChangeLogAdrian Bunk1-143/+0
This patch removes the outdated ChangeLog file for this driver. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-01Automatic merge of ↵Dmitry Torokhov2-4/+0
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2005-05-31[PATCH] USB: fix usb-serial generic initializationGreg Kroah-Hartman1-10/+10
At module load time, if a generic device is found, the tty information for the device is not set up properly (as the tty structures aren't initialized yet.) This can cause big problems for things like udev. This patch fixes this. Thanks to Kay Sievers for the original patch for this problem. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31[PATCH] USB: ftdi_sio: new PID for ELV UM100Ian Abbott2-0/+5
ftdi_sio: Add PID for "ELV USB Module UM100". PID sent by Armin Laugher. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31[PATCH] USB: add sl811_cs supportDavid Brownell3-0/+454
This adds support for a CF-card USB Host adapter, the Ratoc REX-CFU1U, by wrapping a PCMCIA driver around the existing "sl811-hcd" platform driver. This CF card is especially useful for PDAs, which currently tend to have no other solution for USB host capability. From: Botond Botyanszki <boti@rocketmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31[PATCH] USB: sl811-hcd fixesDavid Brownell1-65/+81
Various fixes to the sl811-hcd driver: * Fix small glitches that crept in during recent evolution of usbcore's hcd glue layer, coupling endpoint state records to usbcore and active urbs. (As noted by folk whose boards weren't stuck on 2.6.9 kernels...) * Cope with various system-specific issues: - Some configurations (e.g. a CF-card uses this chip) have iospace addresses for the two registers, rather than memory mapped ones. - Some configurations do interesting things with IRQs; maybe the line is shared, or it doesn't support level triggering. - Not all boards can drive the chip reset line in software. * Address a potential race during unlinking. * Tweak probe/remove section info to handle the case where this segment of a platform bus is hotpluggable (e.g. CF card). (The basic problem is that CONFIG_HOTPLUG is global, which is wrong since not all busses can hotplug even on hotplug-friendly systems...) Also export the driver, so that the CF driver can depend on it. Also removed some annoying end-of-line whitespace. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-29Input: HID items of width 32 (bits) or greater are incorrectly extractedAdam Kropelin1-1/+1
due to a masking bug in hid-core.c:extract(). This patch fixes it up by forcing the mask to be 64 bits wide. Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29Input: remove user counters from drivers/usb/input since inputDmitry Torokhov10-106/+23
core takes care of calling open and close methods only when needed. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29Input: mtouchusb was indented with spaces instead of tabs, passDmitry Torokhov1-214/+201
through Lindent and adjust results. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-19 14:20:24 +0000