summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2012-01-24usb: gadget: check for streams only for SS udcsSebastian Andrzej Siewior1-1/+1
Currently the UASP gadget fails to bind on an UDC which does not provide stream support. This is true for all udc in tree except for dummy and dwc3 since they don't support SuperSpeed. There is no need to test for the availability of stream support on those UDCs because we will never even try to use them. I think it is sane to assume that StreamSupport is always available on SuperSpeed since it is one of the key features. The host side will only allocate on SS so this part is also fine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: fsl_udc: fix the usage of udc->max_epPeter Chen1-2/+2
The max_ep is the number of endpoint * 2. But in dtd_complete_irq, it does again * 2, it will deference wrong memory after scanning max_ep - 1. The another similar problem is at USB_REQ_SET_FEATURE (the pipe number should be 0 and max_ep - 1). Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Matthieu castet <matthieu.castet@parrot.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24drivers: usb: otg: Fix dependencies for some OTG driversFabio Estevam1-2/+2
Fix the following build warning: warning: (USB_LANGWELL_OTG && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && EXPERIMENTAL && USB_SUSPEND) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle()Jesper Juhl1-1/+1
In drivers/usb/renesas_usbhs/mod_gadget.c::usbhsg_recip_run_handle() the Coverity Prevent checker currently flags a warning about possibly uninitialized use of 'ret' i usbhsg_recip_run_handle(). It does this since it assumes we take one of the non-default branches in the switch and then subsequently take the false branch in the 'if (func)' case below. This exact scenario will never happen, but Coverity can't see that for some reason. This patch initializes 'ret' to '0' when it is declared which should shut up this report and won't really hurt - so why not? At least then it's clear that 'ret' is always initialized.. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst tooPaul Zimmerman1-4/+3
SuperSpeed Isoc endpoints also use the bMaxBurst value from the companion descriptor. See section 9.6.7 in the USB 3.0 spec. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: storage: endian fixAndiry Xu1-3/+3
Fix some endian issues for storage gadgets. Cc: stable@vger.kernel.org Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: dwc3: ep0: fix compile warningFelipe Balbi1-1/+0
commit 34c60a7 (usb: dwc3: ep0: tidy up Pending Request handling) introduced a compile warning by leaving an unused variable. This patch fixes that warning: drivers/usb/dwc3/ep0.c: In function ‘__dwc3_gadget_ep0_queue’: drivers/usb/dwc3/ep0.c:129:8: warning: unused variable ‘type’ [-Wunused-variable] Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: musb: davinci: fix build breakageSekhar Nori1-3/+0
Commit 0020afb369859472a461ef4af6410732e929d402 (ARM: mach-davinci: remove mach/memory.h) removed mach/memory.h for DaVinci which broke DaVinci MUSB build. mach/memory.h is not actually needed in davinci.c, so remove it. While at it, also remove some more machine specific inclulde files which are not needed for build. Tested on DM644x EVM using USB card reader. Cc: stable@vger.kernel.org # v3.2 Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: langwell: don't call gadget's disconnect()Alexander Shishkin1-10/+8
UDC core will call disconnect() and unbind() for us upon the gadget removal, so we should not do it ourselves. Otherwise, a composite gadget will explode, for example. Others might too. This was introduced during conversion to new style gadget in 2c7f0989 (usb: gadget: langwell: convert to new style). Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v3.2 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: langwell: drop langwell_otg supportAlexander Shishkin2-88/+2
Since there is no working (or even compilable) OTG_TRANSCEIVER support for this driver, remove the dead code which depends on it at compile time. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v2.6.31+ Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: otg: kill langwell_otg driverAlexander Shishkin3-2362/+0
The way this driver was added by f0ae849 (usb: Add Intel Langwell USB OTG Transceiver Driver) never even compiled together with langwell_udc, and that's the only way for it to be useful. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v2.6.31+ Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@linux.intel.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: dwc3: ep0: tidy up Pending Request handlingFelipe Balbi1-10/+4
The way our code was written, we should never have a DWC3_EP_PENDING_REQUEST flag set out of a Data Phase and the code in __dwc3_gadget_ep0_queue() did not reflect that situation properly. Tidy up that case to avoid any possible mistakes when starting requests for IRQs which are long gone. Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-4/+4
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-17Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds1-1/+1
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: USB: EHCI: Don't use NO_IRQ in xilinx ehci driver microblaze: Add topology init
2012-01-16USB: EHCI: Don't use NO_IRQ in xilinx ehci driverMichal Simek1-1/+1
Drivers shouldn't use NO_IRQ. This driver is used by Microblaze and PPC. PPC defines NO_IRQ as 0 and Microblaze has removed it. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Grant Likely <grant.likely@secretlab.ca> CC: linux-usb@vger.kernel.org CC: devicetree-discuss@lists.ozlabs.org
2012-01-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds4-5/+291
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits) MIPS: Delete unused function add_temporary_entry. MIPS: Set default pci cache line size. MIPS: Flush huge TLB MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM. MIPS: Octeon: Add support for OCTEON II PCIe MIPS: Octeon: Update PCI Latency timer and enable more error reporting. MIPS: Alchemy: Update cpu-feature-overrides MIPS: Alchemy: db1200: Improve PB1200 detection. MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code. MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller MIPS: Alchemy: irq: register pm at irq init time MIPS: Alchemy: Touchscreen support on DB1100 MIPS: Alchemy: Hook up IrDA on DB1000/DB1100 net/irda: convert au1k_ir to platform driver. MIPS: Alchemy: remove unused board headers MTD: nand: make au1550nd.c a platform_driver MIPS: Netlogic: Mark Netlogic chips as SMT capable MIPS: Netlogic: Add support for XLP 3XX cores MIPS: Netlogic: Merge some of XLR/XLP wakup code MIPS: Netlogic: Add default XLP config. ... Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c, traps.c} and drivers/tty/serial/Makefile
2012-01-14Merge tag 'for-linus' of git://github.com/rustyrussell/linuxLinus Torvalds64-89/+89
Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1 * tag 'for-linus' of git://github.com/rustyrussell/linux: module_param: check that bool parameters really are bool. intelfbdrv.c: bailearly is an int module_param paride/pcd: fix bool verbose module parameter. module_param: make bool parameters really bool (drivers & misc) module_param: make bool parameters really bool (arch) module_param: make bool parameters really bool (core code) kernel/async: remove redundant declaration. printk: fix unnecessary module_param_name. lirc_parallel: fix module parameter description. module_param: avoid bool abuse, add bint for special cases. module_param: check type correctness for module_param_array modpost: use linker section to generate table. modpost: use a table rather than a giant if/else statement. modules: sysfs - export: taint, coresize, initsize kernel/params: replace DEBUGP with pr_debug module: replace DEBUGP with pr_debug module: struct module_ref should contains long fields module: Fix performance regression on modules with large symbol tables module: Add comments describing how the "strmap" logic works Fix up conflicts in scripts/mod/file2alias.c due to the new linker- generated table approach to adding __mod_*_device_table entries. The ARM sa11x0 mcp bus needed to be converted to that too.
2012-01-13Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell64-89/+89
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-11Merge branches 'next/ar7', 'next/ath79', 'next/bcm63xx', 'next/bmips', ↵Ralf Baechle2-1/+5
'next/cavium', 'next/generic', 'next/kprobes', 'next/lantiq', 'next/perf' and 'next/raza' into mips-for-linux-next
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) hid-input/battery: add FEATURE quirk hid-input/battery: remove battery_val hid-input/battery: power-supply type really *is* a battery hid-input/battery: make the battery setup common for INPUTs and FEATUREs hid-input/battery: deal with both FEATURE and INPUT report batteries hid-input/battery: add quirks for battery hid-input/battery: remove apparently redundant kmalloc hid-input: add support for HID devices reporting Battery Strength HID: hid-multitouch: add support 9 new Xiroku devices HID: multitouch: add support for 3M 32" HID: multitouch: add support of Atmel multitouch panels HID: usbhid: defer LED setting to a workqueue HID: usbhid: hid-core: submit queued urbs before suspend HID: usbhid: remove LED_ON HID: emsff: use symbolic name instead of hardcoded PID constant HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II HID: Kconfig: fix syntax HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY HID: multitouch: support PixArt optical touch screen HID: make parser more verbose about parsing errors by default ... Fix up rename/delete conflict in drivers/hid/hid-hyperv.c (removed in staging, moved in this branch) and similarly for the rules for same file in drivers/staging/hv/{Kconfig,Makefile}.
2012-01-09Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds6-21/+300
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
2012-01-09Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-4/+6
New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
2012-01-09Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+71
Device tree conversions for samsung and tegra Both platforms had some initial device tree support, but this adds much more to actually make it usable. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN ARM: EXYNOS: Add Exynos4 device tree enabled board file rtc: rtc-s3c: Add device tree support input: samsung-keypad: Add device tree support ARM: S5PV210: Modify platform data for pl330 driver ARM: S5PC100: Modify platform data for pl330 driver ARM: S5P64x0: Modify platform data for pl330 driver ARM: EXYNOS: Add a alias for pdma clocks ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers DMA: PL330: Add device tree support ARM: EXYNOS: Modify platform data for pl330 driver DMA: PL330: Infer transfer direction from transfer request instead of platform data DMA: PL330: move filter function into driver serial: samsung: Fix build for non-Exynos4210 devices serial: samsung: add device tree support serial: samsung: merge probe() function from all SoC specific extensions serial: samsung: merge all SoC specific port reset functions ARM: SAMSUNG: register uart clocks to clock lookup list serial: samsung: remove all uses of get_clksrc and set_clksrc ... Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and drivers/tty/serial/Kconfig both due to just adding code close to changes.
2012-01-09Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-13/+13
Cleanups on various subarchitectures Cleanup patches for various ARM platforms and some of their associated drivers, the bulk of these is for mach-91. Arnd ended up pulling in the restart branch from Russell in order to fix up some simple but annoying merge conflicts. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) arm/at91: fix build of stamp9g20 ARM: u300: delete memory.h MAINTAINERS: add maintainer entry for Picochip picoxcell ARM: picoxcell: move io mappings to common.c ARM: picoxcell: don't reserve irq_descs ARM: picoxcell: remove mach/memory.h ARM: at91: delete the pcontrol_g20_defconfig arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC arm/tegra: remove unused defines arm/tegra: fix variable formatting in makefile ARM: davinci: vpif: move code to driver core header from platform ARM: at91/gpio: fix display of number of irq setuped ARM: at91/gpio: drop PIN_BASE ARM: at91/udc: use gpio_is_valid to check the gpio ARM: at91/ohci: use gpio_is_valid to check the gpio ARM: at91/nand: use gpio_is_valid to check the gpio ARM: at91/mmc: use gpio_is_valid to check the gpio ARM: at91/ide: use gpio_is_valid to check the gpio ARM: at91/pata: use gpio_is_valid to check the gpio ARM: at91/soc: use gpio_is_valid to check the gpio ...
2012-01-09Merge branch 'usb-next' of ↵Linus Torvalds181-3722/+4720
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits) USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c xhci: Clean up 32-bit build warnings. USB: update documentation for usbmon usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops drivers/usb/class/cdc-acm.c: clear dangling pointer drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree drivers/usb/host/isp1760-if.c: introduce missing kfree usb: option: add ZD Incorporated HSPA modem usb: ch9: fix up MaxStreams helper USB: usb-skeleton.c: cleanup open_count USB: usb-skeleton.c: fix open/disconnect race xhci: Properly handle COMP_2ND_BW_ERR USB: remove dead code from suspend/resume path USB: add quirk for another camera drivers: usb: wusbcore: Fix dependency for USB_WUSB xhci: Better debugging for critical host errors. xhci: Be less verbose during URB cancellation. xhci: Remove debugging about ring structure allocation. xhci: Remove debugging about toggling cycle bits. xhci: Remove debugging for individual transfers. ...
2012-01-09Merge branch 'samsung/driver' into next/driversArnd Bergmann6-21/+22
Conflicts: arch/arm/mach-mxs/include/mach/common.h Pull in previous samsung conflict merges and do a trivial merge of an mxs double-add conflict. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-08... and the same for gadgetfsAl Viro1-15/+11
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08functionfs: unfuck failure exits on mountAl Viro1-20/+11
* if you do dput() of root dentry, do *not* follow that with iput() of root inode. * while we are at it, don't do that dput() at all - you are leaving the pointer in ->s_root and your ->kill_sb() will be very unhappy with that. It will do proper dput(), though, so the easiest way is to leave that to it entirely. * freeing ->s_fs_info is also best left to ->kill_sb() (which will do it anyway), especially since we leave the pointer in place. * that xchg() in ->kill_sb() is not a bug per se, but it's a plain and simple masturbation with fewer excuses than Onan had... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-09mfd: Unify abx500 headers in mfd/abx500Linus Walleij1-1/+1
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds10-13/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-08Merge branch 'for-linus2' of ↵Linus Torvalds7-24/+21
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-07Merge branch 'samsung/dt' into next/dtArnd Bergmann6-21/+22
* samsung/dt: (3 commit) Merge branch 'depends/rmk/for-linus' into samsung/dt Merge branch 'depends/rmk/restart' into next/cleanup Merge branch 'next/cleanup' into samsung/dt Conflicts: arch/arm/mach-tegra/board-dt.c arch/arm/mach-tegra/include/mach/entry-macro.S The latest version of the samsung/dt branch resolves all sorts of conflicts with the latest upstream, no functional changes that are not already there. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-07Merge branch 'driver-core-next' of ↵Linus Torvalds41-688/+43
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-07Merge branch 'depends/rmk/restart' into next/cleanupArnd Bergmann9-10/+28
Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9260.c arch/arm/mach-at91/at91sam9261.c arch/arm/mach-at91/at91sam9263.c arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-at91/at91sam9rl.c arch/arm/mach-exynos/cpu.c arch/arm/mach-shmobile/board-kota2.c This resolves a bunch of conflicts between the arm-soc tree and changes from the arm tree that have gone upstream. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-06vfs: switch ->show_options() to struct dentry *Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman41-688/+43
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-05USB: Add USB-ID for Multiplex RC serial adapter to cp210x.cMalte Schröder1-0/+1
Hi, below patch adds the USB-ID of the serial adapters sold by Multiplex RC (www.multiplex-rc.de). Signed-off-by: Malte Schröder <maltesch@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-05Merge branches 'hyperv', 'multitouch', 'roccat', 'upstream', ↵Jiri Kosina99-546/+839
'upstream-fixes', 'wacom' and 'wiimote' into for-linus
2012-01-04Merge branch 'for-usb-next' of ↵Greg Kroah-Hartman3-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next * 'for-usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: xhci: Clean up 32-bit build warnings. xhci: Properly handle COMP_2ND_BW_ERR
2012-01-04xhci: Clean up 32-bit build warnings.Sarah Sharp1-2/+4
Randy Dunlap points out that commit 9258c0b2 "xhci: Better debugging for critical host errors." introduces some new build warnings on 32-bit builds: drivers/usb/host/xhci-ring.c:1936:3: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t' drivers/usb/host/xhci-ring.c:1958:3: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t' Cast the results of xhci_trb_virt_to_dma() from a dma_addr_t to an unsigned long long. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net>
2012-01-04usb: usb-storage doesn't support dynamic id currently, the patch disables ↵Huajun Li1-0/+1
the feature to fix an oops Echo vendor and product number of a non usb-storage device to usb-storage driver's new_id, then plug in the device to host and you will find following oops msg, the root cause is usb_stor_probe1() refers invalid id entry if giving a dynamic id, so just disable the feature. [ 3105.018012] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 3105.018062] CPU 0 [ 3105.018075] Modules linked in: usb_storage usb_libusual bluetooth dm_crypt binfmt_misc snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep hp_wmi ppdev sparse_keymap snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse snd serio_raw tpm_infineon soundcore i915 snd_page_alloc tpm_tis parport_pc tpm tpm_bios drm_kms_helper drm i2c_algo_bit video lp parport usbhid hid sg sr_mod sd_mod ehci_hcd uhci_hcd usbcore e1000e usb_common floppy [ 3105.018408] [ 3105.018419] Pid: 189, comm: khubd Tainted: G I 3.2.0-rc7+ #29 Hewlett-Packard HP Compaq dc7800p Convertible Minitower/0AACh [ 3105.018481] RIP: 0010:[<ffffffffa045830d>] [<ffffffffa045830d>] usb_stor_probe1+0x2fd/0xc20 [usb_storage] [ 3105.018536] RSP: 0018:ffff880056a3d830 EFLAGS: 00010286 [ 3105.018562] RAX: ffff880065f4e648 RBX: ffff88006bb28000 RCX: 0000000000000000 [ 3105.018597] RDX: ffff88006f23c7b0 RSI: 0000000000000001 RDI: 0000000000000206 [ 3105.018632] RBP: ffff880056a3d900 R08: 0000000000000000 R09: ffff880067365000 [ 3105.018665] R10: 00000000000002ac R11: 0000000000000010 R12: ffff6000b41a7340 [ 3105.018698] R13: ffff880065f4ef60 R14: ffff88006bb28b88 R15: ffff88006f23d270 [ 3105.018733] FS: 0000000000000000(0000) GS:ffff88007a200000(0000) knlGS:0000000000000000 [ 3105.018773] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 3105.018801] CR2: 00007fc99c8c4650 CR3: 0000000001e05000 CR4: 00000000000006f0 [ 3105.018835] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3105.018870] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 3105.018906] Process khubd (pid: 189, threadinfo ffff880056a3c000, task ffff88005677a400) [ 3105.018945] Stack: [ 3105.018959] 0000000000000000 0000000000000000 ffff880056a3d8d0 0000000000000002 [ 3105.019011] 0000000000000000 ffff880056a3d918 ffff880000000000 0000000000000002 [ 3105.019058] ffff880056a3d8d0 0000000000000012 ffff880056a3d8d0 0000000000000006 [ 3105.019105] Call Trace: [ 3105.019128] [<ffffffffa0458cd4>] storage_probe+0xa4/0xe0 [usb_storage] [ 3105.019173] [<ffffffffa0097822>] usb_probe_interface+0x172/0x330 [usbcore] [ 3105.019211] [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0 [ 3105.019243] [<ffffffff815fdd43>] __device_attach+0x73/0x90 [ 3105.019272] [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110 [ 3105.019303] [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0 [ 3105.019334] [<ffffffff815fd6c7>] device_attach+0xf7/0x120 [ 3105.019364] [<ffffffff815fc905>] bus_probe_device+0x45/0x80 [ 3105.019396] [<ffffffff815f98a6>] device_add+0x876/0x990 [ 3105.019434] [<ffffffffa0094e42>] usb_set_configuration+0x822/0x9e0 [usbcore] [ 3105.019479] [<ffffffffa00a3492>] generic_probe+0x62/0xf0 [usbcore] [ 3105.019518] [<ffffffffa0097a46>] usb_probe_device+0x66/0xb0 [usbcore] [ 3105.019555] [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0 [ 3105.019589] [<ffffffff815fdd43>] __device_attach+0x73/0x90 [ 3105.019617] [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110 [ 3105.019648] [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0 [ 3105.019680] [<ffffffff815fd6c7>] device_attach+0xf7/0x120 [ 3105.019709] [<ffffffff815fc905>] bus_probe_device+0x45/0x80 [ 3105.021040] usb usb6: usb auto-resume [ 3105.021045] usb usb6: wakeup_rh [ 3105.024849] [<ffffffff815f98a6>] device_add+0x876/0x990 [ 3105.025086] [<ffffffffa0088987>] usb_new_device+0x1e7/0x2b0 [usbcore] [ 3105.025086] [<ffffffffa008a4d7>] hub_thread+0xb27/0x1ec0 [usbcore] [ 3105.025086] [<ffffffff810d5200>] ? wake_up_bit+0x50/0x50 [ 3105.025086] [<ffffffffa00899b0>] ? usb_remote_wakeup+0xa0/0xa0 [usbcore] [ 3105.025086] [<ffffffff810d49b8>] kthread+0xd8/0xf0 [ 3105.025086] [<ffffffff81939884>] kernel_thread_helper+0x4/0x10 [ 3105.025086] [<ffffffff8192a8c0>] ? _raw_spin_unlock_irq+0x50/0x80 [ 3105.025086] [<ffffffff8192b1b4>] ? retint_restore_args+0x13/0x13 [ 3105.025086] [<ffffffff810d48e0>] ? __init_kthread_worker+0x80/0x80 [ 3105.025086] [<ffffffff81939880>] ? gs_change+0x13/0x13 [ 3105.025086] Code: 00 48 83 05 cd ad 00 00 01 48 83 05 cd ad 00 00 01 4c 8b ab 30 0c 00 00 48 8b 50 08 48 83 c0 30 48 89 45 a0 4c 89 a3 40 0c 00 00 <41> 0f b6 44 24 10 48 89 55 a8 3c ff 0f 84 b8 04 00 00 48 83 05 [ 3105.025086] RIP [<ffffffffa045830d>] usb_stor_probe1+0x2fd/0xc20 [usb_storage] [ 3105.025086] RSP <ffff880056a3d830> [ 3105.060037] hub 6-0:1.0: hub_resume [ 3105.062616] usb usb5: usb auto-resume [ 3105.064317] ehci_hcd 0000:00:1d.7: resume root hub [ 3105.094809] ---[ end trace a7919e7f17c0a727 ]--- [ 3105.130069] hub 5-0:1.0: hub_resume [ 3105.132131] usb usb4: usb auto-resume [ 3105.132136] usb usb4: wakeup_rh [ 3105.180059] hub 4-0:1.0: hub_resume [ 3106.290052] usb usb6: suspend_rh (auto-stop) [ 3106.290077] usb usb4: suspend_rh (auto-stop) Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04drivers/usb/class/cdc-acm.c: clear dangling pointerJulia Lawall1-0/+4
On some failures, the country_code field of an acm structure is freed without freeing the acm structure itself. Elsewhere, operations including memcpy and kfree are performed on the country_code field. The patch sets the country_code field to NULL when it is freed, and likewise sets the country_code_size field to 0. Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04drivers/usb/dwc3/dwc3-pci.c: introduce missing kfreeJulia Lawall1-1/+1
Glue needs to be freed on exiting the function in an error case. Furthermore, pci, which is the first argument to the probe function should not be freed before leaveing the function, as it is reused at the call site. So the free of pci is changed to free glue instead. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04drivers/usb/host/isp1760-if.c: introduce missing kfreeJulia Lawall1-4/+9
drvdata needds to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04usb: option: add ZD Incorporated HSPA modemJanne Snabb1-0/+5
Add support for Chinese Noname HSPA USB modem which is apparently manufactured by a company called ZD Incorporated (based on texts in the Windows drivers). This product is available at least from Dealextreme (SKU 80032) and possibly in India with name Olive V-MW250. It is based on Qualcomm MSM6280 chip. I needed to also add "options usb-storage quirks=0685:7000:i" in modprobe configuration because udevd or the kernel keeps poking the embedded fake-cd-rom which fails and causes the device to reset. There might be a better way to accomplish the same. usb_modeswitch is not needed with this device. Signed-off-by: Janne Snabb <snabb@epipe.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04usb: ch9: fix up MaxStreams helperFelipe Balbi2-4/+2
According to USB 3.0 Specification Table 9-22, if bmAttributes [4:0] are set to zero, it means "no streams supported", but the way this helper was defined on Linux, we will *always* have one stream which might cause several problems. For example on DWC3, we would tell the controller endpoint has streams enabled and yet start transfers with Stream ID set to 0, which would goof up the host side. While doing that, convert the macro to an inline function due to the different checks we now need. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04USB: usb-skeleton.c: cleanup open_countMing Lei1-18/+4
It is not necessary to use the 'open_count' for handling runtime pm only, because runtinme pm has built-in counter to handle this, so remove it to make code clean. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04USB: usb-skeleton.c: fix open/disconnect raceMing Lei1-1/+17
If usb device is disconnected between usb_get_intfdata() and kref_get() in skel_open(), kref_get may access a freed object. Also check if device is disconnected in ->open. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 06:41:42 +0000