summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-18/+0
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-15Merge tag 'usb-5.10-rc1' of ↵Linus Torvalds139-1386/+5265
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY/Thunderbolt driver updates from Greg KH: "Here is the big set of USB, PHY, and Thunderbolt driver updates for 5.10-rc1. Lots of tiny different things for these subsystems are in here, including: - phy driver updates - thunderbolt / USB 4 updates and additions - USB gadget driver updates - xhci fixes and updates - typec driver additions and updates - api conversions to various drivers for core kernel api changes - new USB control message functions to make it harder to get wrong, as found by syzbot (took 2 tries to get it right) - lots of tiny USB driver fixes and updates all over the place All of these have been in linux-next for a while, with the exception of the last "obviously correct" patch that updated a FALLTHROUGH comment that got merged last weekend" * tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits) usb: musb: gadget: Use fallthrough pseudo-keyword usb: typec: Add QCOM PMIC typec detection driver USB: serial: option: add Cellient MPL200 card usb: typec: tcpci_maxim: Add support for Sink FRS usb: typec: tcpci: Implement callbacks for FRS usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) usb: typec: tcpci_maxim: Chip level TCPC driver usb: typec: tcpci: Add set_vbus tcpci callback usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled usb: cdc-acm: add quirk to blacklist ETAS ES58X devices USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: core: remove polling for /sys/kernel/debug/usb/devices usb: typec: add support for STUSB160x Type-C controller family usb: typec: add typec_find_pwr_opmode usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema usb: dwc2: Fix INTR OUT transfers in DDMA mode. ...
2020-10-14Merge tag 'driver-core-5.10-rc1' of ↵Linus Torvalds2-17/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.10-rc1 They include a lot of different things, all related to the driver core and/or some driver logic: - sysfs common write functions to make it easier to audit sysfs attributes - device connection cleanups and fixes - devm helpers for a few functions - NOIO allocations for when devices are being removed - minor cleanups and fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits) regmap: debugfs: use semicolons rather than commas to separate statements platform/x86: intel_pmc_core: do not create a static struct device drivers core: node: Use a more typical macro definition style for ACCESS_ATTR drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit drivers core: Miscellaneous changes for sysfs_emit drivers core: Reindent a couple uses around sysfs_emit drivers core: Remove strcat uses around sysfs_emit and neaten drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output dyndbg: use keyword, arg varnames for query term pairs driver core: force NOIO allocations during unplug platform_device: switch to simpler IDA interface driver core: platform: Document return type of more functions Revert "driver core: Annotate dev_err_probe() with __must_check" Revert "test_firmware: Test platform fw loading on non-EFI systems" iio: adc: xilinx-xadc: use devm_krealloc() hwmon: pmbus: use more devres helpers devres: provide devm_krealloc() syscore: Use pm_pr_dbg() for syscore_{suspend,resume}() ...
2020-10-10usb: musb: gadget: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
In order to enable -Wimplicit-fallthrough for Clang[1], replace the existing /* FALLTHROUGH */ comment with the new pseudo-keyword macro fallthrough[2]. [1] https://git.kernel.org/linus/e2079e93f562c7f7a030eb7642017ee5eabaaa10 [2] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20201008222849.GA18634@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-09usb: typec: Add QCOM PMIC typec detection driverWesley Cheng3-0/+275
The QCOM SPMI typec driver handles the role and orientation detection, and notifies client drivers using the USB role switch framework. It registers as a typec port, so orientation can be communicated using the typec switch APIs. The driver also attains a handle to the VBUS output regulator, so it can enable/disable the VBUS source when acting as a host/device. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201008235934.8931-2-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08Merge tag 'usb-serial-5.10-rc1' of ↵Greg Kroah-Hartman6-19/+36
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.10-rc1 Here are the USB-serial updates for 5.10-rc1, including: - new device ids - various clean ups All have been in linux-next with no reported issues. * tag 'usb-serial-5.10-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Cellient MPL200 card USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: serial: qcserial: fix altsetting probing USB: serial: ftdi_sio: clean up jtag quirks USB: serial: pl2303: add device-id for HP GC device USB: serial: ftdi_sio: add support for FreeCalypso JTAG+UART adapters
2020-10-08USB: serial: option: add Cellient MPL200 cardWilken Gottwalt1-0/+3
Add usb ids of the Cellient MPL200 card. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/3db5418fe9e516f4b290736c5a199c9796025e3c.1601715478.git.wilken.gottwalt@mailbox.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-08usb: typec: tcpci_maxim: Add support for Sink FRSBadhri Jagan Sridharan1-4/+46
Upon receiving ALERT_EXTENDED.TCPC_SINK_FAST_ROLE_SWAP signal tcpm to start Sink fast role swap signal. Inform when TCPM is sourcing vbus. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-9-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci: Implement callbacks for FRSBadhri Jagan Sridharan2-0/+25
Implement tcpc.enable_frs to enable TCPC to receive Fast role swap signal. Additionally set the sink disconnect threshold to 4v to prevent disconnect during Fast Role swap. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-8-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)Badhri Jagan Sridharan1-3/+226
PD 3.0 spec defines a new mechanism for power role swap called Fast role swap. This change enables TCPM to support FRS when acting as sink. Once the explicit contract is negotiated, sink port is expected to query the source port for sink caps to determine whether the source is FRS capable. Bits 23 & 24 of fixed pdo of the sink caps from the source, when set, indicates the current needed by the source when fast role swap is in progress(Implicit contract phasae). 0 indicates that the source does not support Fast Role Swap. Upon receiving the FRS signal from the source, TCPC(TCPM_FRS_EVENT) informs TCPM to start the Fast role swap sequence. 1. TCPM sends FRS PD message: FR_SWAP_SEND 2. If response is not received within the expiry of SenderResponseTimer, Error recovery is triggered.: FR_SWAP_SEND_TIMEOUT 3. Upon receipt of the accept message, TCPM waits for PSSourceOffTimer for PS_READY message from the partner: FR_SWAP_SNK_SRC_NEW_SINK_READY. TCPC is expected to autonomously turn on vbus once the FRS signal is received and vbus voltage falls below vsafe5v within tSrcFrSwap. This is different from traditional power role swap where the vbus sourcing is turned on by TCPM. 4. By this time, TCPC most likely would have started to source vbus, TCPM waits for tSrcFrSwap to see if the lower level TCPC driver signals TCPM_SOURCING_VBUS event: FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED. 5. When TCPC signals sourcing vbus, TCPM sends PS_READY msg and changes the CC pin from Rd to Rp. This is the end of fast role swap sequence and TCPM initiates the sequnce to negotiate explicit contract by transitioning into SRC_STARTUP after SwapSrcStart. The code is written based on the sequence described in "Figure 8-107: Dual-role Port in Sink to Source Fast Role Swap State Diagram" of USB Power Delivery Specification Revision 3.0, Version 1.2. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-7-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci_maxim: Chip level TCPC driverBadhri Jagan Sridharan4-7/+476
Chip level TCPC driver for Maxim's TCPCI implementation. This TCPC implementation does not support the following commands: COMMAND.SinkVbus, COMMAND.SourceVbusDefaultVoltage, COMMAND.SourceVbusHighVoltage. Instead the sinking and sourcing from vbus is supported by writes to custom registers. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-5-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci: Add set_vbus tcpci callbackBadhri Jagan Sridharan2-0/+8
set_vbus callback allows TCPC which are TCPCI based, however, does not support turning on sink and source mode through Command.SinkVbus and Command.SourceVbusDefaultVoltage. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-3-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci: Add a getter method to retrieve tcpm_port referenceBadhri Jagan Sridharan2-0/+8
Allow chip level drivers to retrieve reference to tcpm_port. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabledShuah Khan1-1/+7
kcov testing uncovered call to usb_hcd_giveback_urb() without disabling interrupts. Link: https://lore.kernel.org/linux-usb/CAAeHK+wb4k-LGTjK9F5YbJNviF_+yU+wE_=Vpo9Rn7KFN8vG6Q@mail.gmail.com/ usb_hcd_giveback_urb() is called from vhci's urb_enqueue, when it determines it doesn't need to xmit the urb and can give it back. This path runs in task context. Disable irqs around usb_hcd_giveback_urb() call. Reported-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20201006223914.39257-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05usb: cdc-acm: add quirk to blacklist ETAS ES58X devicesVincent Mailhol1-0/+11
The ES58X devices has a CDC ACM interface (used for debug purpose). During probing, the device is thus recognized as USB Modem (CDC ACM), preventing the etas-es58x module to load: usbcore: registered new interface driver etas_es58x usb 1-1.1: new full-speed USB device number 14 using xhci_hcd usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: Product: ES581.4 usb 1-1.1: Manufacturer: ETAS GmbH usb 1-1.1: SerialNumber: 2204355 cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device Thus, these have been added to the ignore list in drivers/usb/class/cdc-acm.c N.B. Future firmware release of the ES58X will remove the CDC-ACM interface. `lsusb -v` of the three devices variant (ES581.4, ES582.1 and ES584.1): Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0159 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES581.4 iSerial 3 2204355 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0035 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Bus Powered Configuration bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 iInterface 4 ACM Control Interface CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x01 call management bDataInterface 0 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 10 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0168 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES582 iSerial 3 0108933 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0169 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES584.1 iSerial 3 0100320 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201002154219.4887-8-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05USB: serial: ftdi_sio: use cur_altsetting for consistencyMychaela N. Falconia1-7/+7
ftdi_determine_type() function had this construct in it to get the number of the interface it is operating on: inter = serial->interface->altsetting->desc.bInterfaceNumber; Elsewhere in this driver cur_altsetting is used instead for this purpose. Change ftdi_determine_type() to use cur_altsetting for consistency. Signed-off-by: Mychaela N. Falconia <falcon@freecalypso.org> [ johan: fix old style issues; drop braces and random white space ] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-05USB: serial: option: Add Telit FT980-KS compositionLeonid Bloch1-0/+2
This commit adds the following Telit FT980-KS composition: 0x1054: rndis, diag, adb, nmea, modem, modem, aux AT commands can be sent to /dev/ttyUSB2. Signed-off-by: Leonid Bloch <lb.workbox@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ce86bc05-f4e2-b199-0cdc-792715e3f275@asocscloud.com Link: https://lore.kernel.org/r/20201004155813.2342-1-lb.workbox@gmail.com Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-05Merge 5.9-rc8 into usb-nextGreg Kroah-Hartman2-22/+34
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-03Merge tag 'usb-for-v5.10' of ↵Greg Kroah-Hartman52-711/+1791
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.10 merge window Most of changes are on dwc3 (38.8%) with cdns3 falling close behind (24.1%). The biggest changes here are a series of non-critical fixes to corner cases on dwc3, produced by Thinh N, and a series of major improvements to cdns3 produced by Peter C. We also have the traditional set of new device support (Intel Keem Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch fixes on dwc3 by yours truly and a set of minor changes all over the stack. * tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (117 commits) usb: dwc2: Fix INTR OUT transfers in DDMA mode. usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs usb: dwc2: override PHY input signals with usb role switch support dt-bindings: usb: dwc2: add optional usb-role-switch property usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform dt-bindings: usb: Add Intel Keem Bay USB controller bindings usb: dwc3: gadget: Support up to max stream id usb: dwc3: gadget: Return early if no TRB update usb: dwc3: gadget: Keep TRBs in request order usb: dwc3: gadget: Revise setting IOC when no TRB left usb: dwc3: gadget: Look ahead when setting IOC usb: dwc3: gadget: Allow restarting a transfer usb: bdc: remove duplicated error message usb: dwc3: Stop active transfers before halting the controller usb: cdns3: gadget: enlarge the TRB ring length usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above usb: cdns3: gadget: need to handle sg case for workaround 2 case usb: cdns3: gadget: handle sg list use case at completion correctly usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer ...
2020-10-02USB: core: remove polling for /sys/kernel/debug/usb/devicesSergey Korolev2-42/+0
The latest reference to usbfs_conn_disc_event() removed in commit fb28d58b72aa ("USB: remove CONFIG_USB_DEVICEFS") in 2012 and now a user poll() waits infinitely for content changes. Signed-off-by: Sergey Korolev <s.korolev@ndmsystems.com> Link: https://lore.kernel.org/r/20200809161233.13135-1-s.korolev@ndmsystems.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: typec: add support for STUSB160x Type-C controller familyAmelie Delaunay3-0/+888
STMicroelectronics USB Type-C port controllers use I2C interface to configure, control and read the operation status of the device. All ST USB Type-C port controllers are based on the same I2C register map. That's why this driver can be used with all ST USB Type-C ICs. Some ST USB Type-C port controllers are Dual Role Port (DRP), only Sink or Source, some supports USB Power Delivery. This can be configured through connector device tree bindings. This driver is a basic Type-C port controller driver, with no power delivery support. It allows to configure ST USB Type-C port controller. Interrupt is supported and enables CC connection events, to detect attach and detach and update Type-C subsystem accordingly as well as usb role switch. ST USB Type-C port controller can be supplied in three different ways depending on the target application: - through VDD pin only (so VDD is the main supply) - through VSYS pin only (so VSYS is the main supply) - through VDD and VSYS pins. When both VDD and VSYS power supplies are present, the low power supply VSYS is selected as main supply when VSYS voltage is above 3.1V, else VDD is selected as main supply. In case of Source or Dual port type, if VDD supply is present, it has to be enabled in case of Source power role to provide Vbus. When interrupt support is available, VDD supply is dynamically managed upon attach/detach interrupt. When there is no interrupt support, VDD supply is enabled by default. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20200924090049.9041-5-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: typec: add typec_find_pwr_opmodeAmelie Delaunay1-0/+15
This patch adds a function that converts power operation mode string into power operation mode value. It is useful to configure power operation mode through device tree property, as power capabilities may be linked to hardware design. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20200924090049.9041-3-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: typec: hd3ss3220: Use OF graph API to get the connector fwnodeBiju Das1-4/+14
Some platforms have only super speed data bus connected to this device and high speed data bus directly connected to the SoC. In such platforms modelling connector as a child of this device is making it non compliant with usb connector bindings. By modelling connector node as standalone device node along with this device and the SoC data bus will make it compliant with usb connector bindings. Update the driver to handle this model by using OF graph API to get the connector fwnode and usb role switch class API to get role switch handle. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200920134905.4370-5-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: dwc2: Fix INTR OUT transfers in DDMA mode.Minas Harutyunyan1-7/+33
In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet corresponds to single descriptor. Descriptor limit set to mps and desc chain limit set to mps * MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate transfer size should be considered correction value for each descriptor. In start request function, if "continue" is true then dma buffer address should be incremmented by offset for all type of transfers, not only for Control DATA_OUT transfers. Fixes: cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA") Fixes: e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming") Fixes: aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCsAmelie Delaunay1-1/+1
If usb-role-switch is present in the device tree, it means that ID and Vbus signals are not connected to the OTG controller but to an external component (GPIOs, Type-C controller). In this configuration, usb role switch is used to force valid sessions on STM32MP15 SoCs. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: override PHY input signals with usb role switch supportAmelie Delaunay6-4/+210
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0. avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platformWan Ahmad Zainie1-0/+1
Add compatible string to use this generic glue layer to support Intel Keem Bay platform's dwc3 controller. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: gadget: Support up to max stream idThinh Nguyen1-2/+2
DWC3 IPs can use the maximum stream id (up to 2^16) specified by the USB 3.x specs. Don't limit to stream id 2^15 only. Note that this does not reflect the number of concurrent streams the controller handles internally. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().Oliver Neukum1-17/+55
syzbot is reporting hung task at wdm_flush() [1], for there is a circular dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget cannot be called unless close() for /dev/cdc-wdm0 completes. Tetsuo Handa considered that such circular dependency is an usage error [2] which corresponds to an unresponding broken hardware [3]. But Alan Stern responded that we should be prepared for such hardware [4]. Therefore, this patch changes wdm_flush() to use wait_event_interruptible_timeout() which gives up after 30 seconds, for hardware that remains silent must be ignored. The 30 seconds are coming out of thin air. Changing wait_event() to wait_event_interruptible_timeout() makes error reporting from close() syscall less reliable. To compensate it, this patch also implements wdm_fsync() which does not use timeout. Those who want to be very sure that data has gone out to the device are now advised to call fsync(), with a caveat that fsync() can return -EINVAL when running on older kernels which do not implement wdm_fsync(). This patch also fixes three more problems (listed below) found during exhaustive discussion and testing. Since multiple threads can concurrently call wdm_write()/wdm_flush(), we need to use wake_up_all() whenever clearing WDM_IN_USE in order to make sure that all waiters are woken up. Also, error reporting needs to use fetch-and-clear approach in order not to report same error for multiple times. Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well check WDM_DISCONNECTING. In wdm_flush(), since locks are not held, it is not safe to dereference desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus, remove dev_err() from wdm_flush(). [1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186 [2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp [3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp [4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu [5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp Reported-by: syzbot <syzbot+854768b99f19e89d7f81@syzkaller.appspotmail.com> Cc: stable <stable@vger.kernel.org> Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: typec: displayport: Reduce noise from the driverHeikki Krogerus1-1/+1
It's not an error if the mode can't be entered because another mode is already active, so no longer printing an error message if that happens. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200928133324.48841-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02USB: hub: Add Kconfig option to reduce number of port initialization retriesAlan Stern2-1/+26
Description based on one by Yasushi Asano: According to 6.7.22 A-UUT “Device No Response” for connection timeout of USB OTG and EH automated compliance plan v1.2, enumeration failure has to be detected within 30 seconds. However, the old and new enumeration schemes each make a total of 12 attempts, and each attempt can take 5 seconds to time out, so the PET test fails. This patch adds a new Kconfig option (CONFIG_USB_FEW_INIT_RETRIES); when the option is set all the initialization retry loops except the outermost are reduced to a single iteration. This reduces the total number of attempts to four, allowing Linux hosts to pass the PET test. The new option is disabled by default to preserve the existing behavior. The reduced number of retries may fail to initialize a few devices that currently do work, but for the most part there should be no change. And in cases where the initialization does fail, it will fail much more quickly. Reported-and-tested-by: yasushi asano <yazzep@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200928152217.GB134701@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02USB: hub: Clean up use of port initialization schemes and retriesAlan Stern1-23/+26
The SET_CONFIG_TRIES macro in hub.c is badly named; it controls the number of port-initialization retry attempts rather than the number of Set-Configuration attempts. Furthermore, the USE_NEW_SCHEME macro and use_new_scheme() function are written in a very confusing manner, making it almost impossible to figure out exactly what they do or check that they are correct. This patch renames SET_CONFIG_TRIES to PORT_INIT_TRIES, removes USE_NEW_SCHEME entirely, and rewrites use_new_scheme() to be much more transparent, with added comments explaining how it works. The patch also pulls the single call site of use_new_scheme() out from the Get-Descriptor retry loop (where it returns the same value each time) and renames the local variable used to store the result. The overall effect is a minor cleanup. However, there is one functional change: If the "use_both_schemes" module parameter isn't set (by default it is set), the existing code does only two retry iterations. After this patch it will always perform four, regardless of the parameter's value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200928152050.GA134701@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: dwc3: gadget: Return early if no TRB updateThinh Nguyen1-0/+7
If the transfer had already started and there's no TRB to update, then there's no need to go through __dwc3_gadget_kick_transfer(). There is no problem reissuing UPDATE_TRANSFER command. This change just saves the driver from doing a few operations. This happens when we run out of TRB and function driver still queues for more requests. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: gadget: Keep TRBs in request orderThinh Nguyen1-3/+6
If we couldn't finish preparing all the TRBs of a request, don't prepare the next request. Otherwise, the TRBs order will be mixed up and the controller will process the wrong TRB. This is a corner case where there's not enough TRBs for a request that needs the extra TRB but there's still 1 available TRB in the pool. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: gadget: Revise setting IOC when no TRB leftThinh Nguyen1-8/+9
To keep the setting of interrupt-on-completion (IOC) when out of TRBs consistent and easier to read, the caller of dwc3_prepare_one_trb() will determine if the TRB must have IOC bit set. This also reduces the number of times we need to call dwc3_calc_trbs_left(). Note that we only care about setting IOC from insufficient number of TRBs for SG and not linear requests (because we don't need to split linear requests). Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: gadget: Look ahead when setting IOCThinh Nguyen1-33/+39
Previously if we run out of TRBs for the last SG entry that requires an extra TRB, we set interrupt-on-completion (IOC) bit to an already prepared TRB (i.e. HWO=1). This logic is not clean, and it's not a typical way to prepare TRB. Also, this prevents showing IOC setup in tracepoint when __dwc3_prepare_one_trb() is executed. Instead, let's look ahead when preparing TRB to know whether to set the IOC bit before the last SG entry. This requires adding a new parameter "must_interrupt" to dwc3_prepare_one_trb(). Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: gadget: Allow restarting a transferThinh Nguyen1-1/+6
It's possible that there's no new TRBs prepared when kicking a transfer. This happens when we need to stop and restart a transfer such as in the case of reinitiating a stream or retrying isoc transfer. For streams, sometime host may reject a stream and the device may need to reinitiate that stream by stopping and restarting a transfer. In this case, all the TRBs may have already been prepared. Allow the function __dwc3_gadget_kick_transfer() to go through even though there's no new TRB. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: bdc: remove duplicated error messageTang Bin1-4/+3
in case devm_platform_ioremap_resource() fails, that function already prints a relevant error message which renders the driver's dev_err() redundant. Let's remove the unnecessary message and, while at that, also make sure to pass along the error value returned by devm_platform_ioremap_resource() instead of always returning -ENOMEM. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> [balbi@kernel.org : improved commit log] Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: Stop active transfers before halting the controllerWesley Cheng2-2/+66
In the DWC3 databook, for a device initiated disconnect or bus reset, the driver is required to send dependxfer commands for any pending transfers. In addition, before the controller can move to the halted state, the SW needs to acknowledge any pending events. If the controller is not halted properly, there is a chance the controller will continue accessing stale or freed TRBs and buffers. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Reviewed-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: enlarge the TRB ring lengthPeter Chen1-1/+1
At Android ADB and MTP use case, it uses f_fs which supports scatter list, it means one request may need several TRBs for it. Besides, TRB consumes very fast compared to TRB has prepared for above use case, there are at most 120 pending requests, the date size is 16KB for each request, so four TRBs (4KB per TRB) per sg entry at worst case. so we need to enlarge the TRB ring length to avoid "no free TRB error". Since each TRB only consumes 12 bytes (3 * 32 bits), we enlarge the TRB length to 600, it leaves some buffers for potential "no free TRB error", and only increases a little memory cost. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or abovePeter Chen1-1/+2
The scatter buffer list support earlier than DEV_VER_V2 is not good enough, software can't know well about short transfer for it. Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: need to handle sg case for workaround 2 casePeter Chen1-13/+31
Add sg case for workaround 2, the workaround 2 is described at the beginning of this file. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: handle sg list use case at completion correctlyPeter Chen2-29/+65
- Judge each TRB has been handled at cdns3_trb_handled, since the DMA pointer may be at the middle of the TD, we can't consider this TD has finished at that time. - Calculate req->actual according to finished TRBs. - Handle short transfer for sg list use case correctly. When the short transfer occurs, we check OUT_SMM at TRB to see if it is the last TRB. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: add CHAIN and ISP bit for sg list use casePeter Chen1-1/+7
For sg buffer list use case, we need to add ISP for each TRB, and add CHAIN bit for each TRB except for the last TRB. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transferPeter Chen1-2/+17
It only dumps the first TRB per request, it is not useful if only dump the first TRB when there are several TRBs per request. We improve it by dumpping all TRBs per request in this commit. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: cdns3: gadget: using correct sg operationsPeter Chen1-7/+15
It needs to use request->num_mapped_sgs to indicate mapped sg number, the request->num_sgs is the sg number before the mapping. These two entries have different values for the platforms which iommu or swiotlb is used. Besides, it needs to use correct sg APIs for mapped sg list for TRB assignment. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: Add splitdisable quirk for Hisilicon Kirin SocYu Chen2-0/+32
SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core of Hisilicon Kirin Soc when dwc3 core act as host. [mchehab: dropped a dev_dbg() as only traces are now allowwed on this driver] Signed-off-by: Yu Chen <chenyu56@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: bdc: Fix unused assignment in bdc_probe()Tang Bin1-1/+1
Delete unused initialized value of 'ret', because it will be assigned by the function clk_prepare_enable(). Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: gadget: uvc: Fix the wrong v4l2_device_unregister callZqiang1-4/+4
If an error occurred before calling the 'v4l2_device_register' func, and then goto error, but no need to call 'v4l2_device_unregister' func. Signed-off-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: gadget: Rename misleading function namesThinh Nguyen1-5/+5
The functions dwc3_prepare_one_trb_sg and dwc3_prepare_one_trb_linear are not necessarily preparing "one" TRB, it can prepare multiple TRBs. Rename these functions as follow: dwc3_prepare_one_trb_sg -> dwc3_prepare_trbs_sg dwc3_prepare_one_trb_linear -> dwc3_prepare_trbs_linear Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-11 18:40:44 +0000