summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2012-01-30Merge tag 'usb-3.3-rc1' of ↵Linus Torvalds36-2593/+224
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Here are a bunch of USB patches for 3.3-rc1. Nothing major, largest thing here is the removal of some drivers that did not work at all. Other than that, the normal collection of bugfixes and new device ids. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> * tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (52 commits) uwb & wusb: fix kconfig error USB: Realtek cr: fix autopm scheduling while atomic USB: ftdi_sio: Add more identifiers xHCI: Cleanup isoc transfer ring when TD length mismatch found usb: musb: omap2430: minor cleanups. qcaux: add more Pantech UML190 and UML290 ports Revert "drivers: usb: Fix dependency for USB_HWA_HCD" usb: mv-otg - Fix build if CONFIG_USB is not set USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE usb: add support for STA2X11 host driver drivers: usb: Fix dependency for USB_HWA_HCD kernel-doc: fix new warning in usb.h USB: OHCI: fix new compiler warnings usb: serial: kobil_sct: fix compile warning: drivers/usb/host/ehci-fsl.c: add missing iounmap USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal USB: cdc-wdm: use two mutexes to allow simultaneous read and write USB: cdc-wdm: updating desc->length must be protected by spin_lock USB: usbsevseg: fix max length ...
2012-01-26uwb & wusb: fix kconfig errorRandy Dunlap1-1/+1
Fix UWB/WUSB kconfig error by changing 'select' to 'depends on'. drivers/usb/wusbcore/Kconfig:4:error: recursive dependency detected! drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26USB: Realtek cr: fix autopm scheduling while atomicStanislaw Gruszka1-1/+1
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=784345 Reported-by: Francis Moreau <francis.moro@gmail.com> Reported-and-tested-by: Christian D <chrisudeussen@gmail.com> Reported-and-tested-by: Jimmy Dorff <jdorff@phy.duke.edu> Reported-and-tested-by: collura@ieee.org Cc: stable@vger.kernel.org # 3.2+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26USB: ftdi_sio: Add more identifiersAlan Cox2-0/+7
0x04d8, 0x000a: Hornby Elite Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25xHCI: Cleanup isoc transfer ring when TD length mismatch foundAndiry Xu1-1/+2
When a TD length mismatch is found during isoc TRB enqueue, it directly returns -EINVAL. However, isoc transfer is partially enqueued at this time, and the ring should be cleared. This should be backported to kernels as old as 2.6.36, which contain the commit 522989a27c7badb608155b1f1dea3487ed431f74 "xhci: Fix failed enqueue in the middle of isoch TD." Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-01-25Merge branch 'for-greg' of ↵Greg Kroah-Hartman16-2497/+37
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus * 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: musb: omap2430: minor cleanups. usb: dwc3: unmap the proper number of sg entries usb: musb: fix shutdown while usb gadget is in use usb: gadget: f_mass_storage: Use "bool" instead of "int" in fsg_module_parameters usb: gadget: check for streams only for SS udcs usb: gadget: fsl_udc: fix the usage of udc->max_ep drivers: usb: otg: Fix dependencies for some OTG drivers usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle() usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst too usb: gadget: storage: endian fix usb: dwc3: ep0: fix compile warning usb: musb: davinci: fix build breakage usb: gadget: langwell: don't call gadget's disconnect() usb: gadget: langwell: drop langwell_otg support usb: otg: kill langwell_otg driver usb: dwc3: ep0: tidy up Pending Request handling
2012-01-25usb: musb: omap2430: minor cleanups.NeilBrown1-2/+2
1/ remove incorrect comment (it is a non-blocking notifier) 2/ Use correct symbolic return value for notifier 3/ Make sure otg_notifier_work is cancelled before module exit. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24qcaux: add more Pantech UML190 and UML290 portsDan Williams1-1/+6
More ports we now know how to talk to. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24Revert "drivers: usb: Fix dependency for USB_HWA_HCD"Greg Kroah-Hartman1-1/+1
This reverts commit 0dd2b62ada6f911fbd13e98e98f57f4edc42c604. It causes a bunch of Kconfig errors: drivers/usb/host/Kconfig:559:error: recursive dependency detected! drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD showing that this really wasn't the correct fix at all. Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24usb: mv-otg - Fix build if CONFIG_USB is not setGeert Uytterhoeven1-0/+2
ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> -- Inpired by drivers/usb/otg/msm_otg.c. Is this correct? drivers/usb/otg/mv_otg.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPEBjørn Mork1-1/+3
The probe does not strictly require the USB_CDC_DMM_TYPE descriptor, which is a good thing as it makes the driver usable on non-conforming interfaces. A user could e.g. bind to it to a CDC ECM interface by using the new_id and bind sysfs files. But this would fail with a 0 buffer length due to the missing descriptor. Fix by defining a reasonable fallback size: The minimum device receive buffer size required by the CDC WMC standard, revision 1.1 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24usb: add support for STA2X11 host driverAlessandro Rubini2-0/+10
Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24drivers: usb: Fix dependency for USB_HWA_HCDFabio Estevam1-1/+1
Fix the following build warning: warning: (USB_HWA_HCD) selects UWB_HWA which has unmet direct dependencies (UWB && USB) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: OHCI: fix new compiler warningsAlan Stern1-2/+10
This patch (as1515) fixes some unavoidably dumb compiler warnings: CC [M] drivers/usb/renesas_usbhs/mod.o In file included from drivers/usb/host/ohci-hcd.c:101:0: drivers/usb/host/ohci-dbg.c: In function ‘fill_registers_buffer’: drivers/usb/host/ohci-dbg.c:656:2: warning: the comparison will always evaluate as ‘true’ for the address of ‘next’ will never be NULL [-Waddress] drivers/usb/host/ohci-dbg.c:675:3: warning: the comparison will always evaluate as ‘true’ for the address of ‘next’ will never be NULL [-Waddress] Instead of trying to fix the macro to work under all cirumstances, just add a second macro for use in cases where the "next" argument is the address of a local variable. Unfortunately the macro cannot be replaced by a real subroutine, because there's no va_list version of ohci_dbg() or dev_dbg(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24usb: serial: kobil_sct: fix compile warning:Felipe Balbi1-1/+1
Fix the following compile warning: drivers/usb/serial/kobil_sct.c: In function ‘__check_debug’: drivers/usb/serial/kobil_sct.c:719:1: warning: return from incompatible pointer type [enabled by default] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24drivers/usb/host/ehci-fsl.c: add missing iounmapJulia Lawall1-1/+1
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cdc-wdm: better allocate a buffer that is at least as big as we tell ↵Bjørn Mork1-1/+1
the USB core As it turns out, there was a mismatch between the allocated inbuf size (desc->bMaxPacketSize0, typically something like 64) and the length we specified in the URB (desc->wMaxCommand, typically something like 2048) Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removalBjørn Mork1-1/+1
wdm_disconnect() waits for the mutex held by wdm_read() before calling wake_up_all(). This causes a deadlock, preventing device removal to complete. Do the wake_up_all() before we start waiting for the locks. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cdc-wdm: use two mutexes to allow simultaneous read and writeBjørn Mork1-18/+31
using a separate read and write mutex for locking is sufficient to make the driver accept simultaneous read and write. This improves useability a lot. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cdc-wdm: updating desc->length must be protected by spin_lockBjørn Mork1-0/+2
wdm_in_callback() will also touch this field, so we cannot change it without locking Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: usbsevseg: fix max lengthHarrison Metzger1-1/+1
This changes the max length for the usb seven segment delcom device to 8 from 6. Delcom has both 6 and 8 variants and having 8 works fine with devices which are only 6. Signed-off-by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Stuart Pook <stuart@acm.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: option: Add LG docomo L-02CKentaro Matsuyama1-0/+5
Add vendor and product ID for USB 3G/LTE modem of docomo L-02C Signed-off-by: Kentaro Matsuyama <kentaro.matsuyama@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24usb: io_ti: Make edge_remove_sysfs_attrs the port_remove method.Eric W. Biederman1-8/+2
Calling edge_remove_sysfs_attrs from edge_disconnect is too late as the device has already been removed from sysfs. Do the simple and obvious thing and make edge_remove_sysfs_attrs the port_remove method. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Reported-by: Wolfgang Frisch <wfpub@roembden.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24Revert "USB: usb-skeleton.c: fix open/disconnect race"Greg Kroah-Hartman1-17/+1
This reverts commit 26c71a79cade5ccad80e0752cd82f3518df48fb3. It's not needed, to quote Ming Lei: Looks you have queued the patch into your tree, but just now I find the patch is not needed at all, since we have had minor_rwsem(drivers/usb/core/file.c) for this purpose, please drop the patch, sorry for it. Cc: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cp210x: allow more baud rates above 1MbaudJohan Hovold1-5/+6
Allow more baud rates to be set in [1M,2M] baud. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cp210x: initialise baud rate at openJohan Hovold1-0/+4
The newer cp2104 devices require the baud rate to be initialised after power on. Make sure it is set when port is opened. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cp210x: clean up, refactor and document speed handlingJohan Hovold1-14/+57
Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cp210x: do not map baud rates to B0Johan Hovold1-2/+2
We do not implement B0 hangup yet so map low baudrates to 300bps. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cp210x: fix up set_termios variablesJohan Hovold1-2/+3
[Based on a patch from Johan, mangled by gregkh to keep things in line] Fix up the variable usage in the set_termios call. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cp210x: fix CP2104 baudrate usagePreston Fick1-6/+4
This fix changes the way baudrates are set on the CP210x devices from Silicon Labs. The CP2101/2/3 will respond to both a GET/SET_BAUDDIV command, and GET/SET_BAUDRATE command, while CP2104 and higher devices only respond to GET/SET_BAUDRATE. The current cp210x.ko driver in kernel version 3.2.0 only implements the GET/SET_BAUDDIV command. This patch implements the two new codes for the GET/SET_BAUDRATE commands. Then there is a change in the way that the baudrate is assigned or retrieved. This is done according to the CP210x USB specification in AN571. This document can be found here: http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/AN571.pdf&src=DocumentationWebPart Sections 5.3/5.4 describe the USB packets for the old baudrate method. Sections 5.5/5.6 describe the USB packets for the new method. This patch also implements the new request scheme, and eliminates the unnecessary baudrate calculations since it uses the "actual baudrate" method. This patch solves the problem reported for the CP2104 in bug 42586, and also keeps support for all other devices (CP2101/2/3). This patchfile is also attached to the bug report on bugzilla.kernel.org. This patch has been developed and test on the 3.2.0 mainline kernel version under Ubuntu 10.11. Signed-off-by: Preston Fick <preston.fick@silabs.com> [duplicate patch also sent by Johan - gregkh] Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: cp210x: call generic open last in openJohan Hovold1-5/+2
Make sure port is fully initialised before calling generic open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19Renato Caldas1-0/+1
This device is a Oscilloscope/Logic Analizer/Pattern Generator/TDR, using a Silabs CP2103 USB to UART Bridge. Signed-off-by: Renato Caldas <rmsc@fe.up.pt> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: serial: ftdi additional IDsPeter Naulls2-0/+7
I tested this against 2.6.39 in the Ubuntu kernel, however I see the IDs are not in latest 3.2 git. This adds IDs for the FTDI controller in the Rainforest Automation Zigbee dongle. Signed-off-by: Peter Naulls <peter@chocky.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: ftdi_sio: add PID for TI XDS100v2 / BeagleBone A3Peter Korsgaard2-0/+9
Port A for JTAG, port B for serial. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: ftdi_sio: fix initial baud rateJohan Hovold1-2/+5
Fix regression introduced by commit b1ffb4c851f1 ("USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c") which caused the termios settings to no longer be initialised at open. Consequently it was no longer possible to set the port to the default speed of 9600 baud without first changing to another baud rate and back again. Reported-by: Roland Ramthun <mail@roland-ramthun.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Tested-by: Roland Ramthun <mail@roland-ramthun.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: ftdi_sio: fix TIOCSSERIAL baud_base handlingJohan Hovold1-2/+1
Return EINVAL if new baud_base does not match the current one. The baud_base is device specific and can not be changed. This restores the old (pre-2005) behaviour which was changed due to a misunderstanding regarding this fact (see https://lkml.org/lkml/2005/1/20/84). Reported-by: Torbjörn Lofterud <torbjorn@pi.nxs.se> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24drivers/usb/misc/emi26.c & emi62.c: fix warningsAndrew Morton2-6/+0
drivers/usb/misc/emi26.c:40: warning: 'emi26_init' declared 'static' but never defined drivers/usb/misc/emi26.c:41: warning: 'emi26_exit' declared 'static' but never defined drivers/usb/misc/emi62.c:49: warning: 'emi62_init' declared 'static' but never defined drivers/usb/misc/emi62.c:50: warning: 'emi62_exit' declared 'static' but never defined Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: xhci: Fix USB 3.0 device restart on resume.
2012-01-24usb: dwc3: unmap the proper number of sg entriesSebastian Andrzej Siewior1-1/+1
num_sgs contains the number of sgs assigned by the gadget. num_mapped_sgs contains the number of mapped sgs which may differ from the gadget's values. For dma_unmap_sg() we have to provide the value which was returned by dma_map_sg(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: musb: fix shutdown while usb gadget is in useGrazvydas Ignotas1-2/+3
If we shutdown without stopping the gadget first or removing the cable, gadget manages to configure itself again: root@pandora /root# poweroff The system is going down NOW! Requesting system poweroff [ 47.714385] musb-hm halted. [ 48.120697] gadget: suspend [ 48.123748] gadget: reset config [ 48.127227] gadget: ecm deactivated [ 48.130981] usb0: gether_disconnect [ 48.281799] gadget: high-speed config #1: CDC Ethernet (ECM) [ 48.287872] gadget: init ecm [ 48.290985] gadget: notify connect false [ 48.295288] gadget: notify speed 425984000 This is not only unwanted, it's also happening on half-unitialized state, after musb_shutdown() has returned, which sometimes causes hardware to fail to work after reboot. Let's better properly stop gadget on shutdown too. This patch moves musb_gadget_cleanup out of musb_free(), which has 2 callsites: probe error path and musb_remove. On probe error path it was superflous since musb_gadget_cleanup is called explicitly there, and musb_remove() calls musb_shutdown(), so cleanup will get called as before. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: f_mass_storage: Use "bool" instead of "int" in ↵Fabio Estevam1-5/+5
fsg_module_parameters Fix the following build warnings: CC [M] drivers/usb/gadget/acm_ms.o drivers/usb/gadget/acm_ms.c: In function ‘__check_ro’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_removable’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_cdrom’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_nofua’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_stall’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type CC [M] drivers/usb/gadget/mass_storage.o drivers/usb/gadget/mass_storage.c: In function ‘__check_ro’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_removable’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_cdrom’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_nofua’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_stall’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type Declare the fsg_module_parameters fields as "bool" so that they can match the types passed in FSG_MODULE_PARAM_ARRAY macro. Since commit 493c90ef (module_param: check that bool parameters really are bool.), moduleparam.h was changed in a way that the "bool" parameter type now really requires "bool" type and no longer allows "unsigned int". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: check for streams only for SS udcsSebastian Andrzej Siewior1-1/+1
Currently the UASP gadget fails to bind on an UDC which does not provide stream support. This is true for all udc in tree except for dummy and dwc3 since they don't support SuperSpeed. There is no need to test for the availability of stream support on those UDCs because we will never even try to use them. I think it is sane to assume that StreamSupport is always available on SuperSpeed since it is one of the key features. The host side will only allocate on SS so this part is also fine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: fsl_udc: fix the usage of udc->max_epPeter Chen1-2/+2
The max_ep is the number of endpoint * 2. But in dtd_complete_irq, it does again * 2, it will deference wrong memory after scanning max_ep - 1. The another similar problem is at USB_REQ_SET_FEATURE (the pipe number should be 0 and max_ep - 1). Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Matthieu castet <matthieu.castet@parrot.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24drivers: usb: otg: Fix dependencies for some OTG driversFabio Estevam1-2/+2
Fix the following build warning: warning: (USB_LANGWELL_OTG && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && EXPERIMENTAL && USB_SUSPEND) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle()Jesper Juhl1-1/+1
In drivers/usb/renesas_usbhs/mod_gadget.c::usbhsg_recip_run_handle() the Coverity Prevent checker currently flags a warning about possibly uninitialized use of 'ret' i usbhsg_recip_run_handle(). It does this since it assumes we take one of the non-default branches in the switch and then subsequently take the false branch in the 'if (func)' case below. This exact scenario will never happen, but Coverity can't see that for some reason. This patch initializes 'ret' to '0' when it is declared which should shut up this report and won't really hurt - so why not? At least then it's clear that 'ret' is always initialized.. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst tooPaul Zimmerman1-4/+3
SuperSpeed Isoc endpoints also use the bMaxBurst value from the companion descriptor. See section 9.6.7 in the USB 3.0 spec. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: storage: endian fixAndiry Xu1-3/+3
Fix some endian issues for storage gadgets. Cc: stable@vger.kernel.org Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: dwc3: ep0: fix compile warningFelipe Balbi1-1/+0
commit 34c60a7 (usb: dwc3: ep0: tidy up Pending Request handling) introduced a compile warning by leaving an unused variable. This patch fixes that warning: drivers/usb/dwc3/ep0.c: In function ‘__dwc3_gadget_ep0_queue’: drivers/usb/dwc3/ep0.c:129:8: warning: unused variable ‘type’ [-Wunused-variable] Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: musb: davinci: fix build breakageSekhar Nori1-3/+0
Commit 0020afb369859472a461ef4af6410732e929d402 (ARM: mach-davinci: remove mach/memory.h) removed mach/memory.h for DaVinci which broke DaVinci MUSB build. mach/memory.h is not actually needed in davinci.c, so remove it. While at it, also remove some more machine specific inclulde files which are not needed for build. Tested on DM644x EVM using USB card reader. Cc: stable@vger.kernel.org # v3.2 Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: langwell: don't call gadget's disconnect()Alexander Shishkin1-10/+8
UDC core will call disconnect() and unbind() for us upon the gadget removal, so we should not do it ourselves. Otherwise, a composite gadget will explode, for example. Others might too. This was introduced during conversion to new style gadget in 2c7f0989 (usb: gadget: langwell: convert to new style). Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v3.2 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>