summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2013-04-30drivers/usb/storage/realtek_cr.c: fix buildAndrew Morton1-4/+1
Remove unused local `us', which broke the build. Also nuke an unneeded cast. Repairs commit 191648d03d20 ("usb: storage: Convert US_DEBUGP to usb_stor_dbg"). Cc: Joe Perches <joe@perches.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30Merge branch 'for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small code cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits) mm: Convert print_symbol to %pSR gfs2: Convert print_symbol to %pSR m32r: Convert print_symbol to %pSR iostats.txt: add easy-to-find description for field 6 x86 cmpxchg.h: fix wrong comment treewide: Fix typo in printk and comments doc: devicetree: Fix various typos docbook: fix 8250 naming in device-drivers pata_pdc2027x: Fix compiler warning treewide: Fix typo in printks mei: Fix comments in drivers/misc/mei treewide: Fix typos in kernel messages pm44xx: Fix comment for "CONFIG_CPU_IDLE" doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP" mmzone: correct "pags" to "pages" in comment. kernel-parameters: remove outdated 'noresidual' parameter Remove spurious _H suffixes from ifdef comments sound: Remove stray pluses from Kconfig file radio-shark: Fix printk "CONFIG_LED_CLASS" doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE ...
2013-04-29Merge tag 'usb-3.10-rc1' of ↵Linus Torvalds267-9728/+9961
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...
2013-04-29Merge tag 'tty-3.10-rc1' of ↵Linus Torvalds12-151/+40
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg Kroah-Hartman: "Here's the big tty/serial driver merge request for 3.10-rc1 Once again, Jiri has a number of TTY driver fixes and cleanups, and Peter Hurley came through with a bunch of ldisc fixes that resolve a number of reported issues. There are some other serial driver cleanups as well. All of these have been in the linux-next tree for a while" * tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits) tty/serial/sirf: fix MODULE_DEVICE_TABLE serial: mxs: drop superfluous {get|put}_device serial: mxs: fix buffer overflow ARM: PL011: add support for extended FIFO-size of PL011-r1p5 serial_core.c: add put_device() after device_find_child() tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe serial: sccnxp: Replace pdata.init/exit with regulator API serial: sccnxp: Do not override device name TTY: pty, fix compilation warning TTY: rocket, fix compilation warning TTY: ircomm: fix DTR being raised on hang up TTY: synclinkmp: fix DTR being raised on hang up TTY: synclink_gt: fix DTR being raised on hang up TTY: synclink: fix DTR being raised on hang up serial: 8250_dw: Fix the stub for dw8250_probe_acpi() serial: 8250_dw: Convert to devm_ioremap() serial: 8250_dw: Set port capabilities based on CPR register serial: 8250_dw: Let ACPI code extract the DMA client info serial: 8250_dw: Support clk framework also with ACPI serial: 8250_dw: Enable runtime PM ...
2013-04-29Merge tag 'driver-core-3.10-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg Kroah-Hartman: "Here's the merge request for the driver core tree for 3.10-rc1 It's pretty small, just a number of driver core and sysfs updates and fixes, all of which have been in linux-next for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed conflict in kernel/rtmutex-tester.c, the locking tree had a better fix for the same sysfs file mode problem. * tag 'driver-core-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: PM / Runtime: Idle devices asynchronously after probe|release driver core: handle user namespaces properly with the uid/gid devtmpfs change driver core: devtmpfs: fix compile failure with CONFIG_UIDGID_STRICT_TYPE_CHECKS devtmpfs: add base.h include driver core: add uid and gid to devtmpfs sysfs: check if one entry has been removed before freeing sysfs: fix crash_notes_size build warning sysfs: fix use after free in case of concurrent read/write and readdir rtmutex-tester: fix mode of sysfs files Documentation: Add ABI entry for crash_notes and crash_notes_size sysfs: Add crash_notes_size to export percpu note size driver core: platform_device.h: fix checkpatch errors and warnings driver core: platform.c: fix checkpatch errors and warnings driver core: warn that platform_driver_probe can not use deferred probing sysfs: use atomic_inc_unless_negative in sysfs_get_active base: core: WARN() about bogus permissions on device attributes device: separate all subsys mutexes
2013-04-25USB: ehci-msm: USB_MSM_OTG needs USB_PHYArnd Bergmann1-0/+1
The Kconfig entry for USB_EHCI_MSM unconditionally selects USB_MSM_OTG, which is now only visible when USB_PHY is also enabled. This adds an appropriate dependency and enables USB_PHY in the msm defconfig, avoiding the Kbuild warning: warning: (USB_EHCI_MSM) selects USB_MSM_OTG which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && ARCH_MSM) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-25USB: OHCI: avoid conflicting platform driversArnd Bergmann1-18/+118
Like the EHCI driver, OHCI supports a large number of different platform glue drivers by directly including them, which causes problems with conflicting macro definitions in some cases. As more ARM architecture specific back-ends are required to coexist in a single build, we should split those out into separate drivers. Unfortunately, the infrastructure for that is still under development, so to give us more time, this uses a separate *_PLATFORM_DRIVER macro for each ARM specific OHCI backend, just like we already do on PowerPC and some of the other ARM platforms. In linux-3.10, only the SPEAr and CNS3xxx back-ends would actually conflict without this patch, but over time we would get more of them, so this is a way to avoid having to patch the driver every time it breaks. We should still split out all back-ends into separate loadable modules, but that work is only needed to improve code size and cleanliness after this patch, not for correctness. While we're here, this fixes the incorrectly sorted error path for the OMAP1 and OMAP3 backends to ensure we always unregister the exact set of drivers that were registered before erroring out. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-25USB: OMAP: ISP1301 needs USB_PHYArnd Bergmann2-1/+2
The Kconfig entry for USB_OMAP unconditionally selects USB_ISP1301, which is now only visible when USB_PHY is also enabled. This adds an appropriate dependency and enables USB_PHY in the omap1 defconfig, avoiding these build warnings: warning: (USB_OHCI_HCD && USB_OMAP) selects ISP1301_OMAP which has unmet direct dependencies (USB_SUPPORT && USB_PHY && I2C && ARCH_OMAP_OTG) Also fix a Makefile typo while we're at it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-25USB: lpc32xx: ISP1301 needs USB_PHYArnd Bergmann1-0/+1
The Kconfig entry for USB_LPC32XX unconditionally selects USB_ISP1301, which is now only visible when USB_PHY is also enabled. This adds an appropriate dependency and enables USB_PHY in the msm defconfig, avoiding these build errors: warning: (USB_LPC32XX) selects USB_ISP1301 which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && I2C) drivers/built-in.o: In function `usb_hcd_nxp_probe': drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client' drivers/built-in.o: In function `lpc32xx_udc_probe': drivers/usb/gadget/lpc32xx_udc.c:3071: undefined reference to `isp1301_get_client' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-24USB: ftdi_sio: enable two UART ports on ST Microconnect LiteAdrian Thomasset1-7/+11
The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23usb: phy: tegra: don't call into tegra-ehci directlyArnd Bergmann2-9/+14
Both phy-tegra-usb.c and ehci-tegra.c export symbols used by the other one, which does not work if one of them or both are loadable modules, resulting in an error like: drivers/built-in.o: In function `utmi_phy_clk_disable': drivers/usb/phy/phy-tegra-usb.c:302: undefined reference to `tegra_ehci_set_phcd' drivers/built-in.o: In function `utmi_phy_clk_enable': drivers/usb/phy/phy-tegra-usb.c:324: undefined reference to `tegra_ehci_set_phcd' drivers/built-in.o: In function `utmi_phy_power_on': drivers/usb/phy/phy-tegra-usb.c:447: undefined reference to `tegra_ehci_set_pts' This turns the interface into a one-way dependency by letting the tegra ehci driver pass two function pointers for callbacks that need to be called by the phy driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@ti.com> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23usb: phy: phy core cannot yet be a moduleArnd Bergmann1-1/+1
A lot of platform code calls into the usb phy core at the moment, which does not work if it is built as a loadable module. This will hopefully change when those platforms are all converted to DT based probing, but for now, the easiest solution is to change it from "tristate" to "bool". This solves at least these ARM allmodconfig build errors: arch/arm/mach-imx/built-in.o: In function `imx_otg_ulpi_create': arch/arm/mach-imx/ulpi.c:117: undefined reference to `otg_ulpi_create' arch/arm/mach-omap2/built-in.o: In function `usbhs_init_phys': arch/arm/mach-omap2/usb-host.c:652: undefined reference to `usb_bind_phy' arch/arm/mach-omap2/built-in.o: In function `omap_2430sdp_init': arch/arm/mach-omap2/board-2430sdp.c:236: undefined reference to `usb_bind_phy' arch/arm/mach-omap2/built-in.o: In function `omap3_beagle_init': arch/arm/mach-omap2/board-omap3beagle.c:554: undefined reference to `usb_bind_phy' arch/arm/mach-omap2/built-in.o: In function `devkit8000_init': arch/arm/mach-omap2/board-devkit8000.c:596: undefined reference to `usb_bind_phy' arch/arm/mach-omap2/built-in.o: In function `omap_ldp_init': arch/arm/mach-omap2/board-ldp.c:379: undefined reference to `usb_bind_phy' drivers/built-in.o: In function `ab8500_charger_probe': drivers/power/ab8500_charger.c:3629: undefined reference to `usb_get_phy' drivers/power/ab8500_charger.c:3706: undefined reference to `usb_put_phy' drivers/built-in.o: In function `ab8500_charger_remove': drivers/power/ab8500_charger.c:3411: undefined reference to `usb_put_phy' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23USB: Fix initconst in ehci driverAndi Kleen3-3/+3
Fix some of the initconst markings in the ehci driver(s). Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23usb-storage: CY7C68300A chips do not support Cypress ATACBTormod Volden1-2/+14
Many cards based on CY7C68300A/B/C use the USB ID 04b4:6830 but only the B and C variants (EZ-USB AT2LP) support the ATA Command Block functionality, according to the data sheets. The A variant (EZ-USB AT2) locks up if ATACB is attempted, until a typical 30 seconds timeout runs out and a USB reset is performed. https://bugs.launchpad.net/bugs/428469 It seems that one way to spot a CY7C68300A (at least where the card manufacturer left Cypress' EEPROM default vaules, against Cypress' recommendations) is to look at the USB string descriptor indices. A http://media.digikey.com/pdf/Data%20Sheets/Cypress%20PDFs/CY7C68300A.pdf B http://www.farnell.com/datasheets/43456.pdf C http://www.cypress.com/?rID=14189 Note that a CY7C68300B/C chip appears as CY7C68300A if it is running in Backward Compatibility Mode, and if ATACB would be supported in this case there is anyway no way to tell which chip it really is. For 5 years my external USB drive has been locking up for half a minute when plugged in and ata_id is run by udev, or anytime hdparm or similar is run on it. Finally looking at the /correct/ datasheet I think I found the reason. I am aware the quirk in this patch is a bit hacky, but the hardware manufacturers haven't made it easy for us. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23USB: serial: option: Added support Olivetti Olicard 145Filippo Turato1-0/+2
This adds PID for Olivetti Olicard 145 in option.c Signed-off-by: Filippo Turato <nnj7585@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23USB: ftdi_sio: correct ST Micro Connect Lite PIDsAdrian Thomasset2-2/+5
The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23Merge tag 'usb-for-v3.10-part2' of ↵Greg Kroah-Hartman6-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: urgent fixes for v3.10 merge window Here are some late urgent fixes for v3.10 merge window. All of these errors were introduced by recent commits which are in linux-next. f_obex, multi and cdc2 gadget drivers have learned to return a proper error code when something goes wrong. usb_bind_phy() was mistakenly placed into .init.text section which caused Section mismatch warnings and undefined reference compile errors. f_source_sink had a copy-paste error which is now corrected. g_zero got a memory leak plugged. Two defconfigs got fixed to enable the newly introduced CONFIG_USB_PHY.
2013-04-23usb: phy: remove exported function from __init sectionDenis Efremov1-1/+1
The symbol usb_bind_phy is exported and annotated __init. It looks like section mismatch. Fix by removing the __init annotation of usb_bind_phy. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-23usb: gadget: zero: put function instances on unbindAndrzej Pietrasiewicz1-0/+2
If function instances are not put on gadget's unbind, their implementation module's refcount is nonzero and it is impossible to unload them. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-23usb: gadget: f_sourcesink.c: correct a copy-paste misnomerAndrzej Pietrasiewicz1-2/+2
acm was the first function to be converted and it seems that its code served as a base for converting f_sourcesink to the new function interface. source_sink has nothing to do with acm, though. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-23usb: gadget: cdc2: fix error return code in cdc_do_config()Wei Yongjun1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Introduced by commit 29a664 (usb: gadget: cdc2: use function framework for ACM) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-23usb: gadget: multi: fix error return code in rndis_do_config()Wei Yongjun1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Introduced by commit 59835a (usb: gadget: multi: use function framework for ACM.) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-23usb: gadget: f_obex: fix error return code in obex_bind()Wei Yongjun1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-19USB: storage: convert to use module_usb_driver()Greg Kroah-Hartman1-29/+1
Now that Joe cleaned up the init/exit functions, we can just get rid of them entirely and use the proper macro that almost all other USB drivers now use. Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19usb: storage: Convert US_DEBUGP to usb_stor_dbgJoe Perches20-834/+753
Use a more current logging style with dev_printk where possible. o Convert uses of US_DEBUGP to usb_stor_dbg o Add "struct us_data *" to usb_stor_dbg uses o usb_stor_dbg now uses struct device */dev_vprint_emit o Removed embedded function names o Coalesce formats o Remove trailing whitespace o Remove useless OOM messages o Remove useless function entry/exit logging o Convert some US_DEBUGP uses to dev_info and dev_dbg Object size is slightly reduced when debugging is enabled, slightly increased with no debugging because some initialization and removal messages are now always emitted. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: kill custom closing_waitJohan Hovold1-54/+15
Kill custom closing_wait implementation and let the tty-layer handle it instead. Note that the port drain-delay is set to three characters to keep the 20ms delay after wait_until_sent at low baudrates (1200 baud) during close. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: remove redundant drain from break_ctlJohan Hovold1-2/+0
Remove redundant drain, which has already been handled by the tty-layer, from break_ctl. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_bufferJohan Hovold1-0/+8
Query hardware-buffer status in chars_in_buffer should the write fifo be empty. This is needed to make the tty layer wait for hardware buffers to drain on close. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: remove lsr from port dataJohan Hovold1-7/+7
The line status register is only polled so let's not keep a possibly outdated value in the port data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: move write-fifo flushing to closeJohan Hovold1-9/+8
Move write-fifo flushing from ti_drain to close where it belongs. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: io_ti: remove redundant wait_until_sentJohan Hovold1-2/+0
Remove redundant wait_until_sent, which has already been handled by the tty-layer, from break_ctl. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: io_ti: fix TIOCGSERIALJohan Hovold1-1/+1
Fix regression introduced by commit f40d78155 ("USB: io_ti: kill custom closing_wait implementation") which made TIOCGSERIAL return the wrong value for closing_wait. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.9 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: usbtmc: remove unnecessary memory allocationMing Lei1-22/+4
Inside usbtmc_ioctl_clear_out_halt()/usbtmc_ioctl_clear_in_halt(), usb_clear_halt() needn't any buffer to pass in, so remove the unnecessary memory allocation. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19usbatm: fix potential NULL pointer dereferenceWei Yongjun1-3/+3
The dereference to 'instance' in the debug code should be moved below the NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-18usb: storage: Fix link errorJoe Perches1-0/+2
Fix allmodconfig link error introduced by commit 75b9130e8a ("usb: storage: Add usb_stor_dbg, reduce object size") Export the symbol usb_stor_dbg. Add export.h Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: symbolserial: move private-data allocation to port_probeJohan Hovold1-11/+19
Allocate port-private data in port-probe rather than in attach. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: symbolserial: remove unused private dataJohan Hovold1-5/+1
Use port device for debug messages in interrupt-urb callback and remove unused private data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: symbolserial: use port interrupt-in urbJohan Hovold1-90/+12
Use the port interrupt-in urb rather managing a private one. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: mct_u232: clean up read implementationJohan Hovold1-26/+11
The device uses the second interrupt-in endpoint of the interface for reading. Stop abusing the port read urb and store a pointer to the second interrupt-in urb as port-private data instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: kobil_sct: use port interrupt-out urbJohan Hovold1-67/+8
Use the port interrupt-out urb rather than abusing the port write_urb pointer and allocating a new urb at every open (but the first...). Note that the write_urb abuse would have led to a double free should there ever be interfaces with a bulk-out endpoint. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: kobil_sct: remove unused endpoint addressJohan Hovold1-8/+0
Remove unused interrupt-in endpoint address from private data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: kobil_sct: fix broken debug codeJohan Hovold1-18/+2
Replace broken and commented-out debug code with usb_serial_debug_data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: switch to generic read implementationJohan Hovold1-40/+3
Switch to the more efficient generic read implementation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: refactor read-urb processingJohan Hovold1-7/+18
Refactor read-urb processing, and add sanity checks on header and data lengths. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: clean up protocol definesJohan Hovold1-7/+7
Remove redundant data-offset define, which was really just the header length. Add payload-size define and use the bulk-out size define for the actual bulk-out size. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: clean up protocol descriptionJohan Hovold1-7/+6
Clean up and fix typos in protocol comment. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: use kzalloc for private dataJohan Hovold1-1/+1
Make sure the port private data, which contains the write sequence number, is cleared at allocation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: ehci-omap: Improve PHY error handlingRoger Quadros1-2/+2
As the USB PHY layer never returns NULL we don't need to check for that condition. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: ehci-omap: Don't select any PHY driverRoger Quadros1-1/+3
Don't select NOP_USB_XCEIV. Instead, board config must select USB_PHY and the appropriate PHY driver. Also add a hint in Kconfig so that users enabling this driver manually enable the right PHY drivers as well. Gets rid of the below warnings when USB_EHCI_HCD_OMAP is enabled. warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY) warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY) Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl epHans de Goede1-0/+2
When usbfs receives a ctrl-request from userspace it calls check_ctrlrecip, which for a request with USB_RECIP_ENDPOINT tries to map this to an interface to see if this interface is claimed, except for ctrl-requests with a type of USB_TYPE_VENDOR. When trying to use this device: http://www.akaipro.com/eiepro redirected to a Windows vm running on qemu on top of Linux. The windows driver makes a ctrl-req with USB_TYPE_CLASS and USB_RECIP_ENDPOINT with index 0, and the mapping of the endpoint (0) to the interface fails since ep 0 is the ctrl endpoint and thus never is part of an interface. This patch fixes this ctrl-req failing by skipping the checkintf call for USB_RECIP_ENDPOINT ctrl-reqs on the ctrl endpoint. Reported-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Tested-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>