summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2019-10-31usb: dwc3: gadget: fix race when disabling ep with cancelled xfersFelipe Balbi1-0/+6
When disabling an endpoint which has cancelled requests, we should make sure to giveback requests that are currently pending in the cancelled list, otherwise we may fall into a situation where command completion interrupt fires after endpoint has been disabled, therefore causing a splat. Fixes: fec9095bdef4 "usb: dwc3: gadget: remove wait_end_transfer" Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Link: https://lore.kernel.org/r/20191031090713.1452818-1-felipe.balbi@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-30usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed hostRoger Quadros1-5/+26
Take into account gadget driver's speed limit when programming controller speed. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191030121607.21739-1-rogerq@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-30usb: cdns3: gadget: reset EP_CLAIMED flag while unloadingSanket Parmar1-0/+2
EP_CLAIMED flag is used to track the claimed endpoints. While unloading the module, Reset EP_CLAIMED flag for all enabled endpoints. So that it can be reused. Signed-off-by: Sanket Parmar <sparmar@cadence.com> Acked-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20191029122441.5816-1-sparmar@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-30USB: serial: whiteheat: fix line-speed endiannessJohan Hovold2-4/+7
Add missing endianness conversion when setting the line speed so that this driver might work also on big-endian machines. Also use an unsigned format specifier in the corresponding debug message. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191029102354.2733-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-30USB: serial: whiteheat: fix potential slab corruptionJohan Hovold1-0/+4
Fix a user-controlled slab buffer overflow due to a missing sanity check on the bulk-out transfer buffer used for control requests. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191029102354.2733-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29USB: gadget: Reject endpoints with 0 maxpacket valueAlan Stern1-0/+11
Endpoints with a maxpacket length of 0 are probably useless. They can't transfer any data, and it's not at all unlikely that a UDC will crash or hang when trying to handle a non-zero-length usb_request for such an endpoint. Indeed, dummy-hcd gets a divide error when trying to calculate the remainder of a transfer length by the maxpacket value, as discovered by the syzbot fuzzer. Currently the gadget core does not check for endpoints having a maxpacket value of 0. This patch adds a check to usb_ep_enable(), preventing such endpoints from being used. As far as I know, none of the gadget drivers in the kernel tries to create an endpoint with maxpacket = 0, but until now there has been nothing to prevent userspace programs under gadgetfs or configfs from doing it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+8ab8bf161038a8768553@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281052370.1485-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather ↵Alan Stern1-20/+0
segments") Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"), copying a similar commit for usb-storage, attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that the analogous change in usb-storage interacted badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting in the uas driver. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to head off potential problems similar to those affecting usb-storage, this patch reverts commit 3ae62a42090f. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oneukum@suse.com> CC: <stable@vger.kernel.org> Acked-by: Christoph Hellwig <hch@lst.de> Fixes: 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910231132470.1878-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28usb-storage: Revert commit 747668dbc061 ("usb-storage: Set ↵Alan Stern1-10/+0
virt_boundary_mask to avoid SG overflows") Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that this interacts badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting for usb-storage. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to fix the swiotlb problem, this patch reverts commit 747668dbc061. Reported-and-tested-by: Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Seth Bollinger <Seth.Bollinger@digi.com> CC: <stable@vger.kernel.org> Fixes: 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") Acked-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910211145520.1673-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28usbip: Fix free of unallocated memory in vhci txSuwan Kim1-0/+3
iso_buffer should be set to NULL after use and free in the while loop. In the case of isochronous URB in the while loop, iso_buffer is allocated and after sending it to server, buffer is deallocated. And then, if the next URB in the while loop is not a isochronous pipe, iso_buffer still holds the previously deallocated buffer address and kfree tries to free wrong buffer address. Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Reviewed-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191022093017.8027-1-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28usb: xhci: fix __le32/__le64 accessors in debugfs codeBen Dooks (Codethink)1-12/+12
It looks like some of the xhci debug code is passing u32 to functions directly from __le32/__le64 fields. Fix this by using le{32,64}_to_cpu() on these to fix the following sparse warnings; xhci-debugfs.c:205:62: warning: incorrect type in argument 1 (different base types) xhci-debugfs.c:205:62: expected unsigned int [usertype] field0 xhci-debugfs.c:205:62: got restricted __le32 xhci-debugfs.c:206:62: warning: incorrect type in argument 2 (different base types) xhci-debugfs.c:206:62: expected unsigned int [usertype] field1 xhci-debugfs.c:206:62: got restricted __le32 ... [Trim down commit message, sparse warnings were similar -Mathias] Cc: <stable@vger.kernel.org> # 4.15+ Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1572013829-14044-4-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28usb: xhci: fix Immediate Data Transfer endiannessSamuel Holland1-0/+2
The arguments to queue_trb are always byteswapped to LE for placement in the ring, but this should not happen in the case of immediate data; the bytes copied out of transfer_buffer are already in the correct order. Add a complementary byteswap so the bytes end up in the ring correctly. This was observed on BE ppc64 with a "Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller [104c:8241]" as a ch341 usb-serial adapter ("1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter") always transmitting the same character (generally NUL) over the serial link regardless of the key pressed. Cc: <stable@vger.kernel.org> # 5.2+ Fixes: 33e39350ebd2 ("usb: xhci: add Immediate Data Transfer support") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1572013829-14044-3-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28xhci: Fix use-after-free regression in xhci clear hub TT implementationMathias Nyman1-9/+45
commit ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") schedules work to clear TT buffer, but causes a use-after-free regression at the same time Make sure hub_tt_work finishes before endpoint is disabled, otherwise the work will dereference already freed endpoint and device related pointers. This was triggered when usb core failed to read the configuration descriptor of a FS/LS device during enumeration. xhci driver queued clear_tt_work while usb core freed and reallocated a new device for the next enumeration attempt. EHCI driver implents ehci_endpoint_disable() that makes sure clear_tt_work has finished before it returns, but xhci lacks this support. usb core will call hcd->driver->endpoint_disable() callback before disabling endpoints, so we want this in xhci as well. The added xhci_endpoint_disable() is based on ehci_endpoint_disable() Fixes: ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") Cc: <stable@vger.kernel.org> # v5.3 Reported-by: Johan Hovold <johan@kernel.org> Suggested-by: Johan Hovold <johan@kernel.org> Reviewed-by: Johan Hovold <johan@kernel.org> Tested-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1572013829-14044-2-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28USB: ldusb: fix control-message timeoutJohan Hovold1-1/+1
USB control-message timeouts are specified in milliseconds, not jiffies. Waiting 83 minutes for a transfer to complete is a bit excessive. Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+a4fbb3bb76cda0ea4e58@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191022153127.22295-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28USB: ldusb: use unsigned size format specifiersJohan Hovold1-3/+4
A recent info-leak bug manifested itself along with warning about a negative buffer overflow: ldusb 1-1:0.28: Read buffer overflow, -131383859965943 bytes dropped when it was really a rather large positive one. A sanity check that prevents this has now been put in place, but let's fix up the size format specifiers, which should all be unsigned. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191022143203.5260-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28USB: ldusb: fix ring-buffer lockingJohan Hovold1-2/+2
The custom ring-buffer implementation was merged without any locking or explicit memory barriers, but a spinlock was later added by commit 9d33efd9a791 ("USB: ldusb bugfix"). The lock did not cover the update of the tail index once the entry had been processed, something which could lead to memory corruption on weakly ordered architectures or due to compiler optimisations. Specifically, a completion handler running on another CPU might observe the incremented tail index and update the entry before ld_usb_read() is done with it. Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Fixes: 9d33efd9a791 ("USB: ldusb bugfix") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191022143203.5260-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28USB: Skip endpoints with 0 maxpacket lengthAlan Stern1-0/+5
Endpoints with a maxpacket length of 0 are probably useless. They can't transfer any data, and it's not at all unlikely that an HCD will crash or hang when trying to handle an URB for such an endpoint. Currently the USB core does not check for endpoints having a maxpacket value of 0. This patch adds a check, printing a warning and skipping over any endpoints it catches. Now, the USB spec does not rule out endpoints having maxpacket = 0. But since they wouldn't have any practical use, there doesn't seem to be any good reason for us to accept them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281050420.1485-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-27usb: cdns3: gadget: Don't manage pullupsRoger Quadros1-4/+0
The USB gadget core is supposed to manage pullups of the controller. Don't manage pullups from within the controller driver. Otherwise, function drivers are not able to keep the controller disconnected from the bus till they are ready. (e.g. g_webcam) Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: dwc3: remove the call trace of USBx_GFLADJYinbo Zhu1-2/+1
layerscape board sometimes reported some usb call trace, that is due to kernel sent LPM tokerns automatically when it has no pending transfers and think that the link is idle enough to enter L1, which procedure will ask usb register has a recovery,then kernel will compare USBx_GFLADJ and set GFLADJ_30MHZ, GFLADJ_30MHZ_REG until GFLADJ_30MHZ is equal 0x20, if the conditions were met then issue occur, but whatever the conditions whether were met that usb is all need keep GFLADJ_30MHZ of value is 0x20 (xhci spec ask use GFLADJ_30MHZ to adjust any offset from clock source that generates the clock that drives the SOF counter, 0x20 is default value of it)That is normal logic, so need remove the call trace. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: gadget: configfs: fix concurrent issue between composite APIsPeter Chen1-5/+105
We meet several NULL pointer issues if configfs_composite_unbind and composite_setup (or composite_disconnect) are running together. These issues occur when do the function switch stress test, the configfs_compsoite_unbind is called from user mode by echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt or disconnect interrupt occurs by hardware. The composite_setup will get the cdev from get_gadget_data, but configfs_composite_unbind will set gadget data as NULL, so the NULL pointer issue occurs. This concurrent is hard to reproduce by native kernel, but can be reproduced by android kernel. In this commit, we introduce one spinlock belongs to structure gadget_info since we can't use the same spinlock in usb_composite_dev due to exclusive running together between composite_setup and configfs_composite_unbind. And one bit flag 'unbind' to indicate the code is at unbind routine, this bit is needed due to we release the lock at during configfs_composite_unbind sometimes, and composite_setup may be run at that time. Several oops: oops 1: android_work: sent uevent USB_STATE=CONNECTED configfs-gadget gadget: super-speed config #1: b android_work: sent uevent USB_STATE=CONFIGURED init: Received control message 'start' for 'adbd' from pid: 3515 (system_server) Unable to handle kernel NULL pointer dereference at virtual address 0000002a init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/android.hardware.usb@1.1-servic) Mem abort info: Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000 [000000000000002a] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty #16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2a98000 task.stack: ffff00000b7b8000 PC is at composite_setup+0x44/0x1508 LR is at android_setup+0xb8/0x13c pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5 sp : ffff00000b7bbb80 x29: ffff00000b7bbb80 x28: ffff8008f2a3c010 x27: 0000000000000001 x26: 0000000000000000 [1232/1897] audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64 x25: 00000000ffffffa1 x24: ffff8008f2a3c010 audit: rate limit exceeded x23: 0000000000000409 x22: ffff000009c8e000 x21: ffff8008f7a8b428 x20: ffff00000afae000 x19: ffff0000089ff000 x18: 0000000000000000 x17: 0000000000000000 x16: ffff0000082b7c9c x15: 0000000000000000 x14: f1866f5b952aca46 x13: e35502e30d44349c x12: 0000000000000008 x11: 0000000000000008 x10: 0000000000000a30 x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90 x7 : ffff8008f27a9c90 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00 X7: 0xffff8008f27a9c10: 9c10 00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040 9c30 00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000 9c50 00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078 9c70 00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000 9c90 00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008 9cb0 f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001 9cd0 870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000 using random self ethernet address 9cf0 019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000 using random host ethernet address 00000000 X8: 0xffff8008f2a98a10: 8a10 00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000 8a30 eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000 8a50 f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000 8a70 fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000 8a90 080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000 8ab0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8ad0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8af0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 X21: 0xffff8008f7a8b3a8: b3a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3e8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b408 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000 b428 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b448 0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003 b468 e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008 b488 f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000 X24: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 X28: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000) Call trace: Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80) ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000 ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90 ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008 baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000 bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000 bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409 bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001 bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80 bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00 bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c [<ffff0000089ffb3c>] composite_setup+0x44/0x1508 [<ffff000008a032fc>] android_setup+0xb8/0x13c [<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70 [<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654 [<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc [<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68 [<ffff000008145bf0>] irq_thread_fn+0x28/0x88 [<ffff000008145e38>] irq_thread+0x13c/0x228 [<ffff0000080fed70>] kthread+0x104/0x130 [<ffff000008085064>] ret_from_fork+0x10/0x18 oops2: composite_disconnect: Calling disconnect on a Gadget that is not connected android_work: did not send uevent (0 0 (null)) init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx) init: Sending signal 9 to service 'adbd' (pid 22343) process group... ------------[ cut here ]------------ audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64 audit: rate limit exceeded WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88 Modules linked in: CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty #16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2349c00 task.stack: ffff00000b0a8000 PC is at composite_disconnect+0x80/0x88 LR is at composite_disconnect+0x80/0x88 pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5 sp : ffff000008003dd0 x29: ffff000008003dd0 x28: ffff8008f2349c00 x27: ffff000009885018 x26: ffff000008004000 Timeout for IPC response! x25: ffff000009885018 x24: ffff000009c8e280 x23: ffff8008f2d98010 x22: 00000000000001c0 x21: ffff8008f2d98394 x20: ffff8008f2d98010 x19: 0000000000000000 x18: 0000e3956f4f075a fxos8700 4-001e: i2c block read acc failed x17: 0000e395735727e8 x16: ffff00000829f4d4 x15: ffffffffffffffff x14: 7463656e6e6f6320 x13: 746f6e2009090920 x12: 7369207461687420 x11: 7465676461472061 x10: 206e6f207463656e x9 : 6e6f637369642067 x8 : ffff000009c8e280 x7 : ffff0000086ca6cc x6 : ffff000009f15e78 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffffffffffff x2 : c3f28b86000c3900 x1 : c3f28b86000c3900 x0 : 000000000000004e X20: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain 7fd0 Timeout for IPC response! 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 using random self ethernet address 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc using random host ethernet address ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X21: 0xffff8008f2d98314: 8314 ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8334 00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000 8354 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8374 00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000 8394 e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400 Timeout for IPC response! 83b4 ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018 83d4 ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918 83f4 ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000 X23: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X28: 0xffff8008f2349b80: 9b80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ba0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9bc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9be0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9c00 00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000 9c20 0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000 9c40 00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008 9c60 00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000 Call trace: Exception stack(0xffff000008003c90 to 0xffff000008003dd0) 3c80: 000000000000004e c3f28b86000c3900 3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000 3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067 3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920 3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8 3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394 3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018 3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0 3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5 3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000 init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx) 3dc0: ffff000008003dd0 ffff0000089ff9b0 [<ffff0000089ff9b0>] composite_disconnect+0x80/0x88 [<ffff000008a044d4>] android_disconnect+0x3c/0x68 [<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8 [<ffff0000089b84c0>] cdns3_irq+0x44/0x94 [<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c [<ffff000008144c0c>] handle_irq_event+0x58/0xc0 [<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180 [<ffff000008143a10>] generic_handle_irq+0x24/0x38 [<ffff000008144170>] __handle_domain_irq+0x60/0xac [<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: dwc3: pci: prevent memory leak in dwc3_pci_probeNavid Emamdoost1-1/+1
In dwc3_pci_probe a call to platform_device_alloc allocates a device which is correctly put in case of error except one case: when the call to platform_device_add_properties fails it directly returns instead of going to error handling. This commit replaces return with the goto. Fixes: 1a7b12f69a94 ("usb: dwc3: pci: Supply device properties via driver data") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: gadget: composite: Fix possible double free memory bugChandana Kishori Chiluveru1-0/+4
composite_dev_cleanup call from the failure of configfs_composite_bind frees up the cdev->os_desc_req and cdev->req. If the previous calls of bind and unbind is successful these will carry stale values. Consider the below sequence of function calls: configfs_composite_bind() composite_dev_prepare() - Allocate cdev->req, cdev->req->buf composite_os_desc_req_prepare() - Allocate cdev->os_desc_req, cdev->os_desc_req->buf configfs_composite_unbind() composite_dev_cleanup() - free the cdev->os_desc_req->buf and cdev->req->buf Next composition switch configfs_composite_bind() - If it fails goto err_comp_cleanup will call the composite_dev_cleanup() function composite_dev_cleanup() - calls kfree up with the stale values of cdev->req->buf and cdev->os_desc_req from the previous configfs_composite_bind call. The free call on these stale values leads to double free. Hence, Fix this issue by setting request and buffer pointer to NULL after kfree. Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode.Cristian Birsan1-2/+4
Fix interrupt storm generated by endpoints when working in FIFO mode. The TX_COMPLETE interrupt is used only by control endpoints processing. Do not enable it for other types of endpoints. Fixes: 914a3f3b3754 ("USB: add atmel_usba_udc driver") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: renesas_usbhs: fix type of bufBen Dooks (Codethink)1-1/+1
Fix the type of buf in __usbhsg_recip_send_status to be __le16 to avoid the following sparse warning: drivers/usb/renesas_usbhs/mod_gadget.c:335:14: warning: incorrect type in assignment (different base types) drivers/usb/renesas_usbhs/mod_gadget.c:335:14: expected unsigned short drivers/usb/renesas_usbhs/mod_gadget.c:335:14: got restricted __le16 [usertype] Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: renesas_usbhs: Fix warnings in usbhsg_recip_handler_std_set_device()Yoshihiro Shimoda1-1/+1
This patch fixes the following sparse warnings by shifting 8-bits after le16_to_cpu(). drivers/usb/renesas_usbhs/mod_gadget.c:268:47: warning: restricted __le16 degrades to integer drivers/usb/renesas_usbhs/mod_gadget.c:268:47: warning: cast to restricted __le16 Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: gadget: udc: renesas_usb3: Fix __le16 warningsYoshihiro Shimoda1-5/+6
This patch fixes the following sparse warnings by using a macro and a suitable variable type. drivers/usb/gadget/udc/renesas_usb3.c:1547:17: warning: restricted __le16 degrades to integer drivers/usb/gadget/udc/renesas_usb3.c:1550:43: warning: incorrect type in argument 2 (different base types) drivers/usb/gadget/udc/renesas_usb3.c:1550:43: expected unsigned short [usertype] addr drivers/usb/gadget/udc/renesas_usb3.c:1550:43: got restricted __le16 [usertype] wValue drivers/usb/gadget/udc/renesas_usb3.c:1607:24: warning: incorrect type in assignment (different base types) drivers/usb/gadget/udc/renesas_usb3.c:1607:24: expected unsigned short [assigned] [usertype] status drivers/usb/gadget/udc/renesas_usb3.c:1607:24: got restricted __le16 [usertype] drivers/usb/gadget/udc/renesas_usb3.c:1775:17: warning: restricted __le16 degrades to integer Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: renesas_usbhs: fix __le16 warningsBen Dooks (Codethink)1-6/+6
Fix the warnings generated by casting to/from __le16 without using the correct functions. Fixes the following sparse warnings: drivers/usb/renesas_usbhs/common.c:165:25: warning: incorrect type in assignment (different base types) drivers/usb/renesas_usbhs/common.c:165:25: expected restricted __le16 [usertype] wValue drivers/usb/renesas_usbhs/common.c:165:25: got unsigned short drivers/usb/renesas_usbhs/common.c:166:25: warning: incorrect type in assignment (different base types) drivers/usb/renesas_usbhs/common.c:166:25: expected restricted __le16 [usertype] wIndex drivers/usb/renesas_usbhs/common.c:166:25: got unsigned short drivers/usb/renesas_usbhs/common.c:167:25: warning: incorrect type in assignment (different base types) drivers/usb/renesas_usbhs/common.c:167:25: expected restricted __le16 [usertype] wLength drivers/usb/renesas_usbhs/common.c:167:25: got unsigned short drivers/usb/renesas_usbhs/common.c:173:39: warning: incorrect type in argument 3 (different base types) drivers/usb/renesas_usbhs/common.c:173:39: expected unsigned short [usertype] data drivers/usb/renesas_usbhs/common.c:173:39: got restricted __le16 [usertype] wValue drivers/usb/renesas_usbhs/common.c:174:39: warning: incorrect type in argument 3 (different base types) drivers/usb/renesas_usbhs/common.c:174:39: expected unsigned short [usertype] data drivers/usb/renesas_usbhs/common.c:174:39: got restricted __le16 [usertype] wIndex drivers/usb/renesas_usbhs/common.c:175:39: warning: incorrect type in argument 3 (different base types) drivers/usb/renesas_usbhs/common.c:175:39: expected unsigned short [usertype] data Note. I belive this to be correct, and should be a no-op on arm. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: cdns3: include host-export,h for cdns3_host_initBen Dooks (Codethink)2-1/+1
The cdns3_host_init() function is declared in host-export.h but host.c does not include it. Add the include to have the declaration present (and remove the declaration of cdns3_host_exit which is now static). Fixes the following sparse warning: drivers/usb/cdns3/host.c:58:5: warning: symbol 'cdns3_host_init' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: mtu3: fix missing include of mtu3_dr.hBen Dooks (Codethink)1-0/+1
The declarations of ssusb_gadget_{init,exit} are in the mtu3_dr.h file but the code does that implements them does not include this. Add the include to fix the following sparse warnigns: drivers/usb/mtu3/mtu3_core.c:825:5: warning: symbol 'ssusb_gadget_init' was not declared. Should it be static? drivers/usb/mtu3/mtu3_core.c:925:6: warning: symbol 'ssusb_gadget_exit' was not declared. Should it be static? Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: fsl: Check memory resource before releasing itNikhil Badola1-1/+1
Check memory resource existence before releasing it to avoid NULL pointer dereference Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-27usb: dwc3: select CONFIG_REGMAP_MMIOArnd Bergmann1-0/+1
After many randconfig builds, one configuration caused a link error with dwc3-meson-g12a lacking the regmap-mmio code: drivers/usb/dwc3/dwc3-meson-g12a.o: In function `dwc3_meson_g12a_probe': dwc3-meson-g12a.c:(.text+0x9f): undefined reference to `__devm_regmap_init_mmio_clk' Add the select statement that we have for all other users of that dependency. Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-18usb: cdns3: Error out if USB_DR_MODE_UNKNOWN in cdns3_core_init_role()Roger Quadros1-1/+3
USB_DR_MODE_UNKNOWN should be treated as error as it is done in cdns3_drd_update_mode(). Fixes: 02ffc26df96b ("usb: cdns3: fix cdns3_core_init_role()") Signed-off-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20191017075801.8734-1-rogerq@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-18USB: ldusb: fix read info leaksJohan Hovold1-7/+11
Fix broken read implementation, which could be used to trigger slab info leaks. The driver failed to check if the custom ring buffer was still empty when waking up after having waited for more data. This would happen on every interrupt-in completion, even if no data had been added to the ring buffer (e.g. on disconnect events). Due to missing sanity checks and uninitialised (kmalloced) ring-buffer entries, this meant that huge slab info leaks could easily be triggered. Note that the empty-buffer check after wakeup is enough to fix the info leak on disconnect, but let's clear the buffer on allocation and add a sanity check to read() to prevent further leaks. Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+6fe95b826644f7f12b0b@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191018151955.25135-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-18Merge tag 'usb-serial-5.4-rc4' of ↵Greg Kroah-Hartman1-8/+4
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.4-rc4 Here's a fix for a long-standing locking bug in ti_usb_3410_5052 and related clean up. Both have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.4-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ti_usb_3410_5052: clean up serial data access USB: serial: ti_usb_3410_5052: fix port-close races
2019-10-16USB: serial: ti_usb_3410_5052: clean up serial data accessJohan Hovold1-2/+2
Use the tdev pointer directly instead of going through the port data when accessing the serial data in close(). Signed-off-by: Johan Hovold <johan@kernel.org>
2019-10-16USB: serial: ti_usb_3410_5052: fix port-close racesJohan Hovold1-7/+3
Fix races between closing a port and opening or closing another port on the same device which could lead to a failure to start or stop the shared interrupt URB. The latter could potentially cause a use-after-free or worse in the completion handler on driver unbind. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-10-15USB: usblp: fix use-after-free on disconnectJohan Hovold1-1/+3
A recent commit addressing a runtime PM use-count regression, introduced a use-after-free by not making sure we held a reference to the struct usb_interface for the lifetime of the driver data. Fixes: 9a31535859bf ("USB: usblp: fix runtime PM after driver unbind") Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+cd24df4d075c319ebfc5@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191015175522.18490-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-15usb: udc: lpc32xx: fix bad bit shift operationGustavo A. R. Silva1-3/+3
It seems that the right variable to use in this case is *i*, instead of *n*, otherwise there is an undefined behavior when right shifiting by more than 31 bits when multiplying n by 8; notice that *n* can take values equal or greater than 4 (4, 8, 16, ...). Also, notice that under the current conditions (bl = 3), we are skiping the handling of bytes 3, 7, 31... So, fix this by updating this logic and limit *bl* up to 4 instead of up to 3. This fix is based on function udc_stuff_fifo(). Addresses-Coverity-ID: 1454834 ("Bad bit shift operation") Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20191014191830.GA10721@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-15usb: cdns3: Fix dequeue implementation.Pawel Laszczak1-15/+20
Dequeuing implementation in cdns3_gadget_ep_dequeue gets first request from deferred_req_list and changed TRB associated with it to LINK TRB. This approach is incorrect because deferred_req_list contains requests that have not been placed on hardware RING. In this case driver should just giveback this request to gadget driver. The patch implements new approach that first checks where dequeuing request is located and only when it's on Transfer Ring then changes TRB associated with it to LINK TRB. During processing completed transfers such LINK TRB will be ignored. Reported-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1570958420-22196-1-git-send-email-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-15USB: legousbtower: fix a signedness bug in tower_probe()Dan Carpenter1-1/+1
The problem is that sizeof() is unsigned long so negative error codes are type promoted to high positive values and the condition becomes false. Fixes: 1d427be4a39d ("USB: legousbtower: fix slab info leak at probe") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191011141115.GA4521@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-15USB: legousbtower: fix memleak on disconnectJohan Hovold1-4/+1
If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191010125835.27031-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-15USB: ldusb: fix memleak on disconnectJohan Hovold1-4/+1
If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data. Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191010125835.27031-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10USB: yurex: fix NULL-derefs on disconnectJohan Hovold1-4/+7
The driver was using its struct usb_interface pointer as an inverted disconnected flag, but was setting it to NULL without making sure all code paths that used it were done with it. Before commit ef61eb43ada6 ("USB: yurex: Fix protection fault after device removal") this included the interrupt-in completion handler, but there are further accesses in dev_err and dev_dbg statements in yurex_write() and the driver-data destructor (sic!). Fix this by unconditionally stopping also the control URB at disconnect and by using a dedicated disconnected flag. Note that we need to take a reference to the struct usb_interface to avoid a use-after-free in the destructor whenever the device was disconnected while the character device was still open. Fixes: aadd6472d904 ("USB: yurex.c: remove dbg() usage") Fixes: 45714104b9e8 ("USB: yurex.c: remove err() usage") Cc: stable <stable@vger.kernel.org> # 3.5: ef61eb43ada6 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10USB: iowarrior: use pr_err()Johan Hovold1-1/+1
Replace the one remaining printk with pr_err(). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-7-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10USB: iowarrior: drop redundant iowarrior mutexJohan Hovold1-12/+1
Drop the redundant iowarrior mutex introduced by commit 925ce689bb31 ("USB: autoconvert trivial BKL users to private mutex") which replaced an earlier BKL use. The lock serialised calls to open() against other open() and ioctl(), but neither is needed. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10USB: iowarrior: drop redundant disconnect mutexJohan Hovold1-15/+2
Drop the redundant disconnect mutex which was introduced after the open-disconnect race had been addressed generally in USB core by commit d4ead16f50f9 ("USB: prevent char device open/deregister race"). Specifically, the rw-semaphore in core guarantees that all calls to open() will have completed and that no new calls to open() will occur after usb_deregister_dev() returns. Hence there is no need use the driver data as an inverted disconnected flag. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10USB: iowarrior: fix use-after-free after driver unbindJohan Hovold1-0/+6
Make sure to stop also the asynchronous write URBs on disconnect() to avoid use-after-free in the completion handler after driver unbind. Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21: 51a2f077c44e ("USB: introduce usb_anchor") Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10USB: iowarrior: fix use-after-free on releaseJohan Hovold1-1/+2
The driver was accessing its struct usb_interface from its release() callback without holding a reference. This would lead to a use-after-free whenever debugging was enabled and the device was disconnected while its character device was open. Fixes: 549e83500b80 ("USB: iowarrior: Convert local dbg macro to dev_dbg") Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10USB: iowarrior: fix use-after-free on disconnectJohan Hovold1-4/+3
A recent fix addressing a deadlock on disconnect introduced a new bug by moving the present flag out of the critical section protected by the driver-data mutex. This could lead to a racing release() freeing the driver data before disconnect() is done with it. Due to insufficient locking a related use-after-free could be triggered also before the above mentioned commit. Specifically, the driver needs to hold the driver-data mutex also while checking the opened flag at disconnect(). Fixes: c468a8aa790e ("usb: iowarrior: fix deadlock on disconnect") Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21 Reported-by: syzbot+0761012cebf7bdb38137@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10USB: chaoskey: fix use-after-free on releaseJohan Hovold1-2/+3
The driver was accessing its struct usb_interface in its release() callback without holding a reference. This would lead to a use-after-free whenever the device was disconnected while the character device was still open. Fixes: 66e3e591891d ("usb: Add driver for Altus Metrum ChaosKey device (v2)") Cc: stable <stable@vger.kernel.org> # 4.1 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10USB: adutux: fix use-after-free on releaseJohan Hovold1-1/+2
The driver was accessing its struct usb_device in its release() callback without holding a reference. This would lead to a use-after-free whenever the device was disconnected while the character device was still open. Fixes: 66d4bc30d128 ("USB: adutux: remove custom debug macro") Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 03:43:10 +0000