summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2008-04-15USB: remove broken usb-serial num_endpoints checkGreg Kroah-Hartman1-0/+2
The num_interrupt_in, num_bulk_in, and other checks in the usb-serial code are just wrong, there are too many different devices out there with different numbers of endpoints. We need to just be sticking with the device ids instead of trying to catch this kind of thing. It broke too many different devices. This fixes a large number of usb-serial devices to get them working properly again. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15USB: option: Add new vendor ID and device ID for AMOI HSDPA modemtang kai1-0/+10
This patch add new vendor ID and device ID for AMOI HSDPA modem. From: tang kai <tangk73@hotmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15USB: support more Huawei data card product IDsfangxiaozhi2-4/+124
- declare the unusal device for Huawei data card devices in unusual_devs.h - disable the product ID matching for Huawei data card devices in usb_match_device function of driver.c - declare the product IDs in option.c. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15USB: option.c: add more device IDsMatthias Urlichs1-2/+9
Add devices by AMOI and NovatelWireless. Signed-Off-By: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driverJames Cameron1-0/+3
The modem was detected, the ttyUSB{0,1,2} appeared, a call could be made, and the expected data rate was achieved. Tested for an hour or two, total of 100Mb. I shall do more testing. Signed-off-by: James Cameron <quozl@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-11usb host: fix platform driver hotplug/coldplugKay Sievers16-6/+30
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable USB HCDs, to allow re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11usb gadget: fix platform driver hotplug/coldplugKay Sievers8-2/+11
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable usb peripheral drivers, to re-eable module auto loading. [dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02USB: ohci: fix 2 timers to fire at jiffies + 1sRichard Kennedy2-2/+2
Code inspection discovered in 2 places timers were being incorrectly setup using round_jiffies_relative(HZ). The timer would then fire at time (0 <= T < HZ). Fix them to use round_jiffies(jiffies + HZ); Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: Allow initialization of broken keyspan serial adapters.Clark Rawlins1-0/+4
Fixes the keyspan driver after the addition of additional checking of driver requirements introduced in usb-serial.c commit 063a2da8f01806906f7d7b1a1424b9afddebc443. The initialization of the keyspan usb_serial_driver structs were not initializing the num_interrupt_out field and the additional checking was rejecting the end point so the driver wouldn't finish initializing. This commit initializes the fields to NUM_DONT_CARE. It works for the keyspan USA-49WG and doesn't break the USA-19HS which are the two keyspan devices I have to test with. Signed-off-by: Clark Rawlins <clark.rawlins@escient.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: fix bug in sg initialization in usbtestAlan Stern1-1/+2
This patch (as1062) fixes a bug in the scatter-gather initialization code in the usbtest driver. When the sg-helper conversion was performed, it wasn't done correctly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: serial: fix regression in Visor/Palm OS module for kernels >= 2.6.24Brad Sawatzky1-1/+1
Fixes a bug/inconsistency revealed by the additional sanity checking in commit 063a2da8f01806906f7d7b1a1424b9afddebc443 introduced in the original 2.6.24 branch. The Handspring Visor / PalmOS 4 device structure defines .num_bulk_out=2 but the usb-serial probe returns num_bulk_out=3, triggering the check in the above commit and forcing a bail out when the device (a Garmin iQue in my case) attempts to connect. The patch bumps the expected number of endpoints to 3. FWIW, this patch will probably solve the following kernel bug report for Treo users (identical symptoms, different model PalmOS units): <http://bugzilla.kernel.org/show_bug.cgi?id=10118> Signed-off-by: Brad Sawatzky <brad+kernel@swatter.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: cp2101: Add identifiers for the Telegesys ETRX2USBFlorian Fainelli1-0/+1
This patch adds support for the Telegesys ETRX2USB which works fine with the cp2101 driver. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Tested-by: Xavier Carcelle <xavier.carcelle@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: serial: ti_usb_3410_5052: Correct TUSB3410 endpoint requirements.Robert Spanton1-2/+2
The changes introduced in commit 063a2da8f01806906f7d7b1a1424b9afddebc443 changed the semantics of the num_interrupt_in, num_interrupt_out, num_bulk_in and num_bulk_out entries of the usb_serial_driver struct to be the number of endpoints the device has when probed. This patch changes the ti_1port_device usb_serial_driver struct to reflect this change. The single port devices only have 1 bulk_out endpoint in their initial configuration, and so this patch changes the number of other types to NUM_DONT_CARE. The same change probably needs doing to the ti_2port_device struct, but I don't have a two port device at hand. Signed-off-by: Robert Spanton <rspanton@zepler.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: another ehci_iaa_watchdog fixDavid Brownell1-2/+3
This patch, suggested by Alan Stern, fixes the hung USB issues on my notebook from suspend/resume cycles. It does so by eliminating some confusion about the internal state machine associated with unlinking from the EHCI async schedule ring, which caused a recent regression: http://bugzilla.kernel.org/show_bug.cgi?id=10345 Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: ehci: stop vt6212 bus hoggingRene Herman1-0/+14
The VIA VT6212 defaults to only waiting 1us between passes over EHCI's async ring, which hammers PCI badly ... and by preventing other devices from accessing the bus, causes problems like drops in IDE throughput, a problem that's been bugging users of those chips for several years. A (partial) datasheet for this chip eventually turned up, letting us see how to make it use a VIA-specific register to switch over to the the normal 10us value instead, as suggested by the EHCI specification Solution noted by Lev A. Melnikovsky. It's not clear whether this register exists on other VIA chips; we know that it's ineffective on the vt8235. So this patch only applies to chips that seem to be incarnations of the (discrete) vt6212. Signed-off-by: Rene Herman <rene.herman@gmail.com> Tested-by: Lev A. Melnikovsky <melnikovsky@mail.ru> Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: sierra: add another device idKevin Lloyd1-0/+1
Add support for the MC8775 device to the sierra driver. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: sierra: dma fixesOliver Neukum1-4/+13
while I was adding autosuspend to that driver I noticed a few issues. You were having DMAed buffers as a part of a structure. This will fail on platforms that are not DMA-coherent (arm, sparc, ppc, ...) Please test this patch to fix it. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: add support for Motorola ROKR Z6 cellphone in mass storage modeConstantin Baranov2-1/+13
Motorola ROKR Z6 cellphone has bugs in its USB, so it is impossible to use it as mass storage. Patch describes new "unusual" USB device for it with FIX_INQUIRY and FIX_CAPACITY flags and new BULK_IGNORE_TAG flag. Last flag relaxes check for equality of bcs->Tag and us->tag in usb_stor_Bulk_transport routine. Signed-off-by: Constantin Baranov <const@tltsu.ru> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Daniel Drake <dsd@gentoo.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: isd200: fix memory leak in isd200_get_inquiry_dataBoaz Harrosh1-0/+1
If the inquiry fails then the info structure on us->extra was not freed. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: pl2303: another product IDMax Arnold2-0/+2
Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm contains Prolific 2303 chip. Actually their site a bit outdated - I have AlDiga AL-11U GSM/GPRS/EDGE modem and it works with pl2303 module after adding corresponding product ID. By default modem uses baud rate 460800. GSM chipset - SIMCom SIM600, quad band 850/900/1800/1900 MHz Device info: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=067b ProdID=0611 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303 E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Max Arnold <lwarxx@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: new quirk flag to avoid Set-InterfaceAlan Stern2-1/+7
This patch (as1057) fixes a problem with the X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter; the device crashes when it receives a Set-Interface request. A new quirk (USB_QUIRK_NO_SET_INTF) is introduced and a quirks entry is created for this device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: fix gadgetfs class request delegationRoy Hashimoto1-2/+2
gadgetfs (drivers/usb/gadget/inode.c) was not delegating all non-device requests to userspace. This patch makes the handling of all request cases consistent. Signed-off-by: Roy Hashimoto <hashimot@alumni.caltech.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds1-1/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] a100u2w: fix bitmap lookup routine [SCSI] fix media change events for polled devices [SCSI] sd, sr: do not emit change event at device add [SCSI] mpt fusion: Power Management fixes for MPT SAS PCI-E controllers [SCSI] gdth: Allocate sense_buffer to prevent NULL pointer dereference [SCSI] arcmsr: fix iounmap error for Type B adapter [SCSI] isd200: Allocate sense_buffer for hacked up scsi_cmnd [SCSI] fix bsg queue oops with iscsi logout [SCSI] Fix dependency problems in SCSI drivers [SCSI] advansys: Fix bug in AdvLoadMicrocode
2008-03-13[SCSI] isd200: Allocate sense_buffer for hacked up scsi_cmndBoaz Harrosh1-1/+4
Since the separation of sense_buffer from scsi_cmnd, Drivers that hack their own struct scsi_cmnd like here isd200, must also take care of their own sense_buffer. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-10USB: fix ehci unlink regressionsDavid Brownell1-16/+46
The recent EHCI driver update to split the IAA watchdog timer out from the other timers made several things work better, but not everything; and it created a couple new issues in bugzilla. Ergo this patch: - Handle a should-be-rare SMP race between the watchdog firing and (very late) IAA interrupts; - Remove a shouldn't-have-been-added WARN_ON() test; - Guard against one observed OOPS; - If this watchdog fires during clean HC shutdown, it should act as a NOP instead of interfering with the shutdown sequence; - Guard against silicon errata hypothesized by some vendors: * IAA status latch broken, but IAAD cleared OK; * IAAD wasn't cleared when IAA status got reported; The WARN_ON is in bugzilla as 10168; the OOPS as 10078; these are both regressions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: new ftdi_sio device idMirko Bordignon2-0/+4
Here is a patch that adds support for the propox jtagcable II dongle (http://www.propox.com/products/t_117.html): their PID was missing, therefore we were not able to have the device recognized though it uses a standard FTDI chip. Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: fsl_usb2_udc: fix broken KconfigLi Yang1-1/+1
The patch fixes broken Kconfig caused by the name change of MPC834x option. It also makes fsl_usb2_udc selectable on new platforms like MPC837x. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: option: add novatel device idsDirk DeSchepper1-13/+62
This updates the option driver with a lot more novatel driver ids. From: Dirk DeSchepper <ddeschepper@nvtl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: cypress_m8: add UPS Powercom (0d9f:0002)Dmitry Shapin2-0/+6
Add support for UPS Powercom USB interface (0d9f:0002) in chip CY7C63723. In my case, this Powercom BNT800AP. Signed-off-by: Dmitry Shapin <shapin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: drivers/usb/storage/sddr55.c: fix uninitialized var warningsAndrew Morton1-2/+2
drivers/usb/storage/sddr55.c: In function 'sddr55_transport': drivers/usb/storage/sddr55.c:526: warning: 'deviceID' may be used uninitialized in this function drivers/usb/storage/sddr55.c:525: warning: 'manufacturerID' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: fix usb-serial generic recursive lockPete Zaitcev1-4/+6
Nobody should be using the generic usb-serial for anything other than testing. Still, it's not a good thing that it's easy to lock up. There is a traceback from NMI oopser here: https://bugzilla.redhat.com/show_bug.cgi?id=431379 But in short, if a line discipline has a chance to echo anything, input can loop back a write method. So, don't call tty_flip_buffer_push from under a lock taken on write path. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: debugfs: fix sparse warnings Driver core: Fix cleanup when failing device_add(). driver core: Remove dpm_sysfs_remove() from error path of device_add() PM: fix new mutex-locking bug in the PM core PM: Do not acquire device semaphores upfront during suspend kobject: properly initialize ksets sysfs: CONFIG_SYSFS_DEPRECATED fix driver core: fix up Kconfig text for CONFIG_SYSFS_DEPRECATED
2008-03-04USB: ftdi_sio - really enable EM1010PCSven Andersen1-0/+1
Add EM1010PC to ftdi_sio.c Signed-off-by: Sven Andersen <s.andersen@cryonet.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: remove incorrect struct class_device from the printer gadgetTony Jones1-1/+0
This field does nothing, and should not be allowed to stick around incase someone gets any other ideas... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: pxa2xx_udc: fix misuse of clock enable/disable callsDmitry Baryshkov2-39/+53
Fix pxa2xx_udc to balance calls to clk_enable/clk_disable. [db: remove inline #ifdefs for IXP non-support of <linux/clk.h> calls] Signed-off-by: Dmitry Baryshkov dbaryshkov@gmail.com Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: ftdi_sio: Workaround for broken Matrix Orbital serial portKevin Vance2-0/+31
Workaround for the FT232RL-based, Matrix Orbital VK204-25-USB serial port added to the ftdi_sio driver. The device has an invalid endpoint descriptor, which must be modified before it can be used. Signed-off-by: Kevin Vance <kvance@kvance.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: Add support for AXESSTEL MV110H CDMA modemDaniel Kozák1-0/+4
Add entry for Axesstel MV110H CDMA modem (ID: 1726:1000) to option driver Signed-off-by: Daniel Kozák <kozzi11@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04usb-storage: update earlier scatter-gather bug fixAlan Stern1-1/+1
This patch (as1037) makes a small update to the earlier as1035 patch. The minimum-length computation shouldn't be done in usb_stor_access_xfer_buf(), since that routine can be called multiple times for a single transfer. It should be done in usb_stor_set_xfer_buf() instead, which gets called only once. The way it is now isn't really _wrong_, but it isn't really _right_ either. Moving the statement will be an improvement. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: isp116x: fix enumeration on bootAnti Sullin2-10/+6
This patch removes the buffering of the status register. USB core behavior has changed a bit and this buffering was not refreshed at the right time. The core got buffered old value of HCRHPORT and it did not detect any devices on boot. Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Acked by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: ehci: handle large bulk URBs correctly (again)Misha Zhilin1-1/+1
USB: ehci: Fixes completion for multi-qtd URB the short read case When use of urb->status in the EHCI driver was reworked last August (commit 14c04c0f88f228fee1f412be91d6edcb935c78aa), a bug was inserted in the handling of early completion for bulk transactions that need more than one qTD (e.g. more than 20KB in one URB). This patch resolves that problem by ensuring that the early completion status is preserved until the URB is handed back to its submitter, instead of resetting it after each qTD. Signed-off-by: Misha Zhilin <misha@epiphan.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: spruce up the device blacklistAlan Stern1-9/+12
This patch (as1040) fixes up the blacklist of USB device quirks. A couple of lines are broken to comply with the 80-column rule, and entries are sorted into the proper numerical order. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: update Kconfig entry for USB_SUSPENDAlan Stern1-4/+5
This patch (as1039) updates the Kconfig entry for USB_SUSPEND. The out-of-date reference to "power/state" is fixed, autosuspend is mentioned, and the dependency on EXPERIMENTAL is removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04usb: Add support for the mos7820/7840-based B&B USB/RS485 converter to mos7840.cDavid Ludlow1-1/+14
Add support for the mos7820/7840-based B&B USOPTL4_2/USOPTL4_4 USB/RS485 converter to mos7840.c Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04PM: Do not acquire device semaphores upfront during suspendRafael J. Wysocki1-1/+1
Remove the code that acquires all device semaphores from the suspend code path as it causes multiple problems to appear (most notably, http://bugzilla.kernel.org/show_bug.cgi?id=10030) and revert the change introduced by commit 4145ed6dc597a9bea5f6ae8c574653b2de10620f depending on the code being removed. Remove pm_sleep_lock()/pm_sleep_unlock() from device_add() to avoid the issue reported at http://bugzilla.kernel.org/show_bug.cgi?id=9874. It should fix the regreesions reported at: http://bugzilla.kernel.org/show_bug.cgi?id=9874 http://bugzilla.kernel.org/show_bug.cgi?id=10030 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-03docbook: fix usb source filesRandy Dunlap1-4/+2
Fix docbook problems in USB source files. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23Fix u132-hcd.c compile errorMirco Tischler1-2/+2
This fixes the following compile error caused by commit 3a2d5b700132f35401f1d9e22fe3c2cab02c2549 ("PM: Introduce PM_EVENT_HIBERNATE callback state") CC [M] drivers/usb/host/u132-hcd.o drivers/usb/host/u132-hcd.c: In function ‘u132_suspend’: drivers/usb/host/u132-hcd.c:3224: error: expected expression before ‘int’ drivers/usb/host/u132-hcd.c:3225: error: ‘ports’ undeclared (first use in this function) ... Signed-off-by: Mirco Tischler <mt-ml@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki2-3/+9
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-21ehci-fsl: add PPC_MPC837x to default yAnton Vorontsov1-3/+2
This patch converts USB_EHCI_FSL config option into the verbose bool, so we'll able to select it for other freescale processors with built-in EHCI controller. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: POWERPC: ehci: fix ppc buildAnton Vorontsov1-1/+1
Currently, this setup: CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PPC_OF=y Will fail to build: CC drivers/usb/host/ehci-hcd.o drivers/usb/host/ehci-hcd.c:1018:2: error: #error "missing bus glue for ehci-hcd" make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1 ehci-hcd.c actually contains OF_PLATFORM_DRIVER glue, so error is bogus. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: usb-storage: don't access beyond the end of the sg bufferAlan Stern1-12/+15
This patch (as1035) fixes a bug in usb_stor_access_xfer_buf() (the bug was originally found by Boaz Harrosh): The routine must not attempt to write beyond the end of a scatter-gather list or beyond the number of bytes requested. It also fixes up the formatting of a few comments and similar whitespace issues. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 09:42:46 +0000