summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
AgeCommit message (Collapse)AuthorFilesLines
2018-12-21Merge USB 4.20-rc8 mergepoint into usb-nextGreg Kroah-Hartman1-1/+15
We need the USB changes in here for additional patches to be able to apply cleanly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21Merge tag 'usb-serial-4.21-rc1' of ↵Greg Kroah-Hartman6-55/+55
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 4.21-rc1 Here are the USB-serial updates for 4.21-rc1, including: - support for mos7840 3-port devices - improved ftdi baud-rate divisor calculations - support for a new class of f81534 devices Included are also various clean ups and some new pl2303 device ids. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-4.21-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays USB: serial: mos7840: remove set but not used variables 'number, serial' USB: serial: mos7840: add a product ID for the new product USB: serial: mos7840: clean up register handling USB: serial: ftdi_sio: use rounding when calculating baud rate divisors USB: serial: f81534: fix reading old/new IC config USB: serial: mos7840: remove set but not used variables 'st, data1, iflag' USB: serial: quatech2: remove set but not used variable 'port_priv'
2018-12-18USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displaysScott Chen2-0/+10
Add device ids to pl2303 for the HP POS pole displays: LM920: 03f0:026b TD620: 03f0:0956 LD960TA: 03f0:4439 LD220TA: 03f0:4349 LM940: 03f0:5039 Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-13USB: serial: option: add Telit LN940 seriesJörgen Storvist1-0/+4
Added USB serial option driver support for Telit LN940 series cellular modules. Covering both QMI and MBIM modes. usb-devices output (0x1900): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1900 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option usb-devices output (0x1901): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1901 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-13USB: serial: option: add Fibocom NL668 seriesJörgen Storvist1-0/+2
Added USB serial option driver support for Fibocom NL668 series cellular modules. Reserved USB endpoints 4, 5 and 6 for network + ADB interfaces. usb-devices output (QMI mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) usb-devices output (ECM mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-12USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)Jörgen Storvist1-0/+1
Added USB serial option driver support for Simcom SIM7500/SIM7600 series cellular modules exposing MBIM interface (VID 0x1e0e,PID 0x9003) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9003 Rev=03.18 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-12USB: serial: option: add GosunCn ZTE WeLink ME3630Jörgen Storvist1-0/+2
Added USB serial option driver support for GosunCn ZTE WeLink ME3630 series cellular modules for USB modes ECM/NCM and MBIM. usb-devices output MBIM mode: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0602 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim usb-devices output ECM/NCM mode: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1476 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-10USB: serial: mos7840: remove set but not used variables 'number, serial'YueHaibing1-6/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/serial/mos7840.c: In function 'mos7840_send_cmd_write_baud_rate': drivers/usb/serial/mos7840.c:1584:16: warning: variable 'number' set but not used [-Wunused-but-set-variable] drivers/usb/serial/mos7840.c: In function 'mos7840_change_port_settings': drivers/usb/serial/mos7840.c:1695:21: warning: variable 'serial' set but not used [-Wunused-but-set-variable] 'number' never used since introduction in commit 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") 'serial' not used since commit 5833041f1b13 ("USB: serial: remove unnecessary reinitialisations of urb->dev") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-10USB: serial: option: add HP lt4132Tore Anderson1-1/+6
The HP lt4132 is a rebranded Huawei ME906s-158 LTE modem. The interface with protocol 0x16 is "CDC ECM & NCM" according to the *.inf files included with the Windows driver. Attaching the option driver to it doesn't result in a /dev/ttyUSB* device being created, so I've excluded it. Note that it is also excluded for corresponding Huawei-branded devices, cf. commit d544db293a44 ("USB: support new huawei devices in option.c"). T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=06 Prot=16 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option I: If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 3 Cfg#= 3 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option Signed-off-by: Tore Anderson <tore@fud.no> Cc: stable@vger.kernel.org [ johan: drop id defines ] Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-05USB: serial: console: fix reported terminal settingsJohan Hovold1-1/+1
The USB-serial console implementation has never reported the actual terminal settings used. Despite storing the corresponding cflags in its struct console, these were never honoured on later tty open() where the tty termios would be left initialised to the driver defaults. Unlike the serial console implementation, the USB-serial code calls subdriver open() already at console setup. While calling set_termios() and write() before open() looks like it could work for some USB-serial drivers, others definitely do not expect this, so modelling this after serial core is going to be intrusive, if at all possible. Instead, use a (renamed) tty helper to save the termios data used at console setup so that the tty termios reflects the actual terminal settings after a subsequent tty open(). Note that the calls to tty_init_termios() (tty_driver_install()) and tty_save_termios() are serialised using the disconnect mutex. This specifically fixes a regression that was triggered by a recent change adding software flow control to the pl2303 driver: a getty trying to disable flow control while leaving the baud rate unchanged would now also set the baud rate to the driver default (prior to the flow-control change this had been a noop). Fixes: 7041d9c3f01b ("USB: serial: pl2303: add support for tx xon/xoff flow control") Cc: stable <stable@vger.kernel.org> # 4.18 Cc: Florian Zumbiehl <florz@florz.de> Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-05USB: serial: mos7840: add a product ID for the new productJackyChou1-2/+8
Add a new PID 0x7843 to the driver. Let the new products be able to set up 3 serial ports with the driver. Note that this depends on e8603076f540 ("USB: serial: mos7840: clean up register handling"). Signed-off-by: JackyChou <jackychou@asix.com.tw> [ johan: mention dependency in case anyone wants to backport this ] Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-05USB: serial: mos7840: clean up register handlingJackyChou1-32/+16
In the read/write function, set port 2 independently in the 2-port case. When setting the offset of port registers, the offset between port 1 and other ports is different, so port 1 is set independently. Then in the rest of ports, the port 2 between 2-ports case and 4-ports case is different, so port 2 in 2-ports case is set independently. Specifically, port 2 in the 2-port case maps to the registers used by port 3 in the 4-port case. Signed-off-by: JackyChou <jackychou@asix.com.tw> [ johan: simplify register-offset handling at port probe, add a comment and amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2018-11-23USB: serial: ftdi_sio: use rounding when calculating baud rate divisorsNikolaj Fogh1-3/+3
Improve baud-rate generation by using rounding-to-closest instead of truncation in divisor calculation. Results have been verified by logic analyzer on an FT232RT (232BM) chip. The following table shows the wanted baud rate, the baud rate obtained with the old method (truncation), with the new method (rounding) and the baud rate generated by the windows 10 driver. The numbers in parentheses is the error. +- Wanted --+------ Old -------+------ New -------+------ Win -------+ |   9600  |   9600 (0.00%)  |   9604 (0.05%)  |   9605 (0.05%)  | |   19200   |   19200 (0.00%)  |   19199 (0.01%)  |   19198 (0.01%)  | |   38400   |   38395 (0.01%)  |   38431 (0.08%)  |   38394 (0.02%)  | |   57600   |   57725 (0.22%)  |   57540 (0.10%)  |   57673 (0.13%)  | |  115200   |  115307 (0.09%)  |  115330 (0.11%)  |  115320 (0.10%)  | |  921600   |  919963 (0.18%)  |  920386 (0.13%)  |  920810 (0.09%)  | |  961200   |  996512 (3.67%)  |  956480 (0.49%)  |  956937 (0.44%)  | +-----------+------------------+------------------+------------------+ The error due to noise in the measurements is in the order of a few tenths of a %. As can be seen, the baud rate is significantly improved for some rates (e.g. 961200), and corresponds to the output given by the windows driver. The theoretical baud rate has been calculated for all baud rates from 1 to 3M, and as expected, the error is centered around 0, with a triangle shape instead of a sawtooth, so the maximum error is decreased to half. Signed-off-by: Nikolaj Fogh <nikolajfogh@gmail.com> [ johan: edit commit message slightly ] Signed-off-by: Johan Hovold <johan@kernel.org>
2018-11-20USB: serial: f81534: fix reading old/new IC configJi-Ze Hong (Peter Hong)1-3/+17
The F81532/534 had a internal configuration space to save & control IC state with address F81534_CUSTOM_ADDRESS_START (0x2f00). Layout as following: +00h: to indicate the section is valid +01h~04h: UART Mode & port availability +05h~08h: Output pin control on IC power on +09h~12h: Output pin control on working <-- New added Old driver will use +05~08h as default on working, but newer IC will configed with shutdown mode(7) in 05h~08h and working mode with RS232(1) in 09h~12h. It'll make mainstream driver not working. This patch will make mainstream driver compatible older and newer IC. If using a old IC, the +05h~08h will be 00h~06h, we'll direct apply it. If using a new IC, the +05h~08h will be 07h or larger, we'll read +09h~12h to apply newer configuration. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-11-12USB: serial: mos7840: remove set but not used variables 'st, data1, iflag'YueHaibing1-6/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/serial/mos7840.c: In function 'mos7840_interrupt_callback': drivers/usb/serial/mos7840.c:604:14: warning: variable 'st' set but not used [-Wunused-but-set-variable] drivers/usb/serial/mos7840.c: In function 'mos7840_write': drivers/usb/serial/mos7840.c:1303:17: warning: variable 'data1' set but not used [-Wunused-but-set-variable] drivers/usb/serial/mos7840.c:1700:11: warning: variable 'iflag' set but not used [-Wunused-but-set-variable] They are never used since introduction in commit 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-11-12USB: serial: quatech2: remove set but not used variable 'port_priv'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/serial/quatech2.c: In function 'qt2_process_read_urb': drivers/usb/serial/quatech2.c:503:27: warning: variable 'port_priv' set but not used [-Wunused-but-set-variable] It not used any more after commit 2be818a116b2 ('Revert "USB: quatech2: only write to the tty if the port is open."') Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-10-26Merge tag 'usb-4.20-rc1' of ↵Linus Torvalds3-6/+420
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...
2018-10-24Merge branch 'work.tty-ioctl' of ↵Linus Torvalds18-508/+225
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull tty ioctl updates from Al Viro: "This is the compat_ioctl work related to tty ioctls. Quite a bit of dead code taken out, all tty-related stuff gone from fs/compat_ioctl.c. A bunch of compat bugs fixed - some still remain, but all more or less generic tty-related ioctls should be covered (remaining issues are in things like driver-private ioctls in a pcmcia serial card driver not getting properly handled in 32bit processes on 64bit host, etc)" * 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (53 commits) kill TIOCSERGSTRUCT change semantics of ldisc ->compat_ioctl() kill TIOCSER[SG]WILD synclink_gt(): fix compat_ioctl() pty: fix compat ioctls compat_ioctl - kill keyboard ioctl handling gigaset: add ->compat_ioctl() vt_compat_ioctl(): clean up, use compat_ptr() properly gigaset: don't try to printk userland buffer contents dgnc: don't bother with (empty) stub for TCXONC dgnc: leave TIOC[GS]SOFTCAR to ldisc remove fallback to drivers for TIOCGICOUNT dgnc: break-related ioctls won't reach ->ioctl() kill the rest of tty COMPAT_IOCTL() entries dgnc: TIOCM... won't reach ->ioctl() isdn_tty: TCSBRK{,P} won't reach ->ioctl() kill capinc_tty_ioctl() take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl() synclink: reduce pointless checks in ->ioctl() complete ->[sg]et_serial() switchover ...
2018-10-18Merge tag 'usb-serial-4.20-rc1' of ↵Greg Kroah-Hartman3-6/+420
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.20-rc1 Here are the USB-serial updates for 4.20-rc1, including: - support for CBUS GPIO on FTDI devices (FTX and FT232R) - fix of a long-standing transfer-length bug Included are also various clean ups. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-4.20-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cypress_m8: remove set but not used variable 'iflag' USB: serial: cypress_m8: fix interrupt-out transfer length USB: serial: ftdi_sio: add support for FT232R CBUS gpios USB: serial: ftdi_sio: fix gpio name collisions USB: serial: ftdi_sio: implement GPIO support for FT-X devices USB: serial: cypress_m8: fix spelling mistake "retreiving" -> "retrieving"
2018-10-13complete ->[sg]et_serial() switchoverAl Viro1-2/+2
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13usb_wwan: switch to ->[sg]et_serial()Al Viro3-49/+23
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13whiteheat: switch to ->get_serial()Al Viro1-27/+15
... and fix the return value - on success it used to have ioctl(2) fill the user-supplied struct serial_struct and return -ENOTTY. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13ti_usb_3410_5052: switch to ->[sg]et_serial()Al Viro1-50/+24
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13ssu100: switch to ->get_serial()Al Viro1-31/+11
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13quatech2: switch to ->get_serial()Al Viro1-31/+11
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13pl2303: switch to ->get_serial()Al Viro1-21/+8
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13opticon: switch to ->get_serial()Al Viro1-31/+12
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13mos7840: switch to ->get_serial()Al Viro1-26/+13
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13mos7720: switch to ->get_serial()Al Viro1-21/+13
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13io_ti: switch to ->get_serial()Al Viro1-33/+14
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13io_edgeport: switch to ->get_serial()Al Viro1-21/+16
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13fdti_sio: switch to ->[sg]et_serial()Al Viro1-27/+21
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13f81534: switch to ->get_serial()Al Viro1-30/+8
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13f81232: switch to ->get_serial()Al Viro1-28/+8
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13ark3116: switch to ->get_serial()Al Viro1-30/+8
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13usb-serial: begin switching to ->[sg]et_serial()Al Viro1-0/+20
add such methods for usb_serial_driver, provide tty_operations ->[sg]et_serial() calling those. For now the lack of methods in driver means ENOIOCTLCMD from usb-serial ->[sg]et_serial(), making tty_ioctl() fall back to calling ->ioctl(). Once all drivers are converted, we'll be returning -ENOTTY instead, completing the switchover. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-05USB: serial: cypress_m8: remove set but not used variable 'iflag'YueHaibing1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/serial/cypress_m8.c: In function 'cypress_set_termios': drivers/usb/serial/cypress_m8.c:866:18: warning: variable 'iflag' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-10-05USB: serial: cypress_m8: fix interrupt-out transfer lengthJohan Hovold1-1/+1
Fix interrupt-out transfer length which was being set to the transfer-buffer length rather than the size of the outgoing packet. Note that no slab data was leaked as the whole transfer buffer is always cleared before each transfer. Fixes: 9aa8dae7b1fa ("cypress_m8: use usb_fill_int_urb where appropriate") Signed-off-by: Johan Hovold <johan@kernel.org>
2018-10-05USB: serial: ftdi_sio: add support for FT232R CBUS gpiosJohan Hovold2-3/+40
Enable support for cbus gpios on FT232R. The cbus configuration is stored in one word in the EEPROM at offset 0x0a (byte-offset 0x14) with the mux config for CBUS0, CBUS1, CBUS2 and CBUS3 in bits 0..3, 4..7, 8..11 and 12..15, respectively. Tested using FT232RL by configuring one cbus pin at a time. Signed-off-by: Johan Hovold <johan@kernel.org>
2018-10-05USB: serial: ftdi_sio: fix gpio name collisionsJohan Hovold1-5/+0
Drop the gpio line names, which cause gpiolib to complain loudly whenever a second ftdi gpiochip is registered: gpio gpiochip5: Detected name collision for GPIO name 'CBUS0' gpio gpiochip5: Detected name collision for GPIO name 'CBUS1' gpio gpiochip5: Detected name collision for GPIO name 'CBUS2' gpio gpiochip5: Detected name collision for GPIO name 'CBUS3' and also prevents the legacy sysfs interface from being used (as the line names are used as device names whenever they are set): sysfs: cannot create duplicate filename '/class/gpio/CBUS0' Until non-unique names are supported by gpiolib (without warnings and stack dumps), let's leave the gpio lines unnamed. Signed-off-by: Johan Hovold <johan@kernel.org>
2018-09-26USB: serial: ftdi_sio: implement GPIO support for FT-X devicesKaroly Pados2-2/+385
This patch allows using the CBUS pins of FT-X devices as GPIO in CBUS bitbanging mode. There is no conflict between the GPIO and VCP functionality in this mode. Tested on FT230X and FT231X. As there is no way to request the current CBUS register configuration from the device, all CBUS pins are set to a known state when the first GPIO is requested. This allows using libftdi to set the GPIO pins before loading this module for UART functionality, a behavior that existing applications might be relying upon (though no specific case is known to the authors of this patch). Signed-off-by: Karoly Pados <pados@pados.hu> [ johan: minor style changes ] Signed-off-by: Johan Hovold <johan@kernel.org>
2018-09-24USB: serial: simple: add Motorola Tetra MTP6550 idJohan Hovold1-1/+2
Add device-id for the Motorola Tetra radio MTP6550. Bus 001 Device 004: ID 0cad:9012 Motorola CGISS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9012 bcdDevice 24.16 iManufacturer 1 Motorola Solutions, Inc. iProduct 2 TETRA PEI interface iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 Generic Serial config bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Reported-by: Hans Hult <hanshult35@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-09-24USB: serial: cypress_m8: fix spelling mistake "retreiving" -> "retrieving"Colin Ian King1-1/+1
Trivial fix to spelling mistake in dev_dbg message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-09-14mos7720: bury dead TIOCM... in ->ioctl()Al Viro1-52/+0
These ioctls never reach driver's ->ioctl() - tty_ioctl() handles them on its own. ->tiocm[gs]et() is what actually gets called, and mos7720 provides those, with results equivalent to what the unreachable code would be doing when called. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-09-14USB: serial: option: add two-endpoints device-id flagJohan Hovold1-10/+7
Allow matching on interfaces having two endpoints by adding a new device-id flag. This allows for the handling of devices whose interface numbers can change (e.g. Quectel EP06) to be contained in the device-id table. Tested-by: Kristian Evensen <kristian.evensen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-09-14USB: serial: option: improve Quectel EP06 detectionKristian Evensen1-2/+16
The Quectel EP06 (and EM06/EG06) LTE modem supports updating the USB configuration, without the VID/PID or configuration number changing. When the configuration is updated and interfaces are added/removed, the interface numbers are updated. This causes our current code for matching EP06 not to work as intended, as the assumption about reserved interfaces no longer holds. If for example the diagnostic (first) interface is removed, option will (try to) bind to the QMI interface. This patch improves EP06 detection by replacing the current match with two matches, and those matches check class, subclass and protocol as well as VID and PID. The diag interface exports class, subclass and protocol as 0xff. For the other serial interfaces, class is 0xff and subclass and protocol are both 0x0. The modem can export the following devices and always in this order: diag, nmea, at, ppp. qmi and adb. This means that diag can only ever be interface 0, and interface numbers 1-5 should be marked as reserved. The three other serial devices can have interface numbers 0-3, but I have not marked any interfaces as reserved. The reason is that the serial devices are the only interfaces exported by the device where subclass and protocol is 0x0. QMI exports the same class, subclass and protocol values as the diag interface. However, the two interfaces have different number of endpoints, QMI has three and diag two. I have added a check for number of interfaces if VID/PID matches the EP06, and we ignore the device if number of interfaces equals three (and subclass is set). Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> [ johan: drop uneeded RSVD(5) for ADB ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-08-27USB: serial: ti_usb_3410_5052: fix array underflow in completion handlerJohan Hovold1-1/+1
Similarly to a recently reported bug in io_ti, a malicious USB device could set port_number to a negative value and we would underflow the port array in the interrupt completion handler. As these devices only have one or two ports, fix this by making sure we only consider the seventh bit when determining the port number (and ignore bits 0xb0 which are typically set to 0x30). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-08-27USB: serial: io_ti: fix array underflow in completion handlerJohan Hovold1-1/+1
As reported by Dan Carpenter, a malicious USB device could set port_number to a negative value and we would underflow the port array in the interrupt completion handler. As these devices only have one or two ports, fix this by making sure we only consider the seventh bit when determining the port number (and ignore bits 0xb0 which are typically set to 0x30). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-08-02USB: serial: pl2303: add a new device id for ATENMovie Song2-0/+3
Signed-off-by: Movie Song <MovieSong@aten-itlab.cn> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-28USB: option: add support for DW5821eAleksander Morgado1-0/+4
The device exposes AT, NMEA and DIAG ports in both USB configurations. The patch explicitly ignores interfaces 0 and 1, as they're bound to other drivers already; and also interface 6, which is a GNSS interface for which we don't have a driver yet. T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 09:46:40 +0000