summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/ftdi_sio.c
AgeCommit message (Collapse)AuthorFilesLines
2012-03-15USB: ftdi_sio: new PID: LUMEL PD12Michał Wróbel1-0/+1
Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-14USB: ftdi_sio: add support for FT-X series devicesJim Paris1-5/+15
Add PID 0x6015, corresponding to the new series of FT-X chips (FT220XD, FT201X, FT220X, FT221X, FT230X, FT231X, FT240X). They all appear as serial devices, and seem indistinguishable except for the default product string stored in their EEPROM. The baudrate generation matches FT232RL devices. Tested with a FT201X and FT230X at various baudrates (100 - 3000000). Sample dmesg: ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver usb 2-1: new full-speed USB device number 6 using ohci_hcd usb 2-1: New USB device found, idVendor=0403, idProduct=6015 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: FT230X USB Half UART usb 2-1: Manufacturer: FTDI usb 2-1: SerialNumber: DC001WI6 ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: ftdi_sio_port_probe drivers/usb/serial/ftdi_sio.c: ftdi_determine_type: bcdDevice = 0x1000, bNumInterfaces = 1 usb 2-1: Detected FT-X usb 2-1: Number of endpoints 2 usb 2-1: Endpoint 1 MaxPacketSize 64 usb 2-1: Endpoint 2 MaxPacketSize 64 usb 2-1: Setting MaxPacketSize 64 drivers/usb/serial/ftdi_sio.c: read_latency_timer drivers/usb/serial/ftdi_sio.c: write_latency_timer: setting latency timer = 1 drivers/usb/serial/ftdi_sio.c: create_sysfs_attrs drivers/usb/serial/ftdi_sio.c: sysfs attributes for FT-X usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0 Signed-off-by: Jim Paris <jim@jtan.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09USB: ftdi_sio: new PID: Distortec JTAG-lock-pickMichał Wróbel1-0/+2
Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: Microchip VID mislabeled as Hornby VID in ftdi_sio.Bruno Thomsen1-1/+1
Microchip VID (0x04d8) was mislabeled as Hornby VID according to USB-IDs. A Full Speed USB Demo Board PID (0x000a) was mislabeled as Hornby Elite (an Digital Command Controller Console for model railways). Most likely the Hornby based their design on PIC18F87J50 Full Speed USB Demo Board. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-01USB: ftdi_sio: add support for BeagleBone rev A5+Peter Korsgaard1-2/+2
BeagleBone changed to the default FTDI 0403:6010 id in rev A5 to make life easier for Windows users, so we need a similar workaround as the Calao board to support it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-28USB: ftdi_sio: fix problem when the manufacture is a NULL stringGreg Kroah-Hartman1-1/+2
On some misconfigured ftdi_sio devices, if the manufacturer string is NULL, the kernel will oops when the device is plugged in. This patch fixes the problem. Reported-by: Wojciech M Zabolotny <W.Zabolotny@elka.pw.edu.pl> Tested-by: Wojciech M Zabolotny <W.Zabolotny@elka.pw.edu.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24usb-serial: Add support for the Sealevel SeaLINK+8 2038-ROHS deviceScott Dial1-0/+4
This patch adds new device IDs to the ftdi_sio module to support the new Sealevel SeaLINK+8 2038-ROHS device. Signed-off-by: Scott Dial <scott.dial@scientiallc.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24usb-serial: use new registration API in [d-h]* driversAlan Stern1-17/+9
This patch (as1524) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: digi_acceleport, empeg, ftdi_sio, funsoft, garmin_gps, and hp4x. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: usbserial: add new PID number (0xa951) to the ftdi driverMilan Kocian1-0/+1
Signed-off-by: Milan Kocian <milon@wq.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-26USB: ftdi_sio: Add more identifiersAlan Cox1-0/+1
0x04d8, 0x000a: Hornby Elite Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: serial: ftdi additional IDsPeter Naulls1-0/+1
I tested this against 2.6.39 in the Ubuntu kernel, however I see the IDs are not in latest 3.2 git. This adds IDs for the FTDI controller in the Rainforest Automation Zigbee dongle. Signed-off-by: Peter Naulls <peter@chocky.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: ftdi_sio: add PID for TI XDS100v2 / BeagleBone A3Peter Korsgaard1-0/+2
Port A for JTAG, port B for serial. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: ftdi_sio: fix initial baud rateJohan Hovold1-2/+5
Fix regression introduced by commit b1ffb4c851f1 ("USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c") which caused the termios settings to no longer be initialised at open. Consequently it was no longer possible to set the port to the default speed of 9600 baud without first changing to another baud rate and back again. Reported-by: Roland Ramthun <mail@roland-ramthun.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Tested-by: Roland Ramthun <mail@roland-ramthun.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24USB: ftdi_sio: fix TIOCSSERIAL baud_base handlingJohan Hovold1-2/+1
Return EINVAL if new baud_base does not match the current one. The baud_base is device specific and can not be changed. This restores the old (pre-2005) behaviour which was changed due to a misunderstanding regarding this fact (see https://lkml.org/lkml/2005/1/20/84). Reported-by: Torbjörn Lofterud <torbjorn@pi.nxs.se> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell1-1/+1
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-12Merge branch 'for-next/dwc3' of ↵Greg Kroah-Hartman1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (392 commits) usb: dwc3: ep0: fix for possible early delayed_status usb: dwc3: gadget: fix stream enable bit usb: dwc3: ep0: fix GetStatus handling (again) usb: dwc3: ep0: use dwc3_request for ep0 requsts instead of usb_request usb: dwc3: use correct hwparam register for power mgm check usb: dwc3: omap: move to module_platform_driver usb: dwc3: workaround: missing disconnect event usb: dwc3: workaround: missing USB3 Reset event usb: dwc3: workaround: U1/U2 -> U0 transiton usb: dwc3: gadget: return early in dwc3_cleanup_done_reqs() usb: dwc3: ep0: handle delayed_status again usb: dwc3: ep0: push ep0state into xfernotready processing usb: dwc3: fix sparse errors usb: dwc3: fix few coding style problems usb: dwc3: move generic dwc3 code from gadget into core usb: dwc3: use a helper function for operation mode setting usb: dwc3: ep0: don't use ep0in for transfers usb: dwc3: ep0: use proper endianess in SetFeature for wIndex usb: dwc3: core: drop DWC3_EVENT_BUFFERS_MAX usb: dwc3: omap: add multiple instances support to OMAP ...
2011-12-01usb: ftdi_sio: add PID for Propox ISPcable IIIMarcin Kościelnicki1-0/+1
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: serial: ftdi_sio: Handle the old_termios == 0 case e.g. uart_resume_port()Andrew Worsley1-0/+4
Handle null old_termios in ftdi_set_termios() calls from uart_resume_port(). Signed-off-by: Andrew Worsley <amworsley@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: Fix Corruption issue in USB ftdi driver ftdi_sio.cAndrew Worsley1-3/+11
Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Cc: stable <stable@vger.kernel.org> ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other ↵Uwe Bonnes1-25/+16
drivers Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structureUwe Bonnes1-1/+6
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structureUwe Bonnes1-0/+8
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structureUwe Bonnes1-0/+2
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structureUwe Bonnes1-0/+1
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sioUwe Bonnes1-0/+26
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI BoardPeter Stuge1-0/+2
Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard, and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger Interface Board. The ICDI board can also be used stand-alone, for other boards and chips than the kit it came with. The ICDI has both old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm pitch connector. Tested with EK-LM3S9B90, where the BD-ICDI board is included. Signed-off-by: Peter Stuge <peter@stuge.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-04USB: ftdi_sio: add PID for Sony Ericsson UrbanHakan Kvist1-0/+2
Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban Signed-off-by: Hakan Kvist <hakan.kvist@sonyericsson.com> Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-29Merge 3.1-rc4 into usb-nextGreg Kroah-Hartman1-1/+1
This was done to resolve a conflict in this file: drivers/usb/host/xhci-ring.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-25USB: ftdi_sio: add Calao reference board supportJean-Christophe PLAGNIOL-VILLARD1-1/+19
Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23USB: use usb_endpoint_maxp() instead of le16_to_cpu()Kuninori Morimoto1-1/+1
Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-10USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-deviceArtur Zimmer1-0/+1
Here is a patch for a new PID (zeitcontrol-device mifare-reader FT232BL(like FT232BM but lead free)). Signed-off-by: Artur Zimmer <artur128@3dzimmer.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08usb: serial: ftdi_sio.c: For the FT232H FTDI_SIO_SET_BAUDRATE_REQUEST, index ↵Uwe Bonnes1-1/+4
needs to be shifted too the recent addition of the FT232H showed that baudrate was set wrong. See gmane.linux.usb.general: "[ftdi_sio] FT232H support". With the old code, the MSB of the 4 encoded fractional divider bits and more important the clock predivider bits got lost. Adding the FT232H to the code patch were these bits are shifted solves the problem. I verified baud rates with a scope now. I suspect, that the BM device probably needs these bits shifted too. But there is no predivider bit, so this is not obvious, and a missing MSB of the encoded fractional divider only shifts the resulting baudrate minimal. The AM has only 3 bits of encoded fractional divider, so it is not impacted. I have no BM device to test, so I only added a comment and left the code for the BM untouched. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: ftdi_sio: fix minor typo in get_ftdi_divisorIonut Nicu1-1/+1
Even if it's unlikely for this to cause an error, there is a typo in the code that uses the bitwise-AND operator instead of the logical one. Signed-off-by: Ionut Nicu <ionut.nicu@cloudbit.ro> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-27USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.cUwe Bonnes1-5/+14
appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-08USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driverSteffen Sledz1-0/+1
E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2. Signed-off-by: Steffen Sledz <sledz@dresearch-fe.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29USB: serial: ftdi_sio: adding support for TavIR STK500Benedek László1-0/+1
Adding support for the TavIR STK500 (id 0403:FA33) Atmel AVR programmer device based on FTDI FT232RL. Signed-off-by: Benedek László <benedekl@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: ftdi_sio: add ids for Hameg HO720 and HO730Paul Friedrich1-0/+2
usb serial: ftdi_sio: add two missing USB ID's for Hameg interfaces HO720 and HO730 Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: ftdi_sio: add PID for OCT DK201 docking stationJohan Hovold1-0/+1
Add PID 0x0103 for serial port of the OCT DK201 docking station. Reported-by: Jan Hoogenraad <jan@hoogenraad.net> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: ftdi_sio: Added IDs for CTI USB Serial DevicesChristian Simon1-0/+2
I added new ProdutIds for two devices from CTI GmbH Leipzig. Signed-off-by: Christian Simon <simon@swine.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-16Merge branch 'tty-next' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits) pch_uart: reference clock on CM-iTC pch_phub: add new device ML7213 n_gsm: fix UIH control byte : P bit should be 0 n_gsm: add a documentation serial: msm_serial_hs: Add MSM high speed UART driver tty_audit: fix tty_audit_add_data live lock on audit disabled tty: move cd1865.h to drivers/staging/tty/ Staging: tty: fix build with epca.c driver pcmcia: synclink_cs: fix prototype for mgslpc_ioctl() Staging: generic_serial: fix double locking bug nozomi: don't use flush_scheduled_work() tty/serial: Relax the device_type restriction from of_serial MAINTAINERS: Update HVC file patterns tty: phase out of ioctl file pointer for tty3270 as well tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile pch_uart: Fix DMA channel miss-setting issue. pch_uart: fix exclusive access issue pch_uart: fix auto flow control miss-setting issue pch_uart: fix uart clock setting issue pch_uart : Use dev_xxx not pr_xxx ... Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied twice, then changes to the same area in one branch)
2011-03-09USB: serial: ftdi_sio: adding support for OLIMEX ARM-USB-OCD-HJF Argentino1-0/+2
Adding support for the OLIMEX ARM-USB-OCD-H JTAG device (id 15ba:002b) based on FTDI FT2232H Signed-off-by: JF Argentino <jf.argentino@free.fr> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24Merge 2.6.38-rc6 into tty-nextGreg Kroah-Hartman1-0/+27
This was to resolve a merge issue with drivers/char/Makefile and drivers/tty/serial/68328serial.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: remove filp from the USB tty ioctlsAlan Cox1-2/+2
We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmset: kill the file pointer argumentAlan Cox1-2/+2
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmget: kill off the passing of the struct fileAlan Cox1-2/+2
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17Merge 2.6.38-rc5 into usb-nextGreg Kroah-Hartman1-1/+38
This is needed to resolve some merge conflicts that were found in the USB host controller patches, and reported by Stephen Rothwell. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrographMichael Williamson1-0/+1
Add the USB Vendor ID and Product ID for a Acton Research Corp. spectrograph device with a FTDI chip for serial I/O. Signed-off-by: Michael H Williamson <michael.h.williamson@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03USB: ftdi_sio: add ST Micro Connect Lite uart supportJean-Christophe PLAGNIOL-VILLARD1-0/+26
on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22USB: ftdi_sio: fix resolution of 2232H baud rate dividersDaniel Glöckner1-1/+1
The 2232H high speed baud rates also support fractional baud rate divisors, but when the performing the divisions before the multiplication, the fractional bits are lost. Signed-off-by: Daniel Glöckner <dg@emlix.com> Acked-by: Mark Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-24 15:37:09 +0000