summaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy
AgeCommit message (Collapse)AuthorFilesLines
2015-09-21usb: phy: isp1301: Export I2C module alias informationJavier Martinez Canillas1-0/+1
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the device was registered using OF or platform code so So the driver needs to export the I2C table and this be built into the module or udev won't have the necessary information to auto load the module when the device is added. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: phy: phy-generic: Fix reset behaviour on legacy bootRoger Quadros1-1/+2
The gpio-desc migration done in v4.0 caused a regression with legacy boots due to reversed reset logic. e.g. omap3-beagle USB host breaks on legacy boot. Request the reset GPIO with GPIOF_ACTIVE_LOW flag so that it matches the driver logic and pin behaviour. Fixes: e9f2cefb0cdc ("usb: phy: generic: migrate to gpio_desc") Cc: <stable@vger.kernel.org> # 4.0+ Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: phy: fix phy-qcom-8x16-usb buildRandy Dunlap1-1/+1
Fix build errors that happen when USB_QCOM_8X16_PHY=y and EXTCON=m: drivers/built-in.o: In function `phy_8x16_init': phy-qcom-8x16-usb.c:(.text+0x86ef4): undefined reference to `extcon_get_cable_state' drivers/built-in.o: In function `phy_8x16_probe': phy-qcom-8x16-usb.c:(.text+0x870bf): undefined reference to `extcon_get_edev_by_phandle' phy-qcom-8x16-usb.c:(.text+0x87133): undefined reference to `extcon_register_interest' phy-qcom-8x16-usb.c:(.text+0x87151): undefined reference to `extcon_unregister_interest' drivers/built-in.o: In function `phy_8x16_remove': phy-qcom-8x16-usb.c:(.text+0x872ec): undefined reference to `extcon_unregister_interest' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: phy: phy-keystone: Simplify return statementSaurabh Karajgaonkar1-5/+1
Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: phy: phy-mxs-usb: Simplify return statementSaurabh Karajgaonkar1-5/+1
Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-30usb: phy: msm: Add D+/D- lines route controlIvan T. Ivanov1-0/+47
apq8016-sbc board is using Dual SPDT USB Switch (TC7USB40MU), witch is controlled by GPIO to de/multiplex D+/D- USB lines to USB2513B Hub and uB connector. Add support for this. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29usb: phy: qcom: New APQ8016/MSM8916 USB transceiver driverIvan T. Ivanov3-0/+451
Driver handles PHY initialization, clock management, power management and workarounds required after resetting the hardware. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29usb: pass flags parameter to gpiod_get functionsUwe Kleine-König1-2/+4
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Currently this parameter is made optional with the help of a cpp trick. To allow dropping this hack convert callers to explictly pass a value for flags. Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29usb: phy: msm-usb: Replace deprecated API of extconChanwoo Choi1-10/+10
This patch removes the deprecated notifier API of extcon framwork and then use the new extcon API with the unique id to indicate the each external connector (USB, USB-HOST). Alter deprecated API as following: - extcon_register_interest() -> extcon_register_notifier() - extcon_get_cable_state(*edev, char *) -> extcon_get_cable_state_(*edev, id) Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29usb: phy: tahvo: Use devm_extcon_dev_[allocate|register]() and replace ↵Chanwoo Choi1-14/+13
deprecated API This patch uses the devm_extcon_dev_[allocate|register]() to manage the resource automatically and replace deprecated API as following: - extcon_[set|get]_cable_state(*edev, char *) -> extcon_[set|get]_cable_state_(*edev, id) Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29usb: phy: omap-otg: Replace deprecated API of extconChanwoo Choi1-11/+11
This patch removes the deprecated notifier API of extcon framwork and then use the new extcon API with the unique id to indicate the each external connector (USB, USB-HOST). Alter deprecated API as following: - extcon_register_interest() -> extcon_register_notifier() - extcon_get_cable_state(*edev, char *) -> extcon_get_cable_state_(*edev, id) [ balbi@ti.com : fix build break ] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: phy: mxs: suspend to RAM causes NULL pointer dereferenceStefan Wahren1-0/+3
Triggering suspend to RAM via sysfs on a i.MX28 causes a NULL pointer dereference. This patch avoids the oops in mxs_phy_get_vbus_status() by aborting since there is no syscon available. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: efdbd3a5d6e ("usb: phy: mxs: do not set PWD.RXPWD1PT1 for low speed connection") CC: <stable@vger.kernel.org> # 4.0 Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-06-26Merge tag 'usb-4.2-rc1' of ↵Linus Torvalds6-289/+183
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...
2015-06-26Merge tag 'char-misc-4.2-rc1' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver pull request for 4.2-rc1. Lots of mei, extcon, coresight, uio, mic, and other driver updates in here. Full details in the shortlog. All of these have been in linux-next for some time with no reported problems" * tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits) mei: me: wait for power gating exit confirmation mei: reset flow control on the last client disconnection MAINTAINERS: mei: add mei_cl_bus.h to maintained file list misc: sram: sort and clean up included headers misc: sram: move reserved block logic out of probe function misc: sram: add private struct device and virt_base members misc: sram: report correct SRAM pool size misc: sram: bump error message level on unclean driver unbinding misc: sram: fix device node reference leak on error misc: sram: fix enabled clock leak on error path misc: mic: Fix reported static checker warning misc: mic: Fix randconfig build error by including errno.h uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config uio: pruss: Add CONFIG_HAS_IOMEM dependence uio: pruss: Include <linux/sizes.h> extcon: Redefine the unique id of supported external connectors without 'enum extcon' type char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration(). Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion parport: check exclusive access before register w1: use correct lock on error in w1_seq_show() ...
2015-06-12extcon: Redefine the unique id of supported external connectors without ↵Chanwoo Choi1-1/+1
'enum extcon' type This patch just redefine the unique id of supported external connectors without 'enum extcon' type. Because unique id would be used on devictree file(*.dts) to indicate the specific external connectors like key number of input framework. So, I have the plan to move this definitions to following header file which includes the unique id of supported external connectors. - include/dt-bindings/extcon/extcon.h Fixes: 2a9de9c0f08d ("extcon: Use the unique id for external connector instead of string") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-08Merge 4.1-rc7 into usb-nextGreg Kroah-Hartman2-4/+5
This resolves a merge issue in musb_core.c and we want the fixes that were in Linus's tree in this branch as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-02Merge tag 'usb-for-v4.2' of ↵Greg Kroah-Hartman3-28/+182
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.2 merge window - dwc2 adds hibernation support - preparation for sunxi glue to musb driver - new ULPI bus - new ULPI PHY driver for TUSB1210 - musb patches to support multiple DMA engines on same binary - support for R-Car E2 on renesas_usbhs Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: phy: Add interface to get phy give of device_node.NeilBrown1-27/+70
Split the "get phy from device_node" functionality out of "get phy by phandle" so it can be used directly. This is useful when a battery-charger is intimately associated with a particular phy but handled by a separate driver. The charger can find the device_node based on sibling relationships without the need for a redundant declaration in the devicetree description. As a peripheral that gets a phy will often want to register a notifier block, and de-register it later, that functionality is included so the de-registration is automatic. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: phy: tahvo: Pass the IRQF_ONESHOT flagFabio Estevam1-1/+2
Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: phy: ab8500-usb: Pass the IRQF_ONESHOT flagFabio Estevam1-3/+3
Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-22extcon: Use the unique id for external connector instead of stringChanwoo Choi1-4/+5
This patch uses the unique id to identify the type of external connector instead of string name. The string name have the many potential issues. So, this patch defines the 'extcon' enumeration which includes all supported external connector on EXTCON subsystem. If new external connector is necessary, the unique id of new connector have to be added in 'extcon' enumeration. There are current supported external connector in 'enum extcon' as following: enum extcon { EXTCON_NONE = 0x0, /* USB external connector */ EXTCON_USB = 0x1, EXTCON_USB_HOST = 0x2, /* Charger external connector */ EXTCON_TA = 0x10, EXTCON_FAST_CHARGER = 0x11, EXTCON_SLOW_CHARGER = 0x12, EXTCON_CHARGE_DOWNSTREAM = 0x13, /* Audio and video external connector */ EXTCON_LINE_IN = 0x20, EXTCON_LINE_OUT = 0x21, EXTCON_MICROPHONE = 0x22, EXTCON_HEADPHONE = 0x23, EXTCON_HDMI = 0x30, EXTCON_MHL = 0x31, EXTCON_DVI = 0x32, EXTCON_VGA = 0x33, EXTCON_SPDIF_IN = 0x34, EXTCON_SPDIF_OUT = 0x35, EXTCON_VIDEO_IN = 0x36, EXTCON_VIDEO_OUT = 0x37, /* Miscellaneous external connector */ EXTCON_DOCK = 0x50, EXTCON_JIG = 0x51, EXTCON_MECHANICAL = 0x52, EXTCON_END, }; For example in extcon-arizona.c: To use unique id removes the potential issue about handling the inconsistent name of external connector with string. - Previously, use the string to register the type of arizona jack connector static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", "Line-out", }; - Newly, use the unique id to register the type of arizona jack connector static const enum extcon arizona_cable[] = { EXTCON_MECHANICAL, EXTCON_MICROPHONE, EXTCON_HEADPHONE, EXTCON_LINE_OUT, EXTCON_NONE, }; And this patch modify the prototype of extcon_{get|set}_cable_state_() which uses the 'enum extcon id' instead of 'cable_index'. Because although one more extcon drivers support USB cable, each extcon driver might has the differnt 'cable_index' for USB cable. All extcon drivers can use the unique id number for same external connector with modified extcon_{get|set}_cable_state_(). - Previously, use 'cable_index' on these functions: extcon_get_cable_state_(struct extcon_dev*, int cable_index) extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state) -Newly, use 'enum extcon id' on these functions: extcon_get_cable_state_(struct extcon_dev*, enum extcon id) extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state) Cc: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [arnd: Report the build break about drivers/usb/phy/phy-tahvo.c after using the unique id for external connector insteadf of string] Reported-by: Arnd Bergmann <arnd@arndb.de> [dan.carpenter: Report the build warning of extcon_{set|get}_cable_state_()] Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2015-05-18Merge 4.1-rc4 into usb-nextGreg Kroah-Hartman1-1/+1
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10usb: phy-ab8500-usb: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10usb: phy: Remove the phy-rcar-gen2-usb driverGeert Uytterhoeven3-260/+0
The phy-rcar-gen2-usb driver, which supports legacy platform data only, is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy board support"). This driver was superseded by the DT-only phy-rcar-gen2 driver, which was introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHY driver"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-07usb: phy: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven1-1/+1
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-07usb: phy-ab8500-usb: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-28usb: phy: Remove the phy-rcar-gen2-usb driverGeert Uytterhoeven3-260/+0
The phy-rcar-gen2-usb driver, which supports legacy platform data only, is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy board support"). This driver was superseded by the DT-only phy-rcar-gen2 driver, which was introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHY driver"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-28usb: phy: msm: Manual PHY and LINK controller VBUS change notificationIvan T. Ivanov1-0/+26
VBUS is not routed to USB PHY on recent Qualcomm platforms. USB controller must see VBUS in order to pull-up DP when setting RS bit. Henc configure USB PHY and LINK registers sense VBUS and enable manual pullup on D+ line. Cc: Vamsi Krishna <vskrishn@codeaurora.org> Cc: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-28usb: phy: msm: Use extcon framework for VBUS and ID detectionIvan T. Ivanov2-0/+85
On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-27usb: phy: isp1301: work around tps65010 dependencyArnd Bergmann1-1/+1
The isp1301-omap driver contains special hooks for the TPS65010 power management controller. It provides its own 'tps65010_set_vbus_draw' wrapper in case that driver is not enabled through Kconfig, but fails to handle the case where isp1301-omap is built-in but TPS65010 is a loadable module, which currently results in a link error: drivers/built-in.o: In function `isp1301_set_power': :(.text+0x14e188): undefined reference to `tps65010_set_vbus_draw' This is a workaround to use the same trick as before also when tps65010 is a module. Doing a proper fix would require much larger changes to the driver that is not really worth it when the usb-phy drivers are going to eventually get replaced with generic-phy drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-13Merge tag 'usb-4.1-rc1' of ↵Linus Torvalds7-29/+15
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver updates from Greg KH: "Here's the big USB (and PHY) driver patchset for 4.1-rc1. Everything here has been in linux-next, and the full details are below in the shortlog. Nothing major, just the normal round of new drivers,api updates, and other changes, mostly in the USB gadget area, as usual" * tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits) drivers/usb/core: devio.c: Removed an uneeded space before tab usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume usb: chipidea: debug: add low power mode check before print registers usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode usb: core: hub: use new USB_RESUME_TIMEOUT usb: isp1760: hcd: use new USB_RESUME_TIMEOUT usb: dwc2: hcd: use new USB_RESUME_TIMEOUT usb: host: sl811: use new USB_RESUME_TIMEOUT usb: host: r8a66597: use new USB_RESUME_TIMEOUT usb: host: oxu210hp: use new USB_RESUME_TIMEOUT usb: host: fusbh200: use new USB_RESUME_TIMEOUT usb: host: fotg210: use new USB_RESUME_TIMEOUT usb: host: isp116x: use new USB_RESUME_TIMEOUT usb: musb: use new USB_RESUME_TIMEOUT usb: host: uhci: use new USB_RESUME_TIMEOUT usb: host: ehci: use new USB_RESUME_TIMEOUT usb: host: xhci: use new USB_RESUME_TIMEOUT usb: define a generic USB_RESUME_TIMEOUT macro usb: musb: dsps: fix build on i386 when COMPILE_TEST is set ehci-hub: use USB_DT_HUB ...
2015-04-10Merge remote-tracking branches 'regulator/topic/mode', ↵Mark Brown2-12/+7
'regulator/topic/notifier', 'regulator/topic/palmas', 'regulator/topic/qcom' and 'regulator/topic/stw481x' into regulator-next
2015-04-03usb: phy: rcar-gen2-usb: Fix USBHS_UGSTS_LOCK valueYoshihiro Shimoda1-1/+1
According to the technical update (No. TN-RCS-B011A/E), the UGSTS LOCK bit location is bit 8, not bits 9 and 8. So, this patch fixes the USBHS_UGSTS_LOCK value. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-24Merge tag 'usb-for-v4.1' of ↵Greg Kroah-Hartman5-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.1 merge window As usual, a big pile of commits. This time a total of 111 non-merge commits. Other than the usual set of cleanups and non-critical fixes, we have some interesting work for AM335x's MUSB babble recovery. Now that takes a lot less time and we don't have to Reset MUSB all the time. The printer gadget has been converted to configfs interface and the atmel udc has learned suspend/resume with wakeup. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-24usb: phy: Fix USB_ULPI_VIEWPORT Kconfig dependencyIvan T. Ivanov1-1/+1
USB_ULPI_VIEWPORT didn't depend on USB_ULPI, while USB_ULPI is using non user selectable USB_ULPI_VIEWPORT. Fix this. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-23Merge 4.0-rc5 into usb-nextGreg Kroah-Hartman1-0/+3
We want the USB fixes in here as well to resolve merge conflicts. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-19usb: phy: Find the right match in devm_usb_phy_matchAxel Lin1-1/+3
The res parameter passed to devm_usb_phy_match() is the location where the pointer to the usb_phy is stored, hence it needs to be dereferenced before comparing to the match data in order to find the correct match. Fixes: 410219dcd2ba ("usb: otg: utils: devres: Add API's to associate a device with the phy") Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: <stable@vger.kernel.org> # v3.6+ Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-18usb: phy: msm: Remove dead codeStephen Boyd2-17/+3
This code is no longer used now that mach-msm has been removed. Delete it. Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-13usb: phy: msm: Remove dead codeStephen Boyd2-17/+3
This code is no longer used now that mach-msm has been removed. Delete it. Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-11usb: phy: phy-generic: No need to call gpiod_direction_output() twiceFabio Estevam1-7/+5
Commit 9eb0797722895f4309b4 ("usb: phy: generic: fix the gpios to be optional") calls gpiod_direction_output() in the probe function, so there is no need to call it again, as we can simply call gpiod_set_value() directly. Also, in usb_gen_phy_shutdown() we can simply put the GPIO directly in its active level state and this allows us to simplify the nop_reset function to treat only the reset case. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-11usb: phy: fixed comment typoMickael Maison1-1/+1
Fixed a comment typo in drivers/usb/phy/of.c Signed-off-by: Mickael Maison <mickael.maison@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-11usb: phy: ab8500: fixed comment typoMickael Maison1-1/+1
Fixed a comment typo in drivers/usb/phy/phy-ab8500-usb.c Signed-off-by: Mickael Maison <mickael.maison@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10usb: phy: am335x-control: check return value of bus_find_deviceDavid Dueck1-0/+3
This fixes a potential null pointer dereference. Cc: <stable@vger.kernel.org> # v3.16+ Fixes: d4332013919a ("driver core: dev_get_drvdata: Don't check for NULL dev") Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-09usb: phy: phy-msm-usb: Rename regulator_set_optimum_modeBjorn Andersson1-10/+5
The function regulator_set_optimum_mode() is changing name to regulator_set_load(), so update the code accordingly. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09usb: phy: ab8500-usb: Rename regulator_set_optimum_modeBjorn Andersson1-2/+2
The function regulator_set_optimum_mode() is changing name to regulator_set_load(), so update the code accordingly. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-04Merge tag 'usb-for-v3.20' of ↵Greg Kroah-Hartman4-82/+199
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.20 merge window Here's the big pull request for Gadgets and PHYs. It's a total of 217 non-merge commits with pretty much everything being touched. The most important bits are a ton of new documentation for almost all usb gadget functions, a new isp1760 UDC driver, several improvements to the old net2280 UDC driver, and some minor tracepoint improvements to dwc3. Other than that, a big list of minor cleanups, smaller bugfixes and new features all over the place. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: phy: phy-generic: Fix USB PHY gpio resetFabio Estevam1-4/+5
Since commit e9f2cefb0cdc2ae ("usb: phy: generic: migrate to gpio_desc") a kernel hang is observed on imx51-babbage board: [ 1.392824] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.397975] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.403205] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.422335] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.432962] hub 1-0:1.0: USB hub found [ 1.437119] hub 1-0:1.0: 1 port detected This hang happens because the reset GPIO stays at logic level 0. The USB PHY reset gpio is defined in the dts file as: reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; , which means it is active low, so what the gpio reset pin needs to do in this case is the following: - Go to logic level 0 to reset the USB PHY - Stay at 0 for a bit - Go back to logic level 1 When switching to gpiod API we need to following according to Documentation/gpio/consumer.txt: "The first thing a driver must do with a GPIO is setting its direction. If no direction-setting flags have been given to gpiod_get*(), this is done by invoking one of the gpiod_direction_*() functions: int gpiod_direction_input(struct gpio_desc *desc) int gpiod_direction_output(struct gpio_desc *desc, int value)" Since no direction-setting flags have been given to devm_gpiod_get_optional() in our case, we need to use gpiod_direction_output to comply with the gpiod API. With this change the USB PHY reset performs a proper reset, the kernel boots fine and USB host is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: phy: generic: fix the vbus interrupt requestRobert Jarzmik1-1/+2
Declare the interrupt as "one shot" so that it is masked until the end of the threaded handler. This prevents the irq core from spitting out an error : "Threaded irq requested with handler=NULL and !ONESHOT for irq 63" This was introduced by commit "usb: phy: generic: add vbus support". Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: phy: generic: fix the gpios to be optionalRobert Jarzmik1-5/+7
All the gpios, ie. reset-gpios and vbus-detect-gpio, should be optional and not prevent the driver from working. Fix the regression in the behavior introduced by commit "usb: phy: generic: migrate to gpio_desc". Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 02:33:56 +0000