summaryrefslogtreecommitdiffstats
path: root/drivers/usb/misc
AgeCommit message (Collapse)AuthorFilesLines
2022-10-07Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds4-25/+34
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
2022-09-27usb: idmouse: fix an uninit-value in idmouse_openDongliang Mu1-4/+4
In idmouse_create_image, if any ftip_command fails, it will go to the reset label. However, this leads to the data in bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check for valid image incurs an uninitialized dereference. Fix this by moving the check before reset label since this check only be valid if the data after bulk_in_buffer[HEADER] has concrete data. Note that this is found by KMSAN, so only kernel compilation is tested. Reported-by: syzbot+79832d33eb89fb3cd092@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20220922134847.1101921-1-dzm91@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27usb: usb251xb: Switch to use dev_err_probe() helperYang Yingliang1-8/+4
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. It's more simple in error path. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220922123951.2004328-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-16Merge tag 'v6.0-rc5' into i2c/for-mergewindowWolfram Sang1-4/+1
Linux 6.0-rc5
2022-09-09usb: misc: usb3503: call clk_disable_unprepare in the error handlingDongliang Mu1-6/+19
Smatch reports the following warning: drivers/usb/misc/usb3503.c:267 usb3503_probe() warn: 'hub->clk' from clk_prepare_enable() not released on lines: 240,246,252 Fix this by adding a flag to indicate if hub->clk is prepared or not and invoke clk_disable_unprepare in the error handling. Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20220908055903.3550723-1-dzm91@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07usb: misc: uss720: fix uninitialized variable rlenDongliang Mu1-4/+4
Smatch reports the following error: uninitialized symbol 'rlen' drivers/usb/misc/uss720.c:514 parport_uss720_epp_write_data() error drivers/usb/misc/uss720.c:575 parport_uss720_ecp_write_data() error drivers/usb/misc/uss720.c:593 parport_uss720_ecp_read_data() error drivers/usb/misc/uss720.c:626 parport_uss720_write_compat() error The root cause is, the failure of usb_bulk_msg leads to the uninitialized variable rlen in printk function. Fix this by initializing rlen with zero. Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20220903100004.2874741-1-dzm91@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05Merge 6.0-rc4 into usb-nextGreg Kroah-Hartman1-4/+1
We need the USB fixes in here and this resolves the merge issue in: drivers/usb/dwc3/gadget.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: move from strlcpy with unused retval to strscpyWolfram Sang1-3/+3
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210116.7517-1-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: misc: onboard_usb_hub: Drop reset delay in onboard_hub_power_off()Matthias Kaehlcke1-4/+1
onboard_hub_power_off() currently has a delay after asserting the reset of the hub. There is already a delay in onboard_hub_power_on() before de-asserting the reset, which ensures that the reset is asserted for the required time, so the delay in _power_off() is not needed. Skip the reset GPIO check before calling gpiod_set_value_cansleep(), the function returns early when the GPIO descriptor is NULL. Reviewed-By: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20220805111836.1.Id5a4dc0a2c046236116693aa55672295513a0f2a@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-3/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-08Merge tag 'tty-6.0-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ...
2022-07-28usb: misc: onboard_usb_hub: Remove duplicated power_on delayAlexander Stein1-3/+0
onboard_hub_power_on() already ensures the reset pulse width delay, so there is no need to wait right after requesting GPIO as well. Fixes: 40758e493f4d ("usb: misc: onboard_usb_hub: Add reset-gpio support") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220728064937.917935-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27usb: misc: onboard_usb_hub: Add TI USB8041 hub supportAlexander Stein2-0/+9
This is a 4-port 3.0 USB hub. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220727141117.909361-2-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27usb: misc: onboard_usb_hub: Add reset-gpio supportAlexander Stein2-5/+45
Despite default reset upon probe, release reset line after powering up the hub and assert reset again before powering down. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220727141117.909361-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27USB: usbsevseg: convert sysfs snprintf to sysfs_emitXuezhi Zhang1-1/+1
Fix the following coccincheck warning: drivers/usb/misc/usbsevseg.c:170:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com> Link: https://lore.kernel.org/r/20220727124415.8340-1-zhangxuezhi3@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hubFabrice Gasnier2-0/+3
Add support for Microchip USB2514B USB 2.0 hub to the onboard usb hub driver. Adopt the generic usb-device compatible ("usbVID,PID"). Some STM32MP1 boards have this hub on-board, with a supply that needs to be enabled for proper operation. Acked-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220726080708.162547-3-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27usb/misc: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'with'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220716134105.44710-1-yuanjilin@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-14usb: ldusb: replace ternary operator with max_t()Jiangshan Yi1-2/+4
Fix the following coccicheck warning: drivers/usb/misc/ldusb.c:719: WARNING opportunity for max(). drivers/usb/misc/ldusb.c:721: WARNING opportunity for max(). max_t() macro is defined in include/linux/minmax.h. It avoids multiple evaluations of the arguments when non-constant and performs strict type-checking. Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> Link: https://lore.kernel.org/r/20220713070205.3047256-1-13667453960@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-14usb: misc: onboard_hub: Fix 'missing prototype' warningMatthias Kaehlcke1-0/+1
When building with 'W=1' the compiler complains about missing prototypes for onboard_hub_create/destroy_pdevs(). Include the header with the prototypes to fix this. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20220711092431.1.I4016c759fd7fe2b32dd482994a20661f36e2cae3@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-08usb: misc: Add onboard_usb_hub driverMatthias Kaehlcke5-0/+604
The main issue this driver addresses is that a USB hub needs to be powered before it can be discovered. For discrete onboard hubs (an example for such a hub is the Realtek RTS5411) this is often solved by supplying the hub with an 'always-on' regulator, which is kind of a hack. Some onboard hubs may require further initialization steps, like changing the state of a GPIO or enabling a clock, which requires even more hacks. This driver creates a platform device representing the hub which performs the necessary initialization. Currently it only supports switching on a single regulator, support for multiple regulators or other actions can be added as needed. Different initialization sequences can be supported based on the compatible string. Besides performing the initialization the driver can be configured to power the hub off during system suspend. This can help to extend battery life on battery powered devices which have no requirements to keep the hub powered during suspend. The driver can also be configured to leave the hub powered when a wakeup capable USB device is connected when suspending, and power it off otherwise. Technically the driver consists of two drivers, the platform driver described above and a very thin USB driver that subclasses the generic driver. The purpose of this driver is to provide the platform driver with the USB devices corresponding to the hub(s) (a hub controller may provide multiple 'logical' hubs, e.g. one to support USB 2.0 and another for USB 3.x). Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: rename struct vc_data::vc_uni_pagedir*Jiri Slaby1-1/+1
As a follow-up to the commit 4173f018aae1 (tty/vt: consolemap: rename and document struct uni_pagedir), rename also the members of struct vc_data. I.e. pagedir -> pagedict. And while touching all the places, remove also the unnecessary vc_ prefix. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-03Revert "usb: misc: Add onboard_usb_hub driver"Greg Kroah-Hartman3-534/+0
This reverts commit 0298b4b95cb373c21e6323c905589f8dac42c5b4. The series still has built errors as reported in linux-next, so revert it for now. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Douglas Anderson <dianders@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Ravi Chandra Sadineni <ravisadineni@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-03Merge 5.18-rc5 into usb-nextGreg Kroah-Hartman2-7/+6
We need the USB fixes in here, and this resolves a merge issue in drivers/usb/dwc3/drd.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26usb: misc: Add onboard_usb_hub driverMatthias Kaehlcke3-0/+534
The main issue this driver addresses is that a USB hub needs to be powered before it can be discovered. For discrete onboard hubs (an example for such a hub is the Realtek RTS5411) this is often solved by supplying the hub with an 'always-on' regulator, which is kind of a hack. Some onboard hubs may require further initialization steps, like changing the state of a GPIO or enabling a clock, which requires even more hacks. This driver creates a platform device representing the hub which performs the necessary initialization. Currently it only supports switching on a single regulator, support for multiple regulators or other actions can be added as needed. Different initialization sequences can be supported based on the compatible string. Besides performing the initialization the driver can be configured to power the hub off during system suspend. This can help to extend battery life on battery powered devices which have no requirements to keep the hub powered during suspend. The driver can also be configured to leave the hub powered when a wakeup capable USB device is connected when suspending, and power it off otherwise. Technically the driver consists of two drivers, the platform driver described above and a very thin USB driver that subclasses the generic driver. The purpose of this driver is to provide the platform driver with the USB devices corresponding to the hub(s) (a hub controller may provide multiple 'logical' hubs, e.g. one to support USB 2.0 and another for USB 3.x). Note: the current series only supports hubs connected directly to a root hub, support for other configurations could be added if needed. Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20220217104219.v21.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-23usb: remove third argument of usb_maxpacket()Vincent Mailhol2-11/+6
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Duncan Sands <duncan.sands@free.fr> CC: Alan Stern <stern@rowland.harvard.edu> CC: Olav Kongas <ok@artecdesign.ee> CC: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-7-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: misc: eud: Fix an error handling path in eud_probe()Christophe JAILLET1-5/+5
It is odd to call devm_add_action_or_reset() before calling the function that should be undone. Either, the "_or_reset" part should be omitted, or the action should be recorded after the resources have been allocated. Switch the order of devm_add_action_or_reset() and usb_role_switch_get(). Fixes: 9a1bf58ccd44 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/362908699275ecec078381b42d87c817c6965fc6.1648979948.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: misc: fix improper handling of refcount in uss720_probe()Hangyu Hua1-2/+1
usb_put_dev shouldn't be called when uss720_probe succeeds because of priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL before destroy_priv in uss720_disconnect because usb_put_dev is in destroy_priv. Fix this by moving priv->usbdev = NULL after usb_put_dev. Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe") Cc: stable <stable@kernel.org> Reviewed-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-24usb: misc: USB_QCOM_EUD should depend on ARCH_QCOMGeert Uytterhoeven1-0/+1
The Qualcomm Embedded USB Debugger is not a pluggable USB device, and can only be present on Qualcomm SoCs. Hence add a dependency on ARCH_QCOM, to prevent asking the user about this driver when configuring a kernel without Qualcomm SoC support. Fixes: 9a1bf58ccd443268 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/f3ba3ea0d7f5e628c71cb7a9d62c9fb4589297b1.1645630266.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-14Merge 5.17-rc4 into usb-nextGreg Kroah-Hartman1-1/+3
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)Souradeep Chowdhury3-0/+262
Add support for control peripheral of EUD (Embedded USB Debugger) to listen to events such as USB attach/detach, pet EUD to indicate software is functional.Reusing the platform device kobj, sysfs entry 'enable' is created to enable or disable EUD. To enable the eud the following needs to be done echo 1 > /sys/bus/platform/.../enable To disable eud, following is the command echo 0 > /sys/bus/platform/.../enable Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com> Link: https://lore.kernel.org/r/0ac5c2b2c8e4ce4f4f342a08b48cfc61aeaf7ee8.1644339918.git.quic_schowdhu@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: usb251xb: add boost-up property supportTommaso Merciai1-1/+3
Add support for boost-up register of usb251xb hub. boost-up property control USB electrical drive strength This register can be set: - Normal mode -> 0x00 - Low -> 0x01 - Medium -> 0x10 - High -> 0x11 (Normal Default) References: - http://www.mouser.com/catalog/specsheets/2514.pdf p29 Reviewed-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> Link: https://lore.kernel.org/r/20220128181713.96856-1-tomm.merciai@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17usb: misc: ehset: Rework test mode entryRazvan Heghedus1-0/+58
The USB2.0 spec chapter 11.24.2.13 says that the USB port which is going under test needs to be put in suspend state before sending the test command. Many hubs, don't enforce this precondition and they work fine without this step. We should follow the specification and put the USB port in suspend before sending the test command. Also there are some "special" hubs, which requires to disable the USB port power instead of putting it in suspend. I found out only three hubs which requires this step, but if more are found, they can be added to the list. Since this changes the default implementation, it raises the posibility of finding other broken hubs which are not compliant with the spec and the test command might not work is the port is suspended. If such hubs are found, a similar workaround like the disable part can be implemented to skip putting the port in suspend. Signed-off-by: Razvan Heghedus <heghedus.razvan@gmail.com> Link: https://lore.kernel.org/r/20211213183617.14156-2-heghedus.razvan@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17usb: ftdi-elan: fix memory leak on device disconnectWei Yongjun1-0/+1
'ftdi' is alloced when probe device, but not free on device disconnect, this cause a memory leak as follows: unreferenced object 0xffff88800d584000 (size 8400): comm "kworker/0:2", pid 3809, jiffies 4295453055 (age 13.784s) hex dump (first 32 bytes): 00 40 58 0d 80 88 ff ff 00 40 58 0d 80 88 ff ff .@X......@X..... 00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. backtrace: [<000000000d47f947>] kmalloc_order_trace+0x19/0x110 mm/slab_common.c:960 [<000000008548ac68>] ftdi_elan_probe+0x8c/0x880 drivers/usb/misc/ftdi-elan.c:2647 [<000000007f73e422>] usb_probe_interface+0x31b/0x800 drivers/usb/core/driver.c:396 [<00000000fe8d07fc>] really_probe+0x299/0xc30 drivers/base/dd.c:517 [<0000000005da7d32>] __driver_probe_device+0x357/0x500 drivers/base/dd.c:751 [<000000003c2c9579>] driver_probe_device+0x4e/0x140 drivers/base/dd.c:781 Fix it by freeing 'ftdi' after nobody use it. Fixes: a5c66e4b2418 ("USB: ftdi-elan: client driver for ELAN Uxxx adapters") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20211217083428.2441-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-26USB: iowarrior: fix control-message timeoutsJohan Hovold1-6/+2
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Use the common control-message timeout define for the five-second timeout and drop the driver-specific one. Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable@vger.kernel.org # 2.6.21 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211025115159.4954-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-07Revert "usb: misc: ehset: Workaround for "special" hubs"Johan Hovold1-65/+16
This reverts commit ce3e90d5a0cdbcb2ddebbf9e4363e59fa779ad3a. The commit in question added list of quirky hubs, but the match implementation clearly hasn't been tested at all. First, hub_udev->dev.parent does not represent a USB interface so using to_usb_interface() makes no sense and we'd be passing a random pointer to usb_match_id(). Second, if hub_udev is a root hub it doesn't even even represent a USB device. Signed-off-by: Johan Hovold <johan@kernel.org> Fixes: ce3e90d5a0cd ("usb: misc: ehset: Workaround for "special" hubs") Cc: Razvan Heghedus <heghedus.razvan@gmail.com> Link: https://lore.kernel.org/r/20211007090601.19156-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05usb: misc: ehset: Workaround for "special" hubsRazvan Heghedus1-16/+65
The USB2.0 spec chapter 11.24.2.13 says that the USB port which is going under test needs to be put in suspend state before sending the test command. Many hubs, don't enforce this precondition and they work fine without this step. But there are some "special" hubs, which requires to disable the port power before sending the test command. Because the USB spec mention that the port should be suspended, also do this step before sending the test command. This could rise the problem with other hubs which are not compliant with the spec and the test command will not work if the port is suspend. If such hubs are found, a similar workaround like the disable part could be implemented to skip the suspend port command. Signed-off-by: Razvan Heghedus <heghedus.razvan@gmail.com> Link: https://lore.kernel.org/r/20210915121615.3790-1-heghedus.razvan@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13usb: misc: brcmstb-usb-pinmap: add IRQ checkSergey Shtylyov1-0/+2
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 517c4c44b323 ("usb: Add driver to allow any GPIO to be used for 7211 USB signals") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/806d0b1a-365b-93d9-3fc1-922105ca5e61@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05usb: misc: adutux: use swap()Salah Triki1-4/+1
Use swap() in order to make code cleaner. Issue found by coccinelle. Signed-off-by: Salah Triki <salah.triki@gmail.com> Link: https://lore.kernel.org/r/20210803005343.GA1578854@pc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24usb: ftdi-elan: remove redundant continue statement in a while-loopColin Ian King1-1/+0
The continue statement at the end of the while-loop is redundant, remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Continue has no effect") Link: https://lore.kernel.org/r/20210621095545.9659-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18Revert "USB: misc: Add onboard_usb_hub driver"Greg Kroah-Hartman3-515/+0
This reverts commit b4e326165e21d6a11483f6a4de2174b933413554 as the patch series is causing build issues in linux-next at the moment. Cc: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/YMuRcrE8xlWnFSWW@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15USB: misc: Add onboard_usb_hub driverMatthias Kaehlcke3-0/+515
The main issue this driver addresses is that a USB hub needs to be powered before it can be discovered. For discrete onboard hubs (an example for such a hub is the Realtek RTS5411) this is often solved by supplying the hub with an 'always-on' regulator, which is kind of a hack. Some onboard hubs may require further initialization steps, like changing the state of a GPIO or enabling a clock, which requires even more hacks. This driver creates a platform device representing the hub which performs the necessary initialization. Currently it only supports switching on a single regulator, support for multiple regulators or other actions can be added as needed. Different initialization sequences can be supported based on the compatible string. Besides performing the initialization the driver can be configured to power the hub off during system suspend. This can help to extend battery life on battery powered devices which have no requirements to keep the hub powered during suspend. The driver can also be configured to leave the hub powered when a wakeup capable USB device is connected when suspending, and power it off otherwise. Technically the driver consists of two drivers, the platform driver described above and a very thin USB driver that subclasses the generic driver. The purpose of this driver is to provide the platform driver with the USB devices corresponding to the hub(s) (a hub controller may provide multiple 'logical' hubs, e.g. one to support USB 2.0 and another for USB 3.x). Note: the current series only supports hubs connected directly to a root hub (through xhci-plat), support for other configurations could be added if needed. Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210609150159.v12.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09usb: misc: brcmstb-usb-pinmap: check return value after calling ↵Yang Yingliang1-0/+2
platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 517c4c44b323 ("usb: Add driver to allow any GPIO to be used for 7211 USB signals") Cc: stable <stable@vger.kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210605080914.2057758-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21USB: trancevibrator: fix control-request directionJohan Hovold1-2/+2
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the set-speed request which erroneously used USB_DIR_IN and update the default timeout argument to match (same value). Fixes: 5638e4d92e77 ("USB: add PlayStation 2 Trance Vibrator driver") Cc: stable@vger.kernel.org # 2.6.19 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210521133109.17396-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21misc/uss720: fix memory leak in uss720_probeDongliang Mu1-0/+1
uss720_probe forgets to decrease the refcount of usbdev in uss720_probe. Fix this by decreasing the refcount of usbdev by usb_put_dev. BUG: memory leak unreferenced object 0xffff888101113800 (size 2048): comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s) hex dump (first 32 bytes): ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1........... 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................ backtrace: [<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline] [<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline] [<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582 [<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline] [<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline] [<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline] [<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591 [<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275 [<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421 [<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292 [<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Fixes: 0f36163d3abe ("[PATCH] usb: fix uss720 schedule with interrupts off") Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+636c58f40a86b4a879e7@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20210514124348.6587-1-mudongliangabcd@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: misc: adutux: fix whitespace coding style issueMalte Deiseroth1-3/+3
Correct missing space error ceckpatch.pl is complaining about. Signed-off-by: Malte Deiseroth <mdeiseroth88@gmail.com> Link: https://lore.kernel.org/r/20210416080843.GA137657@utop Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-28usb: misc: usbsevseg: update to use usb_control_msg_send()Anant Thazhemadam1-43/+17
The newer usb_control_msg_{send|recv}() API ensures that a short read is treated as an error, data can be used off the stack, and raw usb pipes need not be created in the calling functions. For this reason, instances of usb_control_msg() have been replaced with usb_control_msg_send() appropriately. Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20210326223251.753952-4-anant.thazhemadam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-28usb: misc: ezusb: update to use usb_control_msg_send()Anant Thazhemadam1-14/+2
The newer usb_control_msg_{send|recv}() API ensures that a short read is treated as an error, data can be used off the stack, and raw usb pipes need not be created in the calling functions. For this reason, the instance of usb_control_msg() has been replaced with usb_control_msg_send() appropriately. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20210326223251.753952-3-anant.thazhemadam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-28usb: misc: ehset: update to use the usb_control_msg_{send|recv}() APIAnant Thazhemadam1-44/+32
The newer usb_control_msg_{send|recv}() API ensures that a short read is treated as an error, data can be used off the stack, and raw usb pipes need not be created in the calling functions. For this reason, instances of usb_control_msg() have been replaced with usb_control_msg_{recv|send}() appropriately. Now, we also test for a short device descriptor (which USB core should already have fetched if you get to probe this driver), but which wasn't verified again here before. Reviewed-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20210326223251.753952-2-anant.thazhemadam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky1-1/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-22Merge tag 'devicetree-for-5.12' of ↵Linus Torvalds1-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host fdtoverlay - Add kbuild support to build DT overlays (%.dtbo) - Drop NULLifying match table in of_match_device(). In preparation for this, there are several driver cleanups to use (of_)?device_get_match_data(). - Drop pointless wrappers from DT struct device API - Convert USB binding schemas to use graph schema and remove old plain text graph binding doc - Convert spi-nor and v3d GPU bindings to DT schema - Tree wide schema fixes for if/then schemas, array size constraints, and undocumented compatible strings in examples - Handle 'no-map' correctly for already reserved memblock regions * tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) driver core: platform: Drop of_device_node_put() wrapper of: Remove of_dev_{get,put}() dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt dt-bindings: can: rcar_canfd: Group tuples in pin control properties dt-bindings: power: renesas,apmu: Group tuples in cpus properties dt-bindings: mtd: spi-nor: Convert to DT schema format dt-bindings: Use portable sort for version cmp dt-bindings: ethernet-controller: fix fixed-link specification dt-bindings: irqchip: Add node name to PRUSS INTC dt-bindings: interconnect: Fix the expected number of cells dt-bindings: Fix errors in 'if' schemas dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required dt-bindings: Fix undocumented compatible strings in examples kbuild: Add support to build overlays (%.dtbo) scripts: dtc: Remove the unused fdtdump.c file scripts: dtc: Build fdtoverlay tool scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9 scripts: dtc: Fetch fdtoverlay.c from external DTC project dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings dt-bindings: iio: dac: Fix AD5686 references ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-02 08:16:03 +0000