summaryrefslogtreecommitdiffstats
path: root/drivers/usb/misc/usb3503.c
AgeCommit message (Collapse)AuthorFilesLines
2022-10-07Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds1-6/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
2022-09-09usb: misc: usb3503: call clk_disable_unprepare in the error handlingDongliang Mu1-6/+19
Smatch reports the following warning: drivers/usb/misc/usb3503.c:267 usb3503_probe() warn: 'hub->clk' from clk_prepare_enable() not released on lines: 240,246,252 Fix this by adding a flag to indicate if hub->clk is prepared or not and invoke clk_disable_unprepare in the error handling. Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20220908055903.3550723-1-dzm91@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-3/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-11usb: misc: usb3503: Fix logic in usb3503_init()Michal Simek1-2/+7
Based on https://lore.kernel.org/linux-arm-kernel/YCJv59g3Tq2haDSa@kroah.com/ initialization should fail if any registration fails. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/a8547f6fe698014df08cad3bcc9c5d9a7137d8b8.1612873935.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb/misc: usb3503: Use pm_ptr() macroPaul Cercueil1-10/+8
Use the newly introduced pm_ptr() macro, and mark the suspend/resume functions __maybe_unused. These functions can then be moved outside the CONFIG_PM_SUSPEND block, and the compiler can then process them and detect build failures independently of the config. If unused, they will simply be discarded by the compiler. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903112554.34263-8-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: usb3503: Convert to use GPIO descriptorsLinus Walleij1-59/+35
This converts the USB3503 to pick GPIO descriptors from the device tree instead of iteratively picking out GPIO number references and then referencing these from the global GPIO numberspace. The USB3503 is only used from device tree among the in-tree platforms. If board files would still desire to use it they can provide machine descriptor tables. Make sure to preserve semantics such as the reset delay introduced by Stefan. Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [mszyprow: invert the logic behind reset GPIO line] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20191211145226.25074-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: misc: usb3503: get optional clock by devm_clk_get_optional()Chunfeng Yun1-30/+18
When the driver tries to get optional clock, it ignores all errors except -EPROBE_DEFER, but if only ignores -ENOENT, it will cover some real errors, such as -ENOMEM, so use devm_clk_get_optional() to get optional clock. And remove unnecessary stack variable clk. Cc: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-25usb: misc: usb3503: Add system sleep support in non-I2C modeMarek Szyprowski1-8/+30
USB3503 chip can be used without any I2C connection, what is handled by a simple platform device driver. Add support for resetting the chip (via GPIO lines) during system suspend/resume cycle by adding calls to existing suspend/resume functions used for E2C device. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-11usb: misc: usb3503: make sure reset is low for at least 100usStefan Agner1-0/+2
When using a GPIO which is high by default, and initialize the driver in USB Hub mode, initialization fails with: [ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5) The reason seems to be that the chip is not properly reset. Probe does initialize reset low, however some lines later the code already set it back high, which is not long enouth. Make sure reset is asserted for at least 100us by inserting a delay after initializing the reset pin during probe. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: misc: Remove redundant license textGreg Kroah-Hartman1-14/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Keith Packard <keithp@keithp.com> Cc: Juergen Stuber <starblue@users.sourceforge.net> Cc: Cesar Miquel <miquel@df.uba.ar> Cc: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07usb: misc: usb3503: Clean up on driver unbindKrzysztof Kozlowski1-0/+24
The driver should clean up after itself by unpreparing the clock when it is unbound. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07usb: misc: usb3503: Set platform dataKrzysztof Kozlowski1-0/+1
Driver supports two paths of device instantiation: as platform and i2c device. In the platform path it lacks of storing the driver specific structure as drvdata. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-24usb: misc: usb3503: Use i2c_add_driver helper macroAndrew F. Davis1-1/+1
Use i2c_add_driver as it will add THIS_MODULE for us. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26usb/misc/usb3503: Always read refclk frequency from DTBen Gamari1-23/+24
This is necessary to set REF_SEL appropriately in uses where refclk is always available. Signed-off-by: Ben Gamari <ben@smart-cactus.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-03usb: misc: usb3503: delete unnecessary 'out of memory' messagesPeter Chen1-6/+2
The memory subsystem has already had similar message for it. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-20usb: misc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-23usb3503: clarify what the registers 'PDS' and 'CFG1' really doTobias Jakobi1-2/+2
The current comment sounds like you have to disable some of the ports to be able to use self-powered mode. This is misleading, so change the wording to reflect this. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23usb3503: correct error message in probe ('connect' to 'interrupt')Tobias Jakobi1-1/+1
intn is obviously the interrupt pin. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11usb: usb3503: add PM functionsJoonyoung Shim1-2/+32
The usb3503 needs to switch to standby mode while suspending and should switch to hub mode when resumed. Also we can control clock on PM function. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09usb: misc: usb3503: Update error code in print messageTushar Behera1-1/+2
'err' is uninitialized, rather print the error code directly. This also fixes following warning. drivers/usb/misc/usb3503.c: In function ‘usb3503_probe’: drivers/usb/misc/usb3503.c:195:11: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized] dev_err(dev, "unable to request refclk (%d)\n", err); Signed-off-by: Tushar Behera <tushar.b@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: usb5303: add support for reference clock specified in device treeMarek Szyprowski1-2/+57
USB3503 chip supports 8 values of reference clock. The value is specified by REF_SEL[1:0] pins and INT_N line. This patch add support for getting 'refclk' clock, enabling it and setting INT_N line according to the value of the gathered clock. If no clock has been specified, driver defaults to the old behaviour (assuming that clock has been specified by REF_SEL pins from primary reference clock frequencies table). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Support operation with no I2C controlMark Brown1-17/+76
Refactor so that register writes for configuration are only performed if the device has a regmap provided and also register as a platform driver. This allows the driver to be used to manage GPIO based control of the device. Signed-off-by: Mark Brown <broonie@linaro.org> Cc: devicetree@vger.kernel.org Reviewed-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Add USB3503A to the compatible listMark Brown1-0/+1
There are no software visible differences that I am aware of but in case any are discovered allow the DTS to specify exactly which device is present. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Default to hub modeMark Brown1-1/+1
Since there is no runtime interface for changing modes this is probably the most sensible default. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Fix typos in error messagesMark Brown1-2/+2
Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Factor out I2C probeMark Brown1-34/+43
In preparation for supporting operation without an I2C control interface factor out the I2C-specific parts of the probe routine from those that don't do any register I/O. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Convert to regmapMark Brown1-57/+36
This will give access to the diagnostic infrastructure regmap has but the main point is to support future refactoring. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Actively manage Hub Connect GPIOMark Brown1-6/+12
If the connect signal is pulled high then the device will start up meaning that if we just pull it high on probe then the device will start running prior to the configuration being written out. Fix this by pulling the GPIO low when we reset and only pulling it high when configuration is finished. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Use gpio_set_value_cansleep()Mark Brown1-1/+1
The /RESET GPIO is not manipulated from atomic context so support GPIOs that can't be written from atomic context by using _cansleep(). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Convert to devm_ APIsMark Brown1-35/+7
Saves us a bit of code. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: Fix swapped properties in usb3503 DT parsingMark Brown1-2/+2
The intn and connect GPIO properties are swapped in the code which will cause failures at runtime if these are connected, fix the code. There are currently no in-tree users of this device to check or update. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-31usb: misc: usb3503: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03usb: misc: usb3503: Remove 100ms sleep on reset, conform to data sheetJulius Werner1-4/+2
The usb3503 driver sleeps a flat 100ms when resetting the chip, with a comment about waiting for the reference clock. This seems to be a board-specific detail that should not hold up boot across all platforms. This patch reduces the sleep to the 4ms initialization delay that the chip itself actually requires (as per its data sheet). If certain boards require more time to set up the reference clock, they should change this through local patches or add a proper, configurable synchronization mechanism. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03usb: misc: usb3503: Fix up whitespaceJulius Werner1-1/+1
Remove an erroneous tab that should be a space. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30usb: misc: usb3503: Adding device tree entry 'disabled-ports'Dongjin Kim1-0/+14
This patch is to add a property 'disabled-ports' representing the unused port of USB3503. USB3503 can support up to 3 USB host port and each ports can be controlled to be enabled or disabled. Do not describe this property if all ports must be enabled. You can represent the ports to disable in the device tree. usb3503@08{ ... disabled-ports = <2 3>; ... }; Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30usb: misc: usb3503: Add to select the ports to disableDongjin Kim1-9/+10
This patch is to disable the USB ports unconnected to USB3503. In order to disable the port, 'port_off_mask' must be set. * Disable PORT1 only .port_off_mask = USB3503_OFF_PORT1; * Disable PORT1 and PORT3 only .port_off_mask = USB3503_OFF_PORT1 | USB3503_OFF_PORT3; * Enables all ports .port_off_mask = 0; Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15USB: misc: usb3503: use module_i2c_driver to simplify the codeWei Yongjun1-12/+1
Use the module_i2c_driver() macro to make the code smaller and a bit simpler. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25USB: misc: usb3503: Fix compiler warningDongjin Kim1-1/+1
This patch fixes the compiler warning of uninitialized variable. drivers/usb/misc/usb3503.c: In function ‘usb3503_probe’: drivers/usb/misc/usb3503.c:215:13: warning: ‘mode’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24USB: misc: usb3503: add dt supportDongjin Kim1-5/+26
Added device tree support for usb3503 driver and add new document with device tree binding information. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: misc: fixup smatch WARNINGDongjin Kim1-4/+5
This patch fixes the warning, 6a099c63650e50ebf7d1259b859a3d230aec4207 [4/10] USB: misc: Add USB3503 High-Speed Hub Controller drivers/usb/misc/usb3503.c:238 usb3503_probe() error: we previously assumed 'pdata' could be null (see line 196) Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17usb: misc: usb3503_probe() can be staticFengguang Wu1-1/+1
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: misc: Add USB3503 High-Speed Hub ControllerDongjin Kim1-0/+303
This patch adds new driver of SMSC USB3503 USB 2.0 hub controller with HSIC upstream connectivity and three USB 2.0 downstream ports. The specification can be found from 'http://www.smsc.com/index.php?tid=295&pid=325'. The current version have been tested very basic features switching the modes, HUB-MODE and STANDBY-MODE. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-06 12:07:42 +0000