summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2016-05-20Merge tag 'usb-4.7-rc1' of ↵Linus Torvalds19-502/+287
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big pull request for USB and PHY drivers for 4.7-rc1 Full details in the shortlog, but it's the normal major gadget driver updates, phy updates, new usbip code, as well as a bit of lots of other stuff. All have been in linux-next with no reported issues" * tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits) USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support USB: serial: fix minor-number allocation USB: serial: quatech2: fix use-after-free in probe error path USB: serial: mxuport: fix use-after-free in probe error path USB: serial: keyspan: fix debug and error messages USB: serial: keyspan: fix URB unlink USB: serial: keyspan: fix use-after-free in probe error path USB: serial: io_edgeport: fix memory leaks in probe error path USB: serial: io_edgeport: fix memory leaks in attach error path usb: Remove unnecessary space before operator ','. usb: Remove unnecessary space before open square bracket. USB: FHCI: avoid redundant condition usb: host: xhci-rcar: Avoid long wait in xhci_reset() usb/host/fotg210: remove dead code in create_sysfs_files usb: wusbcore: Do not initialise statics to 0. usb: wusbcore: Remove space before ',' and '(' . USB: serial: cp210x: clean up CRTSCTS flag code USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code USB: serial: cp210x: fix hardware flow-control disable USB: serial: option: add even more ZTE device ids ...
2016-05-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2-250/+0
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.7. Here's the summary of the changes: - ATH79: Support for DTB passuing using the UHI boot protocol - ATH79: Remove support for builtin DTB. - ATH79: Add zboot debug serial support. - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega and DPT-Module. - ATH79: Update devicetree clock support for AR9132 and AR9331. - ATH79: Cleanup the DT code. - ATH79: Support newer SOCs in ath79_ddr_ctrl_init. - ATH79: Fix regression in PCI window initialization. - BCM47xx: Move SPROM driver to drivers/firmware/ - BCM63xx: Enable partition parser in defconfig. - BMIPS: BMIPS5000 has I cache filing from D cache - BMIPS: BMIPS: Add cpu-feature-overrides.h - BMIPS: Add Whirlwind support - BMIPS: Adjust mips-hpt-frequency for BCM7435 - BMIPS: Remove maxcpus from BCM97435SVMB DTS - BMIPS: Add missing 7038 L1 register cells to BCM7435 - BMIPS: Various tweaks to initialization code. - BMIPS: Enable partition parser in defconfig. - BMIPS: Cache tweaks. - BMIPS: Add UART, I2C and SATA devices to DT. - BMIPS: Add BCM6358 and BCM63268support - BMIPS: Add device tree example for BCM6358. - BMIPS: Improve Improve BCM6328 and BCM6368 device trees - Lantiq: Add support for device tree file from boot loader - Lantiq: Allow build with no built-in DT. - Loongson 3: Reserve 32MB for RS780E integrated GPU. - Loongson 3: Fix build error after ld-version.sh modification - Loongson 3: Move chipset ACPI code from drivers to arch. - Loongson 3: Speedup irq processing. - Loongson 3: Add basic Loongson 3A support. - Loongson 3: Set cache flush handlers to nop. - Loongson 3: Invalidate special TLBs when needed. - Loongson 3: Fast TLB refill handler. - MT7620: Fallback strategy for invalid syscfg0. - Netlogic: Fix CP0_EBASE redefinition warnings - Octeon: Initialization fixes - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig - Octeon: Correctly handle endian-swapped initramfs images. - Octeon: Support CN73xx, CN75xx and CN78xx. - Octeon: Remove dead code from cvmx-sysinfo. - Octeon: Extend number of supported CPUs past 32. - Octeon: Remove some code limiting NR_IRQS to 255. - Octeon: Simplify octeon_irq_ciu_gpio_set_type. - Octeon: Mark some functions __init in smp.c - Octeon: Octeon: Add Octeon III CN7xxx interface detection - PIC32: Add serial driver and bindings for it. - PIC32: Add PIC32 deadman timer driver and bindings. - PIC32: Add PIC32 clock timer driver and bindings. - Pistachio: Determine SoC revision during boot - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER. - Sibyte: Strip redundant comments from bcm1480_regs.h. - Panic immediately if panic_on_oops is set. - module: fix incorrect IS_ERR_VALUE macro usage. - module: Make consistent use of pr_* - Remove no longer needed work_on_cpu() call. - Remove CONFIG_IPV6_PRIVACY from defconfigs. - Fix registers of non-crashing CPUs in dumps. - Handle MIPSisms in new vmcore_elf32_check_arch. - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work. - Allow RIXI to be used on non-R2 or R6 cores. - Reserve nosave data for hibernation - Fix siginfo.h to use strict POSIX types. - Don't unwind user mode with EVA. - Fix watchpoint restoration - Ptrace watchpoints for R6. - Sync icache when it fills from dcache - I6400 I-cache fills from dcache. - Various MSA fixes. - Cleanup MIPS_CPU_* definitions. - Signal: Move generic copy_siginfo to signal.h - Signal: Fix uapi include in exported asm/siginfo.h - Timer fixes for sake of KVM. - XPA TLB refill fixes. - Treat perf counter feature - Update John Crispin's email address - Add PIC32 watchdog and bindings. - Handle R10000 LL/SC bug in set_pte() - cpufreq: Various fixes for Longson1. - R6: Fix R2 emulation. - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes - ELF: ABI and FP fixes. - Allow for relocatable kernel and use that to support KASLR. - Fix CPC_BASE_ADDR mask - Plenty fo smp-cps, CM, R6 and M6250 fixes. - Make reset_control_ops const. - Fix kernel command line handling of leading whitespace. - Cleanups to cache handling. - Add brcm, bcm6345-l1-intc device tree bindings. - Use generic clkdev.h header - Remove CLK_IS_ROOT usage. - Misc small cleanups. - CM: Fix compilation error when !MIPS_CM - oprofile: Fix a preemption issue - Detect DSP ASE v3 support:1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits) MIPS: pic32mzda: fix getting timer clock rate. MIPS: ath79: fix regression in PCI window initialization MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs MIPS: Fix VZ probe gas errors with binutils <2.24 MIPS: perf: Fix I6400 event numbers MIPS: DEC: Export `ioasic_ssr_lock' to modules MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC MIPS: CM: Fix compilation error when !MIPS_CM MIPS: Fix genvdso error on rebuild USB: ohci-jz4740: Remove obsolete driver MIPS: JZ4740: Probe OHCI platform device via DT MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant MIPS: pistachio: Determine SoC revision during boot MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435 mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type MIPS: Prevent "restoration" of MSA context in non-MSA kernels MIPS: cevt-r4k: Dynamically calculate min_delta_ns MIPS: malta-time: Take seconds into account MIPS: malta-time: Start GIC count before syncing to RTC MIPS: Force CPUs to lose FP context during mode switches ...
2016-05-18Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+1341
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...
2016-05-13USB: ohci-jz4740: Remove obsolete driverMaarten ter Huurne2-250/+0
The ohci-platform driver can control the clock, while usb-nop-xceiv as the PHY can control the vbus regulator. So this JZ4740-specific glue is not needed anymore. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13105/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09USB: FHCI: avoid redundant conditionHeinrich Schuchardt1-1/+1
The right part of the following or expression is only evaluated if td is nonzero. !td || (td && td.status == USB_TD_INPROGRESS) So no need to check td again. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09usb: host: xhci-rcar: Avoid long wait in xhci_reset()Yoshihiro Shimoda1-1/+2
The firmware of R-Car USB 3.0 host controller will control the reset. So, if the xhci driver doesn't do firmware downloading (e.g. kernel configuration is CONFIG_USB_XHCI_PLATFORM=y and CONFIG_USB_XHCI_RCAR is not set), the reset of USB 3.0 host controller doesn't work correctly. Then, the host controller will cause long wait in xhci_reset() because the CMD_RESET bit of op_regs->command is not cleared for 10 seconds. So, this patch modifies the Kconfig to enable both CONFIG_USB_XHCI_PLATFORM and CONFIG_USB_XHCI_RCAR. Fixes: 4ac8918f3a7 (usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers) Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09usb/host/fotg210: remove dead code in create_sysfs_filesColin Ian King1-7/+1
The goto in create_sysfs_files is never executed, so remove it and clean up the code. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-29USB: EHCI: make all debugging depend on CONFIG_DYNAMIC_DEBUGAlan Stern1-52/+34
The debugging facilities in ehci-dbg.c follow an uneven pattern. Some of them are protected by "#ifdef CONFIG_DYNAMIC_DEBUG" and some aren't, presumably in the hope of having some of the debugging output available in any configuration. This leads to build problems when dynamic debugging isn't configured. Rather than try to keep this complicated state of affairs, let's just make everything dependent on CONFIG_DYNAMIC_DEBUG. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-29usb: xhci: tegra: Add Tegra210 supportThierry Reding1-8/+51
Parameterize more parts of the driver and add support for Tegra210. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29usb: xhci: Add NVIDIA Tegra XUSB controller driverThierry Reding3-0/+1298
Add support for the on-chip XUSB controller present on Tegra SoCs. This controller, when loaded with external firmware, exposes an interface compliant with xHCI. This driver loads the firmware, starts the controller, and is able to service host-specific messages sent by the controller's firmware. The controller also supports USB device mode as well as powergating of the SuperSpeed and host-controller logic when not in use, but support for these is not yet implemented. Based on work by: Ajay Gupta <ajayg@nvidia.com> Bharath Yadav <byadav@nvidia.com> Andrew Bresticker <abrestic@chromium.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-28usb/host/: const data must use __initconst not __initdataNicolas Pitre4-4/+4
Init data marked const should be annotated with __initconst for correctness and not __initdata. This also fixes LTO builds that otherwise fail with section mismatch errors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: hcd: do not call whc_clean_up on wch_init call failureColin Ian King1-3/+4
whc_init already calls whc_clean_up if an error occurs during the initialization, so calling it again if whc_init fails at the end of wch_probe will cause double free errors. Fix this by bailing out on an whc_init failure to a new label that avoids doing the duplicated whc_clean_up. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26USB: bcma: use simpler devm helper for getting vcc GPIORafał Miłecki1-4/+2
Thanks to switching to devm_gpiod_get: 1) We don't have to pass fwnode pointer 2) We can request initial GPIO value at getting call This was successfully tested on Netgear R6250 (BCM4708). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: host: xhci: plat: finally get rid of xhci_plat_type_is()Felipe Balbi2-21/+0
Now that there are no more users for xhci_plat_type_is(), we can safely remove it. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: host: xhci: plat: make use of new methods in xhci_plat_privFelipe Balbi1-28/+27
Now that the code has been refactored enough, switching over to using ->plat_start() and ->init_quirk() becomes a very simple patch. After this patch, there are no further uses for xhci_plat_type_is() which will be removed in a follow-up patch. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: host: xhci: plat: change type of mvebu init_quirk()Felipe Balbi3-7/+12
Just like RCAR's init_quirk() we want mvebu's to use struct usb_hcd * as argument too. This is another step towards removing xhci_plat_type_is(). Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: host: xhci: plat: move mvebu init_quirk() to xhci_plat_setup()Felipe Balbi1-6/+9
xhci_plat_setup() is the rightful place for xhci_mvebu_mbus_init_quirk(), so let's move it there in order to make it simpler to get rid of xhci_plat_type_is() later on. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: xhci: plat: add ->plat_start() and ->init_quirk() methodsFelipe Balbi1-0/+2
these two methods will be used to hide platform-specific details so we can get rid of xhci_plat_type_is() in a later patch. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: host: xhci: rcar: retire use of xhci_plat_type_is()Felipe Balbi1-1/+33
We're preparing to remove xhci_plat_type_is() in favor of a better approach where we define function pointers ahead of time. This will let us make assumptions about which platforms we're running on and which platform-specific functions we should call. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> [delete extra comma in function parameters -Mathias] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: xhci: remove duplicate code of interval checkingAlexandr Ivanov1-32/+21
Move duplicate code from xhci_queue_intr_tx() and xhci_queue_isoc_tx_prepare() to the check_interval() function. Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: xhci: remove duplicate function xhci_urb_to_transfer_ringAlexandr Ivanov3-53/+16
Remove duplicate function xhci_urb_to_transfer_ring from xhci.c. We have same function in xhci-ring.c. Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: xhci: merge xhci_queue_bulk_tx and queue_bulk_sg_tx functionsAlexandr Ivanov2-288/+121
In drivers/usb/host/xhci-ring.c there are two functions (xhci_queue_bulk_tx and queue_bulk_sg_tx) that are very similar, so a lot of code duplication. This patch merges these functions into to one xhci_queue_bulk_tx. Also counting the needed TRBs is merged and refactored. Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-19USB: whci-hcd: add more checks for dma mapping errorAlexey Khoroshilov1-2/+6
Fixing checks for dma mapping error in qset_fill_page_list(), I have missed two similar problems in qset_add_urb_sg() and in qset_add_urb_sg_linearize(). v2: check validity of dma_addr with dma_mapping_error() in qset_free_std() as suggested by Vladimir Zapolskiy. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-19xhci: fix typo in babble endpoint handling commentRajesh Bhagat1-1/+1
The 0.95 xHCI spec says that non-control endpoints will be halted if a babble is detected on a transfer. The 0.96 xHCI spec says all types of endpoints will be halted when a babble is detected. Some hardware that claims to be 0.95 compliant halts the control endpoint anyway. Reference: http://www.spinics.net/lists/linux-usb/msg21755.html Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero valuePeter Griffin1-1/+1
Otherwise generic-xhci and xhci-platform which have no data get wrongly detected as XHCI_PLAT_TYPE_MARVELL_ARMADA by xhci_plat_type_is(). This fixes a regression in v4.5 for STiH407 family SoC's which use the synopsis dwc3 IP, whereby the disable_clk error path gets taken due to wrongly being detected as XHCI_PLAT_TYPE_MARVELL_ARMADA and the hcd never gets added. I suspect this will also fix other dwc3 DT platforms such as Exynos, although I've only tested on STih410 SoC. Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv") Cc: stable@vger.kernel.org Cc: gregory.clement@free-electrons.com Cc: yoshihiro.shimoda.uh@renesas.com Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllersMathias Nyman4-4/+9
PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will remove the xhci controller from the PCI bus when the last USB device is disconnected. Add a flag to indicate that the host is being removed to avoid queueing configure_endpoint commands for the dropped endpoints. For PCI hotplugged controllers this will prevent 5 second command timeouts For static xhci controllers the configure_endpoint command is not needed in the removal case as everything will be returned, freed, and the controller is reset. For now the flag is only set for PCI connected host controllers. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: xhci: fix wild pointers in xhci_mem_cleanupLu Baolu1-0/+6
This patch fixes some wild pointers produced by xhci_mem_cleanup. These wild pointers will cause system crash if xhci_mem_cleanup() is called twice. Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB physYoshihiro Shimoda1-0/+13
This patch fixes an issue that cannot work if R-Car Gen2/3 run on above 4GB physical memory environment to use a quirk XHCI_NO_64BIT_SUPPORT. Cc: <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORTYoshihiro Shimoda2-0/+11
On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit address memory pointers actually. So, in this case, this driver should call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in xhci_gen_setup(). Otherwise, the xHCI controller will be died after a usb device is connected if it runs on above 4GB physical memory environment. So, this patch adds a new quirk XHCI_NO_64BIT_SUPPORT to resolve such an issue. Cc: <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13xhci: resume USB 3 roothub firstMathias Nyman1-3/+3
Give USB3 devices a better chance to enumerate at USB 3 speeds if they are connected to a suspended host. Solves an issue with NEC uPD720200 host hanging when partially enumerating a USB3 device as USB2 after host controller runtime resume. Cc: <stable@vger.kernel.org> Tested-by: Mike Murdoch <main.haarp@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 hostRafal Redzimski1-1/+3
Broxton B0 also requires XHCI_PME_STUCK_QUIRK. Adding PCI device ID for Broxton B and adding to quirk. Cc: <stable@vger.kernel.org> Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-17Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
2016-03-04Merge tag 'usb-for-v4.6' of ↵Greg Kroah-Hartman2-5/+2
http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb changes for v4.6 merge window This is almost all under drivers/usb/dwc2/. Many changes to the host side implementation of dwc2 have been done by Douglas Anderson. We also have USB 3.1 support added to the Gadget Framework and, because of that work, dwc3 got support to Synopsys new DWC_usb31 IP core. Other than these 2 important series, we also have the usual collection of non-critical fixes, Documentation updates, and minor changes all over the place.
2016-03-04usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbolArnd Bergmann2-5/+2
The USB_FSL_MPH_DR_OF symbol is used to ensure the code that interprets the DR device node is built whenever one of the two drivers (EHCI or UDC) for the platform is enabled. However, if CONFIG_USB is disabled and we only support gadget mode, this causes a Kconfig warning: warning: (USB_FSL_USB2) selects USB_FSL_MPH_DR_OF which has unmet direct dependencies (USB_SUPPORT && USB) We can avoid this warning by simply no longer using the symbol, and making sure we enter the drivers/usb/host/ directory when the UDC driver is enabled that needs the file, and then we use Makefile syntax to ensure the file is built-in if needed. There is currently a dependency on CONFIG_OF, but this is redundant, as we already know that this is set unconditionally for the platforms that use this driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-03usb: ohci: nxp: remove USB PLL and USB OTG clock managementVladimir Zapolskiy1-52/+10
LPC32xx common clock framework driver correctly manages parent clocks of USB OHCI clock, so there is no need to manually enable and disable them from the driver, which now depends only on a single USB host clock. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03usb: ohci: nxp: remove direct access to clock controller registersVladimir Zapolskiy1-18/+0
Direct access to clock control registers can be safely removed, the task of clock management is done by platform clock driver based on common clock framework. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03usb: ehci-atmel: use __maybe_unused to hide pm functionsArnd Bergmann1-4/+2
The ehci-atmel driver uses #ifdef to check for CONFIG_PM, but then uses SIMPLE_DEV_PM_OPS, which leaves the references out when CONFIG_PM_SLEEP is not defined, so we get a warning with PM=y && PM_SLEEP=n: drivers/usb/host/ehci-atmel.c:189:12: error: 'ehci_atmel_drv_suspend' defined but not used [-Werror=unused-function] drivers/usb/host/ehci-atmel.c:203:12: error: 'ehci_atmel_drv_resume' defined but not used [-Werror=unused-function] This removes the incorrect #ifdef and instead uses a __maybe_unused annotation to let the compiler know it can silently drop the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03usb: ohci-at91: use __maybe_unused to hide pm functionsArnd Bergmann1-5/+3
The ohci-at91 driver uses #ifdef to check for CONFIG_PM, but then uses SIMPLE_DEV_PM_OPS, which leaves the references out when CONFIG_PM_SLEEP is not defined, so we get a warning with PM=y && PM_SLEEP=n: drivers/usb/host/ohci-at91.c:587:1: error: 'ohci_hcd_at91_drv_suspend' defined but not used [-Werror=unused-function] drivers/usb/host/ohci-at91.c:631:12: error: 'ohci_hcd_at91_drv_resume' defined but not used [-Werror=unused-function] This removes the incorrect #ifdef and instead uses a __maybe_unused annotation to let the compiler know it can silently drop the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03usb: xhci-mtk: use __maybe_unused to hide pm functionsArnd Bergmann1-7/+3
The mediatek XHCI glue driver uses SET_SYSTEM_SLEEP_PM_OPS() to conditionally set the correct suspend/resume options, and also puts both the dev_pm_ops and the functions inside of an #ifdef testing for CONFIG_PM_SLEEP, but those functions then call other code that becomes unused: drivers/usb/host/xhci-mtk.c:135:12: error: 'xhci_mtk_host_disable' defined but not used [-Werror=unused-function] drivers/usb/host/xhci-mtk.c:313:13: error: 'usb_wakeup_enable' defined but not used [-Werror=unused-function] drivers/usb/host/xhci-mtk.c:321:13: error: 'usb_wakeup_disable' defined but not used [-Werror=unused-function] This replaces the #ifdef with __maybe_unused annotations so the compiler knows it can silently drop them instead of warning. For the DEV_PM_OPS definition, we can use an IS_ENABLED() check to avoid defining the structure when CONFIG_PM is not set without the #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03usb: host: unhide suspend/resume declarationsArnd Bergmann2-4/+0
There is no need to hide function declarations, and making these visible to the SoC specific host drivers lets us use __maybe_unused and IS_ENABLED() checks to control their use, rather than having to use #ifdef to hide all callers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03usb: host: Host drivers relying on DMA should depend on HAS_DMAGeert Uytterhoeven1-5/+4
If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/usb/host/xhci-plat-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/xhci-mtk.ko] undefined! ERROR: "dma_pool_destroy" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/ohci-platform.ko] undefined! ERROR: "dma_pool_destroy" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/host/ohci-hcd.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "dma_pool_destroy" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/host/fotg210-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/ehci-platform.ko] undefined! ERROR: "dma_pool_destroy" [drivers/usb/host/ehci-hcd.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/host/ehci-hcd.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/host/ehci-hcd.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/host/ehci-hcd.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/host/ehci-hcd.ko] undefined! Add dependencies on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03usb: host: xhci-plat: fix of_table.cocci warningsJulia Lawall1-0/+1
Make sure (of/i2c/platform)_device_id tables are NULL terminated Generated by: scripts/coccinelle/misc/of_table.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03usb: host: xhci-plat: add R-Car Gen2 and Gen3 fallback compatibility stringsSimon Horman1-0/+5
Add fallback compatibility strings for R-Car Gen2 and Gen3. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20usb: host: xhci-rcar: Use ARCH_RENESASSimon Horman1-1/+1
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-16gpio: Include linux/gpio.h instead of asm/gpio.hBjorn Helgaas1-2/+0
Most arches have an asm/gpio.h that merely includes linux/gpio.h. The others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected, linux/gpio.h includes asm/gpio.h. Therefore, code should include linux/gpio.h instead of including asm/gpio.h directly. Remove includes of asm/gpio.h, adding an include of linux/gpio.h when necessary. This is a follow-on to 7563bbf89d06 ("gpiolib/arches: Centralise bolierplate asm/gpio.h"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-14usb: host: pci_quirks: fix memory leak, by adding iounmapSaurabh Sengar1-1/+2
Added iounmap inorder to free memory mapped to pointer before returning Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-14usb: add HAS_IOMEM dependency to USB_ISP1362_HCDVegard Nossum1-0/+1
drivers/built-in.o: In function `isp1362_probe': /home/vegard/linux/drivers/usb/host/isp1362-hcd.c:2668: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-14usb: add HAS_IOMEM dependency to USB_OXU210HP_HCDVegard Nossum1-0/+1
drivers/built-in.o: In function `oxu_drv_probe': /home/vegard/linux/drivers/usb/host/oxu210hp-hcd.c:3821: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-14usb: add HAS_IOMEM dependency to USB_OHCI_HCDVegard Nossum1-0/+1
drivers/built-in.o: In function `ohci_platform_probe': /home/vegard/linux/drivers/usb/host/ohci-platform.c:246: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-14usb: add HAS_IOMEM dependency to USB_FOTG210_HCDVegard Nossum1-0/+1
drivers/built-in.o: In function `fotg210_hcd_probe': /home/vegard/linux/drivers/usb/host/fotg210-hcd.c:5637: undefined reference to `devm_ioremap_resource' Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 06:01:46 +0000