summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2021-05-13xhci: Add reset resume quirk for AMD xhci controller.Sandeep Singh1-1/+3
One of AMD xhci controller require reset on resume. Occasionally AMD xhci controller does not respond to Stop endpoint command. Once the issue happens controller goes into bad state and in that case controller needs to be reset. Cc: <stable@vger.kernel.org> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13usb: xhci: Increase timeout for HC haltMaximilian Luz1-2/+3
On some devices (specifically the SC8180x based Surface Pro X with QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding the xhci-hcd driver at some point later does not exhibit this behavior. To work around this, double XHCI_MAX_HALT_USEC, which also resolves this issue. Cc: <stable@vger.kernel.org> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci: Do not use GFP_KERNEL in (potentially) atomic contextChristophe JAILLET1-3/+3
'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be submitted in interrupt context" (see comment related to 'usb_submit_urb()' in 'drivers/usb/core/urb.c') So this flag should be used in all the calling chain. Up to now, 'xhci_check_maxpacket()' which is only called from 'xhci_urb_enqueue()', uses GFP_KERNEL. Be safe and pass the mem_flags to this function as well. Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci: Fix giving back cancelled URBs even if halted endpoint can't resetMathias Nyman1-5/+11
Commit 9ebf30007858 ("xhci: Fix halted endpoint at stop endpoint command completion") in 5.12 changes how cancelled URBs are given back. To cancel a URB xhci driver needs to stop the endpoint first. To clear a halted endpoint xhci driver needs to reset the endpoint. In rare cases when an endpoint halt (error) races with a endpoint stop we need to clear the reset before removing, and giving back the cancelled URB. The above change in 5.12 takes care of this, but it also relies on the reset endpoint completion handler to give back the cancelled URBs. There are cases when driver refuses to queue reset endpoint commands, for example when a link suddenly goes to an inactive error state. In this case the cancelled URB is never given back. Fix this by giving back the URB in the stop endpoint if queuing a reset endpoint command fails. Fixes: 9ebf30007858 ("xhci: Fix halted endpoint at stop endpoint command completion") CC: <stable@vger.kernel.org> # 5.12 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCIAbhijeet Rao1-1/+3
In the same way as Intel Tiger Lake TCSS (Type-C Subsystem) the Alder Lake TCSS xHCI needs to be runtime suspended whenever possible to allow the TCSS hardware block to enter D3cold and thus save energy. Cc: stable@vger.kernel.org Signed-off-by: Abhijeet Rao <abhijeet.rao@intel.com> Signed-off-by: Nikunj A. Dadhania <nikunj.dadhania@intel.com> Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: fotg210-hcd: Fix an error messageChristophe JAILLET1-2/+2
'retval' is known to be -ENODEV here. This is a hard-coded default error code which is not useful in the error message. Moreover, another error message is printed at the end of the error handling path. The corresponding error code (-ENOMEM) is more informative. So remove simplify the first error message. While at it, also remove the useless initialization of 'retval'. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: xhci-mtk: remove bus status checkChunfeng Yun1-41/+2
PM will take care of the status of child device, so no need check each port anymore. Suggested-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618555706-6810-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: remove unused membersChunfeng Yun1-3/+0
Now some members about phys and wakeup are not used anymore, remove them. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: use clock bulk to get clocksChunfeng Yun2-95/+24
Use clock bulk helpers to get/enable/disable clocks, meanwhile make sys_ck optional, then will be easier to handle clocks. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: add support runtime PMChunfeng Yun1-16/+124
A dedicated wakeup irq will be used to handle runtime suspend/resume, we use dev_pm_set_dedicated_wake_irq API to take care of requesting and attaching wakeup irq, then the suspend/resume framework will help to enable/disable wakeup irq. The runtime PM is default off since some platforms may not support it. users can enable it via power/control (set "auto") in sysfs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: check return value in suspend/resume hooksChunfeng Yun1-10/+27
Return error number if encounter errors during suspend and resume. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-10USB:ehci:fix Kunpeng920 ehci hardware problemLongfang Liu1-0/+3
Kunpeng920's EHCI controller does not have SBRN register. Reading the SBRN register when the controller driver is initialized will get 0. When rebooting the EHCI driver, ehci_shutdown() will be called. if the sbrn flag is 0, ehci_shutdown() will return directly. The sbrn flag being 0 will cause the EHCI interrupt signal to not be turned off after reboot. this interrupt that is not closed will cause an exception to the device sharing the interrupt. Therefore, the EHCI controller of Kunpeng920 needs to skip the read operation of the SBRN register. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Link: https://lore.kernel.org/r/1617958081-17999-1-git-send-email-liulongfang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09usb: host: u132-hcd: use DEFINE_MUTEX() for mutex lockZheng Yongjun1-2/+1
mutex lock can be initialized automatically with DEFINE_MUTEX() rather than explicitly calling mutex_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20210405101434.14878-1-zhengyongjun3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-06xhci: prevent double-fetch of transfer and transfer event TRBsMathias Nyman1-23/+19
The same values are parsed several times from transfer and event TRBs by different functions in the same call path, all while processing one transfer event. As the TRBs are in DMA memory and can be accessed by the xHC host we want to avoid this to prevent double-fetch issues. To resolve this pass the already parsed values to the different functions in the path of parsing a transfer event Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210406070208.3406266-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-06xhci: fix potential array out of bounds with several interruptersMathias Nyman1-1/+5
The Max Interrupters supported by the controller is given in a 10bit wide bitfield, but the driver uses a fixed 128 size array to index these interrupters. Klockwork reports a possible array out of bounds case which in theory is possible. In practice this hasn't been hit as a common number of Max Interrupters for new controllers is 8, not even close to 128. This needs to be fixed anyway Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210406070208.3406266-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-06xhci: check control context is valid before dereferencing it.Mathias Nyman1-0/+8
Don't dereference ctrl_ctx before checking it's valid. Issue reported by Klockwork Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210406070208.3406266-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-06xhci: check port array allocation was successful before dereferencing itMathias Nyman1-0/+3
return if rhub->ports is null after rhub->ports = kcalloc_node() Klockwork reported issue Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210406070208.3406266-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02usb: xhci-mtk: support quirk to disable usb2 lpmChunfeng Yun2-0/+4
The xHCI driver support usb2 HW LPM by default, here add support XHCI_HW_LPM_DISABLE quirk, then we can disable usb2 lpm when need it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02usb: xhci-mtk: fix broken streams issue on 0.96 xHCIChunfeng Yun1-1/+9
The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02usb: xhci-mtk: fix oops when unbind driverChunfeng Yun1-1/+3
The oops happens when unbind driver through sysfs as following, because xhci_mtk_drop_ep() try to drop the endpoint of root hub which is not added by xhci_add_endpoint() and the virtual device is not allocated, in fact also needn't drop it, so should skip it. Call trace: xhci_mtk_drop_ep+0x1b8/0x298 usb_hcd_alloc_bandwidth+0x1d8/0x380 usb_disable_device_endpoints+0x8c/0xe0 usb_disable_device+0x128/0x168 usb_disconnect+0xbc/0x2c8 usb_remove_hcd+0xd8/0x210 xhci_mtk_remove+0x98/0x108 platform_remove+0x28/0x60 device_release_driver_internal+0x110/0x1e8 device_driver_detach+0x18/0x28 unbind_store+0xd4/0x108 drv_attr_store+0x24/0x38 Fixes: 14295a150050 ("usb: xhci-mtk: support to build xhci-mtk-hcd.ko") Reported-by: Eddie Hung <eddie.hung@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1617179142-2681-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02usb: xhci-mtk: fix wrong remainder of bandwidth budgetChunfeng Yun1-5/+2
The remainder of the last bandwidth bugdget is wrong, it's the value alloacted in last bugdget, not unused. Reported-by: Yaqii Wu <Yaqii.Wu@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1617179142-2681-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-28usb: xhci-mtk: remove MODULE_ALIASChunfeng Yun1-1/+0
Since the driver only supports the devices created by the OF core, seems no need MODULE_ALIAS() anymore. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-9-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-28usb: xhci-mtk: drop CONFIG_OFChunfeng Yun1-3/+1
The driver can match only the devices created by the OF core via the DT table, so the table should be always used. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usb: xhci-mtk: add support ip-sleep wakeup for mT8192Chunfeng Yun1-0/+10
Add support ip-sleep wakeup for mT8192, it's a specific revision, and not following IPM rule. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usb: xhci-mtk: support ip-sleep wakeup for MT8183Chunfeng Yun1-0/+13
Add support ip-sleep wakeup for MT8183, it's similar to MT8173, and it's also a specific one, but not following IPM rule. Due to the index 2 already used by many DTS, it's better to keep it unchanged for backward compatibility, treat specific ones without following IPM rule as revision 1.x, meanwhile reserve 3~10 for later revision that follows the IPM rule. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: xhci: Remove unused functionThinh Nguyen1-147/+0
Now that we replaced the xhci_create_usb3_bos_desc() function. We can remove it along with the static usb_bos_descriptor structure. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ce0acbbd0bd3c3c3a08e6418ab3bdb431a44bbfd.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: xhci: Rewrite xhci_create_usb3_bos_desc()Thinh Nguyen1-2/+235
The current xhci_create_usb3_bos_desc() uses a static bos u8 array and various magic numbers and offsets making it difficult to extend support for USB 3.2. Let's rewrite this entire function to support dual-lane in USB 3.2. The hub driver matches the port speed ID from the extended port status to the SSID of the sublink speed attributes to detect if the device supports SuperSpeed Plus. Currently we don't provide the default gen1x2 and gen2x2 sublink speed capability descriptor for USB 3.2 roothub. The USB stack depends on this to detect and match the correct speed. In addition, if the xHCI host provides Protocol Speed ID (PSI) capability, then make sure to convert Protocol Speed ID Mantissa and Exponent (PSIM & PSIE) to lane speed for gen1x2 and gen2x2. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/19cd09b03f96346996270579fd27d38b8a6844aa.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: xhci: Fix port minor revisionThinh Nguyen1-0/+9
Some hosts incorrectly use sub-minor version for minor version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01 for bcdUSB 0x310). Currently the xHCI driver works around this by just checking for minor revision > 0x01 for USB 3.1 everywhere. With the addition of USB 3.2, checking this gets a bit cumbersome. Since there is no USB release with bcdUSB 0x301 to 0x309, we can assume that sub-minor version 01 to 09 is incorrect. Let's try to fix this and use the minor revision that matches with the USB/xHCI spec to help with the version checking within the driver. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ed330e95a19dc367819c5b4d78bf7a541c35aa0a.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: xhci: Init root hub SSP rateThinh Nguyen1-0/+2
Initialize USB 3.x root hub SuperSpeed Plus rate. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f1698a96d5f9dfaefb857b95e5db6135ae0c9e93.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: xhci: drop workaround for forced irq threadingJohan Hovold1-3/+2
Force-threaded interrupt handlers used to run with interrupts enabled, something which could lead to deadlocks in case a threaded handler shared a lock with code running in hard interrupt context (e.g. timer callbacks) and did not explicitly disable interrupts. Since commit 81e2073c175b ("genirq: Disable interrupts for force threaded handlers") interrupt handlers always run with interrupts disabled on non-RT so that drivers no longer need to do handle forced threading ("threadirqs"). Drop the now obsolete workaround added by commit 63aea0dbab90 ("USB: xhci: fix lock-inversion problem"). Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322111140.32056-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23drivers: usb: host: fotg210-hcd.c: Fix alignment of commentShubhankar Kuranagatti1-1/+1
The * has been aligned on each line for block comment. Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210311190901.gaw7m7ndib3uzakm@kewl-virtual-machine Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23drivers: usb: host: fotg210-hcd.c: Fix indentation errorShubhankar Kuranagatti1-5/+5
A space was given after tab key. The extra space has been removed. This is done to maintain uniformity in the code. Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210311190058.yudmivcbok56itay@kewl-virtual-machine Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: sl811-hcd: improve misleading indentationArnd Bergmann1-5/+4
gcc-11 now warns about a confusingly indented code block: drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’: drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] 1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ | ^~ drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 1295 | break; Rewrite this to use a single if() block with the __is_defined() macro. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210322164244.827589-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: ehci: drop workaround for forced irq threadingJohan Hovold1-10/+3
Force-threaded interrupt handlers used to run with interrupts enabled, something which could lead to deadlocks in case a threaded handler shared a lock with code running in hard interrupt context (e.g. timer callbacks) and did not explicitly disable interrupts. Since commit 81e2073c175b ("genirq: Disable interrupts for force threaded handlers") interrupt handlers always run with interrupts disabled on non-RT so that drivers no longer need to do handle forced threading ("threadirqs"). Drop the now obsolete workaround added by commit a1227f3c1030 ("usb: ehci: fix deadlock when threadirqs option is used"). Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322111249.32141-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: host: ehci-tegra: Select USB_GADGET Kconfig optionDmitry Osipenko1-0/+1
Select USB_GADGET Kconfig option in order to fix build failure which happens because ChipIdea driver has a build dependency on both USB_GADGET and USB_EHCI_HCD, while USB_EHCI_TEGRA force-selects the ChipIdea driver without taking into account the tristate USB_GADGET dependency. It's not possible to do anything about the cyclic dependency of the Kconfig options, but USB_EHCI_TEGRA is now a deprecated option that isn't used by defconfigs and USB_GADGET is wanted on Tegra by default, hence it's okay to have a bit clunky workaround for it. Fixes: c3590c7656fb ("usb: host: ehci-tegra: Remove the driver") Reported-by: kernel test robot <lkp@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210320151915.7566-2-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: host: ehci-platform: add spurious_oc DT supportÁlvaro Fernández Rojas1-0/+3
Over-current reporting isn't supported on some platforms such as bcm63xx. These devices will incorrectly report over-current if this flag isn't properly activated. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210223174455.1378-4-noltari@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: ehci: add spurious flag to disable overcurrent checkingFlorian Fainelli4-3/+6
This patch adds an ignore_oc flag which can be set by EHCI controller not supporting or wanting to disable overcurrent checking. The EHCI platform data in include/linux/usb/ehci_pdriver.h is also augmented to take advantage of this new flag. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210223174455.1378-2-noltari@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-18usb: host: Mundane spello fix in the file sl811_cs.cBhaskar Chowdhury1-1/+1
s/seting/setting/ Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210316045243.3500228-1-unixbhaskar@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-15Merge 5.12-rc3 into usb-nextGreg Kroah-Hartman4-38/+57
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11xhci: Fix repeated xhci wake after suspend due to uncleared internal wake stateMathias Nyman1-32/+30
If port terminations are detected in suspend, but link never reaches U0 then xHCI may have an internal uncleared wake state that will cause an immediate wake after suspend. This wake state is normally cleared when driver clears the PORT_CSC bit, which is set after a device is enabled and in U0. Write 1 to clear PORT_CSC for ports that don't have anything connected when suspending. This makes sure any pending internal wake states in xHCI are cleared. Cc: stable@vger.kernel.org Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210311115353.2137560-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11usb: xhci: Fix ASMedia ASM1042A and ASM3242 DMA addressingForest Crossman1-2/+6
I've confirmed that both the ASMedia ASM1042A and ASM3242 have the same problem as the ASM1142 and ASM2142/ASM3142, where they lose some of the upper bits of 64-bit DMA addresses. As with the other chips, this can cause problems on systems where the upper bits matter, and adding the XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue. Cc: stable@vger.kernel.org Signed-off-by: Forest Crossman <cyrozap@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210311115353.2137560-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11xhci: Improve detection of device initiated wake signal.Mathias Nyman1-3/+13
A xHC USB 3 port might miss the first wake signal from a USB 3 device if the port LFPS reveiver isn't enabled fast enough after xHC resume. xHC host will anyway be resumed by a PME# signal, but will go back to suspend if no port activity is seen. The device resends the U3 LFPS wake signal after a 100ms delay, but by then host is already suspended, starting all over from the beginning of this issue. USB 3 specs say U3 wake LFPS signal is sent for max 10ms, then device needs to delay 100ms before resending the wake. Don't suspend immediately if port activity isn't detected in resume. Instead add a retry. If there is no port activity then delay for 120ms, and re-check for port activity. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210311115353.2137560-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11usb: xhci: do not perform Soft Retry for some xHCI hostsStanislaw Gruszka3-1/+8
On some systems rt2800usb and mt7601u devices are unable to operate since commit f8f80be501aa ("xhci: Use soft retry to recover faster from transaction errors") Seems that some xHCI controllers can not perform Soft Retry correctly, affecting those devices. To avoid the problem add xhci->quirks flag that restore pre soft retry xhci behaviour for affected xHCI controllers. Currently those are AMD_PROMONTORYA_4 and AMD_PROMONTORYA_2, since it was confirmed by the users: on those xHCI hosts issue happen and is gone after disabling Soft Retry. [minor commit message rewording for checkpatch -Mathias] Fixes: f8f80be501aa ("xhci: Use soft retry to recover faster from transaction errors") Cc: <stable@vger.kernel.org> # 4.20+ Reported-by: Bernhard <bernhard.gebetsberger@gmx.at> Tested-by: Bernhard <bernhard.gebetsberger@gmx.at> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202541 Link: https://lore.kernel.org/r/20210311115353.2137560-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: print debug info of endpoint intervalChunfeng Yun1-8/+29
Print bInterval and convert it into the time expressed in us or ms unit, this is the key info when allocate bandwidth failed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/f7a9fa7a812296fcd6c603bfa9853076144018d6.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: support to build xhci-mtk-hcd.koChunfeng Yun8-66/+64
Currently xhci-hcd.ko building depends on USB_XHCI_MTK, this is not flexible for some cases. For example: USB_XHCI_HCD is y, and USB_XHCI_MTK is m, then we can't implement extended functions if only update xhci-mtk.ko This patch is used to remove the dependence. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/0b62e21ddfacc1c2874726dd27ccab80c993f303.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: remove declaration of xhci_mtk_setup()Chunfeng Yun1-9/+8
Move xhci_driver_overrides struct variable after definition of xhci_mtk_setup(), then we can remove it's declaration. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/cf627d611a5c59508371cc3360cb402b70825fd8.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: add some schedule error numberChunfeng Yun1-9/+35
This is used to provide more information about which case causes bandwidth schedule failure. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/9771f44093053b581e9c4be4b7fb68d9fcecad08.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: rebuild the way to get bandwidth domainChunfeng Yun1-18/+11
Rebuild the function get_bw_index(), get the bandwidth domain directly instead its index of domain array. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/de618970301702c57bd352bf87df48bc17c699dd.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: use @tt_info to check the FS/LS device is under a HS hubChunfeng Yun1-6/+2
If the LS/FS device is connected to an external HS hub, the member @tt_info in xhci_virt_device struct in not NULL, use it to check whether a LS/FS device is under an exernal HS hub, then no need get the slot context of this device. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/8117df52f16bd03087e486d7d740a183b6dd634a.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: add a member @speed in mu3h_sch_ep_info structChunfeng Yun2-19/+19
This is used to drop parameter @udev for some functions, meanwhile remove some unused @udev parameter. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/cda0833e44d6027cc8fdee1e29ce2b5b2a6ac03d.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-09 23:40:54 +0000