summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2017-03-11Merge tag 'usb-4.11-rc2' of ↵Linus Torvalds5-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here is a number of different USB fixes for 4.11-rc2. Seems like there were a lot of unresolved issues that people have been finding for this subsystem, and a bunch of good security auditing happening as well from Johan Hovold. There's the usual batch of gadget driver fixes and xhci issues resolved as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers usb: host: xhci-dbg: HCIVERSION should be a binary number usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct usb: xhci-mtk: check hcc_params after adding primary hcd USB: serial: digi_acceleport: fix OOB-event processing MAINTAINERS: usb251xb: remove reference inexistent file doc: dt-bindings: usb251xb: mark reg as required usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time usb: usb251xb: remove max_{power,current}_{sp,bp} properties usb-storage: Add ignore-residue quirk for Initio INIC-3619 USB: iowarrior: fix NULL-deref in write USB: iowarrior: fix NULL-deref at probe usb: phy: isp1301: Add OF device ID table usb: ohci-at91: Do not drop unhandled USB suspend control requests USB: serial: safe_serial: fix information leak in completion handler USB: serial: io_ti: fix information leak in completion handler USB: serial: omninet: drop open callback USB: serial: omninet: fix reference leaks at open USB: serial: io_ti: fix NULL-deref in interrupt callback usb: dwc3: gadget: make to increment req->remaining in all cases ...
2017-03-09scripts/spelling.txt: add "disble(d)" pattern and fix typo instancesMasahiro Yamada1-2/+2
Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllersGuenter Roeck1-0/+2
Upstream commit 98d74f9ceaef ("xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI xhci controllers which can result in excessive timeouts, to the point where the system reports a deadlock. The same problem is seen with hot pluggable xhci controllers using the xhci-plat driver, such as the driver used for Type-C ports on rk3399. Similar to hot-pluggable PCI controllers, the driver for this chip removes the xhci controller from the system when the Type-C cable is disconnected. The solution for PCI devices works just as well for non-PCI devices and avoids the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: host: xhci-dbg: HCIVERSION should be a binary numberPeter Chen1-1/+1
According to xHCI spec, HCIVERSION containing a BCD encoding of the xHCI specification revision number, 0100h corresponds to xHCI version 1.0. Change "100" as "0x100". Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable <stable@vger.kernel.org> Fixes: 04abb6de2825 ("xhci: Read and parse new xhci 1.1 capability register") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: xhci: remove dummy extra_priv_size for size of xhci_hcd structChunfeng Yun2-2/+0
because hcd_priv_size is already size of xhci_hcd struct, extra_priv_size is not needed anymore for MTK and tegra drivers. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: xhci-mtk: check hcc_params after adding primary hcdChunfeng Yun1-3/+3
hcc_params is set in xhci_gen_setup() called from usb_add_hcd(), so checks the Maximum Primary Stream Array Size in the hcc_params register after adding primary hcd. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: ohci-at91: Do not drop unhandled USB suspend control requestsJelle Martijn Kok1-2/+2
In patch 2e2aa1bc7eff90ecm, USB suspend and wakeup control requests are passed to SFR_OHCIICR register. If a processor does not have such a register, this hub control request will be dropped. If no such a SFR register is available, all USB suspend control requests will now be processed using ohci_hub_control() (like before patch 2e2aa1bc7eff90ecm.) Tested on an Atmel AT91SAM9G20 with an on-board TI TUSB2046B hub chip If the last USB device is unplugged from the USB hub, the hub goes into sleep and will not wakeup when an USB devices is inserted. Fixes: 2e2aa1bc7eff90ec ("usb: ohci-at91: Forcibly suspend ports while USB suspend") Signed-off-by: Jelle Martijn Kok <jmkok@youcom.nl> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-27lib/vsprintf.c: remove %Z supportAlexey Dobriyan3-3/+3
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-10ohci-hub: fix typo in dbg_port macroJelle Martijn Kok1-13/+13
The "dbg_port" macro uses the "outside" parameter (="temp") instead of the parameters (="value") given in the macro. As the macro can look outside its definition this causes no direct problem. Signed-off-by: Jelle Martijn Kok <jmkok@youcom.nl> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-08usb: xhci-mtk: make the reference clock optionalChunfeng Yun1-2/+9
Make the reference clock optional for DTS backward compatibility and ignore the error if it does not exist. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: refactor xhci_urb_enqueueMathias Nyman1-56/+37
Use switch instead of several if statements Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: simplify how we store TDs in urb private dataMathias Nyman4-33/+18
Instead of storing a zero length array of td pointers, and then allocate memory both for the td pointer array and the td's, just use a zero length array of actual td's in urb private data. old: struct urb_priv { struct xhci_td *td[0] } new: struct urb_priv { struct xhci_td td[0] } Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: Rename variables related to transfer descritporsMathias Nyman3-14/+14
urb_priv structure has a count on how many TDs the URB contains, and how many of those TD's we have handled. rename: length -> num_tds td_cnt -> num_tds_done No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: rename size variable to num_tdsMathias Nyman1-8/+8
No functinal changes. num_tds describes the number of transfer descriptor better than "size" Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: add xhci_virt_device tracerFelipe Balbi4-0/+67
Let's start tracing at least part of an xhci_virt_device lifetime. We might want to extend this tracepoint class later, but for now it already exposes quite a bit of valuable information. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: remove newline from tracerFelipe Balbi1-1/+1
If we add that newline, the output will look like the following: kworker/2:1-42 [002] .... 169.811435: xhci_address_ctx: ctx_64=0, ctx_type=2, ctx_dma=@153fbd000, ctx_va=@ffff880153fbd000 We would rather have that in a single line. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: convert several if() to a single switch statementFelipe Balbi1-4/+6
when getting endpoint type, a switch statement looks better than a series of if () branches. There are no functional changes with this patch, cleanup only. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: add urb_enqueue/dequeue/giveback tracersFelipe Balbi3-0/+76
These three new tracers will help us tie TRBs into URBs by *also* looking into URB lifetime. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: make a generic TRB tracerFelipe Balbi3-23/+375
instead of having a tracer that can only trace command completions, let's promote this tracer so it can trace and decode any TRB. With that, it will be easier to extrapolate the lifetime of any TRB which might help debugging certain issues. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: combine event TRB completion debugging messagesFelipe Balbi1-0/+80
If we just provide a helper to convert completion code to string, we can combine all debugging messages into a single print. [keep the old debug messages, for warn and grep -Mathias] Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: convert to list_for_each_entry_safe()Felipe Balbi1-7/+8
instead of using while(!list_empty()) followed by list_first_entry(), we can actually use list_for_each_entry_safe(). Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: use the trb_to_noop() helper for command trbsMathias Nyman1-10/+2
Remove duplicate code by using trb_to_noop() when handling Aborted commads Based on earlier code by Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: Introduce helper to turn one TRB into a no-opMathias Nyman1-12/+17
Useful for turning both transfer and command trbs into no-ops. Based on earlier code by Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: unconditionally call xhci_unmap_td_bounce_buffer()Felipe Balbi1-6/+3
xhci_unmap_td_bounce_buffer() already checks for a valid td->bounce_seg and bails out early if that's invalid. There's no need to check for this twice. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: check for a valid ring when unmapping bounce bufferFelipe Balbi1-1/+1
This way we can remove checks for valid ring from call sites of xhci_unmap_td_bounce_buffer() Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: remove bogus __releases()/__acquires() annotationFelipe Balbi1-2/+0
handle_tx_event() is not releasing xhci->lock nor reacquiring it, remove the bogus annotation. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: introduce xhci_td_cleanup()Felipe Balbi1-42/+50
By extracting xhci_td_cleanup() from finish_td(), code before clearer and easier to follow. There are no functional changes with this patch. It's merely a cleanup. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: reorder variable definitionsFelipe Balbi1-8/+4
no functional changes. Simple cleanup to make sure variables are ordered in a 'reverse christmas tree' fashion. While at that, also remove an obsolete comment which doesn't apply anymore. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: use slightly better list helpersFelipe Balbi1-9/+10
Replace list_entry() with list_first_entry() and list_for_each() with list_for_each_entry(). This makes the code slightly more readable. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: remove unneded semicolonFelipe Balbi1-1/+1
it does no good, let's remove it. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: simplify irq handler returnFelipe Balbi1-15/+17
Instead of having several return points, let's use a local variable and a single place to return. This makes the code slightly easier to read. [set ret = IRQ_HANDLED in default working case -Mathias] Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: rename completion codes to match specFelipe Balbi4-157/+124
Cleanup only. This patch is a mechaninal rename to make sure our macros for TRB completion codes match what the specification uses to refer to such errors. The idea behind this is that it makes it far easier to grep the specification and match it with implementation. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: print HCIVERSION on debugFelipe Balbi1-2/+0
When calling xhci_dbg_regs() we actually _do_ want to know XHCI's version. This might help figure out why certain problems only happen in some cases. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: change pre-increments to post-incrementsFelipe Balbi3-21/+21
This is a cleanup patch only, no functional changes. The idea is just to make sure for loops look the same all over the driver. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: remove unnecessary return in xhci_pci_setup()Lu Baolu1-5/+1
Remove the unnecessary return line in xhci_pci_setup(). Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: use list_is_singular for cmd_listLu Baolu1-3/+4
Use list_is_singular() to check if cmd_list has only one entry. [use list_empty() in queue command instead -Mathias] Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: avoid unnecessary calculationLu Baolu1-10/+10
No need to calculate remainder and length_field, if there is no data phase of a control transfer. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: remove unnecessary assignmentLu Baolu1-2/+0
Drop an unnecessary assignment in prepare_transfer(). Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci-plat: enable BROKEN_PED quirk if platform requestedFelipe Balbi1-0/+3
In case 'quirk-broken-port-ped' property is passed in via device property, we should enable the corresponding BROKEN_PED quirk flag for XHCI core. [rogerq@ti.com] Updated code from platform data to device property and added DT binding. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: add quirk flag for broken PED bitsFelipe Balbi2-0/+9
Some devices from Texas Instruments [1] suffer from a silicon bug where Port Enabled/Disabled bit should not be used to silence an erroneous device. The bug is so that if port is disabled with PED bit, an IRQ for device removal (or attachment) will never fire. Just for the sake of completeness, the actual problem lies with SNPS USB IP and this affects all known versions up to 3.00a. A separate patch will be added to dwc3 to enabled this quirk flag if version is <= 3.00a. [1] - AM572x Silicon Errata http://www.ti.com/lit/er/sprz429j/sprz429j.pdf Section i896— USB xHCI Port Disable Feature Does Not Work Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: Put warning message on a single lineAlexander Stein1-2/+1
This allows someone to grep for the complete warning message as in; xhci-hcd xhci-hcd.0.auto: USB core suspending device not in U0/U1/U2. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: Remove unused 'addr_64' variable in xhci_hcd structureBaolin Wang1-1/+0
Since the 'addr_64' variable as legacy is unused now, then remove it from xhci_hcd structure. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: remove unnecessary second abort tryLu Baolu1-13/+5
The second try was a workaround for (what we thought was) command ring failing to stop in the first place. But this turns out to be due to the race that we have fixed(see "xhci: Fix race related to abort operation"). With that fix, it is time to remove the second try. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: remove unnecessary check for pending timerMathias Nyman1-2/+1
Checking if the command timeout timer is pending when queueing the first command to the command ring is not really useful, remove it. Suggested-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: detect stop endpoint race using pending timer instead of counter.Mathias Nyman3-18/+11
A counter was used to find out if the stop endpoint completion raced with the stop endpoint timeout timer. This was needed in case the stop ep completion failed to delete the timer as it was running on anoter cpu. The EP_STOP_CMD_PENDING flag was not enough as a new stop endpoint command may be queued between the command completion and timeout function, which would set the flag back. Instead of the separate counter that was used we can detect the race by checking both the STOP_EP_PENDING flag and timer_pending in the timeout function. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: rename EP_HALT_PENDING to EP_STOP_CMD_PENDINGMathias Nyman3-7/+7
We don't want to confuse halted and stalled endpoint states with a flag indicating we are waiting for a stop endpoint command to finish or timeout Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: simplify if statement to make it more readableMathias Nyman1-1/+2
No functional change, De Morgan !(A && B) = (!A || !B) Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25Merge 4.10-rc5 into usb-nextGreg Kroah-Hartman1-1/+1
We need the USB fixes in here as well to handle future merge issues and dependancies. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-20xhci: remove WARN_ON if dma mask is not set for platform devicesMathias Nyman1-1/+1
The warn on is a bit too much, we will anyway set the dma mask if not set previously. The main reason for this fix is that 4.10-rc1 has a dwc3 change that pass a parent sysdev dev pointer instead of setting the dma mask of its xhci platform device. xhci platform driver can then get more attributes from the sysdev than just the dma mask. The usb core and xhci changes are not yet in 4.10, and a fix like this was preferred instead of taking those big changes this late in the rc-cycle. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19usb: xhci-mtk: add reference clockChunfeng Yun2-0/+16
usually, the reference clock comes from 26M oscillator directly, but some SoCs are not, add it for compatibility. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-14 02:57:18 +0000