summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2019-05-22xhci: Use %zu for printing size_t typeFabio Estevam1-2/+2
Commit 597c56e372da ("xhci: update bounce buffer with correct sg num") caused the following build warnings: drivers/usb/host/xhci-ring.c:676:19: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'size_t {aka unsigned int}' [-Wformat=] Use %zu for printing size_t type in order to fix the warnings. Fixes: 597c56e372da ("xhci: update bounce buffer with correct sg num") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()Andrey Smirnov1-12/+10
Xhci_handshake() implements the algorithm already captured by readl_poll_timeout_atomic(). Convert the former to use the latter to avoid repetition. Turned out this patch also fixes a bug on the AMD Stoneyridge platform where usleep(1) sometimes takes over 10ms. This means a 5 second timeout can easily take over 15 seconds which will trigger the watchdog and reboot the system. [Add info about patch fixing a bug to commit message -Mathias] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Raul E Rangel <rrangel@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22xhci: Fix immediate data transfer if buffer is already DMA mappedMathias Nyman2-4/+8
xhci immediate data transfer (IDT) support in 5.2-rc1 caused regression on various Samsung Exynos boards with ASIX USB 2.0 ethernet dongle. If the transfer buffer in the URB is already DMA mapped then IDT should not be used. urb->transfer_dma will already contain a valid dma address, and there is no guarantee the data in urb->transfer_buffer is valid. The IDT support patch used urb->transfer_dma as a temporary storage, copying data from urb->transfer_buffer into it. Issue was solved by preventing IDT if transfer buffer is already dma mapped, and by not using urb->transfer_dma as temporary storage. Fixes: 33e39350ebd2 ("usb: xhci: add Immediate Data Transfer support") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22usb: xhci: avoid null pointer deref when bos field is NULLCarsten Schmid1-1/+1
With defective USB sticks we see the following error happen: usb 1-3: new high-speed USB device number 6 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: device descriptor read/64, error -71 usb 1-3: new high-speed USB device number 7 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: unable to get BOS descriptor set usb 1-3: New USB device found, idVendor=0781, idProduct=5581 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 This comes from the following place: [ 1660.215380] IP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.222092] PGD 0 P4D 0 [ 1660.224918] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 1660.425520] CPU: 1 PID: 38 Comm: kworker/1:1 Tainted: P U W O 4.14.67-apl #1 [ 1660.434277] Workqueue: usb_hub_wq hub_event [usbcore] [ 1660.439918] task: ffffa295b6ae4c80 task.stack: ffffad4580150000 [ 1660.446532] RIP: 0010:xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.453821] RSP: 0018:ffffad4580153c70 EFLAGS: 00010046 [ 1660.459655] RAX: 0000000000000000 RBX: ffffa295b4d7c000 RCX: 0000000000000002 [ 1660.467625] RDX: 0000000000000002 RSI: ffffffff984a55b2 RDI: ffffffff984a55b2 [ 1660.475586] RBP: ffffad4580153cc8 R08: 0000000000d6520a R09: 0000000000000001 [ 1660.483556] R10: ffffad4580a004a0 R11: 0000000000000286 R12: ffffa295b4d7c000 [ 1660.491525] R13: 0000000000010648 R14: ffffa295a84e1800 R15: 0000000000000000 [ 1660.499494] FS: 0000000000000000(0000) GS:ffffa295bfc80000(0000) knlGS:0000000000000000 [ 1660.508530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1660.514947] CR2: 0000000000000008 CR3: 000000025a114000 CR4: 00000000003406a0 [ 1660.522917] Call Trace: [ 1660.525657] usb_set_usb2_hardware_lpm+0x3d/0x70 [usbcore] [ 1660.531792] usb_disable_device+0x242/0x260 [usbcore] [ 1660.537439] usb_disconnect+0xc1/0x2b0 [usbcore] [ 1660.542600] hub_event+0x596/0x18f0 [usbcore] [ 1660.547467] ? trace_preempt_on+0xdf/0x100 [ 1660.552040] ? process_one_work+0x1c1/0x410 [ 1660.556708] process_one_work+0x1d2/0x410 [ 1660.561184] ? preempt_count_add.part.3+0x21/0x60 [ 1660.566436] worker_thread+0x2d/0x3f0 [ 1660.570522] kthread+0x122/0x140 [ 1660.574123] ? process_one_work+0x410/0x410 [ 1660.578792] ? kthread_create_on_node+0x60/0x60 [ 1660.583849] ret_from_fork+0x3a/0x50 [ 1660.587839] Code: 00 49 89 c3 49 8b 84 24 50 16 00 00 8d 4a ff 48 8d 04 c8 48 89 ca 4c 8b 10 45 8b 6a 04 48 8b 00 48 89 45 c0 49 8b 86 80 03 00 00 <48> 8b 40 08 8b 40 03 0f 1f 44 00 00 45 85 ff 0f 84 81 01 00 00 [ 1660.608980] RIP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] RSP: ffffad4580153c70 [ 1660.617921] CR2: 0000000000000008 Tracking this down shows that udev->bos is NULL in the following code: (xhci.c, in xhci_set_usb2_hardware_lpm) field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); <<<<<<< here xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); if (enable) { /* Host supports BESL timeout instead of HIRD */ if (udev->usb2_hw_lpm_besl_capable) { /* if device doesn't have a preferred BESL value use a * default one which works with mixed HIRD and BESL * systems. See XHCI_DEFAULT_BESL definition in xhci.h */ if ((field & USB_BESL_SUPPORT) && (field & USB_BESL_BASELINE_VALID)) hird = USB_GET_BESL_BASELINE(field); else hird = udev->l1_params.besl; The failing case is when disabling LPM. So it is sufficient to avoid access to udev->bos by moving the instruction into the "enable" clause. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22usb: xhci: Fix a potential null pointer dereference in ↵Jia-Ju Bai1-0/+3
xhci_debugfs_create_endpoint() In xhci_debugfs_create_slot(), kzalloc() can fail and dev->debugfs_private will be NULL. In xhci_debugfs_create_endpoint(), dev->debugfs_private is used without any null-pointer check, and can cause a null pointer dereference. To fix this bug, a null-pointer check is added in xhci_debugfs_create_endpoint(). This bug is found by a runtime fuzzing tool named FIZZER written by us. [subjet line change change, add potential -Mathais] Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22xhci: update bounce buffer with correct sg numHenry Lin1-4/+13
This change fixes a data corruption issue occurred on USB hard disk for the case that bounce buffer is used during transferring data. While updating data between sg list and bounce buffer, current implementation passes mapped sg number (urb->num_mapped_sgs) to sg_pcopy_from_buffer() and sg_pcopy_to_buffer(). This causes data not get copied if target buffer is located in the elements after mapped sg elements. This change passes sg number for full list to fix issue. Besides, for copying data from bounce buffer, calling dma_unmap_single() on the bounce buffer before copying data to sg list can avoid cache issue. Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-28/+14
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-05-08Merge tag 'usb-5.2-rc1' of ↵Linus Torvalds10-85/+237
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ...
2019-04-28Merge tag 'davinci-for-v5.2/soc' of ↵Olof Johansson1-28/+14
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/soc This update for DaVinci SoC support simplifies the VBUS enable and overcurrent handling code in DA8XX OHCI driver by modeling vbus GPIO as a regulator. This unifies code for all users, device tree and non-device-tree. The OHCI driver patches have been acked by its maintainer. * tag 'davinci-for-v5.2/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: usb: ohci-da8xx: drop the vbus GPIO ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx usb: ohci-da8xx: disable the regulator if the overcurrent irq fired usb: ohci-da8xx: let the regulator framework keep track of use count ARM: davinci: add missing sentinels to GPIO lookup tables Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-27usb: xhci: add endpoint context tracing when an endpoint is addedMathias Nyman2-0/+9
The configure endpoint command configures all the endpoints that were flagged to be added or dropped. To know the content of each of the added endpoints we need to add tracing to the .add_endpoint() callback, just after initializing all the context values. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27xhci: Add tracing for input control contextMathias Nyman3-0/+57
Add tracing for the add and drop bits in the input control context used in Address device, configure endpoint, evaluate context commands. The add and drop bits tell xHC which enpoints are added and dropped. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27xhci: add port and bus number to port dynamic debuggingMathias Nyman3-25/+48
Improve port related dynamic debugging by printing out the bus number, port number and port status register content each time there is a port related debug messages. Use the same port numbering method as usbcore to simplify debugging. i.e. starting with port number 1. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27usb: xhci: add Immediate Data Transfer supportNicolas Saenz Julienne3-0/+45
Immediate data transfers (IDT) allow the HCD to copy small chunks of data (up to 8bytes) directly into its output transfer TRBs. This avoids the somewhat expensive DMA mappings that are performed by default on most URBs submissions. In the case an URB was suitable for IDT. The data is directly copied into the "Data Buffer Pointer" region of the TRB and the IDT flag is set. Instead of triggering memory accesses the HC will use the data directly. The implementation could cover all kind of output endpoints. Yet Isochronous endpoints are bypassed as I was unable to find one that matched IDT's constraints. As we try to bypass the default DMA mappings on URB buffers we'd need to find a Isochronous device with an urb->transfer_buffer_length <= 8 bytes. The implementation takes into account that the 8 byte buffers provided by the URB will never cross a 64KB boundary. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: host: xhci-plat: get optional clock by devm_clk_get_optional()Chunfeng Yun1-21/+18
When the driver tries to get optional clock, it ignores all errors except -EPROBE_DEFER, but if only ignores -ENOENT, it will cover some real errors, such as -ENOMEM, so use devm_clk_get_optional() to get optional clock. Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: xhci-mtk: get optional clock by devm_clk_get_optional()Chunfeng Yun1-16/+3
Use devm_clk_get_optional() to get optional clock instead of optional_clk_get() which uses devm_clk_get() to get clock and checks for -EPROBE_DEFER but not -ENOENT as devm_clk_get_optional() does, in fact, only ignoring -ENOENT will cover more errors, so the replacement doesn't change original purpose. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: host: use usb_endpoint_maxp instead of usb_maxpacketYan Zhu1-6/+4
fhci_queue_urb() shouldn't use urb->pipe to compute the maxpacket size anyway.It should use usb_endpoint_maxp(&urb->ep->desc). Signed-off-by: Yan Zhu <zhuyan34@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16usb: host: xhci-tegra: Add Tegra186 XUSB supportJC Kuo1-0/+25
This commit adds Tegra186 XUSB host mode controller support. This is very similar to the existing support for Tegra124 and Tegra210, except that the number of ports and PHYs differs and the IPFS wrapper being gone. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16usb: host: xhci-tegra: Selectively program IPFSJC Kuo1-17/+26
Starting with Tegra186, the XUSB controller no longer has the IPFS wrapper. This commit adds a "has_ipfs" field to struct tegra_xusb_soc that can be used to declare the existence of the IPFS wrapper. For the existing chips (i.e. Tegra124 and Tegra210), the new field is set to true. A future patch adding support for Tegra186 will set it to false. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-12usb: ohci-da8xx: drop the vbus GPIOBartosz Golaszewski1-27/+5
All users now setup a fixed regulator for the vbus supply. We can drop the vbus GPIO code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-04-12usb: ohci-da8xx: disable the regulator if the overcurrent irq firedBartosz Golaszewski1-5/+17
Historically the power supply management in this driver has been handled in two separate places in parallel. Device-tree users simply defined an appropriate regulator, while two boards with no DT support (da830-evm and omapl138-hawk) passed functions defined in their respective board files over platform data. These functions simply used legacy GPIO calls to watch the oc GPIO for interrupts and disable the vbus GPIO when the irq fires. Commit d193abf1c913 ("usb: ohci-da8xx: add vbus and overcurrent gpios") updated these GPIO calls to the modern API and moved them inside the driver. This however is not the optimal solution for the vbus GPIO which should be modeled as a fixed regulator that can be controlled with a GPIO. In order to keep the overcurrent protection available once we move the board files to using fixed regulators we need to disable the enable_reg regulator when the overcurrent indicator interrupt fires. Since we cannot call regulator_disable() from interrupt context, we need to switch to using a oneshot threaded interrupt. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-04-12usb: ohci-da8xx: let the regulator framework keep track of use countBartosz Golaszewski1-6/+2
There's no reason to have a separate variable to keep track of the regulator state. The regulator core already does that. Remove reg_enabled from struct da8xx_ohci_hcd. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon1-2/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-01Merge 5.1-rc3 into usb-nextGreg Kroah-Hartman6-12/+33
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28usb: u132-hcd: fix resource leakMukesh Ojha1-0/+3
if platform_driver_register fails, cleanup the allocated resource gracefully. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: u132-hcd: fix potential NULL pointer dereferenceKangjie Lu1-0/+2
In case create_singlethread_workqueue fails, the fix notifies callers the error to avoid potential NULL pointer dereferences. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22xhci: Don't let USB3 ports stuck in polling state prevent suspendMathias Nyman2-7/+20
Commit 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") was intended to prevent ports that were still link training from being forced to U3 suspend state mid enumeration. This solved enumeration issues for devices with slow link training. Turns out some devices are stuck in the link training/polling state, and thus that patch will prevent suspend completely for these devices. This is seen with USB3 card readers in some MacBooks. Instead of preventing suspend, give some time to complete the link training. On successful training the port will end up as connected and enabled. If port instead is stuck in link training the bus suspend will continue suspending after 360ms (10 * 36ms) timeout (tPollingLFPSTimeout). Original patch was sent to stable, this one should go there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22usb: xhci: dbc: Don't free all memory with spinlock heldMathias Nyman1-2/+3
The xhci debug capability (DbC) feature did its memory cleanup with spinlock held. dma_free_coherent() warns if called with interrupts disabled move the memory cleanup outside the spinlock Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22xhci: Fix port resume done detection for SS ports with LPM enabledMathias Nyman1-3/+6
A suspended SS port in U3 link state will go to U0 when resumed, but can almost immediately after that enter U1 or U2 link power save states before host controller driver reads the port status. Host controller driver only checks for U0 state, and might miss the finished resume, leaving flags unclear and skip notifying usb code of the wake. Add U1 and U2 to the possible link states when checking for finished port resume. Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19usb: host: xhci-rcar: Add XHCI_TRUST_TX_LENGTH quirkYasushi Asano1-0/+1
When plugging BUFFALO LUA4-U3-AGT USB3.0 to Gigabit Ethernet LAN Adapter, warning messages filled up dmesg. [ 101.098287] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk? [ 101.117463] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk? [ 101.136513] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk? Adding the XHCI_TRUST_TX_LENGTH quirk resolves the issue. Signed-off-by: Yasushi Asano <yasano@jp.adit-jv.com> Signed-off-by: Spyridon Papageorgiou <spapageorgiou@de.adit-jv.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-3/+2
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-06Merge tag 'usb-5.1-rc1' of ↵Linus Torvalds17-75/+118
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...
2019-02-21usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCIBalaji Manoharan1-0/+1
This fix enables USB role feature on intel commercial nuc platform which is based on Kabylake chipset. Signed-off-by: Balaji Manoharan <m.balaji@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21usb: xhci: fix build warning - missing prototypeJean-Philippe Menil1-1/+1
Fix build warning when building drivers/usb/host/xhci-mem.o with W=1 due to missing prototype for xhci_free_virt_devices_depth_first. This function is only used in xhci-mem.c so just make it static. Signed-off-by: Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20usb: xhci: dbc: Fixing typo error.Prabhat Chand Pandey1-3/+3
Replaced "xhci_dbc_flush_reqests" with xhci_dbc_flush_requests". Signed-off-by: Prabhat Chand Pandey <prabhat.chand.pandey@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20usb: xhci: remove unused member 'parent' in xhci_regset structChunfeng Yun1-1/+0
The member @parent of xhci_regset struct is not used in fact, so remove it Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20xhci: tegra: Prevent error pointer dereferenceThierry Reding1-2/+2
During initialization, the host and super-speed power domains will contain an ERR_PTR() encoded error code rather than being NULL. To avoid a crash, use a !IS_ERR_OR_NULL() condition during cleanup. Signed-off-by: Thierry Reding <treding@nvidia.com> Fixes: 6494a9ad86de ("usb: xhci: tegra: Add genpd support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flagChristoph Hellwig2-3/+2
All users of dma_declare_coherent want their allocations to be exclusive, so default to exclusive allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19usb: host: oxu210hp-hcd: remove set but not used variables 'uframes, ↵YueHaibing1-7/+1
transfer_buffer_length' Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/host/oxu210hp-hcd.c: In function 'scan_periodic': drivers/usb/host/oxu210hp-hcd.c:2256:13: warning: variable 'uframes' set but not used [-Wunused-but-set-variable] drivers/usb/host/oxu210hp-hcd.c: In function 'oxu_urb_enqueue': drivers/usb/host/oxu210hp-hcd.c:2835:6: warning: variable 'transfer_buffer_length' set but not used [-Wunused-but-set-variable] They are never used since introduction. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-15Merge tag 'davinci-for-v5.1/soc-part2' of ↵Arnd Bergmann1-58/+60
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes DaVinci SoC updates for v5.1 (part 2) This pull request contains changes needed to help get rid of hard-coded GPIO base value passed from DaVinci platform data. The OHCI related changes also help by moving over-current support from board-files to OHCI driver making future DT-coversion easy. The OHCI parts are acked by its maintainer. * tag 'davinci-for-v5.1/soc-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: usb: ohci-da8xx: remove unused callbacks from platform data ARM: davinci: da830-evm: remove legacy usb helpers ARM: davinci: omapl138-hawk: remove legacy usb helpers usb: ohci-da8xx: add vbus and overcurrent gpios ARM: davinci: da830-evm: use gpio lookup entries for usb gpios ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios usb: ohci-da8xx: add a helper pointer to &pdev->dev usb: ohci-da8xx: add a new line after local variables ARM: davinci: da850-evm: use GPIO hogs instead of the legacy API ARM: davinci: mityomapl138: use device properties for at24 eeprom ARM: davinci: mityomapl138: use nvmem notifiers ARM: davinci: remove dead code related to MAC address reading ARM: davinci: sffsdr: use device properties for at24 eeprom ARM: davinci: sffsdr: fix the at24 eeprom device name ARM: davinci: dm646x-evm: use device properties for at24 eeprom ARM: davinci: dm644x-evm: use device properties for at24 eeprom ARM: davinci: da830-evm: use device properties for at24 eeprom ARM: davinci: dm365-evm: use device properties for at24 eeprom ARM: davinci: mityomapl138: don't read the MAC address from machine code ARM: davinci: da850-evm: remove dead MTD code Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-12usb: host: oxu210hp-hcd: fix indentation issueColin Ian King1-1/+1
A statement is indented too deeply, fix this by removing a tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: ohci-da8xx: add vbus and overcurrent gpiosBartosz Golaszewski1-49/+50
There are two users upstream which register external callbacks for switching the port power on/off and overcurrent protection. Both users only use two GPIOs for that. Instead of having that functionality in the board files, move the logic into the OHCI driver - including the interrupt handler for overcurrent detection. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-12usb: ohci-da8xx: add a helper pointer to &pdev->devBartosz Golaszewski1-9/+9
Add a helper pointer to &pdev->dev. This improves readability by removing all the &pdev->dev dereferencing. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-12usb: ohci-da8xx: add a new line after local variablesBartosz Golaszewski1-0/+1
Add a new line after local variables. This improves the coding style. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-01-30usb: ehci-orion: add S2RAM supportMiquel Raynal1-0/+18
Add suspend/resume callbacks to reset the host controller properly during S2RAM operation. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30usb: ehci-orion: avoid double PHY initializationMiquel Raynal1-23/+3
No need to initialize the PHY from the driver's probe. It is done by the core automatically and doing it twice would increment the phy->powercount counter to 2 instead of 1. During later suspend operation, the counter will be decremented to one, no phy->power_off() will occur and worse than that, the following phy->power_on() at resume time will also be skipped, failing the whole S2RAM operation. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30usb: host: xhci: mvebu: add reset on resume quirkOfer Heifetz4-2/+26
The mvebu xHCI host driver does not have suspend/resume support. Use of the XHCI_RESET_ON_RESUME quirk is mandatory in order to avoid failures after resume. This will work only if no USB device is plugged-in. While at it, mention in the Kconfig file that this IP is also present on the A3700 SoC. Signed-off-by: Ofer Heifetz <oferh@marvell.com> [miquel.raynal@bootlin.com: Reword the commit message] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-28Merge 5.0-rc4 into usb-nextGreg Kroah-Hartman1-0/+1
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22USB: host: whci: rename Kbuild fileGreg Kroah-Hartman1-0/+2
We have been using Makefile for well over a decade now, use that name instead of Kbuild. Also, while moving the file, add the proper SPDX identifier at the top of it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22USB: add missing SPDX lines to Kconfig and MakefilesGreg Kroah-Hartman1-0/+1
There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLELubomir Rintel1-0/+1
This fixes autoloading the module by the OF compatible string. Fixes: 813e18b18a87 ("USB: EHCI: ehci-mv: add DT support") Cc: stable@vger.kernel.org Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-04 02:45:18 +0000