summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/pxa27x_udc.c
AgeCommit message (Collapse)AuthorFilesLines
2009-03-24USB: Remove redundant test in pxa27x_udc and ftdi_sioJulia Lawall1-1/+1
priv is checked not to be NULL near the beginning of the function and not changed subsequently, making the test redundant. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: pxa27x_udc: add vbus_draw callbackRobert Jarzmik1-1/+23
Add the vbus_draw() callback to inform the transceiver, if it exists, how much current may be drawn. The decision is taken on gadget driver side using the configuration chosen by the host and its bMaxPower field. Some systems can use the host's VBUS supply to augment or recharge a battery. (There's also a default of 100 mA for unconfigured devices, or 8 mA if they're OTG devices.) Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: pxa27x_udc: add otg transceiver supportRobert Jarzmik1-1/+18
When a transceiver driver is used, no automatic udc enable is done. The transceiver (OTG or not) should : - take care of VBus sensing - call usb_gadget_vbus_connect() - call usb_gadget_vbus_disconnect() The pullup should remain within this driver's management, either by gpio_pullup of udc_command() fields. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: pxa27x_udc: add vbus session handlingRobert Jarzmik1-0/+33
On vbus_session() call, optionally activate D+ pullup resistor and enable the udc, or deactivate D+ pullup resistor and disable the udc. It is intentional to not handle any VBus sense related irq. An external transceiver driver (like gpio_vbus) should catch VBus sense signal, and call usb_gadget_vbus_connect() or usb_gadget_vbus_disconnect(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: pxa27x_udc: factor pullup code to prepare otg transceiverRobert Jarzmik1-8/+132
Prepare pxa27x_udc to handle usb D+ pullup properly : it should connect the pullup resistor and disconnect it only if no external transceiver is handling it. [ dbrownell@users.sourceforge.net: kerneldoc and gpio fixes ] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: gadget: pxa27x_udc.c: cleanup kernel-docQinghuang Feng1-2/+0
no argument named @index in pio_irq_disable, and no argument named @req in inc_ep_stats_bytes, remove them. Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06gadget: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-1/+1
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-27[ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King1-1/+1
Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-22USB: Fix unneeded endpoint check in pxa27x_udcRobert Jarzmik1-1/+1
The request allocation code doesn't need to check if the endpoint is not NULL, as the only caller in include/linux/usb/gadget.h, usb_ep_alloc_request() needs the endpoint pointer to have a correct value to trigger the allocation code. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove unused #include <version.h>Huang Weiyi1-1/+0
The driver(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/usb/gadget/pxa27x_udc.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Fix pxa27x_udc usb speed handling.Robert Jarzmik1-1/+1
The new composite framework revealed a weakness in the pxa27x_udc driver gadget register function. Instead of checking if speed asked for was USB_LOW_SPEED upon usb_gadget_register() to deny service, it checked only for USB_FULL_SPEED, thus denying service to usb high speed capable gadgets (like g_ether). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-3/+3
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King1-1/+1
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-21USB: remove board-specific UP2OCR configuration from pxa27x-udcDaniel Ribeiro1-1/+0
Remove the board-specific UP2OCR configuration from the pxa27x-udc driver. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-14[ARM] Merge most of the PXA work for initial mergeRussell King1-4/+5
This includes PXA work up to the SPI changes for the initial merge, since e172274ccc55d20536fbdceb6131f38e288541e0 depends on the SPI tree being merged. Conflicts: arch/arm/configs/em_x270_defconfig arch/arm/configs/xm_x270_defconfig
2008-07-09[ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC ↵Philipp Zabel1-2/+2
drivers The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-15[ARM] 5080/1: touch PSSR_OTGPH only on pxa27x in ohci-pxa27x and pxa27x_udcPhilipp Zabel1-2/+3
and include pxa2xx-regs.h as build fix since PSSR definitions moved from pxa-regs.h into pxa2xx-regs.h. Note: This change is temporary as pxa27x processor specific code will be finally moved elsewhere (both drivers should support pxa3xx, too). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-20USB: pxa27x_udc - Fix Oopskarl beldan1-1/+2
udc_disable oopses dereferencing udc_command. Signed-off-by: Karl Beldan <karl.beldan@gmail.com> Acked-by: Robert Jarzmik <rjarzmik@free.fr> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-14USB: pxa27x_udc: minor fixesRobert Jarzmik1-9/+8
Minor fixes to pxa27x udc driver : - don't clobber driver model bus_id field - wrong endianess fix (no functional change; cpu is little-endian) - double udc disable fix - resume/suspend fix (OTG hold bit) - make driver pxa27x dependant (check cpu at runtime) Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: pxa27x_udc driverRobert Jarzmik1-0/+2404
Adds pxa27x udc driver to support USB peripherals on pxa27x chips. The driver is compatible with: Gadget Zero, the File Storage gadget, and the Ethernet gadget (only in CDC subset mode). The driver can't properly support multiple interfaces, because of hardware bugs without possible workaround. That means no RNDIS support from g_ether, and no CDC ACM support in g_serial. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-30 10:02:15 +0000