summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/function
AgeCommit message (Collapse)AuthorFilesLines
2019-12-14Merge tag 'usb-5.5-rc2' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes for reported issues for 5.5-rc2 There's the usual gadget and xhci fixes, as well as some other problems that syzbot has been finding during it's fuzzing runs. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits) usb: dwc3: pci: add ID for the Intel Comet Lake -H variant xhci: make sure interrupts are restored to correct state xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour. xhci: Increase STS_HALT timeout in xhci_suspend() usb: xhci: only set D3hot for pci device xhci: fix USB3 device initiated resume race with roothub autosuspend xhci: Fix memory leak in xhci_add_in_port() USB: Fix incorrect DMA allocations for local memory pool drivers usb: gadget: fix wrong endpoint desc usb: dwc3: ep0: Clear started flag on completion usb: dwc3: gadget: Clear started flag for non-IOC usb: dwc3: gadget: Fix logical condition USB: atm: ueagle-atm: add missing endpoint check USB: adutux: fix interface sanity check USB: idmouse: fix interface sanity checks USB: serial: io_edgeport: fix epic endpoint lookup usb: mon: Fix a deadlock in usbmon between mmap and read usb: common: usb-conn-gpio: Don't log an error on probe deferral usb: core: urb: fix URB structure initialization function usb: typec: fix use after free in typec_register_port() ...
2019-12-10usb: gadget: fix wrong endpoint descEJ Hsu2-1/+6
Gadget driver should always use config_ep_by_speed() to initialize usb_ep struct according to usb device's operating speed. Otherwise, usb_ep struct may be wrong if usb devcie's operating speed is changed. The key point in this patch is that we want to make sure the desc pointer in usb_ep struct will be set to NULL when gadget is disconnected. This will force it to call config_ep_by_speed() to correctly initialize usb_ep struct based on the new operating speed when gadget is re-connected later. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: EJ Hsu <ejh@nvidia.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya1-1/+1
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-11/+1
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-27Merge tag 'usb-5.5-rc1' of ↵Linus Torvalds6-255/+326
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.5-rc1 Lots of little things in here: - typec updates and additions - usb-serial drivers cleanups and fixes - misc USB drivers cleanups and fixes - gadget drivers new features and controllers added - usual xhci additions - other minor changes All of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) usb: gadget: udc: gr_udc: create debugfs directory under usb root usb: gadget: atmel: create debugfs directory under usb root usb: musb: create debugfs directory under usb root usb: serial: Fix Kconfig indentation usb: misc: Fix Kconfig indentation usb: gadget: Fix Kconfig indentation usb: host: Fix Kconfig indentation usb: dwc3: Fix Kconfig indentation usb: gadget: configfs: Fix missing spin_lock_init() usb-storage: Disable UAS on JMicron SATA enclosure USB: documentation: flags on usb-storage versus UAS USB: uas: heed CAPACITY_HEURISTICS USB: uas: honor flag to avoid CAPACITY16 usb: host: xhci-tegra: Correct phy enable sequence usb-serial: cp201x: support Mark-10 digital force gauge usb: chipidea: imx: pinctrl for HSIC is optional usb: chipidea: imx: refine the error handling for hsic usb: chipidea: imx: change hsic power regulator as optional usb: chipidea: imx: check data->usbmisc_data against NULL before access usb: chipidea: core: change vbus-regulator as optional ...
2019-11-09usb: gadget: u_audio: Remove superfluous snd_dma_continuous_data()Takashi Iwai1-1/+1
The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20191108164214.611-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-23compat_ioctl: use correct compat_ptr() translation in driversArnd Bergmann1-11/+1
A handful of drivers all have a trivial wrapper around their ioctl handler, but don't call the compat_ptr() conversion function at the moment. In practice this does not matter, since none of them are used on the s390 architecture and for all other architectures, compat_ptr() does not do anything, but using the new compat_ptr_ioctl() helper makes it more correct in theory, and simplifies the code. I checked that all ioctl handlers in these files are compatible and take either pointer arguments or no argument. Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-22usb: gadget: f_tcm: Provide support to get alternate setting in tcm functionJayshri Pawar1-1/+12
Providing tcm_get_alt in tcm function to support Bulk only protocol and USB Attached SCSI protocol Signed-off-by: Jayshri Pawar <jpawar@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-22usb: gadget: u_serial: use mutex for serialising open()sMichał Mirosław1-75/+37
Remove home-made waiting mechanism from gs_open() and rely on portmaster's mutex to do the job. Note: This releases thread waiting on close() when another thread open()s simultaneously. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-22usb: gadget: u_serial: diagnose missed console messagesMichał Mirosław1-1/+14
Insert markers in console stream marking places where data is missing. This makes the hole in the data stand out clearly instead of glueing together unrelated messages. Example output as seen from USB host side: [ 0.064078] pinctrl core: registered pin 16 (UART3_RTS_N PC0) on 70000868.pinmux [ 0.064130] pinctrl [missed 114987 bytes] [ 4.302299] udevd[134]: starting version 3.2.5 [ 4.306845] random: udevd: uninitialized urandom read (16 bytes read) Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-22usb: gadget: u_serial: allow more console gadget portsMichał Mirosław4-0/+97
Allow configuring more than one console using USB serial or ACM gadget. By default, only first (ttyGS0) is a console, but this may be changed using function's new "console" attribute. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-22usb: gadget: u_serial: make OBEX port not a consoleMichał Mirosław3-5/+14
Prevent OBEX serial port from ever becoming a console. Console messages will definitely break the protocol, and since you have to instantiate the port making it explicitly for OBEX, there is no point in allowing console to break it by mistake. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-22usb: gadget: u_serial: reimplement console supportMichał Mirosław1-181/+158
Rewrite console support to fix a few shortcomings of the old code preventing its use with multiple ports. This removes some duplicated code and replaces a custom kthread with simpler workqueue item. Only port ttyGS0 gets to be a console for now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-22usb: gadget: u_serial: add missing port entry lockingMichał Mirosław1-0/+2
gserial_alloc_line() misses locking (for a release barrier) while resetting port entry on TTY allocation failure. Fix this. Cc: stable@vger.kernel.org Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-09-18vfs: Convert functionfs to use the new mount APIDavid Howells1-113/+120
Convert the functionfs filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> cc: linux-usb@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-08-12usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_altBenjamin Herrenschmidt1-10/+18
If fsg_disable() and fsg_set_alt() are called too closely to each other (for example due to a quick reset/reconnect), what can happen is that fsg_set_alt sets common->new_fsg from an interrupt while handle_exception is trying to process the config change caused by fsg_disable(): fsg_disable() ... handle_exception() sets state back to FSG_STATE_NORMAL hasn't yet called do_set_interface() or is inside it. ---> interrupt fsg_set_alt sets common->new_fsg queues a new FSG_STATE_CONFIG_CHANGE <--- Now, the first handle_exception can "see" the updated new_fsg, treats it as if it was a fsg_set_alt() response, call usb_composite_setup_continue() etc... But then, the thread sees the second FSG_STATE_CONFIG_CHANGE, and goes back down the same path, wipes and reattaches a now active fsg, and .. calls usb_composite_setup_continue() which at this point is wrong. Not only we get a backtrace, but I suspect the second set_interface wrecks some state causing the host to get upset in my case. This fixes it by replacing "new_fsg" by a "state argument" (same principle) which is set in the same lock section as the state update, and retrieved similarly. That way, there is never any discrepancy between the dequeued state and the observed value of it. We keep the ability to have the latest reconfig operation take precedence, but we guarantee that once "dequeued" the argument (new_fsg) will not be clobbered by any new event. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-07-11Merge tag 'usb-5.3-rc1' of ↵Linus Torvalds5-12/+16
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY updates from Greg KH: "Here is the big USB and PHY driver pull request for 5.3-rc1. Lots of stuff here, all of which has been in linux-next for a while with no reported issues. Nothing is earth-shattering, just constant forward progress for more devices supported and cleanups and small fixes: - USB gadget driver updates and fixes - new USB gadget driver for some hardware, followed by a quick revert of those patches as they were not ready to be merged... - PHY driver updates - Lots of new driver additions and cleanups with a few fixes mixed in" * tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits) Revert "usb: gadget: storage: Remove warning message" Revert "dt-bindings: add binding for USBSS-DRD controller." Revert "usb:gadget Separated decoding functions from dwc3 driver." Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function." Revert "usb:gadget Simplify usb_decode_get_set_descriptor function." Revert "usb:cdns3 Add Cadence USB3 DRD Driver" Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer." usb :fsl: Change string format for errata property usb: host: Stops USB controller init if PLL fails to lock usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918 usb: phy: Workaround for USB erratum-A005728 usb: fsl: Set USB_EN bit to select ULPI phy usb: Handle USB3 remote wakeup for LPM enabled devices correctly drivers/usb/typec/tps6598x.c: fix 4CC cmd write drivers/usb/typec/tps6598x.c: fix portinfo width usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set usb: renesas_usbhs: add a workaround for a race condition of workqueue usb: gadget: udc: renesas_usb3: remove redundant assignment to ret usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() USB: gadget: function: fix issue Unneeded variable: "value" ...
2019-07-04Revert "usb: gadget: storage: Remove warning message"Greg Kroah-Hartman2-16/+6
This reverts commit e70b3f5da00119e057b7faa557753fee7f786f17. EJ writes: Thinh found this patch might cause a failure in USB CV TD 9.13 Set Configuration Test. We are trying to fix it. Could you please defer the merging of this patch until we fix it? So am now dropping it. Reported-by: EJ Hsu <ejh@nvidia.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03Merge tag 'usb-for-v5.3-part2' of ↵Greg Kroah-Hartman1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: more changes for v5.3 merge window Turns out a few more important changes came about. We have the new Cadence DRD Driver being added here and that's the biggest, most important part. Together with that we have suport for new imx7ulp phy. Support for TigerLake Devices on dwc3. Also a couple important fixes which weren't completed in time for the -rc cycle. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> * tag 'usb-for-v5.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: renesas_usbhs: add a workaround for a race condition of workqueue usb: gadget: udc: renesas_usb3: remove redundant assignment to ret usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() USB: gadget: function: fix issue Unneeded variable: "value" usb: phy: phy-mxs-usb: add imx7ulp support doc: dt-binding: mxs-usb-phy: add compatible for 7ulp usb:cdns3 Fix for stuck packets in on-chip OUT buffer. usb:cdns3 Add Cadence USB3 DRD Driver usb:gadget Simplify usb_decode_get_set_descriptor function. usb:gadget Patch simplify usb_decode_set_clear_feature function. usb:gadget Separated decoding functions from dwc3 driver. dt-bindings: add binding for USBSS-DRD controller. usb: dwc3: pci: add support for TigerLake Devices
2019-07-03USB: gadget: function: fix issue Unneeded variable: "value"Hariprasad Kelam1-2/+1
fix below issue reported by coccicheck drivers/usb/gadget/function/f_eem.c:169:7-12: Unneeded variable: "value". Return "- EOPNOTSUPP" on line 179 We can not change return type of eem_setup as its registered with callback function Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-07-01Merge tag 'usb-for-v5.3' of ↵Greg Kroah-Hartman5-15/+30
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v5.3 merge window The biggest part here is a set of patches removing unnecesary variables from several drivers. Meson-g12a's dwc3 glue implemented IRQ-based OTG/DRD role swap. Qcom's dwc3 glue added support for ACPI, mainly for the AArch64-based SoCs. DWC3 also got support for Intel Elkhart Lake platforms. * tag 'usb-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (30 commits) usb: dwc3: remove unused @lock member of dwc3_ep struct usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices usb: Replace snprintf with scnprintf in gether_get_ifname usb: gadget: ether: Fix race between gether_disconnect and rx_submit usb: gadget: storage: Remove warning message usb: dwc3: gadget: Add support for disabling U1 and U2 entries usb: gadget: send usb_gadget as an argument in get_config_params doc: dt: bindings: usb: dwc3: Update entries for disabling U1 and U2 usb: dwc3: qcom: Use of_clk_get_parent_count() usb: dwc3: Fix core validation in probe, move after clocks are enabled usb: dwc3: qcom: Improve error handling usb: dwc3: qcom: Start USB in 'host mode' on the SDM845 usb: dwc3: qcom: Add support for booting with ACPI soc: qcom: geni: Add support for ACPI Revert "usb: dwc2: host: Setting qtd to NULL after freeing it" usb: gadget: net2272: remove redundant assignments to pointer 's' usb: gadget: Zero ffs_io_data USB: omap_udc: Remove unneeded variable fotg210-udc: Remove unneeded variable usb: gadget: at91_udc: Remove unneeded variable ...
2019-06-20docs: usb: rename files to .rst and add them to drivers-apiMauro Carvalho Chehab1-1/+1
While there are a mix of things here, most of the stuff were written from Kernel developer's PoV. So, add them to the driver-api book. A follow up for this patch would be to move documents from there that are specific to sysadmins, adding them to the admin-guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-20usb: Replace snprintf with scnprintf in gether_get_ifnameDaniel M German1-2/+2
snprintf returns the actual length of the buffer created; however, this is not the case if snprintf truncates its parameter. See https://lwn.net/Articles/69419/ for a detailed explanation. The current code correctly handles this case at the expense of extra code in the return statement. scnprintf does returns the actual length of the buffer created making the ?: operator unnecessary in the return statement. This change does not alter the functionality of the code. Signed-off-by: Daniel M German <dmg@turingmachine.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: gadget: ether: Fix race between gether_disconnect and rx_submitKiruthika Varadarajan1-2/+4
On spin lock release in rx_submit, gether_disconnect get a chance to run, it makes port_usb NULL, rx_submit access NULL port USB, hence null pointer crash. Fixed by releasing the lock in rx_submit after port_usb is used. Fixes: 2b3d942c4878 ("usb ethernet gadget: split out network core") Cc: <stable@vger.kernel.org> Signed-off-by: Kiruthika Varadarajan <Kiruthika.Varadarajan@harman.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: gadget: storage: Remove warning messageEJ Hsu2-6/+16
This change is to fix below warning message in following scenario: usb_composite_setup_continue: Unexpected call When system tried to enter suspend, the fsg_disable() will be called to disable fsg driver and send a signal to fsg_main_thread. However, at this point, the fsg_main_thread has already been frozen and can not respond to this signal. So, this signal will be pended until fsg_main_thread wakes up. Once system resumes from suspend, fsg_main_thread will detect a signal pended and do some corresponding action (in handle_exception()). Then, host will send some setup requests (get descriptor, set configuration...) to UDC driver trying to enumerate this device. During the handling of "set configuration" request, it will try to sync up with fsg_main_thread by sending a signal (which is the same as the signal sent by fsg_disable) to it. In a similar manner, once the fsg_main_thread receives this signal, it will call handle_exception() to handle the request. However, if the fsg_main_thread wakes up from suspend a little late and "set configuration" request from Host arrives a little earlier, fsg_main_thread might come across the request from "set configuration" when it handles the signal from fsg_disable(). In this case, it will handle this request as well. So, when fsg_main_thread tries to handle the signal sent from "set configuration" later, there will nothing left to do and warning message "Unexpected call" is printed. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: EJ Hsu <ejh@nvidia.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: gadget: Zero ffs_io_dataAndrzej Pietrasiewicz1-2/+4
In some cases the "Allocate & copy" block in ffs_epfile_io() is not executed. Consequently, in such a case ffs_alloc_buffer() is never called and struct ffs_io_data is not initialized properly. This in turn leads to problems when ffs_free_buffer() is called at the end of ffs_epfile_io(). This patch uses kzalloc() instead of kmalloc() in the aio case and memset() in non-aio case to properly initialize struct ffs_io_data. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: gadget: u_audio: Fixed variable declaration coding style issueJonas Stenvall1-2/+2
Fixed a coding style issue, replacing unsigned with unsigned int. Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Jonas Stenvall <jonas.stenvall.umea@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: gadget: f_fs: data_len used before properly setFei Yang1-1/+2
The following line of code in function ffs_epfile_io is trying to set flag io_data->use_sg in case buffer required is larger than one page. io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE; However at this point of time the variable data_len has not been set to the proper buffer size yet. The consequence is that io_data->use_sg is always set regardless what buffer size really is, because the condition (data_len > PAGE_SIZE) is effectively an unsigned comparison between -EINVAL and PAGE_SIZE which would always result in TRUE. Fixes: 772a7a724f69 ("usb: gadget: f_fs: Allow scatter-gather buffers") Signed-off-by: Fei Yang <fei.yang@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-05media: usb/gadget/f_uvc: set device_caps in struct video_deviceHans Verkuil2-4/+1
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. But this only really works if all drivers use this, so convert this UVC gadget driver. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-03usb: gadget: do not use __constant_cpu_to_le16Sergey Senozhatsky1-3/+3
A trivial patch. cpu_to_le16() is capable enough to detect __builtin_constant_p() and to use an appropriate compile time ___constant_swahbXX() function. So we can use cpu_to_le16() instead of __constant_cpu_to_le16(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: gadget: f_ncm: Add OS descriptor supportRomain Izard2-3/+47
To be able to use the default USB class drivers available in Microsoft Windows, we need to add OS descriptors to the exported USB gadget to tell the OS that we are compatible with the built-in drivers. Copy the OS descriptor support from f_rndis into f_ncm. As a result, using the WINNCM compatible ID, the UsbNcm driver is loaded on enumeration without the need for a custom driver or inf file. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: gadget: f_ncm: Fix NTP-32 supportRomain Izard1-7/+3
When connecting a CDC-NCM gadget to an host that uses the NTP-32 mode, or that relies on the default CRC setting, the current implementation gets confused, and does not expect the correct signature for its packets. Fix this, by ensuring that the ndp_sign member in the f_ncm structure always contain a valid value. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: gadget: f_fs: don't free buffer prematurelyFei Yang1-1/+2
The following kernel panic happens due to the io_data buffer gets deallocated before the async io is completed. Add a check for the case where io_data buffer should be deallocated by ffs_user_copy_worker. [ 41.663334] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 41.672099] #PF error: [normal kernel read fault] [ 41.677356] PGD 20c974067 P4D 20c974067 PUD 20c973067 PMD 0 [ 41.683687] Oops: 0000 [#1] PREEMPT SMP [ 41.687976] CPU: 1 PID: 7 Comm: kworker/u8:0 Tainted: G U 5.0.0-quilt-2e5dc0ac-00790-gd8c79f2-dirty #2 [ 41.705309] Workqueue: adb ffs_user_copy_worker [ 41.705316] RIP: 0010:__vunmap+0x2a/0xc0 [ 41.705318] Code: 0f 1f 44 00 00 48 85 ff 0f 84 87 00 00 00 55 f7 c7 ff 0f 00 00 48 89 e5 41 55 41 89 f5 41 54 53 48 89 fb 75 71 e8 56 d7 ff ff <4c> 8b 60 48 4d 85 e4 74 76 48 89 df e8 25 ff ff ff 45 85 ed 74 46 [ 41.705320] RSP: 0018:ffffbc3a40053df0 EFLAGS: 00010286 [ 41.705322] RAX: 0000000000000000 RBX: ffffbc3a406f1000 RCX: 0000000000000000 [ 41.705323] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff [ 41.705324] RBP: ffffbc3a40053e08 R08: 000000000001fb79 R09: 0000000000000037 [ 41.705325] R10: ffffbc3a40053b68 R11: ffffbc3a40053cad R12: fffffffffffffff2 [ 41.705326] R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffffffffff [ 41.705328] FS: 0000000000000000(0000) GS:ffff9e2977a80000(0000) knlGS:0000000000000000 [ 41.705329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.705330] CR2: 0000000000000048 CR3: 000000020c994000 CR4: 00000000003406e0 [ 41.705331] Call Trace: [ 41.705338] vfree+0x50/0xb0 [ 41.705341] ffs_user_copy_worker+0xe9/0x1c0 [ 41.705344] process_one_work+0x19f/0x3e0 [ 41.705348] worker_thread+0x3f/0x3b0 [ 41.829766] kthread+0x12b/0x150 [ 41.833371] ? process_one_work+0x3e0/0x3e0 [ 41.838045] ? kthread_create_worker_on_cpu+0x70/0x70 [ 41.843695] ret_from_fork+0x3a/0x50 [ 41.847689] Modules linked in: hci_uart bluetooth ecdh_generic rfkill_gpio dwc3_pci dwc3 snd_usb_audio mei_me tpm_crb snd_usbmidi_lib xhci_pci xhci_hcd mei tpm snd_hwdep cfg80211 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_hda_core videobuf2_dma_sg crlmodule [ 41.876880] CR2: 0000000000000048 [ 41.880584] ---[ end trace 2bc4addff0f2e673 ]--- [ 41.891346] RIP: 0010:__vunmap+0x2a/0xc0 [ 41.895734] Code: 0f 1f 44 00 00 48 85 ff 0f 84 87 00 00 00 55 f7 c7 ff 0f 00 00 48 89 e5 41 55 41 89 f5 41 54 53 48 89 fb 75 71 e8 56 d7 ff ff <4c> 8b 60 48 4d 85 e4 74 76 48 89 df e8 25 ff ff ff 45 85 ed 74 46 [ 41.916740] RSP: 0018:ffffbc3a40053df0 EFLAGS: 00010286 [ 41.922583] RAX: 0000000000000000 RBX: ffffbc3a406f1000 RCX: 0000000000000000 [ 41.930563] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff [ 41.938540] RBP: ffffbc3a40053e08 R08: 000000000001fb79 R09: 0000000000000037 [ 41.946520] R10: ffffbc3a40053b68 R11: ffffbc3a40053cad R12: fffffffffffffff2 [ 41.954502] R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffffffffff [ 41.962482] FS: 0000000000000000(0000) GS:ffff9e2977a80000(0000) knlGS:0000000000000000 [ 41.971536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.977960] CR2: 0000000000000048 CR3: 000000020c994000 CR4: 00000000003406e0 [ 41.985930] Kernel panic - not syncing: Fatal exception [ 41.991817] Kernel Offset: 0x16000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 42.009525] Rebooting in 10 seconds.. [ 52.014376] ACPI MEMORY or I/O RESET_REG. Fixes: 772a7a724f69 ("usb: gadget: f_fs: Allow scatter-gather buffers") Signed-off-by: Fei Yang <fei.yang@intel.com> Reviewed-by: Manu Gautam <mgautam@codeaurora.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-20USB: gadget: f_hid: fix deadlock in f_hidg_write()Radoslav Gerganov1-3/+3
In f_hidg_write() the write_spinlock is acquired before calling usb_ep_queue() which causes a deadlock when dummy_hcd is being used. This is because dummy_queue() callbacks into f_hidg_req_complete() which tries to acquire the same spinlock. This is (part of) the backtrace when the deadlock occurs: 0xffffffffc06b1410 in f_hidg_req_complete 0xffffffffc06a590a in usb_gadget_giveback_request 0xffffffffc06cfff2 in dummy_queue 0xffffffffc06a4b96 in usb_ep_queue 0xffffffffc06b1eb6 in f_hidg_write 0xffffffff8127730b in __vfs_write 0xffffffff812774d1 in vfs_write 0xffffffff81277725 in SYSC_write Fix this by releasing the write_spinlock before calling usb_ep_queue() Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org # 4.11+ Fixes: 749494b6bdbb ("usb: gadget: f_hid: fix: Move IN request allocation to set_alt()") Signed-off-by: Radoslav Gerganov <rgerganov@vmware.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-9/+0
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-02-11usb: gadget: Change Andrzej Pietrasiewicz's e-mail addressAndrzej Pietrasiewicz16-16/+16
My @samusung.com address is going to cease existing soon, so change it to an address which can actually be used to contact me. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-02-11usb: f_fs: Avoid crash due to out-of-scope stack ptr accessJohn Stultz1-0/+1
Since the 5.0 merge window opened, I've been seeing frequent crashes on suspend and reboot with the trace: [ 36.911170] Unable to handle kernel paging request at virtual address ffffff801153d660 [ 36.912769] Unable to handle kernel paging request at virtual address ffffff800004b564 ... [ 36.950666] Call trace: [ 36.950670] queued_spin_lock_slowpath+0x1cc/0x2c8 [ 36.950681] _raw_spin_lock_irqsave+0x64/0x78 [ 36.950692] complete+0x28/0x70 [ 36.950703] ffs_epfile_io_complete+0x3c/0x50 [ 36.950713] usb_gadget_giveback_request+0x34/0x108 [ 36.950721] dwc3_gadget_giveback+0x50/0x68 [ 36.950723] dwc3_thread_interrupt+0x358/0x1488 [ 36.950731] irq_thread_fn+0x30/0x88 [ 36.950734] irq_thread+0x114/0x1b0 [ 36.950739] kthread+0x104/0x130 [ 36.950747] ret_from_fork+0x10/0x1c I isolated this down to in ffs_epfile_io(): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/gadget/function/f_fs.c#n1065 Where the completion done is setup on the stack: DECLARE_COMPLETION_ONSTACK(done); Then later we setup a request and queue it, and wait for it: if (unlikely(wait_for_completion_interruptible(&done))) { /* * To avoid race condition with ffs_epfile_io_complete, * dequeue the request first then check * status. usb_ep_dequeue API should guarantee no race * condition with req->complete callback. */ usb_ep_dequeue(ep->ep, req); interrupted = ep->status < 0; } The problem is, that we end up being interrupted, dequeue the request, and exit. But then the irq triggers and we try calling complete() on the context pointer which points to now random stack space, which results in the panic. Alan Stern pointed out there is a bug here, in that the snippet above "assumes that usb_ep_dequeue() waits until the request has been completed." And that: wait_for_completion(&done); Is needed right after the usb_ep_dequeue(). Thus this patch implements that change. With it I no longer see the crashes on suspend or reboot. This issue seems to have been uncovered by behavioral changes in the dwc3 driver in commit fec9095bdef4e ("usb: dwc3: gadget: remove wait_end_transfer"). Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Thinh Nguyen <thinh.nguyen@synopsys.com> Cc: Chen Yu <chenyu56@huawei.com> Cc: Jerry Zhang <zhangjerry@google.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Vincent Pelletier <plr.vincent@gmail.com> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linux USB List <linux-usb@vger.kernel.org> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-02-07usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() callAndrzej Pietrasiewicz1-0/+11
usb_ep_autoconfig() treats the passed descriptor as if it were an fs descriptor. In particular, for bulk endpoints, it clips wMaxPacketSize to 64. This patch preserves the original value. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-02-07usb: gadget: function: sync f_uac1 ac header baInterfaceNrliangshengjun1-0/+2
f_uac1 audio control header descriptor default set baInterfaceNr[]={1,2}, but usb gadget make a configuration descriptor with more interfaces combination, it can not confirm f_uac1 function linked first. So always keep baInterfaceNr[]={1,2} is correct, and it is necessary to sync baInterfaceNr[] with usb_interface_id() value. Signed-off-by: Liang Shengjun <liangshengjun@hisilicon.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-02-07usb: gadget: fix various indentation issuesColin Ian King1-4/+4
There are a bunch of various indentation issues, clean these up. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-02-04scsi: target/core: Remove the write_pending_status() callback functionBart Van Assche1-9/+0
Due to the patch that makes TMF handling synchronous the write_pending_status() callback function is no longer called. Hence remove it. Acked-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-28usb: gadget: uvc: add uvcg_warn macroPaul Elder1-0/+2
We only have uvcg_dbg, uvcg_info, and uvcg_err, so add uvcg_warn macro to print gadget device name and function name along with format. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-28usb: gadget: u_serial: process RX in workqueue instead of taskletMichał Mirosław1-21/+14
Switch RX processing from tasklet to (delayed) work queue. This allows receiver more room to process incoming data and prevents flood of "ttyGS0: RX not scheduled?" messages on HS receive on slow CPU. A side effect is 2.4MB/s zmodem transfer speed (up from 1.8MB/s) on my test board. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-28usb: gadget: Remove dead branch codeYueHaibing1-8/+0
'num' is a u8 variable, it never greater than 255, So the if branch is dead code and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-14usb: gadget: Potential NULL dereference on allocation errorDan Carpenter1-1/+1
The source_sink_alloc_func() function is supposed to return error pointers on error. The function is called from usb_get_function() which doesn't check for NULL returns so it would result in an Oops. Of course, in the current kernel, small allocations always succeed so this doesn't affect runtime. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds1-2/+2
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28Merge tag 'usb-4.21-rc1' of ↵Linus Torvalds2-15/+109
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.21-rc1. All of the usual bits are in here: - loads of USB gadget driver updates and additions - new device ids - phy driver updates - xhci reworks and new features - typec updates Full details are in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (142 commits) USB: serial: option: add Fibocom NL678 series cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader. usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable() usb: typec: tcpm: Extend the matching rules on PPS APDO selection usb: typec: Improve Alt Mode documentation usb: musb: dsps: fix runtime pm for peripheral mode usb: musb: dsps: fix otg state machine USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays usb: renesas_usbhs: add support for RZ/G2E usb: ehci-omap: Fix deferred probe for phy handling usb: roles: Add a description for the class to Kconfig usb: renesas_usbhs: mark PM functions as __maybe_unused usb: core: Remove unnecessary memset() usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE phy: qcom-qmp: Expose provided clocks to DT dt-bindings: phy-qcom-qmp: Move #clock-cells to child phy: qcom-qmp: Utilize fully-specified DT registers dt-bindings: phy-qcom-qmp: Fix register underspecification phy: ti: fix semicolon.cocci warnings phy: dphy: Add configuration helpers ...
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-7/+1
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-13net: dev: Add extack argument to dev_set_mac_address()Petr Machata1-1/+1
A follow-up patch will add a notifier type NETDEV_PRE_CHANGEADDR, which allows vetoing of MAC address changes. One prominent path to that notification is through dev_set_mac_address(). Therefore give this function an extack argument, so that it can be packed together with the notification. Thus a textual reason for rejection (or a warning) can be communicated back to the user. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12Merge tag 'usb-for-v4.21' of ↵Greg Kroah-Hartman2-15/+109
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB changes for v4.21 So it looks like folks are interested in dwc3 again. Almost 64% of the changes are in dwc3 this time around with some other bits in gadget functions and dwc2. There are two important parts here: a. removal of the waitqueue from dwc3's dequeue implementation, which will guarantee that gadget functions can dequeue from any context and; b. better method for starting isochronous transfers to avoid, as much as possible, missed isoc frames. Apart from these, we have the usual set of non-critical fixes and new features all over the place. * tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (56 commits) usb: dwc2: Fix disable all EP's on disconnect usb: dwc3: gadget: Disable CSP for stream OUT ep usb: dwc2: disable power_down on Amlogic devices Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs" USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler usb: dwc3: trace: add missing break statement to make compiler happy usb: dwc3: gadget: Report isoc transfer frame number usb: gadget: Introduce frame_number to usb_request usb: renesas_usbhs: Use SIMPLE_DEV_PM_OPS macro usb: renesas_usbhs: Remove dummy runtime PM callbacks usb: dwc2: host: use hrtimer for NAK retries usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode usb: mtu3: enable SETUPENDISR interrupt usb: mtu3: fix the issue about SetFeature(U1/U2_Enable) usb: mtu3: enable hardware remote wakeup from L1 automatically usb: mtu3: remove QMU checksum usb/mtu3: power down device ip at setup usb: dwc2: Disable power down feature on Samsung SoCs usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-03 02:08:46 +0000