summaryrefslogtreecommitdiffstats
path: root/drivers/usb/class
AgeCommit message (Collapse)AuthorFilesLines
2017-03-17USB: usbtmc: fix probe error pathJohan Hovold1-2/+6
Make sure to initialise the return value to avoid having allocation failures going unnoticed when allocating interrupt-endpoint resources. This prevents use-after-free or worse when the device is later unbound. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: usbtmc: add missing endpoint sanity checkJohan Hovold1-1/+9
USBTMC devices are required to have a bulk-in and a bulk-out endpoint, but the driver failed to verify this, something which could lead to the endpoint addresses being taken from uninitialised memory. Make sure to zero all private data as part of allocation, and add the missing endpoint sanity check. Note that this also addresses a more recently introduced issue, where the interrupt-in-presence flag would also be uninitialised whenever the optional interrupt-in endpoint is not present. This in turn could lead to an interrupt urb being allocated, initialised and submitted based on uninitialised values. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Fixes: 5b775f672cc9 ("USB: add USB test and measurement class driver") Cc: stable <stable@vger.kernel.org> # 2.6.28 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar2-1/+2
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-15usb: cdc-wdm: remove logically dead codeGustavo A. R. Silva1-1/+1
Remove logically dead code. 'cntr' is always equal to zero when the following line of code is executed: rv = cntr ? cntr : -EAGAIN; Addresses-Coverity-ID: 113227 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-26USB: cdc-acm: fix TIOCGSERIAL flagsJohan Hovold1-1/+0
The driver reports that it always uses a low-latency mode by returning the ASYNC_LOW_LATENCY flag through TIOCGSERIAL. Even if this behaviour could not be changed, this may have made some sense prior to 7a9a65ced11e ("cdc-acm: Fix long standing abuse of tty->low_latency") which removed the unconditional setting of the corresponding tty low_latency flag (something which had always been broken in itself). Since the driver does not have a low-latency mode, let's drop the flag. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-05USB: cdc-acm: add device id for GW Instek AFG-125Nathaniel Quillin1-0/+1
Add device-id entry for GW Instek AFG-125, which has a byte swapped bInterfaceSubClass (0x20). Signed-off-by: Nathaniel Quillin <ndq@google.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21cdc-acm: handle read pipe errorsLadislav Michl2-10/+53
Read urbs are submitted back only on success, causing read pipe running out of urbs after few errors. No more characters can be read from tty device then until it is reopened and no errors are reported. Fix that by always submitting urbs back and clearing stall on -EPIPE. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21cdc-acm: remove is_int_ep from acm structureLadislav Michl2-4/+2
is_int_ep is used only in acm_probe, no need to store it in device data. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21cdc-acm: store in and out pipes in acm structureLadislav Michl2-16/+18
Clearing stall needs pipe descriptor, store it in acm structure. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21cdc-acm: refactor killing urbsLadislav Michl1-27/+16
Move urb killing code into separate function and use it instead of copying that code pattern over. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21cdc-acm: avoid interface_to_usbdev callLadislav Michl1-6/+3
Pointer to usb_device is already stored in acm structure. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21cdc-acm: reindent log messagesLadislav Michl1-18/+17
Use only one tab to indent dev_{(v)dbg,err} parameters. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14Merge 4.9-rc5 into usb-nextGreg Kroah-Hartman1-2/+2
We want/need the USB fixes in here as well, for testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10USB: cdc-acm: use get_icount tty operationJohan Hovold1-19/+12
Use the tty get_icount operation instead of implementing TIOCGICOUNT directly. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10USB: cdc-acm: fix invalid user-pointer checkJohan Hovold1-3/+0
Drop invalid user-pointer check from TIOCGSERIAL handler. A NULL-pointer can be valid in user space and copy_to_user() takes care of sanity checking. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10USB: cdc-acm: fix TIOCMIWAITJohan Hovold1-2/+0
The TIOCMIWAIT implementation would return -EINVAL if any of the three supported signals were included in the mask. Instead of returning an error in case TIOCM_CTS is included, simply drop the mask check completely, which is in accordance with how other drivers implement this ioctl. Fixes: 5a6a62bdb925 ("cdc-acm: add TIOCMIWAIT") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07cdc-acm: fix uninitialized variableOliver Neukum1-0/+2
variable struct usb_cdc_parsed_header h may be used uninitialized in acm_probe. In kernel 4.8. /* handle quirks deadly to normal probing*/ if (quirks == NO_UNION_NORMAL) ... goto skip_normal_probe; } we bypass call to cdc_parse_cdc_header(&h, intf, buffer, buflen); but later use h in if (h.usb_cdc_country_functional_desc) { /* export the country data */ Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Reported-by: Victor Sologoubov <victor0@rambler.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usbtmc: Add, clarify and fix commentsDave Penkler1-2/+3
Add information regarding lifespan of kref protection: Clarify comment on kref_get for interrupt in urb in usbtmc_probe() Add comment on kref_get in usbtmc_open() Fix endpoint reference in documentation for send_request_dev_dep_msg_in() Signed-off-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28Revert "usbtmc: convert to devm_kzalloc"Greg Kroah-Hartman1-1/+2
This reverts commit e6c7efdcb76f11b04e3d3f71c8d764ab75c9423b. Turns out it was totally wrong. The memory is supposed to be bound to the kref, as the original code was doing correctly, not the device/driver binding as the devm_kzalloc() would cause. This fixes an oops when read would be called after the device was unbound from the driver. Reported-by: Ladislav Michl <ladis@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@vger.kernel.org> # 3.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-21cdc-acm: hardening against malicious devicesOliver Neukum1-0/+5
This should fix the last holes against malicious devices still open in cdc-acm. It cannot go into stable due to the introduction of the common parser. The fix for stable already merged also covers the problems this patch fixes. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13cdc-acm: cleaning up debug in data submission pathOliver Neukum1-10/+6
Further cleanup making the debug messages more precise, useful and removing mere trace points. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13cdc-acm: cleanup debugging in submission pathOliver Neukum1-4/+4
Actually make it retutn useful information. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-09cdc-acm: delete obsolete debug messagesOliver Neukum1-17/+3
Some debug messages merely provide a function trace without additional debug data. They predate ftrace and can be replaced by it. Drop them without replacement. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-09cdc-wdm: add terminating newlineOliver Neukum1-10/+10
Debug messages should be properly terminated. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: class: usbtmc: don't print on ENOMEMWolfram Sang1-3/+1
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-21Merge 4.8-rc3 into usb-nextGreg Kroah-Hartman2-4/+2
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-15cdc-acm: fix wrong pipe type on rx interrupt xfersGavin Li2-4/+2
This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb(). Signed-off-by: Gavin Li <git@thegavinli.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-15cdc-wdm: cleanup debug messagesOliver Neukum1-4/+3
Dynamic debugging will already add the function (and the line number) to a debug message if one requests that. It makes no sense to add them unconditionally in a driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-15usb: class: usbtmc: don't print error when allocating urb failsWolfram Sang1-3/+1
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10cdc-wdm: Clear read pipeline in case of errorRobert Foss1-10/+29
Implemented queued response handling. This queue is processed every time the WDM_READ flag is cleared. In case of a read error, userspace may not actually read the data, since the driver returns an error through wdm_poll. After this, the underlying device may attempt to send us more data, but the queue is not processed. While userspace is also blocked, because the read error is never cleared. After this patch, we proactively process the queue on a read error. If there was an outstanding response to handle, that will clear the error (or go through the same logic again, if another read error occurs). If there was no outstanding response, this will bring the queue size back to 0, unblocking a future response from the underlying device. Signed-off-by: Robert Foss <robert.foss@collabora.com> Tested-by: Robert Foss <robert.foss@collabora.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-09cdc-wdm: fix "out-of-sync" due to missing notificationsBjørn Mork1-4/+99
The driver enforces a strict one-to-one relationship between the received RESPONSE_AVAILABLE notifications and messages read from the device. At the same time, it will cancel the interrupt URB when there is no client holding the character device open. Many devices do not cope well with this behaviour. They maintain a FIFO queue of messages, and send notifications on a best effort basis. Messages are queued regardless of whether the notification is successful or not. So if the driver loses a single notification, which can easily happen when the interrupt URB is cancelled, then the device and driver becomes out-of-sync. New messages end up at the end of the queue, while the associated notification makes the driver read only the first message from the queue. This state is permanent from a user point of view. There is no no way to flush the device queue without resetting the device or using another driver. The problem is easy to hit with current QMI and MBIM command line tools, which typically close the character device after seeing the reply they expect. Any pending unsolicited messages from the device will then trigger the driver bug. Fix by always reading all queued messages from the device when the notification URB is first submitted. This is expected to end with an -EPIPE status when there are no more pending messages, so demote the printk associated with -EPIPE to debug level. The workaround has been tested on a large number of different MBIM and QMI devices, as well as the Ericsson F5521gw and H5321gw modems with real Device Management functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-18cdc-acm: beautify probe()Oliver Neukum1-20/+24
This removes some overly long lines by renaming variables and giving them local scope. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-18cdc-wdm: use the common CDC parserOliver Neukum1-25/+5
Now that the common parser resides in USB core, it can be used for CDC-WDM. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-18cdc-acm: cleanup error handlingOliver Neukum1-5/+3
A small update to unify error handling during probe(). Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-18cdc-acm: use the common parserOliver Neukum1-59/+10
This introduces the common parser for extra CDC headers now that it no longer depends on usbnet. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07usb: cdc-acm: Space prohibited before close parenthesis ')'.Sandhya Bankar1-1/+1
Space prohibited before close parenthesis ')'. Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_INITIALIZED bit and update atomicallyPeter Hurley1-2/+2
Replace ASYNC_INITIALIZED bit in the tty_port::flags field with TTY_PORT_INITIALIZED bit in the tty_port::iflags field. Introduce helpers tty_port_set_initialized() and tty_port_initialized() to abstract atomic bit ops. Note: the transforms for test_and_set_bit() and test_and_clear_bit() are unnecessary as the state transitions are already mutually exclusive; the tty lock prevents concurrent open/close/hangup. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13cdc-acm: fix crash if flushed with nothing bufferedOliver Neukum1-0/+4
Under some circumstances acm_tty_flush_chars() is called with no buffer to flush. We simply need to do nothing. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-18USB: cdc-acm: more sanity checkingOliver Neukum1-0/+3
An attack has become available which pretends to be a quirky device circumventing normal sanity checks and crashes the kernel by an insufficient number of interfaces. This patch adds a check to the code path for quirky devices. Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20usb: usbtmc: Fix disconnect/poll interactionDave Penkler1-1/+2
When the device is disconnected poll waiters were not being woken. Changes for v2: - add commit summary - add Fixes and Reported-by tags Fixes: eb6b92ecc0f9 ("Add support for receiving USBTMC USB488 SRQ notifications via poll/select") Reported-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-14cdc-acm: implement put_char() and flush_chars()Oliver Neukum2-0/+68
This should cut down latencies and waste if the tty layer writes single bytes. Signed-off-by: Oliver Neukum >oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03Add ioctls to enable and disable local controls on an instrumentDave Penkler1-0/+70
These ioctls provide support for the USBTMC-USB488 control requests for REN_CONTROL, GO_TO_LOCAL and LOCAL_LOCKOUT Signed-off-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03Add ioctl to retrieve USBTMC-USB488 capabilitiesDave Penkler1-0/+12
This is a convenience function to obtain an instrument's capabilities from its file descriptor without having to access sysfs from the user program. Signed-off-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03Add support for receiving USBTMC USB488 SRQ notifications via poll/selectDave Penkler1-0/+23
Background: In many situations operations on multiple instruments need to be synchronized. poll/select provide a convenient way of waiting on a number of different instruments and other peripherals simultaneously. Signed-off-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03Add support for USBTMC USB488 SRQ notification with fasyncDave Penkler1-0/+24
Background: By configuring an instrument's event status register various conditions can be reported via an SRQ notification. This complements the synchronous polling approach using the READ_STATUS_BYTE ioctl with an asynchronous notification. Signed-off-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.Dave Penkler1-0/+201
Background: When performing a read on an instrument that is executing a function that runs longer than the USB timeout the instrument may hang and require a device reset to recover. The READ_STATUS_BYTE operation always returns even when the instrument is busy permitting to poll for the appropriate condition. This capability is referred to in instrument application notes on synchronizing acquisitions for other platforms. Signed-off-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24cdc-acm:exclude Samsung phone 04e8:685dOliver Neukum1-0/+5
This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: cdc-acm: send zero packet for intel 7260 modemLu Baolu2-0/+7
For Intel 7260 modem, it is needed for host side to send zero packet if the BULK OUT size is equal to USB endpoint max packet length. Otherwise, modem side may still wait for more data and cannot give response to host side. Signed-off-by: Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24usb: cdc-acm: handle unlinked urb in acm read callbackLu Baolu1-1/+2
In current acm driver, the bulk-in callback function ignores the URBs unlinked in usb core. This causes unexpected data loss in some cases. For example, runtime suspend entry will unlinked all urbs and set urb->status to -ENOENT even those urbs might have data not processed yet. Hence, data loss occurs. This patch lets bulk-in callback function handle unlinked urbs to avoid data loss. Signed-off-by: Tang Jian Qiang <jianqiang.tang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-23USB: cdc_acm: Ignore Infineon Flash Loader utilityJonas Jonsson1-0/+5
Some modems, such as the Telit UE910, are using an Infineon Flash Loader utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC Data). The latter can be used as a serial interface to upgrade the firmware of the modem. However, that isn't possible when the cdc-acm driver takes control of the device. The following is an explanation of the behaviour by Daniele Palmas during discussion on linux-usb. "This is what happens when the device is turned on (without modifying the drivers): [155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci [155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 [155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041 [155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device This is the flashing device that is caught by the cdc-acm driver. Once the ttyACM appears, the application starts sending a magic string (simple write on the file descriptor) to keep the device in flashing mode. If this magic string is not properly received in a certain time interval, the modem goes on in normal operative mode: [155493.748094] usb 1-3: USB disconnect, device number 27 [155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci [155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021 [155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM [155495.059989] usb 1-3: Manufacturer: Telit [155495.059992] usb 1-3: SerialNumber: 359658044004697 [155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device [155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device [155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device [155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device [155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device [155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14 Using the cdc-acm driver, the string, though being sent in the same way than using the usb-serial-simple driver (I can confirm that the data is passing properly since I used an hw usb sniffer), does not make the device to stay in flashing mode." Signed-off-by: Jonas Jonsson <jonas@ludd.ltu.se> Tested-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 08:47:37 +0000