summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea
AgeCommit message (Collapse)AuthorFilesLines
2020-07-29Merge tag 'usb-ci-v5.9-rc1' of ↵Greg Kroah-Hartman5-4/+37
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: ENDIAN issue fix and one query controller role API is introduced. * tag 'usb-ci-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: imx: get available runtime dr mode for wakeup setting usb: chipidea: add query_available_role interface Documentation: ABI: usb: chipidea: Update Li Jun's e-mail usb: chipidea: udc: fix the ENDIAN issue
2020-07-28usb: chipidea: imx: get available runtime dr mode for wakeup settingPeter Chen3-2/+7
If runtime dr_mode is not dual-role, it doesn't need to enable ID wakeup interrupt. If runtime dr_mode is host, it doesn't need to enable VBUS wakeup interrupt. With these changes, the user will not get the unexpected wakeup for single role use case. For example, the host-only use case at Micro-AB port, the controller should not be waken up by only plug in Micro-AB cable or the Micro-B cable with host. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-07-28usb: chipidea: add query_available_role interfacePeter Chen1-0/+27
The glue layer may need to know current available role to do some setting, eg, the wakeup setting. So we add ci_hdrc_query_available_role for that. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-07-20Merge 5.8-rc6 into usb-nextGreg Kroah-Hartman1-0/+24
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: ci_hdrc_pci: Fix improper use of kerneldoc formatLee Jones1-1/+1
No attempt has been made to document any of the structure's properties here. Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/ci_hdrc_pci.c:132: warning: cannot understand function prototype: 'const struct pci_device_id ci_hdrc_pci_id_table[] = ' Cc: Peter Chen <Peter.Chen@nxp.com> Cc: David Lopo <dlopo@chipidea.mips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200706133341.476881-3-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: usbmisc_imx: Demote obvious misuse of kerneldoc to standard ↵Lee Jones1-1/+1
comment block No attempt has been made to document the demoted function here. Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/usbmisc_imx.c:801: warning: Function parameter or member 'data' not described in 'imx7d_charger_detection' Cc: Peter Chen <Peter.Chen@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-24-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: udc: Fix a few kerneldoc issuesLee Jones1-2/+6
Descriptions were missing for 'ci' almost throughout. There was one instance of over-documenting. Finally one function argument was incorrectly documented (probably down to bitrot). Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:245: warning: Function parameter or member 'ci' not described in 'hw_port_is_high_speed' drivers/usb/chipidea/udc.c:271: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_intr_active' drivers/usb/chipidea/udc.c:285: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_setup_guard' drivers/usb/chipidea/udc.c:296: warning: Function parameter or member 'ci' not described in 'hw_test_and_set_setup_guard' drivers/usb/chipidea/udc.c:321: warning: Function parameter or member 'ci' not described in 'hw_usb_reset' drivers/usb/chipidea/udc.c:628: warning: Excess function parameter 'ci' description in 'free_pending_td' drivers/usb/chipidea/udc.c:655: warning: Function parameter or member 'hwep' not described in '_hardware_dequeue' drivers/usb/chipidea/udc.c:655: warning: Excess function parameter 'gadget' description in '_hardware_dequeue' Cc: Peter Chen <Peter.Chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-18-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: udc: Help out kerneldoc headers that have tried, demote the ↵Lee Jones1-17/+17
others Help with adding the odd description where they have been omitted or where the format isn't quite right. Demote all function headers which are lacking any attempt of describing their arguments. Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:645: warning: Function parameter or member 'hwreq' not described in '_hardware_dequeue' drivers/usb/chipidea/udc.c:645: warning: Excess function parameter 'gadget' description in '_hardware_dequeue' drivers/usb/chipidea/udc.c:1326: warning: Function parameter or member 'ep' not described in 'ep_enable' drivers/usb/chipidea/udc.c:1326: warning: Function parameter or member 'desc' not described in 'ep_enable' drivers/usb/chipidea/udc.c:1393: warning: Function parameter or member 'ep' not described in 'ep_disable' drivers/usb/chipidea/udc.c:1433: warning: Function parameter or member 'ep' not described in 'ep_alloc_request' drivers/usb/chipidea/udc.c:1433: warning: Function parameter or member 'gfp_flags' not described in 'ep_alloc_request' drivers/usb/chipidea/udc.c:1454: warning: Function parameter or member 'ep' not described in 'ep_free_request' drivers/usb/chipidea/udc.c:1454: warning: Function parameter or member 'req' not described in 'ep_free_request' drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'ep' not described in 'ep_queue' drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'req' not described in 'ep_queue' drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'gfp_flags' not described in 'ep_queue' drivers/usb/chipidea/udc.c:1512: warning: Function parameter or member 'ep' not described in 'ep_dequeue' drivers/usb/chipidea/udc.c:1512: warning: Function parameter or member 'req' not described in 'ep_dequeue' drivers/usb/chipidea/udc.c:1556: warning: Function parameter or member 'ep' not described in 'ep_set_halt' drivers/usb/chipidea/udc.c:1556: warning: Function parameter or member 'value' not described in 'ep_set_halt' drivers/usb/chipidea/udc.c:1566: warning: Function parameter or member 'ep' not described in 'ep_set_wedge' drivers/usb/chipidea/udc.c:1586: warning: Function parameter or member 'ep' not described in 'ep_fifo_flush' drivers/usb/chipidea/udc.c:1610: warning: cannot understand function prototype: 'const struct usb_ep_ops usb_ep_ops = ' drivers/usb/chipidea/udc.c:1629: warning: Function parameter or member '_gadget' not described in 'ci_hdrc_gadget_connect' drivers/usb/chipidea/udc.c:1629: warning: Function parameter or member 'is_active' not described in 'ci_hdrc_gadget_connect' drivers/usb/chipidea/udc.c:1780: warning: cannot understand function prototype: 'const struct usb_gadget_ops usb_gadget_ops = ' drivers/usb/chipidea/udc.c:1931: warning: Function parameter or member 'gadget' not described in 'ci_udc_stop' drivers/usb/chipidea/udc.c:1965: warning: Function parameter or member 'ci' not described in 'udc_irq' drivers/usb/chipidea/udc.c:2095: warning: Function parameter or member 'ci' not described in 'ci_hdrc_gadget_destroy' drivers/usb/chipidea/udc.c:2144: warning: Function parameter or member 'ci' not described in 'ci_hdrc_gadget_init' Cc: Peter Chen <Peter.Chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-13-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: udc: Add missing descriptions for function arg 'ci'Lee Jones1-1/+11
Looks like a very popular argument to omit descriptions for. Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:80: warning: Function parameter or member 'ci' not described in 'hw_device_state' drivers/usb/chipidea/udc.c:100: warning: Function parameter or member 'ci' not described in 'hw_ep_flush' drivers/usb/chipidea/udc.c:121: warning: Function parameter or member 'ci' not described in 'hw_ep_disable' drivers/usb/chipidea/udc.c:136: warning: Function parameter or member 'ci' not described in 'hw_ep_enable' drivers/usb/chipidea/udc.c:170: warning: Function parameter or member 'ci' not described in 'hw_ep_get_halt' drivers/usb/chipidea/udc.c:185: warning: Function parameter or member 'ci' not described in 'hw_ep_prime' drivers/usb/chipidea/udc.c:215: warning: Function parameter or member 'ci' not described in 'hw_ep_set_halt' drivers/usb/chipidea/udc.c:238: warning: Function parameter or member 'ci' not described in 'hw_port_is_high_speed' drivers/usb/chipidea/udc.c:251: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_complete' drivers/usb/chipidea/udc.c:263: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_intr_active' drivers/usb/chipidea/udc.c:277: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_setup_guard' drivers/usb/chipidea/udc.c:288: warning: Function parameter or member 'ci' not described in 'hw_test_and_set_setup_guard' drivers/usb/chipidea/udc.c:300: warning: Function parameter or member 'ci' not described in 'hw_usb_set_address' drivers/usb/chipidea/udc.c:312: warning: Function parameter or member 'ci' not described in 'hw_usb_reset' Cc: Peter Chen <Peter.Chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-12-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: debug: Demote obvious misuse of kerneldoc to standard comment ↵Lee Jones1-5/+5
blocks No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/debug.c:25: warning: Function parameter or member 's' not described in 'ci_device_show' drivers/usb/chipidea/debug.c:25: warning: Function parameter or member 'data' not described in 'ci_device_show' drivers/usb/chipidea/debug.c:54: warning: Function parameter or member 's' not described in 'ci_port_test_show' drivers/usb/chipidea/debug.c:54: warning: Function parameter or member 'data' not described in 'ci_port_test_show' drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'file' not described in 'ci_port_test_write' drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'ubuf' not described in 'ci_port_test_write' drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'count' not described in 'ci_port_test_write' drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'ppos' not described in 'ci_port_test_write' drivers/usb/chipidea/debug.c:122: warning: Function parameter or member 's' not described in 'ci_qheads_show' drivers/usb/chipidea/debug.c:122: warning: Function parameter or member 'data' not described in 'ci_qheads_show' drivers/usb/chipidea/debug.c:154: warning: Function parameter or member 's' not described in 'ci_requests_show' drivers/usb/chipidea/debug.c:154: warning: Function parameter or member 'data' not described in 'ci_requests_show' Cc: Peter Chen <Peter.Chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-11-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: otg: Fix kerneldoc issues relating to description of 'ci'Lee Jones1-2/+4
Firstly we add some missing descriptions. Then we fix some formatting issues. Kerneldoc expects arguments to be in the format '@.*: '. If either the '@' or ':' is omitted, kerneldoc gets confused. Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/otg.c:29: warning: Function parameter or member 'ci' not described in 'hw_read_otgsc' drivers/usb/chipidea/otg.c:82: warning: Function parameter or member 'ci' not described in 'hw_write_otgsc' drivers/usb/chipidea/otg.c:235: warning: Function parameter or member 'ci' not described in 'ci_hdrc_otg_init' drivers/usb/chipidea/otg.c:254: warning: Function parameter or member 'ci' not described in 'ci_hdrc_otg_destroy' Cc: Peter Chen <Peter.Chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-10-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: core: Document hw_port_test_set()'s missing 'ci' argumentLee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/core.c:163: warning: Function parameter or member 'ci' not described in 'hw_port_test_set' Cc: Peter Chen <Peter.Chen@nxp.com> Cc: David Lopo <dlopo@chipidea.mips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-8-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-07usb: chipidea: core: add wakeup support for extconPeter Chen1-0/+24
If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: <stable@vger.kernel.org> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by: Philippe Schenker <philippe.schenker@toradex.com> Tested-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24USB: ch9: add "USB_" prefix in front of TEST definesGreg Kroah-Hartman1-5/+5
For some reason, the TEST_ defines in the usb/ch9.h files did not have the USB_ prefix on it, making it a bit confusing when reading the file, as well as not the nicest thing to do in a uapi file. So fix that up and add the USB_ prefix on to them, and fix up all in-kernel usages. This included deleting the duplicate copy in the net2272.h file. Cc: Felipe Balbi <balbi@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Pawel Laszczak <pawell@cadence.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jules Irenge <jbi.octave@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Cc: Rob Gill <rrobgill@protonmail.com> Cc: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Bin Liu <b-liu@ti.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200618144206.2655890-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-10usb: chipidea: udc: fix the ENDIAN issuePeter Chen1-2/+3
Fix the ENDIAN issue when assign dTD entry. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-26Merge tag 'usb-ci-v5.8-rc1' of ↵Greg Kroah-Hartman11-176/+545
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: - Some improvments for ci_hdrc_usb2.c - Support imx7d USB charger - Add software sg support for UDC - Enable user trigger role switch * tag 'usb-ci-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: Enable user-space triggered role-switching usb: chipidea: udc: add software sg list support usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulp usb: chipidea: pull down dp for possible charger detection operation usb: chipidea: introduce imx7d USB charger detection usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use usb: chipidea: usb2: remove unneeded semicolon usb: chipidea: allow disabling glue drivers if EMBEDDED usb: chipidea: usb2: absorb zevio glue driver usb: chipidea: usb2: make clock optional usb: chipidea: usb2: fix formatting usb: chipidea: usb2: constify zynq_pdata usb: chipidea: core: show the real pointer value for register usb: chipidea: core: refine the description for this driver usb: chipidea: udc: fix the kernel doc for udc.h
2020-05-07usb: chipidea: msm: Ensure proper controller reset using role switch APIBryan O'Donoghue1-1/+1
Currently we check to make sure there is no error state on the extcon handle for VBUS when writing to the HS_PHY_GENCONFIG_2 register. When using the USB role-switch API we still need to write to this register absent an extcon handle. This patch makes the appropriate update to ensure the write happens if role-switching is true. Fixes: 05559f10ed79 ("usb: chipidea: add role switch class support") Cc: stable <stable@vger.kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200507004918.25975-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-06usb: chipidea: Enable user-space triggered role-switchingBryan O'Donoghue1-0/+1
The flag provided by the USB role-switch logic allow_userspace_control allows user-space to trigger a role-switch. Several other USB controller drivers already enable this feature. Let's switch it on for the chipidea core now also. Cc: Peter Chen <Peter.Chen@nxp.com> Cc: Jun Li <jun.li@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06usb: chipidea: udc: add software sg list supportPeter Chen3-32/+133
The chipidea controller doesn't support short transfer for sg list, so we still keep setting IOC per TD, otherwise, there will be no interrupt for short transfer. Each TD has five entries for data buffer, each data buffer could be non-countinuous 4KB buffer, so it could handle up to 5 sg buffers one time. The benefit of this patch is avoiding OOM for low memory system(eg, 256MB) during large USB transfers, see below for detail. The non-sg handling has not changed. ufb: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 2 PID: 370 Comm: ufb Not tainted 5.4.3-1.1.0+g54b3750d61fd #1 Hardware name: NXP i.MX8MNano DDR4 EVK board (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xb4/0xf8 warn_alloc+0xec/0x158 __alloc_pages_slowpath+0x9cc/0x9f8 __alloc_pages_nodemask+0x21c/0x280 alloc_pages_current+0x7c/0xe8 kmalloc_order+0x1c/0x88 __kmalloc+0x25c/0x298 ffs_epfile_io.isra.0+0x20c/0x7d0 ffs_epfile_read_iter+0xa8/0x188 new_sync_read+0xe4/0x170 __vfs_read+0x2c/0x40 vfs_read+0xc8/0x1a0 ksys_read+0x68/0xf0 __arm64_sys_read+0x18/0x20 el0_svc_common.constprop.0+0x68/0x160 el0_svc_handler+0x20/0x80 el0_svc+0x8/0xc Mem-Info: active_anon:2856 inactive_anon:5269 isolated_anon:12 active_file:5238 inactive_file:18803 isolated_file:0 unevictable:0 dirty:22 writeback:416 unstable:0 slab_reclaimable:4073 slab_unreclaimable:3408 mapped:727 shmem:7393 pagetables:37 bounce:0 free:4104 free_pcp:118 free_cma:0 Node 0 active_anon:11436kB inactive_anon:21076kB active_file:20988kB inactive_file:75216kB unevictable:0kB isolated(ano Node 0 DMA32 free:16820kB min:1808kB low:2260kB high:2712kB active_anon:11436kB inactive_anon:21076kB active_file:2098B lowmem_reserve[]: 0 0 0 Node 0 DMA32: 508*4kB (UME) 242*8kB (UME) 730*16kB (UM) 21*32kB (UME) 5*64kB (UME) 2*128kB (M) 0*256kB 0*512kB 0*1024kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB 31455 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 65536 pages RAM 0 pages HighMem/MovableOnly 10766 pages reserved 0 pages cma reserved 0 pages hwpoisoned Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulpPeter Chen1-5/+84
imx7ulp uses different USB PHY with imx7d (MXS PHY vs PICO PHY), so the features are supported by non-core register are a little different. For example, autoresume feature is supported by all controllers for imx7ulp, but for imx7d, it is only supported by non-HSIC controller. Besides, these two platforms use different HSIC controller, imx7ulp needs software operation, but imx7d doesn't. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06usb: chipidea: pull down dp for possible charger detection operationPeter Chen1-1/+4
The bootloader may use device mode, and keep dp up. We need dp to be pulled down before possbile charger detection operation. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06usb: chipidea: introduce imx7d USB charger detectionJun Li3-1/+259
imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver. The USB generic PHY driver is impossible to have a charger detection for every user, so we implement USB charger detection routine at glue layer. After the detection has finished, it will notify USB PHY charger framework, and the uevents will be triggered. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer usePeter Chen1-1/+6
Some vendors glue layer need to handle some events for vbus, eg, some i.mx platforms (imx7d, imx8mm, imx8mn, etc) needs vbus event to handle charger detection, its charger detection is finished at glue layer code, but not at USB PHY driver. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-04-29usb: chipidea: usb2: remove unneeded semicolonJason Yan1-1/+1
Fix the following coccicheck warning: drivers/usb/chipidea/ci_hdrc_usb2.c:75:28-29: Unneeded semicolon Fixes: c2de37b31f17 ("usb: chipidea: usb2: make clock optional") Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-04-08usb: chipidea: allow disabling glue drivers if EMBEDDEDMichał Mirosław2-18/+31
Allow to cut down on driver size for embedded config. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-04-08usb: chipidea: usb2: absorb zevio glue driverMichał Mirosław3-68/+6
ZEVIO glue code is is identical to generic binding now, but doesn't enable runtime PM. Let's squash the driver and get runtime PM for free. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-04-08usb: chipidea: usb2: make clock optionalMichał Mirosław1-9/+9
Allow clock to be missing from DT (assume it's enabled then). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-04-08usb: chipidea: usb2: fix formattingMichał Mirosław1-2/+2
Add spaces before closing braces. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-04-08usb: chipidea: usb2: constify zynq_pdataMichał Mirosław1-1/+1
pdata is copied anyway to allow setting device name. Make the source const. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-30Merge tag 'pm-5.7-rc1' of ↵Linus Torvalds1-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These clean up and rework the PM QoS API, address a suspend-to-idle wakeup regression on some ACPI-based platforms, clean up and extend a few cpuidle drivers, update multiple cpufreq drivers and cpufreq documentation, and fix a number of issues in devfreq and several other things all over. Specifics: - Clean up and rework the PM QoS API to simplify the code and reduce the size of it (Rafael Wysocki). - Fix a suspend-to-idle wakeup regression on Dell XPS13 9370 and similar platforms where the USB plug/unplug events are handled by the EC (Rafael Wysocki). - CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki, Ulf Hansson). - Extend the haltpoll cpuidle driver so that it can be forced to run on some systems where it refused to load (Maciej Szmigiero). - Convert several cpufreq documents to the .rst format and move the legacy driver documentation into one common file (Mauro Carvalho Chehab, Rafael Wysocki). - Update several cpufreq drivers: * Extend and fix the imx-cpufreq-dt driver (Anson Huang). * Improve the -EPROBE_DEFER handling and fix unwanted CPU overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang, Christoph Niedermaier). * Add support for Krait based SoCs to the qcom driver (Ansuel Smith). * Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla). * Add platform specific intermediate callbacks support to cpufreq-dt and update the imx6q driver (Peng Fan). * Simplify and consolidate some pieces of the intel_pstate driver and update its documentation (Rafael Wysocki, Alex Hung). - Fix several devfreq issues: * Remove unneeded extern keyword from a devfreq header file and use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of DEVFREQ_GOV_INTERNAL (Chanwoo Choi). * Fix the handling of dev_pm_qos_remove_request() result (Leonard Crestez). * Use constant name for userspace governor (Pierre Kuo). * Get rid of doc warnings and fix a typo (Christophe JAILLET). - Use built-in RCU list checking in some places in the PM core to avoid false-positive RCU usage warnings (Madhuparna Bhowmik). - Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level PM QoS routines (Qian Cai). - Fix removal of wakeup sources to avoid NULL pointer dereferences in a corner case (Neeraj Upadhyay). - Clean up the handling of hibernate compat ioctls and fix the related documentation (Eric Biggers). - Update the idle_inject power capping driver to use variable-length arrays instead of zero-length arrays (Gustavo Silva). - Fix list format in a PM QoS document (Randy Dunlap). - Make the cpufreq stats module use scnprintf() to avoid potential buffer overflows (Takashi Iwai). - Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus). - Allow no domain-idle-states DT property in generic PM domains (Ulf Hansson). - Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (78 commits) cpufreq: intel_pstate: Simplify intel_pstate_cpu_init() tools/power/x86/intel_pstate_tracer: fix a broken y-axis scale ACPI: PM: s2idle: Refine active GPEs check ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there PM / devfreq: Get rid of some doc warnings PM / devfreq: Fix handling dev_pm_qos_remove_request result PM / devfreq: Fix a typo in a comment PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name PM / devfreq: Remove unneeded extern keyword PM / devfreq: Use constant name of userspace governor ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late() cpufreq: qcom: Add support for krait based socs cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling cpufreq: Use scnprintf() for avoiding potential buffer overflow cpuidle: psci: Split psci_dt_cpu_init_idle() PM / Domains: Allow no domain-idle-states DT property in genpd when parsing PM / hibernate: Remove unnecessary compat ioctl overrides PM: hibernate: fix docs for ioctls that return loff_t via pointer Documentation: intel_pstate: update links for references ...
2020-03-30Merge branch 'pm-qos'Rafael J. Wysocki1-7/+5
* pm-qos: (30 commits) PM: QoS: annotate data races in pm_qos_*_value() Documentation: power: fix pm_qos_interface.rst format warning PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE Documentation: PM: QoS: Update to reflect previous code changes PM: QoS: Update file information comments PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions sound: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*() drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*() x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*() cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request() PM: QoS: Add CPU latency QoS API wrappers PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h PM: QoS: Simplify definitions of CPU latency QoS trace events ...
2020-03-30usb: chipidea: core: show the real pointer value for registerPeter Chen1-1/+1
The pointer value is "ptrval" like below at current code: ci_hdrc ci_hdrc.0: ChipIdea HDRC found, revision: 25, lpm: 0; cap: (ptrval) op: (ptrval) According to Documentation/core-api/printk-formats.rst, we change it from %p to %px for real value. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-30usb: chipidea: core: refine the description for this driverPeter Chen1-33/+7
Some descriptions are outdated, update them. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-30usb: chipidea: udc: fix the kernel doc for udc.hPeter Chen1-4/+1
The kernel doc for td_node is outdated, update it. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-23Merge 5.6-rc7 into usb-nextGreg Kroah-Hartman1-3/+4
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: chipidea: udc: fix sleeping function called from invalid contextPeter Chen1-3/+4
The code calls pm_runtime_get_sync with irq disabled, it causes below warning: BUG: sleeping function called from invalid context at wer/runtime.c:1075 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: er/u8:1 CPU: 1 PID: 37 Comm: kworker/u8:1 Not tainted 20200304-00181-gbebfd2a5be98 #1588 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: ci_otg ci_otg_work [<c010e8bd>] (unwind_backtrace) from [<c010a315>] 1/0x14) [<c010a315>] (show_stack) from [<c0987d29>] 5/0x94) [<c0987d29>] (dump_stack) from [<c013e77f>] +0xeb/0x118) [<c013e77f>] (___might_sleep) from [<c052fa1d>] esume+0x75/0x78) [<c052fa1d>] (__pm_runtime_resume) from [<c0627a33>] 0x23/0x74) [<c0627a33>] (ci_udc_pullup) from [<c062fb93>] nect+0x2b/0xcc) [<c062fb93>] (usb_gadget_connect) from [<c062769d>] _connect+0x59/0x104) [<c062769d>] (ci_hdrc_gadget_connect) from [<c062778b>] ssion+0x43/0x48) [<c062778b>] (ci_udc_vbus_session) from [<c062f997>] s_connect+0x17/0x9c) [<c062f997>] (usb_gadget_vbus_connect) from [<c062634d>] bd/0x128) [<c062634d>] (ci_otg_work) from [<c0134719>] rk+0x149/0x404) [<c0134719>] (process_one_work) from [<c0134acb>] 0xf7/0x3bc) [<c0134acb>] (worker_thread) from [<c0139433>] x118) [<c0139433>] (kthread) from [<c01010bd>] (ret_from_fork+0x11/0x34) Tested-by: Dmitry Osipenko <digetx@gmail.com> Cc: <stable@vger.kernel.org> #v5.5 Fixes: 72dc8df7920f ("usb: chipidea: udc: protect usb interrupt enable") Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200316031034.17847-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-16USB: chipidea: Use the correct style for SPDX License IdentifierNishad Kamdar6-6/+6
This patch corrects the SPDX License Identifier style in header files related to ChipIdea Highspeed Dual Role Controller. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml.org%2Flkml%2F2019%2F2%2F7%2F46&amp;data=02%7C01%7CPeter.Chen%40nxp.com%7Cbea69ff84b574ca6b48e08d7c8cf58cf%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637198665199494622&amp;sdata=bk1n4%2BvnrfRS6ZDrps%2BuXiImdzaxKZ00YskBg6pjtn4%3D&amp;reserved=0. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-16usb: chipidea: otg: handling vbus disconnect event occurred during system ↵Peter Chen1-0/+7
suspend During system suspend, the role switch may occur, eg, from gadget->host. In this case, the vbus disconnect event is lost, we add this handling in role switch routine in this commit. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-16usb: chipidea: udc: using structure ci_hdrc device for runtime PMPeter Chen1-8/+5
At current code, it doesn't maintain ci->gadget.dev's runtime PM status well, eg, during the PM operation, the PM counter for ci->gadget.dev doesn't be changed accordingly. In this commit, we use ci_hdrc device instead of ci->gadget.dev for runtime PM APIs at udc driver, in the way, we handle runtime PM APIs using unify device structure between core and udc driver. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-04usb: roles: Provide the switch drivers handle to the switch in the APIHeikki Krogerus1-4/+6
The USB role callback functions had a parameter pointing to the parent device (struct device) of the switch. The assumption was that the switch parent is always the controller. Firstly, that may not be true in every case, and secondly, it prevents us from supporting devices that supply multiple muxes. Changing the first parameter of usb_role_switch_set_t and usb_role_switch_get_t from struct device to struct usb_role_switch. Cc: Peter Chen <Peter.Chen@nxp.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Bin Liu <b-liu@ti.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200302135353.56659-6-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*()Rafael J. Wysocki1-7/+5
Call cpu_latency_qos_add/remove_request() instead of pm_qos_add/remove_request(), respectively, because the latter are going to be dropped. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
2020-01-22usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not definedJun Li1-1/+1
Otherwise, there is a build warning if this header file is included by non host source file, eg, otg.c. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200122014639.22667-3-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-22usb: chipidea: handle single role for usb role classJun Li2-1/+13
If usb port is configed to be single role, but usb role class is trying to set unavailable role, don't try to do role change. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200122014639.22667-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13Merge 5.5-rc6 into usb-nextGreg Kroah-Hartman1-1/+3
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09usb: chipidea: tegra: Add USB_TEGRA_PHY to driver's dependenciesDmitry Osipenko1-0/+1
Add build dependency on USB_TEGRA_PHY since UDC driver isn't usable without the PHY. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200106013416.9604-19-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09usb: chipidea: tegra: Stop managing PHY's powerDmitry Osipenko1-9/+0
Tegra's USB PHY driver now provides generic PHY init/shutdown callbacks and thus the custom PHY management could be removed from Tegra-specific part of the ChipIdea driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200106013416.9604-18-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: chipidea: host: Disable port power only if previously enabledGuenter Roeck1-1/+3
On shutdown, ehci_power_off() is called unconditionally to power off each port, even if it was never called to power on the port. For chipidea, this results in a call to ehci_ci_portpower() with a request to power off ports even if the port was never powered on. This results in the following warning from the regulator code. WARNING: CPU: 0 PID: 182 at drivers/regulator/core.c:2596 _regulator_disable+0x1a8/0x210 unbalanced disables for usb_otg2_vbus Modules linked in: CPU: 0 PID: 182 Comm: init Not tainted 5.4.6 #1 Hardware name: Freescale i.MX7 Dual (Device Tree) [<c0313658>] (unwind_backtrace) from [<c030d698>] (show_stack+0x10/0x14) [<c030d698>] (show_stack) from [<c1133afc>] (dump_stack+0xe0/0x10c) [<c1133afc>] (dump_stack) from [<c0349098>] (__warn+0xf4/0x10c) [<c0349098>] (__warn) from [<c0349128>] (warn_slowpath_fmt+0x78/0xbc) [<c0349128>] (warn_slowpath_fmt) from [<c09f36ac>] (_regulator_disable+0x1a8/0x210) [<c09f36ac>] (_regulator_disable) from [<c09f374c>] (regulator_disable+0x38/0xe8) [<c09f374c>] (regulator_disable) from [<c0df7bac>] (ehci_ci_portpower+0x38/0xdc) [<c0df7bac>] (ehci_ci_portpower) from [<c0db4fa4>] (ehci_port_power+0x50/0xa4) [<c0db4fa4>] (ehci_port_power) from [<c0db5420>] (ehci_silence_controller+0x5c/0xc4) [<c0db5420>] (ehci_silence_controller) from [<c0db7644>] (ehci_stop+0x3c/0xcc) [<c0db7644>] (ehci_stop) from [<c0d5bdc4>] (usb_remove_hcd+0xe0/0x19c) [<c0d5bdc4>] (usb_remove_hcd) from [<c0df7638>] (host_stop+0x38/0xa8) [<c0df7638>] (host_stop) from [<c0df2f34>] (ci_hdrc_remove+0x44/0xe4) ... Keeping track of the power enable state avoids the warning and traceback. Fixes: c8679a2fb8dec ("usb: chipidea: host: add portpower override") Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Peter Chen <peter.chen@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191226155754.25451-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-18usb: chipidea: imx: pinctrl for HSIC is optionalPeter Chen1-28/+35
For imx chipidea controllers, if they use mxs PHY, they need pinctrl for HSIC. Otherwise, it doesn't need pinctrl and usbmisc control. Like imx7d and imx8mm. Reported-by: André Draszik <git@andred.net> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-11-18usb: chipidea: imx: refine the error handling for hsicPeter Chen1-6/+9
- -EPROBE_DEFER is an error, but without need show error message - If pintrol is not existed, as pintrol is NULL Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-11-18usb: chipidea: imx: change hsic power regulator as optionalPeter Chen1-1/+2
Not every platform needs this regulator. Signed-off-by: Peter Chen <peter.chen@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 03:07:57 +0000