summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea/udc.h
AgeCommit message (Collapse)AuthorFilesLines
2020-05-06usb: chipidea: udc: add software sg list supportPeter Chen1-0/+1
The chipidea controller doesn't support short transfer for sg list, so we still keep setting IOC per TD, otherwise, there will be no interrupt for short transfer. Each TD has five entries for data buffer, each data buffer could be non-countinuous 4KB buffer, so it could handle up to 5 sg buffers one time. The benefit of this patch is avoiding OOM for low memory system(eg, 256MB) during large USB transfers, see below for detail. The non-sg handling has not changed. ufb: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 2 PID: 370 Comm: ufb Not tainted 5.4.3-1.1.0+g54b3750d61fd #1 Hardware name: NXP i.MX8MNano DDR4 EVK board (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xb4/0xf8 warn_alloc+0xec/0x158 __alloc_pages_slowpath+0x9cc/0x9f8 __alloc_pages_nodemask+0x21c/0x280 alloc_pages_current+0x7c/0xe8 kmalloc_order+0x1c/0x88 __kmalloc+0x25c/0x298 ffs_epfile_io.isra.0+0x20c/0x7d0 ffs_epfile_read_iter+0xa8/0x188 new_sync_read+0xe4/0x170 __vfs_read+0x2c/0x40 vfs_read+0xc8/0x1a0 ksys_read+0x68/0xf0 __arm64_sys_read+0x18/0x20 el0_svc_common.constprop.0+0x68/0x160 el0_svc_handler+0x20/0x80 el0_svc+0x8/0xc Mem-Info: active_anon:2856 inactive_anon:5269 isolated_anon:12 active_file:5238 inactive_file:18803 isolated_file:0 unevictable:0 dirty:22 writeback:416 unstable:0 slab_reclaimable:4073 slab_unreclaimable:3408 mapped:727 shmem:7393 pagetables:37 bounce:0 free:4104 free_pcp:118 free_cma:0 Node 0 active_anon:11436kB inactive_anon:21076kB active_file:20988kB inactive_file:75216kB unevictable:0kB isolated(ano Node 0 DMA32 free:16820kB min:1808kB low:2260kB high:2712kB active_anon:11436kB inactive_anon:21076kB active_file:2098B lowmem_reserve[]: 0 0 0 Node 0 DMA32: 508*4kB (UME) 242*8kB (UME) 730*16kB (UM) 21*32kB (UME) 5*64kB (UME) 2*128kB (M) 0*256kB 0*512kB 0*1024kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB 31455 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 65536 pages RAM 0 pages HighMem/MovableOnly 10766 pages reserved 0 pages cma reserved 0 pages hwpoisoned Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-30usb: chipidea: udc: fix the kernel doc for udc.hPeter Chen1-4/+1
The kernel doc for td_node is outdated, update it. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-16USB: chipidea: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header files related to ChipIdea Highspeed Dual Role Controller. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml.org%2Flkml%2F2019%2F2%2F7%2F46&amp;data=02%7C01%7CPeter.Chen%40nxp.com%7Cbea69ff84b574ca6b48e08d7c8cf58cf%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637198665199494622&amp;sdata=bk1n4%2BvnrfRS6ZDrps%2BuXiImdzaxKZ00YskBg6pjtn4%3D&amp;reserved=0. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-11-07USB: chipidea: Remove redundant license textGreg Kroah-Hartman1-4/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: chipidea: Properly mark little endian descriptorsStephen Boyd1-6/+6
The DMA descriptors are little endian, and we do a pretty good job of handling them with the proper le32_to_cpu() markings, but we don't actually mark them as __le32. This means checkers like sparse can't easily find new bugs. Let's mark the members of structures properly and fix the few places where we're missing conversions. Cc: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2013-08-14usb: chipidea: add role init and destroy APIsPeter Chen1-0/+6
- The role's init will be called at probe procedure. - The role's destroy will be called at fail patch at probe and driver's removal. - The role's start/stop will be called when specific role has started. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24usb: chipidea: drop "13xxx" infixAlexander Shishkin1-8/+8
"ci13xxx" is bad for at least the following reasons: * people often mistype it * it doesn't add any informational value to the names it's used in * it needlessly attracts mail filters This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending on the situation. Modules with ci13xxx prefix are also renamed accordingly and aliases are added for compatibility. Otherwise, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17usb: chipidea: udc: manage dynamic amount of tds with a linked listMichael Grzeschik1-4/+7
Instead of having a limited number of usable tds in the udc we use a linked list to support dynamic amount of needed tds for all special gadget types. This improves throughput. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17usb: chipidea: udc: configure iso endpointsMichael Grzeschik1-0/+1
This patch adds iso endpoint support to the device controller. It makes use of the multiplication bits in the maxpacket field of the endpoint and calculates the multiplier bits for each transfer description on every request. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05usb: chipidea: udc: fix memory access of shared memory on armv5 machinesMichael Grzeschik1-2/+2
The udc uses an shared dma memory space between hard and software. This memory layout is described in ci13xxx_qh and ci13xxx_td which are marked with the attribute ((packed)). The compiler currently does not know about the alignment of the memory layout, and will create strb and ldrb operations. The Datasheet of the synopsys core describes, that some operations on the mapped memory need to be atomic double word operations. I.e. the next pointer addressing in the qhead, as otherwise the hardware will read wrong data and totally stuck. This is also possible while working with the current active td queue, and preparing the td->ptr.next in software while the hardware is still working with the current active td which is supposed to be changed: writeb(0xde, &td->ptr.next + 0x0); /* strb */ writeb(0xad, &td->ptr.next + 0x1); /* strb */ <----- hardware reads value of td->ptr.next and get stuck! writeb(0xbe, &td->ptr.next + 0x2); /* strb */ writeb(0xef, &td->ptr.next + 0x3); /* strb */ This appeares on armv5 machines where the hardware does not support unaligned 32bit operations. This patch adds the attribute ((aligned(4))) to the structures to tell the compiler to use 32bit operations. It also adds an wmb() for the prepared TD data before it gets enqueued into the qhead. Cc: stable <stable@vger.kernel.org> # v3.5 Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: use generic map/unmap routinesAlexander Shishkin1-2/+0
We're one of the remaining drivers to map/unmap requests by hand. Switch to using generic gadget routines for that instead. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: brush up structure definitionsAlexander Shishkin1-8/+17
Get rid of trailing comments in the structure definitions in favor of kernel-doc. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: add support for rolesAlexander Shishkin1-15/+5
Add some generic code for roles and implement simple role switching based on ID pin state and/or a sysfs file. At this, we also rename the device to ci_hdrc, which is what it is. The "manual" switch is made into a sysfs file and not debugfs, because it might be useful even in non-debug context. For some boards, like sheevaplug, it seems to be the only way to switch roles without modifying the hardware, since the ID pin is always grounded. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: split the driver code into unitsAlexander Shishkin1-0/+96
Split the driver into the following parts: * core -- resources, register access, capabilities, etc; * udc -- device controller functionality; * debug -- logging events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-29 15:17:40 +0000