summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea/host.c
AgeCommit message (Collapse)AuthorFilesLines
2021-08-21usb: chipidea: host: fix port index underflow and UBSAN complainsLi Jun1-3/+11
If wIndex is 0 (and it often is), these calculations underflow and UBSAN complains, here resolve this by not decrementing the index when it is equal to 0, this copies the solution from commit 85e3990bea49 ("USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN") Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1624004938-2399-1-git-send-email-jun.li@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-03-10usb: chipidea: tegra: fix flexible_array.cocci warningskernel test robot1-1/+1
Zero-length and one-element arrays are deprecated, see Documentation/process/deprecated.rst Flexible-array members should be used instead. Generated by: scripts/coccinelle/misc/flexible_array.cocci Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") CC: Peter Geis <pgwipeout@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2102132108040.2720@hadrien Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-13usb: chipidea: tegra: Support host modePeter Geis1-2/+102
Add USB host mode to the Tegra HDRC driver. This allows us to benefit from support provided by the generic ChipIdea driver instead of duplicating the effort in a separate ehci-tegra driver. Tested-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Ion Agorria <ion@agorria.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201218120246.7759-6-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: chipidea: host: Disable port power only if previously enabledGuenter Roeck1-1/+3
On shutdown, ehci_power_off() is called unconditionally to power off each port, even if it was never called to power on the port. For chipidea, this results in a call to ehci_ci_portpower() with a request to power off ports even if the port was never powered on. This results in the following warning from the regulator code. WARNING: CPU: 0 PID: 182 at drivers/regulator/core.c:2596 _regulator_disable+0x1a8/0x210 unbalanced disables for usb_otg2_vbus Modules linked in: CPU: 0 PID: 182 Comm: init Not tainted 5.4.6 #1 Hardware name: Freescale i.MX7 Dual (Device Tree) [<c0313658>] (unwind_backtrace) from [<c030d698>] (show_stack+0x10/0x14) [<c030d698>] (show_stack) from [<c1133afc>] (dump_stack+0xe0/0x10c) [<c1133afc>] (dump_stack) from [<c0349098>] (__warn+0xf4/0x10c) [<c0349098>] (__warn) from [<c0349128>] (warn_slowpath_fmt+0x78/0xbc) [<c0349128>] (warn_slowpath_fmt) from [<c09f36ac>] (_regulator_disable+0x1a8/0x210) [<c09f36ac>] (_regulator_disable) from [<c09f374c>] (regulator_disable+0x38/0xe8) [<c09f374c>] (regulator_disable) from [<c0df7bac>] (ehci_ci_portpower+0x38/0xdc) [<c0df7bac>] (ehci_ci_portpower) from [<c0db4fa4>] (ehci_port_power+0x50/0xa4) [<c0db4fa4>] (ehci_port_power) from [<c0db5420>] (ehci_silence_controller+0x5c/0xc4) [<c0db5420>] (ehci_silence_controller) from [<c0db7644>] (ehci_stop+0x3c/0xcc) [<c0db7644>] (ehci_stop) from [<c0d5bdc4>] (usb_remove_hcd+0xe0/0x19c) [<c0d5bdc4>] (usb_remove_hcd) from [<c0df7638>] (host_stop+0x38/0xa8) [<c0df7638>] (host_stop) from [<c0df2f34>] (ci_hdrc_remove+0x44/0xe4) ... Keeping track of the power enable state avoids the warning and traceback. Fixes: c8679a2fb8dec ("usb: chipidea: host: add portpower override") Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Peter Chen <peter.chen@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191226155754.25451-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-11usb: chipidea: host: override ehci->hub_controlPeter Chen1-0/+75
The chipidea controller has some special requirements during suspend/resume, override common ehci->hub_control to implement it. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-12-11usb: chipidea: add flag for imx hsic implementationPeter Chen1-0/+17
NXP (Freecale) imx HSIC design has some special requirements, add some flags at host code to handle them. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-09-20usb: chipidea: Add dynamic pinctrl selectionLoic Poulain1-0/+9
Some hardware implementations require to configure pins differently according to the USB role (host/device), this can be an update of the pins routing or a simple GPIO value change. This patch introduces new optional "host" and "device" pinctrls. If these pinctrls are defined by the device, they are respectively selected on host/device role start. If a default pinctrl exist, it is restored on host/device role stop. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-06-26usb: chipidea: host: fix disconnection detect issuePeter Chen1-1/+4
The commit 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") delete the assignment for hcd->usb_phy, it causes usb_phy_notify_connect{disconnect) are not called, the USB PHY driver is not notified of hot plug event, then the disconnection will not be detected by hardware. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reported-by: Mats Karrman <mats.dev.list@gmail.com> Tested-by: Mats Karrman <mats.dev.list@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-03-09usb: add a flag to skip PHY initialization to struct usb_hcdMartin Blumenstingl1-4/+2
The USB HCD core driver parses the device-tree node for "phys" and "usb-phys" properties. It also manages the power state of these PHYs automatically. However, drivers may opt-out of this behavior by setting "phy" or "usb_phy" in struct usb_hcd to a non-null value. An example where this is required is the "Qualcomm USB2 controller", implemented by the chipidea driver. The hardware requires that the PHY is only powered on after the "reset completed" event from the controller is received. A follow-up patch will allow the USB HCD core driver to manage more than one PHY. Add a new "skip_phy_initialization" bitflag to struct usb_hcd so drivers can opt-out of any PHY management provided by the USB HCD core driver. This also updates the existing drivers so they use the new flag if they want to opt out of the PHY management provided by the USB HCD core driver. This means that for these drivers the new "multiple PHY" handling (which will be added in a follow-up patch) will be disabled as well. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Peter Chen <peter.chen@nxp.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: chipidea: Remove redundant license textGreg Kroah-Hartman1-13/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: chipidea: use bus->sysdev for DMA configurationArnd Bergmann1-1/+2
Set the dma for chipidea from sysdev. This is inherited from its parent node. Also, do not set dma mask for child as it is not required now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-20usb: chipidea: msm: Handle phy power statesStephen Boyd1-2/+6
The ULPI phy on qcom platforms needs to be initialized and powered on after a USB reset and before we toggle the run/stop bit. Otherwise, the phy locks up and doesn't work properly. Hook the phy initialization into the RESET event and the phy power off into the STOPPED event. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Notify events when switching host modeStephen Boyd1-0/+6
The chipidea/udc.c file sends a CI_HDRC_CONTROLLER_RESET_EVENT to the wrapper drivers when it calls hw_device_reset(), but that function is not called from chipidea/host.c. And the udc.c file sends the CI_HDRC_CONTROLLER_STOPPED_EVENT but the host.c file doesn't do anything. The intent of the reset event is to allow the wrapper driver to do any wrapper specific things after the reset bit has been set in the usb command register. Therefore, add this event hook in the host role after we toggle that bit. Similarly, the intent of the stopped event is to allow the wrapper driver to do any wrapper specific things after the device is stopped. So when we stop the host role, send the stopped event. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-10-25usb: chipidea: host: fix NULL ptr dereference during shutdownStefan Wahren1-0/+2
After commit b09b5224fe86 ("usb: chipidea: implement platform shutdown callback") and commit 43a404577a93 ("usb: chipidea: host: set host to be null after hcd is freed") a NULL pointer dereference is caused on i.MX23 during shutdown. So ensure that role is set to CI_ROLE_END and we finish interrupt handling before the hcd is deallocated. This avoids the NULL pointer dereference. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: b09b5224fe86 ("usb: chipidea: implement platform shutdown callback") Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14usb: chipidea: host: disable io watchdogLucas Stach1-0/+3
The Chipidea EHCI core seems to behave sanely and doesn't need the IO watchdog. This kills off 10 non-deferrable wakeup events per second when the controller is otherwise idle. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2015-12-24usb: chipidea: host: set host to be null after hcd is freedLi Jun1-0/+2
Set ci->hcd and ci->otg.host to be null in host_stop since the hcd already freed. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-08-14usb: chipidea: host: override hcd reset APIPeter Chen1-2/+16
The system configuration API should be called before the controller run, otherwise, undefined results may occur. So, we override hcd reset API, and add system configuration API after controller reset. Cc: Li Jun <peter.chen@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-08-14usb: chipidea: host: delete the redundancy ci_hdrc structPeter Chen1-3/+1
The struct ci_hdrc is the drvdata for hcd device, so we don't need to introduce extra ci_hdrc structure for ehci. Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-08-14usb: chipidea: introduce ci_platform_configurePeter Chen1-8/+1
It is used to configure controller parameters according to platform data, like speed, stream mode, etc, both host and device's initialization need it, most of code are the same for both roles, with this new interface, it can reduce the duplicated code and be easy to maintain in future. Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-08-14usb: chipidea: add ttctrl.ttha control interfacePeter Chen1-0/+3
The register of ttctrl.ttha describes like below: - Internal TT Hub Address Representation - RW - Default = 0000000b This field is used to match against the Hub Address field in QH & siTD to determine if the packet is routed to the internal TT for directly attached FS/LS devices. If the Hub Address in the QH or siTD does not match this address then the packet will be broadcast on the High Speed ports destined for a downstream High Speed hub with the address in the QH/siTD. In silicon RTL, this entry only affects QH and siTD, and the hub.addr at both QH and siTD are 0 in ehci core for chipidea (with hcd->has_tt = 1). So, for QH, if the "usage_tt" flag at RTL is 0, set CI_HDRC_SET_NON_ZERO_TTHA will not affect QH (with non-hs device); for siTD, set this flag will change remaining space requirement for the last transaction from 1023 bytes to 188 bytes, it can increase the number of transactions within one frame, ehci periodic schedule code will not queue the packet if the frame space is full, so it is safe to set this flag for siTD. With this flag, it can fix the problem Alan Stern reported below: http://www.spinics.net/lists/linux-usb/msg123125.html And may fix Michael Tessier's problem too. http://www.spinics.net/lists/linux-usb/msg118679.html CC: stern@rowland.harvard.edu CC: michael.tessier@axiontech.ca Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-07-22usb: chipidea: ehci_init_driver is intended to call one timePeter Chen1-2/+5
The ehci_init_driver is used to initialize hcd APIs for each ehci controller driver, it is designed to be called only one time and before driver register is called. The current design will cause ehci_init_driver is called multiple times at probe process, it will cause hc_driver's initialization affect current running hcd. We run out NULL pointer dereference problem when one hcd is started by module_init, and the other is started by otg thread at SMP platform. The reason for this problem is ehci_init_driver will do memory copy for current uniform hc_driver, and this memory copy will do memset (as 0) first, so when the first hcd is running usb_add_hcd, and the second hcd may clear the uniform hc_driver's space (at ehci_init_driver), then the first hcd will meet NULL pointer at the same time. See below two logs: LOG_1: ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: doesn't support gadget Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = 80004000 [00000014] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-222193-g24b2734-dirty #25 Workqueue: ci_otg ci_otg_work task: d839ec00 ti: d8400000 task.ti: d8400000 PC is at ehci_run+0x4c/0x284 LR is at _raw_spin_unlock_irqrestore+0x28/0x54 pc : [<8041f9a0>] lr : [<8070ea84>] psr: 60000113 sp : d8401e30 ip : 00000000 fp : d8004400 r10: 00000001 r9 : 00000001 r8 : 00000000 r7 : 00000000 r6 : d8419940 r5 : 80dd24c0 r4 : d8419800 r3 : 8001d060 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process kworker/u8:2 (pid: 108, stack limit = 0xd8400238) Stack: (0xd8401e30 to 0xd8402000) 1e20: d87523c0 d8401e48 66667562 d8419800 1e40: 00000000 00000000 d8419800 00000000 00000000 00000000 d84198b0 8040fcdc 1e60: 00000000 80dd320c d8477610 d8419c00 d803d010 d8419800 00000000 00000000 1e80: d8004400 00000000 d8400008 80431494 80431374 d803d100 d803d010 d803d1ac 1ea0: 00000000 80432428 804323d4 d803d100 00000001 80435eb8 80e0d0bc d803d100 1ec0: 00000006 80436458 00000000 d803d100 80e92ec8 80436f44 d803d010 d803d100 1ee0: d83fde00 8043292c d8752710 d803d1f4 d803d010 8042ddfc 8042ddb8 d83f3b00 1f00: d803d1f4 80042b60 00000000 00000003 00000001 00000001 80054598 d83f3b00 1f20: d8004400 d83f3b18 d8004414 d8400000 80e3957b 00000089 d8004400 80043814 1f40: d839ec00 00000000 d83fcd80 d83f3b00 800436e4 00000000 00000000 00000000 1f60: 00000000 80048f34 00000000 00000000 00000000 d83f3b00 00000000 00000000 1f80: d8401f80 d8401f80 00000000 00000000 d8401f90 d8401f90 d8401fac d83fcd80 1fa0: 80048e68 00000000 00000000 8000e538 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<8041f9a0>] (ehci_run) from [<8040fcdc>] (usb_add_hcd+0x248/0x6e8) [<8040fcdc>] (usb_add_hcd) from [<80431494>] (host_start+0x120/0x2e4) [<80431494>] (host_start) from [<80432428>] (ci_otg_start_host+0x54/0xbc) [<80432428>] (ci_otg_start_host) from [<80435eb8>] (otg_set_protocol+0xa4/0xd0) [<80435eb8>] (otg_set_protocol) from [<80436458>] (otg_set_state+0x574/0xc58) [<80436458>] (otg_set_state) from [<80436f44>] (otg_statemachine+0x408/0x46c) [<80436f44>] (otg_statemachine) from [<8043292c>] (ci_otg_fsm_work+0x3c/0x190) [<8043292c>] (ci_otg_fsm_work) from [<8042ddfc>] (ci_otg_work+0x44/0x1c4) [<8042ddfc>] (ci_otg_work) from [<80042b60>] (process_one_work+0xf4/0x35c) [<80042b60>] (process_one_work) from [<80043814>] (worker_thread+0x130/0x3bc) [<80043814>] (worker_thread) from [<80048f34>] (kthread+0xcc/0xe4) [<80048f34>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c) Code: e5953018 e3530000 0a000000 e12fff33 (e5878014) LOG_2: ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: doesn't support gadget Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 In Online 00:00ternal e Offline rror: Oops: 80000005 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-02007-g24b2734-dirty #127 Workque Online 00:00ue: ci_o Offline tg ci_otg_work Online 00:00task: d8 Offline 39ec00 ti: d83ea000 task.ti: d83ea000 PC is at 0x0 LR is at usb_add_hcd+0x248/0x6e8 pc : [<00000000>] lr : [<8040f644>] psr: 60000113 sp : d83ebe60 ip : 00000000 fp : d8004400 r10: 00000001 r9 : 00000001 r8 : d85fd4b0 r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : d85fd400 r3 : 00000000 r2 : d85fd4f4 r1 : 80410178 r0 : d85fd400 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process kworker/u8:2 (pid: 108, stack limit = 0xd83ea238) Stack: (0xd83ebe60 to 0xd83ec000) be60: 00000000 80dd920c d8654e10 d85fd800 d803e010 d85fd400 00000000 00000000 be80: d8004400 00000000 d83ea008 80430e34 80430d14 d803e100 d803e010 d803e1ac bea0: 00000000 80431dc8 80431d74 d803e100 00000001 80435858 80e130bc d803e100 bec0: 00000006 80435df8 00000000 d803e100 80e98ec8 804368e4 d803e010 d803e100 bee0: d86e8100 804322cc d86cf050 d803e1f4 d803e010 8042d79c 8042d758 d83cf900 bf00: d803e1f4 80042b78 00000000 00000003 00000001 00000001 800545e8 d83cf900 bf20: d8004400 d83cf918 d8004414 d83ea000 80e3f57b 00000089 d8004400 8004382c bf40: d839ec00 00000000 d8393780 d83cf900 800436fc 00000000 00000000 00000000 bf60: 00000000 80048f50 80e019f4 00000000 0000264c d83cf900 00000000 00000000 bf80: d83ebf80 d83ebf80 00000000 00000000 d83ebf90 d83ebf90 d83ebfac d8393780 bfa0: 80048e84 00000000 00000000 8000e538 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ee66e85d 133ebd03 [<804 Online 00:000f644>] Offline (usb_add_hcd) from [<80430e34>] (host_start+0x120/0x2e4) [<80430e34>] (host_start) from [<80431dc8>] (ci_otg_start_host+0x54/0xbc) [<80431dc8>] (ci_otg_start_host) from [<80435858>] (otg_set_protocol+0xa4/0xd0) [<80435858>] (otg_set_protocol) from [<80435df8>] (otg_set_state+0x574/0xc58) [<80435df8>] (otg_set_state) from [<804368e4>] (otg_statemachine+0x408/0x46c) [<804368e4>] (otg_statemachine) from [<804322cc>] (ci_otg_fsm_work+0x3c/0x190) [<804322cc>] (ci_otg_fsm_work) from [<8042d79c>] (ci_otg_work+0x44/0x1c4) [<8042d79c>] (ci_otg_work) from [<80042b78>] (process_one_work+0xf4/0x35c) [<80042b78>] (process_one_work) from [<8004382c>] (worker_thread+0x130/0x3bc) [<8004382c>] (worker_thread) from [<80048f50>] (kthread+0xcc/0xe4) [<80048f50>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c) Code: bad PC value Cc: Jun Li <jun.li@freescale.com> Cc: <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-06-09usb: chipidea: add work-around for Marvell HSIC PHY startupRob Herring1-0/+12
The Marvell 28nm HSIC PHY requires the port to be forced to HS mode after the port power is applied. This is done using the test mode in the PORTSC register. As HSIC is always HS, this work-around should be safe to do with all HSIC PHYs and has been tested on i.MX6S. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Peter Chen <Peter.Chen@freescale.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18usb: chipidea: host: turn on vbus before add hcd if early vbus on is requiredLi Jun1-5/+22
If CI_HDRC_TURN_VBUS_EARLY_ON is set, turn on vbus before adding hcd, so it will not set reg_vbus of ehci_ci_priv, then vbus will not be handled by ehci core. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18usb: chipidea: host: add .bus_suspend quirkPeter Chen1-0/+44
For chipidea, its resume sequence is not-EHCI compatible, see below description for FPR at portsc. So in order to send SoF in time for remote wakeup sequence(within 3ms), the RUN/STOP bit must be set before the resume signal is ended, but the usb resume code may run after resume signal is ended, so we had to set it at suspend path. Force Port Resume - RW. Default = 0b. 1= Resume detected/driven on port. 0=No resume (K-state) detected/driven on port. Host mode: Software sets this bit to one to drive resume signaling. The Controller sets this bit to '1' if a J-to-K transition is detected while the port is in the Suspend state. When this bit transitions to a '1' because a J-to-K transition is detected, the Port Change Detect bit in the USBSTS register is also set to '1'. This bit will automatically change to '0' after the resume sequence is complete. This behavior is different from EHCI where the controller driver is required to set this bit to a '0' after the resume duration is timed in the driver. Note that when the controller owns the port, the resume sequence follows the defined sequence documented in the USB Specification Revision 2.0. The resume signaling (Full-speed 'K') is driven on the port as long as this bit remains a '1'. This bit will remain a '1' until the port has switched to idle. Writing a '0' has no affect because the port controller will time the resume operation, clear the bit and the port control state switches to HS or FS idle. This field is '0' if Port Power(PP) is '0' in host mode. This bit is not-EHCI compatible. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18Chipidea: Set connect-at-fullspeed bit when entering host mode if ↵Daniel Tang1-0/+3
CI_HDRC_FORCE_FULLSPEED is set in the platform data PORTSC_PFSC is not set on entering host mode which means the USB OTG controller will attempt to enumerate USB devices at high speed even when the CI_HDRC_FORCE_FULLSPEED flag is set in the platform data. This patch ensures it is set right before host mode operations begin if needed. Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09Revert "usb: chipidea: remove duplicate dev_set_drvdata for host_start"Peter Chen1-0/+1
This reverts commit 14b4099c074f2ddf4d84b22d370170e61b527529 It moved platform_set_drvdata(pdev, ci) before hcd is created, and the hcd will assign itself as ci controller's drvdata during the hcd creation function (in usb_create_shared_hcd), so it overwrites the real ci's drvdata which we want to use. So, if the controller is at host mode, the system suspend API will get the wrong struct ci_hdrc pointer, and cause the oops. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26usb: chipidea: remove duplicate dev_set_drvdata for host_startPeter Chen1-1/+0
The core driver has already done it, besides, move set driver data operation just after ci has allocated successfully in case some code (like ci_role_start) want to access this driver data. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25Merge tag 'usb-for-v3.19' of ↵Greg Kroah-Hartman1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.19 merge window This time, a very pull request with 216 non-merge commits. Most of the commits contained here are sparse or coccinelle fixes ranging from missing 'static' to returning 0 in case of errors. More importantly, we have the removal the now unnecessary 'driver' argument to ->udc_stop(). DWC2 learned about Dual-Role builds. Users of this IP can now have a single driver built for host and device roles. DWC3 got support for two new HW platforms: Exynos7 and AMD. The Broadcom USB 3.0 Device Controller IP is now supported and so is PLX USB338x, which means DWC3 has lost is badge as the only USB 3.0 peripheral IP supported on Linux. Thanks for Tony Lindgren's work, we can now have a distro-like kernel where all MUSB glue layers can be built into the same kernel (statically or dynamically linked) and it'll work in PIO (DMA will come probably on v3.20). Other than these, the usual set of cleanups and non-critical fixes. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: chipidea: host: add portpower overrideMichael Grzeschik1-21/+46
This patch adds an external portpower override callback, only single port regulator control is supported now. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03usb: chipidea: add support to the generic PHY frameworkAntoine Tenart1-1/+4
This patch adds support of the PHY framework for ChipIdea drivers. Changes are done in both the ChipIdea common code and in the drivers accessing the PHY. This is done by adding a new PHY member in ChipIdea's structures and by taking care of it in the code. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: allow to supply the PHY in the drivers when using HCDAntoine Tenart1-3/+4
This patch modify the generic code handling PHYs to allow them to be supplied from the drivers. This adds checks to ensure no PHY was already there when looking for one in the generic code. This also makes sure we do not modify its state in the generic HCD functions, it was provided by the driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-29usb: rename phy to usb_phy in HCDAntoine Tenart1-1/+1
The USB PHY member of the HCD structure is renamed to 'usb_phy' and modifications are done in all drivers accessing it. This is in preparation to adding the generic PHY support. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> [Sergei: added missing 'drivers/usb/misc/lvstest.c' file, resolved rejects, updated changelog.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23usb: chipidea: add TPL support for targeted hostsPeter Chen1-0/+1
For OTG and Embedded hosts, they may need TPL (Targeted Peripheral List) for usb certification and other vender specific requirements, the platform can tell chipidea core driver if it supports tpl through DT or platform data. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: host: init otg port numberLi Jun1-2/+9
Init otg_port number of otg capable host to be 1 at host start. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: host: vbus control change for OTG HNPLi Jun1-3/+7
Leave vbus on/off hanlded by OTG fsm if in OTG mode. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13usb: chipidea: add freescale imx28 special write register methodPeter Chen1-0/+1
According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB register error issue", All USB register write operations must use the ARM SWP instruction. So, we implement special hw_write and hw_test_and_clear for imx28. Discussion for it at below: http://marc.info/?l=linux-usb&m=137996395529294&w=2 This patch is needed for stable tree 3.11+. Cc: stable@vger.kernel.org Cc: robert.hodaszi@digi.com Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-03usb: chipidea: host: Only disable the vbus regulator if it is not NULLFabio Estevam1-1/+2
Commit 40ed51a4b (usb: chipidea: host: add vbus regulator control) introduced a smatch complaint because regulator_disable() is called without checking whether ci->platdata->reg_vbus is not NULL. Fix this by adding the check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: chipidea: host: more enhancement when ci->hcd is NULLPeter Chen1-3/+3
Like http://marc.info/?l=linux-usb&m=138200449428874&w=2 said: two more things are needed to be done: - If host_start fails, the host_stop should not be called, so we add check that ci->hcd is not NULL. - if the host_start fails at the beginning, we need to consider regulator mismatch issue. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16usb/chipidea: fix oops on memory allocation failureRussell King - ARM Linux1-2/+4
When CMA fails to initialize in v3.12-rc4, the chipidea driver oopses the kernel while trying to remove and put the HCD which doesn't exist: WARNING: CPU: 0 PID: 6 at /home/rmk/git/linux-rmk/arch/arm/mm/dma-mapping.c:511 __dma_alloc+0x200/0x240() coherent pool not initialised! Modules linked in: CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56 Workqueue: deferwq deferred_probe_work_func Backtrace: [<c001218c>] (dump_backtrace+0x0/0x10c) from [<c0012328>] (show_stack+0x18/0x1c) r6:c05fd9cc r5:000001ff r4:00000000 r3:df86ad00 [<c0012310>] (show_stack+0x0/0x1c) from [<c05f3a4c>] (dump_stack+0x70/0x8c) [<c05f39dc>] (dump_stack+0x0/0x8c) from [<c00230a8>] (warn_slowpath_common+0x6c/0x8c) r4:df883a60 r3:df86ad00 [<c002303c>] (warn_slowpath_common+0x0/0x8c) from [<c002316c>] (warn_slowpath_fmt+0x38/0x40) r8:ffffffff r7:00001000 r6:c083b808 r5:00000000 r4:df2efe80 [<c0023134>] (warn_slowpath_fmt+0x0/0x40) from [<c00196bc>] (__dma_alloc+0x200/0x240) r3:00000000 r2:c05fda00 [<c00194bc>] (__dma_alloc+0x0/0x240) from [<c001982c>] (arm_dma_alloc+0x88/0xa0) [<c00197a4>] (arm_dma_alloc+0x0/0xa0) from [<c03e2904>] (ehci_setup+0x1f4/0x438) [<c03e2710>] (ehci_setup+0x0/0x438) from [<c03cbd60>] (usb_add_hcd+0x18c/0x664) [<c03cbbd4>] (usb_add_hcd+0x0/0x664) from [<c03e89f4>] (host_start+0xf0/0x180) [<c03e8904>] (host_start+0x0/0x180) from [<c03e7c34>] (ci_hdrc_probe+0x360/0x670 ) r6:df2ef410 r5:00000000 r4:df2c3010 r3:c03e8904 [<c03e78d4>] (ci_hdrc_probe+0x0/0x670) from [<c0311044>] (platform_drv_probe+0x20/0x24) [<c0311024>] (platform_drv_probe+0x0/0x24) from [<c030fcac>] (driver_probe_device+0x9c/0x234) ... ---[ end trace c88ccaf3969e8422 ]--- Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = c0004000 [00000028] *pgd=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56 Workqueue: deferwq deferred_probe_work_func task: df86ad00 ti: df882000 task.ti: df882000 PC is at usb_remove_hcd+0x10/0x150 LR is at host_stop+0x1c/0x3c pc : [<c03cacec>] lr : [<c03e88e4>] psr: 60000013 sp : df883b50 ip : df883b78 fp : df883b74 r10: c11f4c54 r9 : c0836450 r8 : df30c400 r7 : fffffff4 r6 : df2ef410 r5 : 00000000 r4 : df2c3010 r3 : 00000000 r2 : 00000000 r1 : df86b0a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 2f29404a DAC: 00000015 Process kworker/u2:0 (pid: 6, stack limit = 0xdf882240) Stack: (0xdf883b50 to 0xdf884000) ... Backtrace: [<c03cacdc>] (usb_remove_hcd+0x0/0x150) from [<c03e88e4>] (host_stop+0x1c/0x3c) r6:df2ef410 r5:00000000 r4:df2c3010 [<c03e88c8>] (host_stop+0x0/0x3c) from [<c03e8aa0>] (ci_hdrc_host_destroy+0x1c/0x20) r5:00000000 r4:df2c3010 [<c03e8a84>] (ci_hdrc_host_destroy+0x0/0x20) from [<c03e7c80>] (ci_hdrc_probe+0x3ac/0x670) [<c03e78d4>] (ci_hdrc_probe+0x0/0x670) from [<c0311044>] (platform_drv_probe+0x20/0x24) [<c0311024>] (platform_drv_probe+0x0/0x24) from [<c030fcac>] (driver_probe_device+0x9c/0x234) [<c030fc10>] (driver_probe_device+0x0/0x234) from [<c030ff28>] (__device_attach+0x44/0x48) ... ---[ end trace c88ccaf3969e8423 ]--- Fix this so at least we can continue booting and get to a shell prompt. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: add role init and destroy APIsPeter Chen1-0/+7
- The role's init will be called at probe procedure. - The role's destroy will be called at fail patch at probe and driver's removal. - The role's start/stop will be called when specific role has started. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: host: add vbus regulator controlPeter Chen1-1/+22
For boards which have board level vbus control (eg, through gpio), we need to vbus operation according to below rules: - For host, we need open vbus before start hcd, and close it after remove hcd. - For otg, the vbus needs to be on/off when usb role switches. When the host roles begins, it opens vbus; when the host role finishes, it closes vbus. We put vbus operation to host as host is the only vbus user, When we are at host mode, the vbus is on, when we are not at host mode, vbus should be off. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: host: add has_tdi_phy_lpm capability bitTuomas Tynkkynen1-0/+1
The has_hostpc capability bit indicates that the host controller has the HOSTPC register extensions, but at the same time enables clock disabling power saving features with the PHY Low Power Clock Disable (PHCD) bit. However, some host controllers have the HOSTPC extensions but don't support the low-power feature, so the PHCD bit must not be set on those controllers. Add a separate capability bit for the low-power feature instead, and change all existing users of has_hostpc to use this new capability bit. The idea for this commit is taken from an old 2012 commit that never got merged ("disociate chipidea PHY low power suspend control from hostpc") Inspired-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-24usb: chipidea: drop "13xxx" infixAlexander Shishkin1-5/+5
"ci13xxx" is bad for at least the following reasons: * people often mistype it * it doesn't add any informational value to the names it's used in * it needlessly attracts mail filters This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending on the situation. Modules with ci13xxx prefix are also renamed accordingly and aliases are added for compatibility. Otherwise, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11usb: chipidea: Allow disabling streaming not only in udc modeFabio Estevam1-0/+3
When running a scp transfer using a USB/Ethernet adapter the following crash happens: $ scp test.tar.gz fabio@192.168.1.100:/home/fabio fabio@192.168.1.100's password: test.tar.gz 0% 0 0.0KB/s --:-- ETA ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0() NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out Modules linked in: Backtrace: [<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c) r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0 [<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>] (warn_slowpath_common+0x54/0x6c) [<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>] (warn_slowpath_fmt+0x38/0x40) ... Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem. However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode, so allow disabling streaming also in host mode. Tested on a mx6qsabrelite board. Suggested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-11USB: EHCI: miscellaneous cleanups for the library conversionAlan Stern1-6/+1
This patch (as1630) cleans up a few minor items resulting from the split-up of the ehci-hcd driver: Remove the product_desc string from the ehci_driver_overrides structure. All drivers will use the generic "EHCI Host Controller" string. (This was requested by Felipe Balbi.) Allow drivers to pass a NULL pointer to ehci_init_driver() if they don't have to override any settings. Remove a #define symbol that is no longer used from the ChipIdea host driver. Rename overrides to pci_overrides in ehci-pci.c, for consistency with ehci-platform.c. Mark the *_overrides structures as __initdata. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-03USB: EHCI: fix build error in ChipIdea host driverAlan Stern1-0/+1
This patch (as1629) fixes a build error in the ChipIdea host driver when compiled for the ARM architecture. The error was introduced by commit 99f91934a907df31ba878dfdd090002049dc476a (USB: EHCI: make ehci-platform a separate driver). The fix is simple; an additional header-file #include is needed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-02USB: EHCI: fix build error by making ChipIdea host a normal EHCI driverAlan Stern1-44/+7
This patch (as1627) splits the ehci-hcd core code, which has become a separate library module, out from the ChipIdea host driver. Instead of #include-ing ehci-hcd.c directly, the ChipIdea module will now use the ehci-hcd library in a normal fashion. This fixes a build error caused by commit 3e0232039967d7a1a06c013d097458b4d5892af1 (USB: EHCI: prepare to make ehci-hcd a library module); I had forgotten about the unorthodox way the ChipIdea driver uses the ehci-hcd code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31USB: EHCI: remove ehci_port_power() routineAlan Stern1-17/+1
This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-09usb: chipidea: permit driver bindings pass phy pointerRichard Zhao1-0/+1
Sometimes, the driver bindings may know what phy they use. For example, when using device tree, the usb controller may have a phandler pointing to usb phy. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 02:59:00 +0000