summaryrefslogtreecommitdiffstats
path: root/drivers/usb/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2019-09-02Merge tag 'usb-for-v5.4' of ↵Greg Kroah-Hartman1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: Changes for v5.4 merge window With only 45 non-merge commits, we have a small merge window from the Gadget perspective. The biggest change here is the addition of the Cadence USB3 DRD Driver. All other changes are small, non-critical fixes or smaller new features like the improvement to BESL handling in dwc3. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> * tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits) usb: gadget: net2280: Add workaround for AB chip Errata 11 usb: gadget: net2280: Move all "ll" registers in one structure usb: dwc3: gadget: Workaround Mirosoft's BESL check usb:cdns3 Fix for stuck packets in on-chip OUT buffer. usb: cdns3: Add Cadence USB3 DRD Driver usb: common: Simplify usb_decode_get_set_descriptor function. usb: common: Patch simplify usb_decode_set_clear_feature function. usb: common: Separated decoding functions from dwc3 driver. dt-bindings: add binding for USBSS-DRD controller. usb: gadget: composite: Set recommended BESL values usb: dwc3: gadget: Set BESL config parameter usb: dwc3: Separate field holding multiple properties usb: gadget: Export recommended BESL values usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant usb: udc: lpc32xx: silence fall-through warning usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables usb: udc: lpc32xx: remove set but not used 3 variables usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails usb: dwc3: st: Add of_dev_put() in probe function usb: dwc3: st: Add of_node_put() before return in probe function ...
2019-08-29usb: cdns3: Add Cadence USB3 DRD DriverPawel Laszczak1-0/+2
This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-08USB: Move wusbcore and UWB to staging as it is obsoleteGreg Kroah-Hartman1-2/+0
The UWB and wusbcore code is long obsolete, so let us just move the code out of the real part of the kernel and into the drivers/staging/ location with plans to remove it entirely in a few releases. Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-04Revert "usb:cdns3 Add Cadence USB3 DRD Driver"Greg Kroah-Hartman1-2/+0
This reverts commit 8bc1901ca7b07d864fca11461b3875b31f949765. It's broken. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Felipe Balbi <balbi@kernel.org> Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03usb:cdns3 Add Cadence USB3 DRD DriverPawel Laszczak1-0/+2
This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-06USB: move usb debugfs directory creation to the usb common coreGreg Kroah-Hartman1-2/+1
The USB gadget subsystem wants to use the USB debugfs root directory, so move it to the common "core" USB code so that it is properly initialized and removed as needed. In order to properly do this, we need to load the common code before the usb core code, when everything is linked into the kernel, so reorder the link order of the code. Also as the usb common code has the possibility of the led trigger logic to be merged into it, handle the build option properly by only having one module init/exit function and have the common code initialize the led trigger if needed. Reported-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22usb: roles: Add Intel xHCI USB role switch driverHans de Goede1-0/+2
Various Intel SoCs (Cherry Trail, Broxton and others) have an internal USB role switch for swiching the OTG USB data lines between the xHCI host controller and the dwc3 gadget controller. Note on some Cherry Trail systems there is ACPI/AML code listening to edge interrupts on the id-pin (through an _AIE ACPI method) and switching the role between ROLE_HOST and ROLE_NONE based on the id-pin. Note it does not set the role to ROLE_DEVICE, because device-mode is usually not used under Windows. The presence of AML code which modifies the cfg0 reg (on some systems) means that our read/write/modify of cfg0 may race with the AML code doing the same to avoid this we take the global ACPI lock while doing the read/write/modify. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-04Merge tag 'usb-4.12-rc1' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.12-rc1. Lots of good stuff here, after many many many attempts, the kernel finally has a working typeC interface, many thanks to Heikki and Guenter and others who have taken the time to get this merged. It wasn't an easy path for them at all. There's also a staging driver that uses this new api, which is why it's coming in through this tree. Along with that, there's the usual huge number of changes for gadget drivers, xhci, and other stuff. Johan also finally refactored pretty much every driver that was looking at USB endpoints to do it in a common way, which will help prevent any "badly-formed" devices from causing problems in drivers. That too wasn't a simple task. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) staging: typec: Fairchild FUSB302 Type-c chip driver staging: typec: Type-C Port Controller Interface driver (tcpci) staging: typec: USB Type-C Port Manager (tcpm) usb: host: xhci: remove #ifdef around PM functions usb: musb: don't mark of_dev_auxdata as initdata usb: misc: legousbtower: Fix buffers on stack USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" usb: Make sure usb/phy/of gets built-in USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h usb: host: xhci: print correct command ring address usb: host: xhci: delete sp_dma_buffers for scratchpad usb: host: xhci: using correct specification chapter reference for DCBAAP xhci: switch to pci_alloc_irq_vectors usb: host: xhci-plat: set resume_quirk() for R-Car controllers usb: host: xhci-plat: add resume_quirk() usb: host: xhci-plat: enable clk in resume timing usb: host: plat: Enable xHCI plat runtime PM USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit USB: serial: constify static arrays usb: fix some references for /proc/bus/usb ...
2017-03-23usb: USB Type-C connector classHeikki Krogerus1-0/+2
The purpose of USB Type-C connector class is to provide unified interface for the user space to get the status and basic information about USB Type-C connectors on a system, control over data role swapping, and when the port supports USB Power Delivery, also control over power role swapping and Alternate Modes. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-and-Tested-by: Felipe Balbi <felipe.balbi@linux.intel.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-21usb/early: Add driver for xhci debug capabilityLu Baolu1-1/+1
XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-17usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HWyuan linyu1-1/+1
a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: Add MediaTek USB3 DRD driverChunfeng Yun1-0/+1
This patch adds support for the MediaTek USB3 controller integrated into MT8173. It currently supports High-Speed Peripheral Only mode. Super-Speed Peripheral, Dual-Role Device and Host Only (xHCI) modes will be added in the next patchs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbolArnd Bergmann1-1/+1
The USB_FSL_MPH_DR_OF symbol is used to ensure the code that interprets the DR device node is built whenever one of the two drivers (EHCI or UDC) for the platform is enabled. However, if CONFIG_USB is disabled and we only support gadget mode, this causes a Kconfig warning: warning: (USB_FSL_USB2) selects USB_FSL_MPH_DR_OF which has unmet direct dependencies (USB_SUPPORT && USB) We can avoid this warning by simply no longer using the symbol, and making sure we enter the drivers/usb/host/ directory when the UDC driver is enabled that needs the file, and then we use Makefile syntax to ensure the file is built-in if needed. There is currently a dependency on CONFIG_OF, but this is redundant, as we already know that this is set unconditionally for the platforms that use this driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2015-10-16usb-host: Remove fusbh200 driverPeter Senna Tschudin1-1/+0
fusbh200 and fotg210 are very similar. The initial idea was to consolidate both drivers but I'm afraid fusbh200 is not being used. This patch remove the fusbh200 source code, update Kconfig and two Makefiles. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: John Chiang <john453@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18usb: load usb phy earlierZhangfei Gao1-1/+1
USB PHY works proper is the base for the coming USB controller operation. With this patch, it can avoid the controller drivers which are linked earlier than USB PHY always being probed deferral. Look at drivers/Makefile, it links phy first with the similar method. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/Laurent Pinchart1-1/+1
Now that this is DRD, it doesn't make sense to keep it under drivers/usb/host. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-25usbip: move usbip kernel code out of stagingValentina Manea1-0/+2
At this point, USB/IP kernel code is fully functional and can be moved out of staging. Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: move usb/usb-common.c to usb/common/usb-common.cPeter Chen1-1/+1
Since we will have more usb-common things, and it will let usb-common.c be larger and larger, we create a folder named usb/common for all usb common things. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27Add support for using a MAX3421E chip as a host driver.David Mosberger1-0/+1
Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13Move DWC2 driver out of stagingPaul Zimmerman1-0/+1
The DWC2 driver should now be in good enough shape to move out of staging. I have stress tested it overnight on RPI running mass storage and Ethernet transfers in parallel, and for several days on our proprietary PCI-based platform. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-13Merge tag 'usb-for-v3.12' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.12 merge window All patches here have been pending on linux-usb and sitting in linux-next for a while now. The biggest things in this tag are: DWC3 learned proper usage of threaded IRQ handlers and now we spend very little time in hardirq context. MUSB now has proper support for BeagleBone and Beaglebone Black. Tegra's USB support also got quite a bit of love and is learning to use PHY layer and generic DT attributes. Other than that, the usual pack of cleanups and non-critical fixes follow. Signed-of-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/gadget/udc-core.c drivers/usb/host/ehci-tegra.c drivers/usb/musb/omap2430.c drivers/usb/musb/tusb6010.c
2013-07-29usb: host: Faraday fotg210-hcd driverFeng-Hsin Chiang1-0/+1
FOTG210 is an OTG controller which can be configured as an USB2.0 host. FOTG210 host is an ehci-like controller with some differences. First, register layout of FOTG210 is incompatible with EHCI. Furthermore, FOTG210 is lack of siTDs which means iTDs are used for both HS and FS ISO transfer. Signed-off-by: Feng-Hsin Chiang <john453@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29usb: phy: make PHY driver selection possible by controller driversRoger Quadros1-1/+1
Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-24Revert "usb: host: Faraday fotg210-hcd driver"Greg Kroah-Hartman1-1/+0
This reverts commit 1dd3d123239179fad5de5dc00a6e0014a1918fde. The email address for the developer now bounces, which means they have moved on, so remove the driver until someone else from the company steps up to maintain it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24usb: host: Faraday fotg210-hcd driverYuan-Hsin Chen1-0/+1
FOTG210 is an OTG controller which can be configured as an USB2.0 host. FOTG210 host is an ehci-like controller with some differences. First, register layout of FOTG210 is incompatible with EHCI. Furthermore, FOTG210 is lack of siTDs which means iTDs are used for both HS and FS ISO transfer. Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17usb host: Faraday USB2.0 FUSBH200-HCD driverYuan-Hsin Chen1-0/+1
FUSBH200-HCD is an USB2.0 hcd for Faraday FUSBH200. FUSBH200 is an ehci-like controller with some differences. First, register layout of FUSBH200 is incompatible with EHCI. Furthermore, FUSBH200 is lack of siTDs which means iTDs are used for both HS and FS ISO transfer. Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-18usb: phy: remove CONFIG_USB_OTG_UTILSFelipe Balbi1-1/+1
there are no more users of CONFIG_USB_OTG_UTILS left in tree, we can remove it just fine. [ kishon@ti.com : fixed a linking error due to original patch forgetting to change drivers/usb/Makefile ] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: phy: move all PHY drivers to drivers/usb/phy/Felipe Balbi1-2/+0
that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-07usb: Makefile: fix drivers/usb/phy/ Makefile entryFelipe Balbi1-1/+1
drivers/usb/phy/ should be compiled everytime we have CONFIG_USB_OTG_UTILS enabled. phy/ should've been part of the build process based on CONFIG_USB_OTG_UTILS, don't know where I had my head when I allowed CONFIG_USB_COMMON there. In fact commit c6156328dec52a55f90688cbfad21c83f8711d84 tried to fix a previous issue but it made things even worse. The real solution is to compile phy/ based on CONFIG_USB_OTG_UTILS which gets selected by all PHY drivers. I only triggered the error recently after accepting a patch which moved a bunch of code from otg/otg.c to phy/phy.c and running 100 randconfig cycles. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26usb: phy: Fix Kconfig dependency for Phy driversAlexandre Pereira da Silva1-1/+1
USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: move ci13xxx and related code to drivers/usb/chipideaAlexander Shishkin1-0/+1
Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: Add driver for NXP ISP1301 USB transceiverRoland Stigge1-0/+1
This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-11-26USB: OTG should be linked before HostNeil Zhang1-1/+2
For OTG controller, the host driver will call function otg_get_transceiver to get the otg transceiver, so we need to init the OTG driver before HOST. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-18usb: Provide usb_speed_string() functionMichal Nazarewicz1-0/+2
In a few places in the kernel, the code prints a human-readable USB device speed (eg. "high speed"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To mitigate this issue, this commit introduces usb_speed_string() function, which returns a human-readable name of provided speed. It also changes a few places switch was used to use this new function. This changes a bit the way the speed is printed in few instances at the same time standardising it. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22usb: Introduce DesignWare USB3 DRD DriverFelipe Balbi1-0/+2
The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-02USB: fix build of FSL MPH DR OF platform driverAnatolij Gustschin1-0/+1
When only FSL USB gadget driver is selected in the kernel configuration the MPH DR OF driver for creation of FSL USB platform devices from device tree won't be built. As a result no USB platform devices for MPH DR USB controller will be created at run time and no probing will be done in the fsl_udc_core driver. Add an entry to the Makefile to build the MPH DR OF platform driver if CONFIG_USB_FSL_MPH_DR_OF is defined. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: don't enter usb subdirectories directlyFelipe Balbi1-0/+5
Instead, make we enter usb/ directory on all needed cases and enter the subdirectories from drivers/usb/Makefile. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: drivers/usb/Makefile: conditionally descend to 'early'Nicolas Kaiser1-1/+1
Don't descend to the EARLY_PRINTK_DBGP directory unless it is actually used. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: MXC: Add i.MX21 specific USB host controller driver.Martin Fuzzey1-0/+1
This driver is a Full / Low speed only USB host for the i.MX21. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: Fix double-linking of drivers/usb/otg when ULPI is selectedBill Gatliff1-2/+0
This patch corrects a problem where drivers/usb/otg is linked twice if CONFIG_USB_ULPI is selected, resulting in a build error (symbol conflict). The files in that directory are properly linked already as part of CONFIG_USB, and need not be indicated specifically for CONFIG_USB_ULPI. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB OTG: Add generic driver for ULPI OTG transceiverDaniel Mack1-0/+2
This adds a minimal generic driver for ULPI connected transceivers, using the OTG framework functions recently introduced. The driver got a table to match the ULPI chips, which currently only has one entry for NXP's ISP 1504 transceiver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: ehci,dbgp,early_printk: split ehci debug driver from early_printk.cJason Wessel1-0/+1
Move the dbgp early printk driver in advance of refactoring and adding new code, so the changes to this code are tracked separately from the move of the code. The drivers/usb/early directory will be the location of the current and future early usb code for driving usb devices prior initializing the standard interrupt driven USB drivers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: NXP ISP1362 USB host driverLothar Wassmann1-0/+1
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries.Sarah Sharp1-0/+1
Add Makefile and Kconfig entries for the xHCI host controller driver. List Sarah Sharp as the maintainer for the xHCI driver. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28Revert "USB: Correct Makefile to make isp1760 buildable"Mike Frysinger1-1/+0
This reverts commit 26e1287594864169577327fef233befc9739be3b. A larger patch (f7e7aa585) a few days after this one added the same line to the Makefile, but in a different place. While it'd be more correct to revert that one, it's easier to revert this one because this is a one-liner. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work.Andy Lutomirski1-0/+2
If CONFIG_USB_ACM and CONFIG_USB_PRINTER are not set, then cdc-wdm and usbtmc won't get built. Signed-off-by: Andy Lutomirski <amluto@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: Add platform device support for the ISP1760 USB chipCatalin Marinas1-0/+1
Currently, the driver only supports PCI and PPC_OF but there are boards like ARM RealView where this is a platform device. The patch adds the necessary functions and registration to the isp1760-if.c file and modifies the corresponding Makefile and Kconfig to be able to use this driver even if PCI and PPC_OF are not enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: Correct Makefile to make isp1760 buildableIvan Kuten1-0/+1
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: Driver for Freescale QUICC Engine USB Host ControllerAnton Vorontsov1-0/+1
This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>