summaryrefslogtreecommitdiffstats
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2019-05-24vt/fbcon: deinitialize resources in visual_init() after failed memory allocationGrzegorz Halat1-2/+9
After memory allocation failure vc_allocate() doesn't clean up data which has been initialized in visual_init(). In case of fbcon this leads to divide-by-0 in fbcon_init() on next open of the same tty. memory allocation in vc_allocate() may fail here: 1097: vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); on next open() fbcon_init() skips vc_font.data initialization: 1088: if (!p->fontdata) { division by zero in fbcon_init() happens here: 1149: new_cols /= vc->vc_font.width; Additional check is needed in fbcon_deinit() to prevent usage of uninitialized vc_screenbuf: 1251: if (vc->vc_hi_font_mask && vc->vc_screenbuf) 1252: set_vc_hi_font(vc, false); Crash: #6 [ffffc90001eafa60] divide_error at ffffffff81a00be4 [exception RIP: fbcon_init+463] RIP: ffffffff814b860f RSP: ffffc90001eafb18 RFLAGS: 00010246 ... #7 [ffffc90001eafb60] visual_init at ffffffff8154c36e #8 [ffffc90001eafb80] vc_allocate at ffffffff8154f53c #9 [ffffc90001eafbc8] con_install at ffffffff8154f624 ... Signed-off-by: Grzegorz Halat <ghalat@redhat.com> Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21tty: max310x: Fix external crystal register setupJoe Burmeister1-1/+1
The datasheet states: Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking (crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable clocking Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal oscillator. When using an external clock source at XIN, CrystalEn must be set low. The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not. This was required to make the MAX3107 with an external crystal on our board able to send or receive data. Signed-off-by: Joe Burmeister <joe.burmeister@devtank.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21serial: sh-sci: disable DMA for uart_consoleGeorge G. Davis1-0/+7
As noted in commit 84b40e3b57ee ("serial: 8250: omap: Disable DMA for console UART"), UART console lines use low-level PIO only access functions which will conflict with use of the line when DMA is enabled, e.g. when the console line is also used for systemd messages. So disable DMA support for UART console lines. Reported-by: Michael Rodin <mrodin@de.adit-jv.com> Link: https://patchwork.kernel.org/patch/10929511/ Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21serial: imx: remove log spamming error messageSascha Hauer1-1/+0
Each time the DMA engine signals a transaction error the driver prints a message at error level. Getting transaction errors is pretty much expected on baudrate mismatches and the correspoding error counters are increased in this case properly. Remove the error message which is possibly repeated at a very high rate which can lock up the whole system. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21tty: serial: msm_serial: Fix XON/XOFFJorge Ramirez-Ortiz1-1/+4
When the tty layer requests the uart to throttle, the current code executing in msm_serial will trigger "Bad mode in Error Handler" and generate an invalid stack frame in pstore before rebooting (that is if pstore is indeed configured: otherwise the user shall just notice a reboot with no further information dumped to the console). This patch replaces the PIO byte accessor with the word accessor already used in PIO mode. Fixes: 68252424a7c7 ("tty: serial: msm: Support big-endian CPUs") Cc: stable@vger.kernel.org Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19Merge tag 'riscv-for-linus-5.2-mw2' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains an assortment of RISC-V related patches that I'd like to target for the 5.2 merge window. Most of the patches are cleanups, but there are a handful of user-visible changes: - The nosmp and nr_cpus command-line arguments are now supported, which work like normal. - The SBI console no longer installs itself as a preferred console, we rely on standard mechanisms (/chosen, command-line, hueristics) instead. - sfence_remove_sfence_vma{,_asid} now pass their arguments along to the SBI call. - Modules now support BUG(). - A missing sfence.vma during boot has been added. This bug only manifests during boot. - The arch/riscv support for SiFive's L2 cache controller has been merged, which should un-block the EDAC framework work. I've only tested this on QEMU again, as I didn't have time to get things running on the Unleashed. The latest master from this morning merges in cleanly and passes the tests as well" * tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits) riscv: fix locking violation in page fault handler RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs RISC-V: Add DT documentation for SiFive L2 Cache Controller RISC-V: Avoid using invalid intermediate translations riscv: Support BUG() in kernel module riscv: Add the support for c.ebreak check in is_valid_bugaddr() riscv: support trap-based WARN() riscv: fix sbi_remote_sfence_vma{,_asid}. riscv: move switch_mm to its own file riscv: move flush_icache_{all,mm} to cacheflush.c tty: Don't force RISCV SBI console as preferred console RISC-V: Access CSRs using CSR numbers RISC-V: Add interrupt related SCAUSE defines in asm/csr.h RISC-V: Use tabs to align macro values in asm/csr.h RISC-V: Fix minor checkpatch issues. RISC-V: Support nr_cpus command line option. RISC-V: Implement nosmp commandline option. RISC-V: Add RISC-V specific arch_match_cpu_phys_id riscv: vdso: drop unnecessary cc-ldoption riscv: call pm_power_off from machine_halt / machine_power_off ...
2019-05-16tty: Don't force RISCV SBI console as preferred consoleAnup Patel1-1/+0
The Linux kernel will auto-disables all boot consoles whenever it gets a preferred real console. Currently on RISC-V systems, if we have a real console which is not RISCV SBI console then boot consoles (such as earlycon=sbi) are not auto-disabled when a real console (ttyS0 or ttySIF0) is available. This results in duplicate prints at boot-time after kernel starts using real console (i.e. ttyS0 or ttySIF0) if "earlycon=" kernel parameter was passed by bootloader. The reason for above issue is that RISCV SBI console always adds itself as preferred console which is causing other real consoles to be not used as preferred console. Ideally "console=" kernel parameter passed by bootloaders should be the one selecting a preferred real console. This patch fixes above issue by not forcing RISCV SBI console as preferred console. Fixes: afa6b1ccfad5 ("tty: New RISC-V SBI console driver") Cc: stable@vger.kernel.org Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-14panic: avoid the extra noise dmesgFeng Tang1-0/+6
When kernel panic happens, it will first print the panic call stack, then the ending msg like: [ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception [ 35.749975] ------------[ cut here ]------------ The above message are very useful for debugging. But if system is configured to not reboot on panic, say the "panic_timeout" parameter equals 0, it will likely print out many noisy message like WARN() call stack for each and every CPU except the panic one, messages like below: WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190 Call Trace: <IRQ> try_to_wake_up default_wake_function autoremove_wake_function __wake_up_common __wake_up_common_lock __wake_up wake_up_klogd_work_func irq_work_run_list irq_work_tick update_process_times tick_sched_timer __hrtimer_run_queues hrtimer_interrupt smp_apic_timer_interrupt apic_timer_interrupt For people working in console mode, the screen will first show the panic call stack, but immediately overridden by these noisy extra messages, which makes debugging much more difficult, as the original context gets lost on screen. Also these noisy messages will confuse some users, as I have seen many bug reporters posted the noisy message into bugzilla, instead of the real panic call stack and context. Adding a flag "suppress_printk" which gets set in panic() to avoid those noisy messages, without changing current kernel behavior that both panic blinking and sysrq magic key can work as is, suggested by Petr Mladek. To verify this, make sure kernel is not configured to reboot on panic and in console # echo c > /proc/sysrq-trigger to see if console only prints out the panic call stack. Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-09Merge tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-2/+2
Pull dmaengine updates from Vinod Koul: - Updates to stm32 dma residue calculations - Interleave dma capability to axi-dmac and support for ZynqMP arch - Rework of channel assignment for rcar dma - Debugfs for pl330 driver - Support for Tegra186/Tegra194, refactoring for new chips and support for pause/resume - Updates to axi-dmac, bcm2835, fsl-edma, idma64, imx-sdma, rcar-dmac, stm32-dma etc - dev_get_drvdata() updates on few drivers * tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (34 commits) dmaengine: tegra210-adma: restore channel status dmaengine: tegra210-dma: free dma controller in remove() dmaengine: tegra210-adma: add pause/resume support dmaengine: tegra210-adma: add support for Tegra186/Tegra194 Documentation: DT: Add compatibility binding for Tegra186 dmaengine: tegra210-adma: prepare for supporting newer Tegra chips dmaengine: at_xdmac: remove a stray bottom half unlock dmaengine: fsl-edma: Adjust indentation dmaengine: fsl-edma: Fix typo in Vybrid name dmaengine: stm32-dma: fix residue calculation in stm32-dma dmaengine: nbpfaxi: Use dev_get_drvdata() dmaengine: bcm-sba-raid: Use dev_get_drvdata() dmaengine: stm32-dma: Fix unsigned variable compared with zero dmaengine: stm32-dma: use platform_get_irq() dmaengine: rcar-dmac: Update copyright information dmaengine: imx-sdma: Only check ratio on parts that support 1:1 dmaengine: xgene-dma: fix spelling mistake "descripto" -> "descriptor" dmaengine: idma64: Move driver name to the header dmaengine: bcm2835: Drop duplicate capability setting. dmaengine: pl330: _stop: clear interrupt status ...
2019-05-08Merge tag 'tty-5.2-rc1' of ↵Linus Torvalds41-119/+2604
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.2-rc1. It's really pretty small, not much happening in this portion of the kernel at the moment. When the "highlight" is the movement of the documentation from .txt to .rst files, it's a good merge window. There's a number of small fixes and updates over the various serial drivers, and a new "tty null" driver for those embedded systems that like to make things even smaller and not break things. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (45 commits) tty: serial: add driver for the SiFive UART dt-bindings: serial: add documentation for the SiFive UART driver serial: uartps: Add support for cts-override dt-bindings: xilinx-uartps: Add support for cts-override serial: milbeaut_usio: Fix error handling in probe and remove tty: rocket: deprecate the rp_ioctl tty: rocket: Remove RCPK_GET_STRUCT ioctl tty: update obsolete termios comment tty: serial_core: fix error code returned by uart_register_driver() serial: 8250-mtk: modify baudrate setting serial: 8250-mtk: add follow control docs: serial: convert docs to ReST and rename to *.rst serial: 8250_exar: Adjust IOT2000 matching TTY: serial_core, add ->install serial: Fix using plain integer instead of Null pointer tty:serial_core: Spelling mistake tty: Add NULL TTY driver tty: vt: keyboard: Allow Unicode compose base char Revert "tty: fix NULL pointer issue when tty_port ops is not set" serial: Add Milbeaut serial control ...
2019-05-07Merge tag 'staging-5.2-rc1' of ↵Linus Torvalds2-19/+34
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the big staging and iio driver update for 5.2-rc1. Lots of tiny fixes all over the staging and IIO driver trees here, along with some new IIO drivers. The "counter" subsystem was added in here as well, as it is needed by the IIO drivers and subsystem. Also we ended up deleting two drivers, making this pull request remove a few hundred thousand lines of code, always a nice thing to see. Both of the drivers removed have been replaced with "real" drivers in their various subsystem directories, and they will be coming to you from those locations during this merge window. There are some core vt/selection changes in here, that was due to some cleanups needed for the speakup fixes. Those have all been acked by the various subsystem maintainers (i.e. me), so those are ok. We also added a few new drivers, for some odd hardware, giving new developers plenty to work on with basic coding style cleanups to come in the near future. Other than that, nothing unusual here. All of these have been in linux-next for a while with no reported issues, other than an odd gcc warning for one of the new drivers that should be fixed up soon" [ I fixed up the warning myself - Linus ] * tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits) staging: kpc2000: kpc_spi: Fix build error for {read,write}q Staging: rtl8192e: Remove extra space before break statement Staging: rtl8192u: ieee80211: Fix if-else indentation warning Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces staging: most: cdev: fix chrdev_region leak in mod_exit staging: wlan-ng: Fix improper SPDX comment style staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch staging: vc04_services: bcm2835-camera: Compress two lines into one line staging: rtl8723bs: core: Use !x in place of NULL comparison. staging: rtl8723bs: core: Prefer using the BIT Macro. staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling staging: kpc2000: fix up build problems with readq() staging: rtlwifi: move remaining phydm .h files staging: rtlwifi: strip down phydm .h files staging: rtlwifi: delete the staging driver staging: fieldbus: anybus-s: rename bus id field to avoid confusion staging: fieldbus: anybus-s: keep device bus id in bus endianness Staging: sm750fb: Change *array into *const array staging: rtl8192u: ieee80211: Fix spelling mistake staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro ...
2019-05-06Merge tag 'arm64-mmiowb' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull mmiowb removal from Will Deacon: "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb()) Remove mmiowb() from the kernel memory barrier API and instead, for architectures that need it, hide the barrier inside spin_unlock() when MMIO has been performed inside the critical section. The only relatively recent changes have been addressing review comments on the documentation, which is in a much better shape thanks to the efforts of Ben and Ingo. I was initially planning to split this into two pull requests so that you could run the coccinelle script yourself, however it's been plain sailing in linux-next so I've just included the whole lot here to keep things simple" * tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits) docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section arch: Remove dummy mmiowb() definitions from arch code net/ethernet/silan/sc92031: Remove stale comment about mmiowb() i40iw: Redefine i40iw_mmiowb() to do nothing scsi/qla1280: Remove stale comment about mmiowb() drivers: Remove explicit invocations of mmiowb() drivers: Remove useless trailing comments from mmiowb() invocations Documentation: Kill all references to mmiowb() riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() m68k/io: Remove useless definition of mmiowb() nds32/io: Remove useless definition of mmiowb() x86/io: Remove useless definition of mmiowb() arm64/io: Remove useless definition of mmiowb() ARM/io: Remove useless definition of mmiowb() mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors ...
2019-05-06tty: rocket: fix incorrect forward declaration of 'rp_init()'Linus Torvalds1-1/+1
Make the forward declaration actually match the real function definition, something that previous versions of gcc had just ignored. This is another patch to fix new warnings from gcc-9 before I start the merge window pulls. I don't want to miss legitimate new warnings just because my system update brought a new compiler with new warnings. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-29tty: serial: add driver for the SiFive UARTPaul Walmsley3-0/+1081
Add a serial driver for the SiFive UART, found on SiFive FU540 devices (among others). The underlying serial IP block is relatively basic, and currently does not support serial break detection. Further information on the IP block can be found in the documentation and Chisel sources: https://static.dev.sifive.com/FU540-C000-v1.0.pdf https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart This driver was written in collaboration with Wesley Terpstra <wesley@sifive.com>. Tested on a SiFive HiFive Unleashed A00 board, using BBL and the open- source FSBL (using a DT file based on what's targeted for mainline). This revision incorporates changes based on comments by Julia Lawall <julia.lawall@lip6.fr>, Emil Renner Berthing <kernel@esmil.dk>, and Andreas Schwab <schwab@suse.de>. Thanks also to Andreas for testing the driver with his userspace and reporting a bug with the set_termios implementation. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Wesley Terpstra <wesley@sifive.com> Cc: linux-serial@vger.kernel.org Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Andreas Schwab <schwab@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29serial: uartps: Add support for cts-overrideShubhrajyoti Datta1-0/+12
Having flow is configurable. Add support for the same by checking for cts-override. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29serial: milbeaut_usio: Fix error handling in probe and removeWei Yongjun1-8/+1
devm_clk_get() is used so there is no reason to explicitly call clk_put() in probe or remove functions. Also remove duplicate assign for port->membase. Fixes: ba44dc043004 ("serial: Add Milbeaut serial control") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Tested-by: Sugaya Taichi <sugaya.taichi@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25tty: rocket: deprecate the rp_ioctlFuqian Huang1-0/+10
The rp_ioctl is deprecated. Add dev_warn_ratelimited to warn the use of rp_ioctl. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25tty: rocket: Remove RCPK_GET_STRUCT ioctlFuqian Huang2-5/+0
If the cmd is RCPK_GET_STRUCT, copy_to_user will copy info to user space. As info->port.ops is the address of a constant object rocket_port_ops (assigned in init_r_port), a kernel address leakage happens. Remove the RCPK_GET_STRUCT ioctl. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25tty: update obsolete termios commentJohan Hovold1-1/+1
Update an obsolete comment referring to the termios_locked structure which was removed over a decade ago by commit fe6e29fdb1a7 ("tty: simplify ktermios allocation"). While at it, fix the "Thus" typo. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25tty: serial_core: fix error code returned by uart_register_driver()Sergey Organov1-2/+2
uart_register_driver() returned -ENOMEM on any error, even when tty_register_driver() call returned another one, such as -EBUSY. Signed-off-by: Sergey Organov <sorganov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25serial: 8250-mtk: modify baudrate settingLong Cheng1-0/+102
In termios function, add Fractional divider to adjust baudrate. Signed-off-by: Long Cheng <long.cheng@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25serial: 8250-mtk: add follow controlLong Cheng1-23/+37
Add SW and HW follow control function. Signed-off-by: Long Cheng <long.cheng@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25docs: serial: convert docs to ReST and rename to *.rstMauro Carvalho Chehab2-3/+3
The converted files are focused at the Kernel internal API, so, this is a good candidate for the kernel API set of books. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25serial: 8250_exar: Adjust IOT2000 matchingSu Bao Cheng1-2/+5
Since there are more IOT2040 variants with identical hardware but different asset tags, the asset tag matching should be adjusted to support them. As only the IOT2040 variants have the Exar chip on board, matching on their board name is enough. In the future there will be no other devices with the "SIMATIC IOT2000" DMI board name but different hardware. Signed-off-by: Su Bao Cheng <baocheng.su@siemens.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25TTY: serial_core, add ->installJiri Slaby1-11/+13
We need to compute the uart state only on the first open. This is usually what is done in the ->install hook. serial_core used to do this in ->open on every open. So move it to ->install. As a side effect, it ensures the state is set properly in the window after tty_init_dev is called, but before uart_open. This fixes a bunch of races between tty_open and flush_to_ldisc we were dealing with recently. One of such bugs was attempted to fix in commit fedb5760648a (serial: fix race between flush_to_ldisc and tty_open), but it only took care of a couple of functions (uart_start and uart_unthrottle). I was able to reproduce the crash on a SLE system, but in uart_write_room which is also called from flush_to_ldisc via process_echoes. I was *unable* to reproduce the bug locally. It is due to having this patch in my queue since 2012! general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 5 Comm: kworker/u4:0 Tainted: G L 4.12.14-396-default #1 SLE15-SP1 (unreleased) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound flush_to_ldisc task: ffff8800427d8040 task.stack: ffff8800427f0000 RIP: 0010:uart_write_room+0xc4/0x590 RSP: 0018:ffff8800427f7088 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000002f RSI: 00000000000000ee RDI: ffff88003888bd90 RBP: ffffffffb9545850 R08: 0000000000000001 R09: 0000000000000400 R10: ffff8800427d825c R11: 000000000000006e R12: 1ffff100084fee12 R13: ffffc900004c5000 R14: ffff88003888bb28 R15: 0000000000000178 FS: 0000000000000000(0000) GS:ffff880043300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561da0794148 CR3: 000000000ebf4000 CR4: 00000000000006e0 Call Trace: tty_write_room+0x6d/0xc0 __process_echoes+0x55/0x870 n_tty_receive_buf_common+0x105e/0x26d0 tty_ldisc_receive_buf+0xb7/0x1c0 tty_port_default_receive_buf+0x107/0x180 flush_to_ldisc+0x35d/0x5c0 ... 0 in rbx means tty->driver_data is NULL in uart_write_room. 0x178 is tried to be dereferenced (0x178 >> 3 is 0x2f in rdx) at uart_write_room+0xc4. 0x178 is exactly (struct uart_state *)NULL->refcount used in uart_port_lock from uart_write_room. So revert the upstream commit here as my local patch should fix the whole family. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Li RongQing <lirongqing@baidu.com> Cc: Wang Li <wangli39@baidu.com> Cc: Zhang Yu <zhangyu31@baidu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25serial: Fix using plain integer instead of Null pointerSugaya Taichi1-1/+1
Fix build warning that using plain integer as Null pointer. This is reported by kbuild test robot. Fixes: ba44dc043004 ("serial: Add Milbeaut serial control") Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-21Merge 5.1-rc6 into tty-nextGreg Kroah-Hartman3-4/+9
We want the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-21Merge 5.1-rc6 into staging-nextGreg Kroah-Hartman3-4/+9
We want the fixes in here as well as this resolves an iio driver merge issue. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19vt: selection: allow functions to be called from inside kernelOkash Khawaja2-19/+34
This patch breaks set_selection() into two functions so that when called from kernel, copy_from_user() can be avoided. The two functions are called set_selection_user() and set_selection_kernel() in order to be explicit about their purposes. This also means updating any references to set_selection() and fixing for name change. It also exports set_selection_kernel() and paste_selection(). These changes are used the following patch where speakup's selection functionality calls into the above functions, thereby doing away with parallel implementation. Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Gregory Nowak <greg@gregn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19sc16is7xx: put err_spi and err_i2c into correct #ifdefGuoqing Jiang1-2/+2
err_spi is only called within SERIAL_SC16IS7XX_SPI while err_i2c is called inside SERIAL_SC16IS7XX_I2C. So we need to put err_spi and err_i2c into each #ifdef accordingly. This change fixes ("sc16is7xx: move label 'err_spi' to correct section"). Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17vt: fix cursor when clearing the screenMikulas Patocka1-1/+2
The patch a6dbe4427559 ("vt: perform safe console erase in the right order") introduced a bug. The conditional do_update_region() was replaced by a call to update_region() that does contain the conditional already, but with unwanted extra side effects such as restoring the cursor drawing. In order to reproduce the bug: - use framebuffer console with the AMDGPU driver - type "links" to start the console www browser - press 'q' and space to exit links Now the cursor will be permanently visible in the center of the screen. It will stay there until something overwrites it. The bug goes away if we change update_region() back to the conditional do_update_region(). [ nico: reworded changelog ] Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Cc: stable@vger.kernel.org Fixes: a6dbe4427559 ("vt: perform safe console erase in the right order") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16tty:serial_core: Spelling mistakeHariprasad Kelam1-1/+1
fix spelling mistake "overriden" -> "overridden" This fix resolves warning reported by checkpatch tool. Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16sc16is7xx: move label 'err_spi' to correct sectionGuoqing Jiang1-0/+2
err_spi is used when SERIAL_SC16IS7XX_SPI is enabled, so make the label only available under SERIAL_SC16IS7XX_SPI option. Otherwise, the below warning appears. drivers/tty/serial/sc16is7xx.c:1523:1: warning: label ‘err_spi’ defined but not used [-Wunused-label] err_spi: ^~~~~~~ Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Fixes: ac0cdb3d9901 ("sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16serial: sh-sci: Fix HSCIF RX sampling point adjustmentGeert Uytterhoeven1-1/+1
The calculation of the sampling point has min() and max() exchanged. Fix this by using the clamp() helper instead. Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16serial: sh-sci: Fix HSCIF RX sampling point calculationGeert Uytterhoeven1-1/+3
There are several issues with the formula used for calculating the deviation from the intended rate: 1. While min_err and last_stop are signed, srr and baud are unsigned. Hence the signed values are promoted to unsigned, which will lead to a bogus value of deviation if min_err is negative, 2. Srr is the register field value, which is one less than the actual sampling rate factor, 3. The divisions do not use rounding. Fix this by casting unsigned variables to int, adding one to srr, and using a single DIV_ROUND_CLOSEST(). Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: stable <stable@vger.kernel.org> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16tty: Add NULL TTY driverVincent Whitchurch3-0/+124
If no console driver is enabled (or if a non-present driver is selected with something like console=null in an attempt to disable the console), opening /dev/console errors out, and init scripts and other userspace code that relies on the existence of a console will fail. Symlinking /dev/null to /dev/console does not solve the problem since /dev/null does not behave like a real TTY. To just provide a dummy console to userspace when no console driver is available or desired, add a ttynull driver which simply discards all writes. It can be chosen on the command line in the standard way, i.e. with console=ttynull. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16tty: vt: keyboard: Allow Unicode compose base charReinis Danne1-1/+1
Pass Unicode character to k_unicode handler function to honor possible accent_table definition. With introduction of KDSKBDIACRUC ioctl, it has been possible to set compose characters (diacr, base and result) to any Unicode character (below 0xf000 code point) as defined in struct kbdiacruc. But it does not work with characters beyond Latin-1 as base, because they are printed early and not passed to any of the handler functions, thus breaking compose and dead keys. It affects keyboard layouts defining such characters on level 1 and relying on dead keys to access level 3 (e.g., lv-modern with some modifications for extra characters on level 3 for ē, ā and ī keys). Signed-off-by: Reinis Danne <rei4dan@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16Revert "tty: fix NULL pointer issue when tty_port ops is not set"Johan Hovold1-5/+5
This reverts commit f4e68d58cf2b20a581759bbc7228052534652673. TTY drivers using the tty-port abstraction all provide a pointer to a set of port operations, which specifically cannot be NULL (or we'd find out at first attempt to open a port). Revert the recent commit which added unnecessary NULL-checks and whose commit message indicated that it was fixing a real problem, which it did not. Note that even the two tty drivers for virtual devices currently providing an empty set of operations probably should be implementing at least some of the callbacks. Cc: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16serial: Add Milbeaut serial controlSugaya Taichi3-0/+648
Add Milbeaut serial control including earlycon and console. Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16tty/vt: avoid high order pages allocation on GIO_UNIMAP ioctlKonstantin Khorenko1-4/+4
GIO_UNIMAP can easily result in a high order allocation, seen 6th order allocation on radeondrmfb: fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x64 radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device WARNING: CPU: 0 PID: 78661 at mm/page_alloc.c:3532 __alloc_pages_nodemask+0x1b1/0x600 order 6 >= 3, gfp 0x40d0 The warning is generated by a debug patch. At the same time it's safe to use kvmalloc() for allocation in con_get_unimap(), so let's do the substitution. And do the same for con_set_unimap(). Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16tty: remove redundant 'default n' from Kconfig-sBartlomiej Zolnierkiewicz3-8/+0
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16serial: sprd: Fix a copy-paste err in sprd_request_dma()YueHaibing1-1/+1
when dma_request_chan rx_dma fails, dev_err log should print rx_dma err log. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16n_tty: check for negative and zero space return from tty_write_roomColin Ian King1-2/+2
The return from tty_write_room could potentially be negative if a tty write_room driver returns an error number (not that any seem to do). Rather than just check for a zero return, also check for a -ve return. This avoids the unsigned nr being set to a large unsigned value on the assignment from variable space and can lead to overflowing the buffer buf. Better to be safe than assume all write_room implementations in tty drivers are going to do the right thing. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon2-2/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04tty: fix up a few remaining files without SPDX identifiersGreg Kroah-Hartman7-0/+7
There were a few straggling files under drivers/tty/ that did not have any SPDX identifier either because they entered the tree recently, or they somehow missed the mass-tagging of commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") This commit follows the same rule as b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") where files without any specified license in them fall under GPL-2.0 as the correct license for the individual file. Add that identifier to these remaining files so that we don't have to guess at the license of them in the future. Cc: Jiri Slaby <jslaby@suse.com> Cc: "David S. Miller" <davem@davemloft.net> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04tty: add SPDX identifiers to Kconfig and MakefilesGreg Kroah-Hartman9-0/+9
There were a few Kconfig and Makefiles under drivers/tty/ that were missing a SPDX identifier. Fix that up so that automated tools can properly classify all kernel source files. Cc: Jiri Slaby <jslaby@suse.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Rob Herring <robh@kernel.org> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01Merge 5.1-rc3 into tty-nextGreg Kroah-Hartman10-51/+74
We want the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-29Revert "tty: pty: Fix race condition between release_one_tty and pty_write"Greg Kroah-Hartman2-10/+0
This reverts commit b9ca5f8560af244489b4a1bc1ae88b341f24bc95 as 0-day shows it has a circular locking dependency. Fixes: b9ca5f8560af ("tty: pty: Fix race condition between release_one_tty and pty_write") Reported-by: kernel test robot <lkp@intel.com> Cc: Sahara <keun-o.park@darkmatter.ae> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28vt: use /dev/vcs (not /dev/vcs0) in commentJakub Wilk1-1/+1
Both /dev/vcs and /dev/vcs0 were in use in the past, but these days /dev/vcs0 is mostly historical curiosity. * "/dev/vcs" is the name that has always been in the Linux allocated devices list. * "vcs" is the device name in sysfs since Linux v2.6.12. * MAKEDEV(1) in Debian used to create /dev/vcs0 only, but /dev/vcs was added in 1999: https://bugs.debian.org/45698 * MAKEDEV(1) in RedHat switched from /dev/vcs0 to /dev/vcs in 2000: * Fri Oct 20 2000 Nalin Dahyabhai <nalin@redhat.com> - change vcs0 to vcs (ditto for vcsa0) Signed-off-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty: pty: Fix race condition between release_one_tty and pty_writeSahara2-0/+10
Especially when a linked tty is used such as pty, the linked tty port's buf works have not been cancelled while master tty port's buf work has been cancelled. Since release_one_tty and flush_to_ldisc run in workqueue threads separately, when pty_cleanup happens and link tty port is freed, flush_to_ldisc tries to access freed port and port->itty, eventually it causes a panic. This patch utilizes the magic value with holding the tty_mutex to check if the tty->link is valid. Fixes: 2b022ab7542d ("pty: cancel pty slave port buf's work in tty_release") Signed-off-by: Sahara <keun-o.park@darkmatter.ae> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 11:05:55 +0000