summaryrefslogtreecommitdiffstats
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2022-06-10serial: 8250: Store to lsr_save_flags after lsr readIlpo Järvinen1-0/+2
Not all LSR register flags are preserved across reads. Therefore, LSR readers must store the non-preserved bits into lsr_save_flags. This fix was initially mixed into feature commit f6f586102add ("serial: 8250: Handle UART without interrupt on TEMT using em485"). However, that feature change had a flaw and it was reverted to make room for simpler approach providing the same feature. The embedded fix got reverted with the feature change. Re-add the lsr_save_flags fix and properly mark it's a fix. Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Cc: stable <stable@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10tty: goldfish: Fix free_irq() on removeVincent Whitchurch1-1/+1
Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ... Fixes: 465893e18878e119 ("tty: goldfish: support platform_device with id -1") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220609141704.1080024-1-vincent.whitchurch@axis.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10tty: serial: qcom-geni-serial: Implement start_rx callbackVijaya Krishna Nivarthi1-0/+1
In suspend sequence stop_rx will be performed only if implementation for start_rx callback is present. Set qcom_geni_serial_start_rx as callback for start_rx so that stop_rx is performed. Fixes: c9d2325cdb92 ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/1654627965-1461-3-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: core: Introduce callback for start_rx and do stop_rx in suspend only ↵Vijaya Krishna Nivarthi1-3/+6
if this callback implementation is present. In suspend sequence there is a need to perform stop_rx during suspend sequence to prevent any asynchronous data over rx line. However this can cause problem to drivers which dont do re-start_rx during set_termios. Add new callback start_rx and perform stop_rx only when implementation of start_rx is present. Also add call to start_rx in resume sequence so that drivers who come across this problem can make use of this framework. Fixes: c9d2325cdb92 ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/1654627965-1461-2-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10tty: n_gsm: Debug output allocation must use GFP_ATOMICTony Lindgren1-1/+1
Dan Carpenter <dan.carpenter@oracle.com> reported the following Smatch warning: drivers/tty/n_gsm.c:720 gsm_data_kick() warn: sleeping in atomic context This is because gsm_control_message() is holding a spin lock so gsm_hex_dump_bytes() needs to use GFP_ATOMIC instead of GFP_KERNEL. Fixes: 925ea0fa5277 ("tty: n_gsm: Fix packet data hex dump output") Cc: stable <stable@kernel.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220523155052.57129-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-04Merge tag 'for-linus-5.19-rc1b-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer
2022-06-03Merge tag 'ptrace_stop-cleanup-for-v5.19' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace_stop cleanups from Eric Biederman: "While looking at the ptrace problems with PREEMPT_RT and the problems Peter Zijlstra was encountering with ptrace in his freezer rewrite I identified some cleanups to ptrace_stop that make sense on their own and move make resolving the other problems much simpler. The biggest issue is the habit of the ptrace code to change task->__state from the tracer to suppress TASK_WAKEKILL from waking up the tracee. No other code in the kernel does that and it is straight forward to update signal_wake_up and friends to make that unnecessary. Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying on the fact that all stopped states except the special stop states can tolerate spurious wake up and recover their state. The state of stopped and traced tasked is changed to be stored in task->jobctl as well as in task->__state. This makes it possible for the freezer to recover tasks in these special states, as well as serving as a general cleanup. With a little more work in that direction I believe TASK_STOPPED can learn to tolerate spurious wake ups and become an ordinary stop state. The TASK_TRACED state has to remain a special state as the registers for a process are only reliably available when the process is stopped in the scheduler. Fundamentally ptrace needs acess to the saved register values of a task. There are bunch of semi-random ptrace related cleanups that were found while looking at these issues. One cleanup that deserves to be called out is from commit 57b6de08b5f6 ("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This makes a change that is technically user space visible, in the handling of what happens to a tracee when a tracer dies unexpectedly. According to our testing and our understanding of userspace nothing cares that spurious SIGTRAPs can be generated in that case" * tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state ptrace: Always take siglock in ptrace_resume ptrace: Don't change __state ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs ptrace: Document that wait_task_inactive can't fail ptrace: Reimplement PTRACE_KILL by always sending SIGKILL signal: Use lockdep_assert_held instead of assert_spin_locked ptrace: Remove arch_ptrace_attach ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP signal: Replace __group_send_sig_info with send_signal_locked signal: Rename send_signal send_signal_locked
2022-06-03Merge tag 'tty-5.19-rc1' of ↵Linus Torvalds73-1419/+2090
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...
2022-06-01xen: replace xen_remap() with memremap()Juergen Gross1-1/+1
xen_remap() is used to establish mappings for frames not under direct control of the kernel: for Xenstore and console ring pages, and for grant pages of non-PV guests. Today xen_remap() is defined to use ioremap() on x86 (doing uncached mappings), and ioremap_cache() on Arm (doing cached mappings). Uncached mappings for those use cases are bad for performance, so they should be avoided if possible. As all use cases of xen_remap() don't require uncached mappings (the mapped area is always physical RAM), a mapping using the standard WB cache mode is fine. As sparse is flagging some of the xen_remap() use cases to be not appropriate for iomem(), as the result is not annotated with the __iomem modifier, eliminate xen_remap() completely and replace all use cases with memremap() specifying the MEMREMAP_WB caching mode. xen_unmap() can be replaced with memunmap(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220530082634.6339-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-27Merge tag 'mm-nonmm-stable-2022-05-26' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "The non-MM patch queue for this merge window. Not a lot of material this cycle. Many singleton patches against various subsystems. Most notably some maintenance work in ocfs2 and initramfs" * tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits) kcov: update pos before writing pc in trace function ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock fs/ntfs: remove redundant variable idx fat: remove time truncations in vfat_create/vfat_mkdir fat: report creation time in statx fat: ignore ctime updates, and keep ctime identical to mtime in memory fat: split fat_truncate_time() into separate functions MAINTAINERS: add Muchun as a memcg reviewer proc/sysctl: make protected_* world readable ia64: mca: drop redundant spinlock initialization tty: fix deadlock caused by calling printk() under tty_port->lock relay: remove redundant assignment to pointer buf fs/ntfs3: validate BOOT sectors_per_clusters lib/string_helpers: fix not adding strarray to device's resource list kernel/crash_core.c: remove redundant check of ck_cmdline ELF, uapi: fixup ELF_ST_TYPE definition ipc/mqueue: use get_tree_nodev() in mqueue_get_tree() ipc: update semtimedop() to use hrtimer ipc/sem: remove redundant assignments ...
2022-05-26Merge tag 'asm-generic-5.19' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "The asm-generic tree contains three separate changes for linux-5.19: - The h8300 architecture is retired after it has been effectively unmaintained for a number of years. This is the last architecture we supported that has no MMU implementation, but there are still a few architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with and without an MMU. - A series to add a generic ticket spinlock that can be shared by most architectures with a working cmpxchg or ll/sc type atomic, including the conversion of riscv, csky and openrisc. This series is also a prerequisite for the loongarch64 architecture port that will come as a separate pull request. - A cleanup of some exported uapi header files to ensure they can be included from user space without relying on other kernel headers" * tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: h8300: remove stale bindings and symlink sparc: add asm/stat.h to UAPI compile-test coverage powerpc: add asm/stat.h to UAPI compile-test coverage mips: add asm/stat.h to UAPI compile-test coverage riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h> agpgart.h: do not include <stdlib.h> from exported header csky: Move to generic ticket-spinlock RISC-V: Move to queued RW locks RISC-V: Move to generic spinlocks openrisc: Move to ticket-spinlock asm-generic: qrwlock: Document the spinlock fairness requirements asm-generic: qspinlock: Indicate the use of mixed-size atomics asm-generic: ticket-lock: New generic ticket-based spinlock remove the h8300 architecture
2022-05-26Merge tag 'arm-multiplatform-5.19-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...
2022-05-25Merge tag 'sound-5.19-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Not much dramatic changes at this time, but we've received quite a lot of changes for ASoC, while there are still a few fixes and quirks for usual HD- and USB-auido. Here are some highlights. ASoC: - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs - Initial stages of Intel AVS driver merge - Introduction of v4 IPC mechanism for SOF - TDM mode support for AK4613 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780 Others: - A few regression fixes after the USB-audio endpoint management refactoring - More enhancements for Cirrus HD-audio codec support (still ongoing) - Addition of generic serial MIDI driver" * tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits) ALSA: hda/realtek - Add new type for ALC245 ALSA: usb-audio: Configure sync endpoints before data ALSA: ctxfi: fix typo in comment ALSA: cs5535audio: fix typo in comment ALSA: ctxfi: Add SB046x PCI ID ALSA: usb-audio: Add missing ep_idx in fixed EP quirks ALSA: usb-audio: Workaround for clock setup on TEAC devices ALSA: lola: Bounds check loop iterator against streams array size ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv() ASoC: rt1308-sdw: add the default value of register 0xc320 ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic ASoC: rt9120: Fix 3byte read, valule offset typo ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver. ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition() ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR' ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get() ASoC: SOF: mediatek: remove duplicate include in mt8195.c ASoC: SOF: mediatek: Add mt8195 debug dump ASoC: SOF: mediatek: Add mediatek common debug dump ...
2022-05-25Merge tag 'printk-for-5.19' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Offload writing printk() messages on consoles to per-console kthreads. It prevents soft-lockups when an extensive amount of messages is printed. It was observed, for example, during boot of large systems with a lot of peripherals like disks or network interfaces. It prevents live-lockups that were observed, for example, when messages about allocation failures were reported and a CPU handled consoles instead of reclaiming the memory. It was hard to solve even with rate limiting because it would need to take into account the amount of messages and the speed of all consoles. It is a must to have for real time. Otherwise, any printk() might break latency guarantees. The per-console kthreads allow to handle each console on its own speed. Slow consoles do not longer slow down faster ones. And printk() does not longer unpredictably slows down various code paths. There are situations when the kthreads are either not available or not reliable, for example, early boot, suspend, or panic. In these situations, printk() uses the legacy mode and tries to handle consoles immediately. - Add documentation for the printk index. * tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk, tracing: fix console tracepoint printk: remove @console_locked printk: extend console_lock for per-console locking printk: add kthread console printers printk: add functions to prefer direct printing printk: add pr_flush() printk: move buffer definitions into console_emit_next_record() caller printk: refactor and rework printing logic printk: add con_printk() macro for console details printk: call boot_delay_msec() in printk_delay() printk: get caller_id/timestamp after migration disable printk: wake waiters for safe and NMI contexts printk: wake up all waiters printk: add missing memory barrier to wake_up_klogd() printk: cpu sync always disable interrupts printk: rename cpulock functions printk/index: Printk index feature documentation MAINTAINERS: Add printk indexing maintainers on mention of printk_index
2022-05-23Merge tag 'm68k-for-v5.19-tag1' of ↵Linus Torvalds1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Introduce virtual m68k machine based on Android Goldfish devices - defconfig updates - Minor fixes and improvements * tag 'm68k-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: atari: Make Atari ROM port I/O write macros return void m68k: math-emu: Fix dependencies of math emulation support m68k: math-emu: Fix typos in comments m68k: Wire up syscall_trace_enter/leave for m68k m68k: defconfig: Update defconfigs for v5.18-rc1 m68k: Introduce a virtual m68k machine clocksource/drivers: Add a goldfish-timer clocksource rtc: goldfish: Use gf_ioread32()/gf_iowrite32() tty: goldfish: Introduce gf_ioread32()/gf_iowrite32()
2022-05-23Merge tag 'asoc-v5.19' of ↵Takashi Iwai1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.19 This is quite a big update, partly due to the addition of some larger drivers (more of which is to follow since at least the AVS driver is still a work in progress) and partly due to Charles' work sorting out our handling of endianness. As has been the case recently it's much more about drivers than the core. - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs. - Initial stages of Intel AVS driver merge. - Introduction of v4 IPC mechanism for SOF. - TDM mode support for AK4613. - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
2022-05-19tty: Rework receive flow control char logicIlpo Järvinen1-5/+11
Add a helper to check if the character is a flow control one. This rework prepares for adding lookahead done check cleanly to n_tty_receive_char_flow_ctrl() between n_tty_is_char_flow_ctrl() and the actions taken on the flow control characters. No functional changes intended. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220426144935.54893-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: stm32-usart: Correct CSIZE, bits, and parityIlpo Järvinen1-3/+12
Add CSIZE sanitization for unsupported CSIZE configurations. In addition, if parity is asked for but CSx was unsupported, the sensible result is CS8+parity which requires setting USART_CR1_M0 like with 9 bits. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c8a9d043947b (serial: stm32: fix word length configuration) Cc: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: st-asc: Sanitize CSIZE and correct PARENB for CS7Ilpo Järvinen1-0/+4
Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has to have parity, thus add PARENB. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.) Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: sifive: Sanitize CSIZE and c_iflagIlpo Järvinen1-1/+5
Only CS8 is supported but CSIZE was not sanitized to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Similarly, INPCK, PARMRK, and BRKINT are reported textually unsupported but were not cleared in termios c_iflag which is the machine-readable format. Fixes: 45c054d0815b (tty: serial: add driver for the SiFive UART) Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: sh-sci: Don't allow CS5-6Ilpo Järvinen1-1/+5
Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: txx9: Don't allow CS5-6Ilpo Järvinen1-0/+2
Only CS7 and CS8 are supported but CSIZE is not sanitized with CS5 or CS6 to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: rda-uart: Don't allow CS5-6Ilpo Järvinen1-0/+2
Only CS7 and CS8 are supported but CSIZE is not sanitized after fallthrough from CS5 or CS6 to CS7. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c10b13325ced (tty: serial: Add RDA8810PL UART driver) Cc: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: digicolor-usart: Don't allow CS5-6Ilpo Järvinen1-0/+2
Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in the default: block. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 5930cb3511df (serial: driver for Conexant Digicolor USART) Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: uartlite: Fix BRKINT clearingIlpo Järvinen1-1/+2
BRKINT is within c_iflag rather than c_cflag. Fixes: ea017f5853e9 (tty: serial: uartlite: Prevent changing fixed parameters) Reviewed-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLEYueHaibing1-1/+1
drivers/tty/serial/cpm_uart/cpm_uart_core.c: In function ‘cpm_uart_init_port’: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1251:7: error: ‘udbg_port’ undeclared (first use in this function); did you mean ‘uart_port’? if (!udbg_port) ^~~~~~~~~ uart_port commit d142585bceb3 leave this corner, wrap it with #ifdef block Fixes: d142585bceb3 ("serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220518135452.39480-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: core: Do stop_rx in suspend path for console if console_suspend is ↵Vijaya Krishna Nivarthi1-2/+9
disabled For the case of console_suspend disabled, if back to back suspend/resume test is executed, at the end of test, sometimes console would appear to be frozen not responding to input. This would happen because, during resume, rx transactions can come in before system is ready, malfunction of rx happens in turn resulting in console appearing to be stuck. Do a stop_rx in suspend sequence to prevent this. Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/1652692810-31148-1-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find ↵Vijaya Krishna Nivarthi1-20/+36
suitable frequency with call to clk_round_rate. Replace the UART frequency table 'root_freq[]' with logic around clk_round_rate() so that SoC details like the available clk frequencies can change and this driver still works. This reduces tight coupling between this UART driver and the SoC clk driver because we no longer have to update the 'root_freq[]' array for new SoCs. Instead the driver determines the available frequencies at runtime. Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/1652697510-30543-1-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485Ilpo Järvinen1-4/+4
SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND relate to behavior within RS485 operation. The driver checks if they have the same value which is not possible to realize with the hardware. The check is taken regardless of SER_RS485_ENABLED flag and -EINVAL is returned when the check fails, which creates problems. This check makes it unnecessarily complicated to turn RS485 mode off as simple zeroed serial_rs485 struct will trigger that equal values check. In addition, the driver itself memsets its rs485 structure to zero when RS485 is disabled but if userspace would try to make an TIOCSRS485 ioctl() call with the very same struct, it would end up failing with -EINVAL which doesn't make much sense. Resolve the problem by moving the check inside SER_RS485_ENABLED block. Fixes: 7ecc77011c6f ("serial: 8250_fintek: Return -EINVAL on invalid configuration") Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/035c738-8ea5-8b17-b1d7-84a7b3aeaa51@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"AngeloGioacchino Del Regno1-7/+0
It was found that some MediaTek SoCs are incompatible with this change. Also, this register was mistakenly understood as it was related to the 16550A register layout selection but, at least on some IPs, if not all, it's related to something else unknown. This reverts commit 6f81fdded0d024c7d4084d434764f30bca1cd6b1. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Fixes: 6f81fdded0d0 ("serial: 8250_mtk: Make sure to select the right FEATURE_SEL") Reported-by: "kernelci.org bot" <bot@kernelci.org> Link: https://lore.kernel.org/r/20220510122620.150342-1-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: msm_serial: disable interrupts in __msm_console_write()John Ogness1-0/+5
__msm_console_write() assumes that interrupts are disabled, but with threaded console printers it is possible that the write() callback of the console is called with interrupts enabled. Explicitly disable interrupts using local_irq_save() to preserve the assumed context. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: meson: acquire port->lock in startup()John Ogness1-0/+13
The uart_ops startup() callback is called without interrupts disabled and without port->lock locked, relatively late during the boot process (from the call path of console_on_rootfs()). If the device is a console, it was already previously registered and could be actively printing messages. Since the startup() callback is reading/writing registers used by the console write() callback (AML_UART_CONTROL), its access must be synchronized using the port->lock. Currently it is not. The startup() callback is the only function that explicitly enables interrupts. Without the synchronization, it is possible that interrupts become accidentally permanently disabled. CPU0 CPU1 meson_serial_console_write meson_uart_startup -------------------------- ------------------ spin_lock(port->lock) val = readl(AML_UART_CONTROL) uart_console_write() writel(INT_EN, AML_UART_CONTROL) writel(val, AML_UART_CONTROL) spin_unlock(port->lock) Add port->lock synchronization to meson_uart_startup() to avoid racing with meson_serial_console_write(). Also add detailed comments to meson_uart_reset() explaining why it is *not* using port->lock synchronization. Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20220508103547.626355-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_dw: Use dev_err_probe()Andy Shevchenko1-17/+11
Simplify the error path in ->probe() a bit by using dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220509172129.37770-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_dw: Use devm_add_action_or_reset()Andy Shevchenko1-32/+31
Slightly simplify ->probe() and drop a few goto labels by using devm_add_action_or_reset() for clock and reset cleanup. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220509172129.37770-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_dw: Update the list of OF headers used by driverAndy Shevchenko1-2/+1
The of_irq.h and of_platform.h are not used by the driver. On the other hand, the mod_devicetable.h missed. Drop the former two and add the latter one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220509161911.37164-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: jsm: Use B0 instead of 0Ilpo Järvinen2-2/+2
Use B0 to check zero baudrate rather than literal 0. While at it, remove extra parenthesis around CBAUD. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: fsl_lpuart: Remove unnecessary clearing for CRTSCTSIlpo Järvinen1-5/+3
if (termios->c_cflag & CRTSCTS) guarantees that CRTSCTS is not ever set in the else block so clearing it is unnecessary. While at it, remove also one pair of extra parenthesis. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: remove IBSHIFT ifdefsIlpo Järvinen1-12/+3
IBSHIFT is defined by all architectures since commit d0ffb805b729 ("arch/alpha, termios: implement BOTHER, IBSHIFT and termios2"). Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: remove BOTHER ifdefsIlpo Järvinen3-20/+7
BOTHER is defined by all architectures since commit d0ffb805b729 ("arch/alpha, termios: implement BOTHER, IBSHIFT and termios2"). Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: remove CMSPAR ifdefsIlpo Järvinen5-18/+0
CMSPAR is defined by all architectures since commit 6bf08cb246b5 ("[PATCH] Add CMSPAR to termbits.h for powerpc and alpha"). Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: serial: samsung_tty: Fix suspend/resume on S5LHector Martin1-0/+1
We were restoring the IRQ masks then clearing them again, because ucon_mask wasn't set properly. Adding that makes suspend/resume work as intended. Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220502092505.30934-1-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove initial printJiri Slaby1-2/+0
Don't report about the driver when loaded. It's unneeded and frowned upon nowadays. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove tracing printsJiri Slaby1-25/+1
Remove debug printouts upon function enter/exit. This can be achieved better by tracing. Remove also the one protected by DEBUG_HARD which is not defined anyway. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove unused uart_pmac_port::termios_cacheJiri Slaby2-4/+0
struct uart_pmac_port contains termios_cache. It is only written and never read. Remove it as it only occupies space. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove unfinished DBDMA supportJiri Slaby2-46/+1
The support for DBDMA was never completed. Remove the the code that only maps spaces without real work. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: amba-pl011: move header content to .cJiri Slaby2-37/+30
There is no point keeping the header content separated. In this case, it is only an enum. So move the enum to the appropriate source file. Cc: Russell King <linux@armlinux.org.uk> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075720.31402-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: n_gsm: Fix packet data hex dump outputTony Lindgren1-8/+23
The module param debug for n_gsm uses KERN_INFO level, but the hexdump now uses KERN_DEBUG level. This started after commit 091cb0994edd ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds"). We now use dynamic_hex_dump() unless DEBUG is set. This causes no packets to be seen with modprobe n_gsm debug=0x1f unlike earlier. Let's fix this by adding gsm_hex_dump_bytes() that calls print_hex_dump() with KERN_INFO to match what n_gsm is doing with the other debug related output. Fixes: 091cb0994edd ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds") Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220512131506.1216-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-16Merge 5.18-rc7 into usb-nextGreg Kroah-Hartman4-29/+43
We need the tty fixes in here as well, as we need to revert one of them :( Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12tty: fix deadlock caused by calling printk() under tty_port->lockQi Zheng1-1/+2
pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner); As commit dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 [inline] <-- lock(console_owner); vprintk_emit+0x307/0x470 kernel/printk/printk.c:2023 vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 fail_dump lib/fault-inject.c:45 [inline] should_fail+0x67b/0x7c0 lib/fault-inject.c:144 __should_failslab+0x152/0x1c0 mm/failslab.c:33 should_failslab+0x5/0x10 mm/slab_common.c:1224 slab_pre_alloc_hook mm/slab.h:468 [inline] slab_alloc_node mm/slub.c:2723 [inline] slab_alloc mm/slub.c:2807 [inline] __kmalloc+0x72/0x300 mm/slub.c:3871 kmalloc include/linux/slab.h:582 [inline] tty_buffer_alloc+0x23f/0x2a0 drivers/tty/tty_buffer.c:175 __tty_buffer_request_room+0x156/0x2a0 drivers/tty/tty_buffer.c:273 tty_insert_flip_string_fixed_flag+0x93/0x250 drivers/tty/tty_buffer.c:318 tty_insert_flip_string include/linux/tty_flip.h:37 [inline] pty_write+0x126/0x1f0 drivers/tty/pty.c:122 <-- lock(&port->lock); n_tty_write+0xa7a/0xfc0 drivers/tty/n_tty.c:2356 do_tty_write drivers/tty/tty_io.c:961 [inline] tty_write+0x512/0x930 drivers/tty/tty_io.c:1045 __vfs_write+0x76/0x100 fs/read_write.c:494 [...] other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &port->lock Link: https://lkml.kernel.org/r/20220511061951.1114-2-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20220510113809.80626-2-zhengqi.arch@bytedance.com Fixes: b6da31b2c07c ("tty: Fix data race in tty_insert_flip_string_fixed_flag") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-11signal: Replace __group_send_sig_info with send_signal_lockedEric W. Biederman1-2/+2
The function __group_send_sig_info is just a light wrapper around send_signal_locked with one parameter fixed to a constant value. As the wrapper adds no real value update the code to directly call the wrapped function. Tested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lkml.kernel.org/r/20220505182645.497868-2-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 19:08:36 +0000