summaryrefslogtreecommitdiffstats
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2015-05-06Merge tag 'for-linus-4.1b-rc2-tag' of ↵Linus Torvalds1-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - fix blkback regression if using persistent grants - fix various event channel related suspend/resume bugs - fix AMD x86 regression with X86_BUG_SYSRET_SS_ATTRS - SWIOTLB on ARM now uses frames <4 GiB (if available) so device only capable of 32-bit DMA work. * tag 'for-linus-4.1b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARM hypervisor/x86/xen: Unset X86_BUG_SYSRET_SS_ATTRS on Xen PV guests xen/events: Set irq_info->evtchn before binding the channel to CPU in __startup_pirq() xen/console: Update console event channel on resume xen/xenbus: Update xenbus event channel on resume xen/events: Clear cpu_evtchn_mask before resuming xen-pciback: Add name prefix to global 'permissive' variable xen: Suspend ticks on all CPUs during suspend xen/grant: introduce func gnttab_unmap_refs_sync() xen/blkback: safely unmap purge persistent grants
2015-05-05xen/console: Update console event channel on resumeBoris Ostrovsky1-1/+17
After a resume the hypervisor/tools may change console event channel number. We should re-query it. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-04-28serial: 8250_pci: Add support for 16 port Exar boardsSoeren Grunewald1-2/+23
The Exar XR17V358 chip usually provides only 8 ports. But two chips can be combined to act as a single 16 port chip. Therefor one chip is configured as master the second as slave by connecting the mode pin to VCC (master) or GND (slave). Then the master chip is reporting a different device-id depending on whether a slave is detected or not. The UARTs 8-15 are addressed from 0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to address all 16 ports as before. See: https://www.exar.com/common/content/document.ashx?id=1587 page 11 Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28serial: samsung: fix serial console breakRobert Baldyga1-2/+3
This patch fixes problems with serial console break. When function s3c64xx_serial_startup() was started while serial console has been working, it caused lose of characters written to TX FIFO. This effect was particularly observable with systemd, which closes serial port every time when it's not currently needed, hence function s3c64xx_serial_startup() is called quite often there. To fix this problem we avoid resetting TX FIFO if port is used as serial console. Example of broken console log: [ 1086.7 Expecting device dev-ttySAC1.device... [ 1086.[ OK ] Reached target Paths. [ 1086.756416] s[ OK ] Reached target Swap. [ 1086.776413] systemd[1]: Reached target Swap. [ 1086.776642] systemd[1]: Starting Root Slice. [ 5.53403[ OK ] Created slice Root Slice. [ 5.548433] systemd[1]: Create[ OK ] Created slice User and Session Slice. [ 5.568414] sys[ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 5.588388] s[ OK ] Listening on Delayed Shutdown Socket. [ 5.608376] sy[ OK ] Listening on Journal Socket (/dev/log). [ 5.628361] [ OK ] Listening on udev Kernel Socket. [ 5.648357] s[ OK ] Listening on udev Control Socket. [ 5.668353] s[ OK ] Listening on Journal Socket. [ 5.688366] systemd[1]: Listeni[ OK ] Created slice System Slice. [ 5.708393] Mounting Temporary Directory... [ 7139.067436] Starting prepare device daemon... [ 7139.091726] sy Starting Generate environment from /etc/profile.d... [ 5.792867] system Starting Create Static Device Nodes in /dev... [ 7848.718 Mounting Debug File System... [ 7848.7384 Mounting Configuration File System... [ 5.852 Starting Apply Kernel Variables... [ 5.8720 Starting Setup Virtual Console... [ 7848.798 Starting udev Coldplug all Devices... [ 7848.817 Starting Journal Service... [ OK ] Started Journal Service. [ 7848.854222] s[ OK ] Reached target Slices. Starting Remount Root and Kernel File Systems... [ OK ] Mounted Configuration File System. Reported-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28tty/serial: at91: maxburst was missing for dma transfersLudovic Desroches1-0/+2
Maxburst was not set when doing the dma slave configuration. This value is checked by the recently introduced xdmac. It causes an error when doing the slave configuration and so prevents from using dma. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <stable@vger.kernel.org> # 3.12 and later Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28serial: of-serial: Remove device_type = "serial" registrationMichal Simek1-1/+0
Do not probe all serial drivers by of_serial.c which are using device_type = "serial"; property. Only drivers which have valid compatible strings listed in the driver should be probed. When PORT_UNKNOWN is setup probe will fail anyway. Arnd quotation about driver historical background: "when I wrote that driver initially, the idea was that it would get used as a stub to hook up all other serial drivers but after that, the common code learned to create platform devices from DT" This patch fix the problem with on the system with xilinx_uartps and 16550a where of_serial failed to register for xilinx_uartps and because of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking for irq with request_irq() EINVAL is returned. Signed-off-by: Michal Simek <michal.simek@xilinx.com> CC: <stable@vger.kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28serial: xilinx: Use platform_get_irq to get irq description structureMichal Simek2-11/+12
For systems with CONFIG_SERIAL_OF_PLATFORM=y and device_type = "serial"; property in DT of_serial.c driver maps and unmaps IRQ (because driver probe fails). Then a driver is called but irq mapping is not created that's why driver is failing again in again on request_irq(). Based on this use platform_get_irq() instead of platform_get_resource() which is doing irq_desc allocation and driver itself can request IRQ. Fix both xilinx serial drivers in the tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28serial: core: Fix kernel-doc build warningsPeter Hurley1-1/+1
Fix uart_console_write() kernel-doc build warnings. Warning(drivers/tty/serial/serial_core.c:1778): No description found for parameter 'putchar' Warning(drivers/tty/serial/serial_core.c:1778): Excess function parameter 'write' description in 'uart_console_write' Fixes: 1cfe42b7fd29 ("serial: core: Fix kernel doc for uart_console_write()") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28tty: Re-add external interface for tty_set_termios()Frederic Danis1-1/+2
This is needed by Bluetooth hci_uart module to be able to change speed of Bluetooth controller and local UART. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-24Merge tag 'devicetree-for-4.1' of ↵Linus Torvalds3-1/+27
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull second batch of devicetree updates from Rob Herring: "As Grant mentioned in the first devicetree pull request, here is the 2nd batch of DT changes for 4.1. The main remaining item here is the endianness bindings and related 8250 driver support. - DT endianness specification bindings - big-endian 8250 serial support - DT overlay unittest updates - various DT doc updates - compile fixes for OF_IRQ=n" * tag 'devicetree-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: frv: add io{read,write}{16,32}be functions mn10300: add io{read,write}{16,32}be functions Documentation: DT bindings: add doc for Altera's SoCFPGA platform of: base: improve of_get_next_child() kernel-doc Doc: dt: arch_timer: discourage clock-frequency use of: unittest: overlay: Keep track of created overlays of/fdt: fix allocation size for device node path serial: of_serial: Support big-endian register accesses serial: 8250: Add support for big-endian MMIO accesses of: Document {little,big,native}-endian bindings of/fdt: Add endianness helper function for early init code of: Add helper function to check MMIO register endianness of/fdt: Remove "reg" data prints from early_init_dt_scan_memory of: add vendor prefix for Artesyn of: Add dummy of_irq_to_resource_table() for IRQ_OF=n of: OF_IRQ should depend on IRQ_DOMAIN
2015-04-21Merge tag 'tty-4.1-rc1' of ↵Linus Torvalds52-4438/+1442
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver update for 4.1-rc1. It was delayed for a bit due to some questions surrounding some of the console command line parsing changes that are in here. There's still one tiny regression for people who were previously putting multiple console command lines and expecting them all to be ignored for some odd reason, but Peter is working on fixing that. If not, I'll send a revert for the offending patch, but I have faith that Peter can address it. Other than the console work here, there's the usual serial driver updates and changes, and a buch of 8250 reworks to try to make that driver easier to maintain over time, and have it support more devices in the future. All of these have been in linux-next for a while" * tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) n_gsm: Drop unneeded cast on netdev_priv sc16is7xx: expose RTS inversion in RS-485 mode serial: 8250_pci: port failed after wakeup from S3 earlycon: 8250: Document kernel command line options earlycon: 8250: Fix command line regression earlycon: Fix __earlycon_table stride tty: clean up the tty time logic a bit serial: 8250_dw: only get the clock rate in one place serial: 8250_dw: remove useless ACPI ID check dmaengine: hsu: move memory allocation to GFP_NOWAIT dmaengine: hsu: remove redundant pieces of code serial: 8250_pci: add Intel Tangier support dmaengine: hsu: add Intel Tangier PCI ID serial: 8250_pci: replace switch-case by formula for Intel MID serial: 8250_pci: replace switch-case by formula tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1 serial: jsm: some off by one bugs serial: xuartps: Fix check in console_setup(). serial: xuartps: Get rid of register access macros. serial: xuartps: Fix iobase use. ...
2015-04-17Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-0/+1351
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for Linux 4.1. Most noteworthy: - Add more Octeon-optimized crypto functions - Octeon crypto preemption and locking fixes - Little endian support for Octeon - Use correct CSR to soft reset Octeons - Support LEDs on the Octeon-based DSR-1000N - Fix PCI interrupt mapping for the Octeon-based DSR-1000N - Mark prom_free_prom_memory() as __init for a number of systems - Support for Imagination's Pistachio SOC. This includes arch and CLK bits. I'd like to merge pinctrl bits later - Improve parallelism of csum_partial for certain pipelines - Organize DTB files in subdirs like other architectures - Implement read_sched_clock for all MIPS platforms other than Octeon - Massive series of 38 fixes and cleanups for the FPU emulator / kernel - Further FPU remulator work to support new features. This sits on a separate branch which also has been pulled into the 4.1 KVM branch - Clean up and fixes for the SEAD3 eval board; remove unused file - Various updates for Netlogic platforms - A number of small updates for Loongson 3 platforms - Increase the memory limit for ATH79 platforms to 256MB - A fair number of fixes and updates for BCM47xx platforms - Finish the implementation of XPA support - MIPS FDC support. No, not floppy controller but Fast Debug Channel :) - Detect the R16000 used in SGI legacy platforms - Fix Kconfig dependencies for the SSB bus support" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits) MIPS: Makefile: Fix MIPS ASE detection code MIPS: asm: elf: Set O32 default FPU flags MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G MIPS: Kconfig: Disable SMP/CPS for 64-bit MIPS: Hibernate: flush TLB entries earlier MIPS: smp-cps: cpu_set FPU mask if FPU present MIPS: lose_fpu(): Disable FPU when MSA enabled MIPS: ralink: add missing symbol for RALINK_ILL_ACC MIPS: ralink: Fix bad config symbol in PCI makefile. SSB: fix Kconfig dependencies MIPS: Malta: Detect and fix bad memsize values Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard. MIPS: Fix cpu_has_mips_r2_exec_hazard. MIPS: kernel: entry.S: Set correct ISA level for mips_ihb MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter MIPS: unaligned: Fix regular load/store instruction emulation for EVA MIPS: unaligned: Surround load/store macros in do {} while statements ...
2015-04-14Merge tag 'pm+acpi-4.1-rc1' of ↵Linus Torvalds1-12/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups all over, although there are a few items that sort of fall into the new feature category. First off, we have new callbacks for PM domains that should help us to handle some issues related to device initialization in a better way. There also is some consolidation in the unified device properties API area allowing us to use that inferface for accessing data coming from platform initialization code in addition to firmware-provided data. We have some new device/CPU IDs in a few drivers, support for new chips and a new cpufreq driver too. Specifics: - Generic PM domains support update including new PM domain callbacks to handle device initialization better (Russell King, Rafael J Wysocki, Kevin Hilman) - Unified device properties API update including a new mechanism for accessing data provided by platform initialization code (Rafael J Wysocki, Adrian Hunter) - ARM cpuidle update including ARM32/ARM64 handling consolidation (Daniel Lezcano) - intel_idle update including support for the Silvermont Core in the Baytrail SOC and for the Airmont Core in the Cherrytrail and Braswell SOCs (Len Brown, Mathias Krause) - New cpufreq driver for Hisilicon ACPU (Leo Yan) - intel_pstate update including support for the Knights Landing chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi) - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann) - powernv cpufreq driver update (Shilpasri G Bhat) - devfreq update including Tegra support changes (Tomeu Vizoso, MyungJoo Ham, Chanwoo Choi) - powercap RAPL (Running-Average Power Limit) driver update including support for Intel Broadwell server chips (Jacob Pan, Mathias Krause) - ACPI device enumeration update related to the handling of the special PRP0001 device ID allowing DT-style 'compatible' property to be used for ACPI device identification (Rafael J Wysocki) - ACPI EC driver update including limited _DEP support (Lan Tianyu, Lv Zheng) - ACPI backlight driver update including a new mechanism to allow native backlight handling to be forced on non-Windows 8 systems and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede) - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu) - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger, Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki) - Fixes related to suspend-to-idle for the iTCO watchdog driver and the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu) - PM tracing support for the suspend phase of system suspend/resume transitions (Zhonghui Fu) - Configurable delay for the system suspend/resume testing facility (Brian Norris) - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)" * tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) ACPI / scan: Fix NULL pointer dereference in acpi_companion_match() ACPI / scan: Rework modalias creation when "compatible" is present intel_idle: mark cpu id array as __initconst powercap / RAPL: mark rapl_ids array as __initconst powercap / RAPL: add ID for Broadwell server intel_pstate: Knights Landing support intel_pstate: remove MSR test cpufreq: fix qoriq uniprocessor build ACPI / scan: Take the PRP0001 position in the list of IDs into account ACPI / scan: Simplify acpi_match_device() ACPI / scan: Generalize of_compatible matching device property: Introduce firmware node type for platform data device property: Make it possible to use secondary firmware nodes PM / watchdog: iTCO: stop watchdog during system suspend cpufreq: hisilicon: add acpu driver ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler cpufreq: powernv: Report cpu frequency throttling intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs intel_idle: Update support for Silvermont Core in Baytrail SOC PM / devfreq: tegra: Register governor on module init ...
2015-04-14serial: of_serial: Support big-endian register accessesKevin Cernekee1-1/+2
If the device node has a "big-endian" property and 32-bit registers, tell the serial driver to use UPIO_MEM32BE instead of UPIO_MEM32. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org>
2015-04-14serial: 8250: Add support for big-endian MMIO accessesKevin Cernekee2-0/+25
Add cases for UPIO_MEM32BE wherever there are currently cases handling UPIO_MEM32. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org>
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-13Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-0/+1
Pull workqueue updates from Tejun Heo: "Workqueue now prints debug information at the end of sysrq-t which should be helpful when tracking down suspected workqueue stalls. It only prints out the ones with something currently going on so it shouldn't add much output in most cases" * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Reorder sysfs code percpu: Fix trivial typos in comments workqueue: dump workqueues on sysrq-t workqueue: keep track of the flushing task and pool manager workqueue: make the workqueues list RCU walkable
2015-04-13Merge branch 'pnp'Rafael J. Wysocki1-12/+1
* pnp: PNP: Avoid leaving unregistered device objects in lists PNP: Convert pnp_lock into a mutex PNP: tty/serial/8250/8250_fintek: Use module_pnp_driver to register driver PNP: platform/x86/apple-gmux: Use module_pnp_driver to register driver PNP: net/sb1000: Use module_pnp_driver to register driver PNP: media/rc: Use module_pnp_driver to register driver PNP: ide/ide-pnp: Use module_pnp_driver to register driver PNP: ata/pata_isapnp: Use module_pnp_driver to register driver PNP: tpm/tpm_infineon: Use module_pnp_driver to register driver PNP: Add helper macro for pnp_register_driver boilerplate PNP / ACPI: Use ACPI_COMPANION_SET() during initialization
2015-04-10n_gsm: Drop unneeded cast on netdev_privJulia Lawall1-5/+5
The result of netdev_priv is already implicitly cast to the type of the left side of the assignment. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; @@ x = - (T *) netdev_priv(...) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10sc16is7xx: expose RTS inversion in RS-485 modeJakub Kicinski1-9/+25
Hardware is capable of inverting RTS signal when working in RS-485 mode. Expose this functionality to user space. Relay on a matching combination of standard flags (SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND) to detect when user space is requesting inverted RTS mode. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10serial: 8250_pci: port failed after wakeup from S3Peter Hung1-64/+50
Serial ports of F81504/F81508/F81512 will failed when wakeup from S3(STR). It's due to when the system wakeup from S3(STR), this PCI device's configuration space from 0x40 to 0x40 + max_port * 0x08 should be re-configured. We move all initialization from pci_fintek_setup() to pci_fintek_init() and set it to pci_serial_quirks .init section. It's will re-init this device when system wakeup from pciserial_resume_ports(). Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10earlycon: 8250: Document kernel command line optionsPeter Hurley1-2/+3
Document the expected behavior of kernel command lines of the forms: console=uart[8250],io|mmio|mmio32,<addr>[,options] console=uart[8250],<addr>[,options] and earlycon=uart[8250],io|mmio|mmio32,<addr>[,options] earlycon=uart[8250],<addr>[,options] Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10earlycon: 8250: Fix command line regressionPeter Hurley2-26/+24
Restore undocumented behavior of kernel command line parameters of the forms: console=uart[8250],io|mmio|mmio32,<addr>[,options] console=uart[8250],<addr>[,options] where 'options' have not been specified; in this case, the hardware is assumed to be initialized. Fixes: c7cef0a84912cab3c9df8 ("console: Add extensible console matching") Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-07Merge 4.0-rc7 into tty-nextGreg Kroah-Hartman2-0/+6
We want the fixes in here as well, also to help out with merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-31ttyFDC: Implement KGDB IO operations.James Hogan2-6/+179
Implement KGDB IO operations for MIPS Fast Debug Channel (FDC). This can be enabled via Kconfig, which also allows the channel number to be chosen. The magic sysrq hack is implemented in the TTY driver, detecting just ^C for the KGDB channel, and ^O followed by a letter for the FDC console channel. The KGDB operations are reasonably efficient thanks to the flush callback, with a 4 byte buffer being used in both directions to allow up to 4 bytes to be encoded per FDC word. Reading of data for KGDB will discard any data received on other channels, which clearly isn't ideal, but given that there is a single FIFO shared between channels we can't do much better. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: linux-mips@linux-mips.org Cc: kgdb-bugreport@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9147/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31MIPS, ttyFDC: Add early FDC console supportJames Hogan2-0/+33
Add support for early console of MIPS Fast Debug Channel (FDC) on channel 1 with a call very early from the MIPS setup_arch(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9145/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31TTY: Add MIPS EJTAG Fast Debug Channel TTY driverJames Hogan3-0/+1145
Add TTY driver and consoles for the MIPS EJTAG Fast Debug Channel (FDC), which is found on the per-CPU MIPS Common Device Mapped Memory (CDMM) bus. The FDC is a per-CPU device which is used to communicate with an EJTAG probe. RX and TX FIFOs exist, containing 32-bits of data and 4-bit channel numbers. 16 general data streams are implemented on this for TTY and console use by encoding up to 4 bytes on each 32-bit FDC word. The TTY devices are named e.g. /dev/ttyFDC3c2 for channel 2 of the FDC attached to logical CPU 3. These can be used for getting the kernel log, a login prompt, or as a GDB remote transport, all over EJTAG and without needing a serial port. It can have an interrupt to notify of when incoming data is available in the RX FIFO or when the TX FIFO is no longer full. The detection of this interrupt occurs in architecture / platform code, but it may be shared with the timer and/or performance counter interrupt. Due to the per-CPU nature of the hardware, all outgoing TTY data is written out from a kthread which is pinned to the appropriate CPU. The console is not bound to a specific CPU, so output will appear on the chosen channel on whichever CPU the code is executing on. Enable with e.g. console=fdc1 in kernel arguments. /dev/console is bound to the same channel on the boot CPU's FDC if it exists. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9146/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-26tty: serial: fsl_lpuart: clear receive flag on FIFO flushStefan Agner1-0/+3
When the receiver was enabled during startup, a character could have been in the FIFO when the UART get initially used. The driver configures the (receive) watermark level, and flushes the FIFO. However, the receive flag (RDRF) could still be set at that stage (as mentioned in the register description of UARTx_RWFIFO). This leads to an interrupt which won't be handled properly in interrupt mode: The receive interrupt function lpuart_rxint checks the FIFO count, which is 0 at that point (due to the flush during initialization). The problem does not manifest when using DMA to receive characters. Fix this situation by explicitly read the status register, which leads to clearing of the RDRF flag. Due to the flush just after the status flag read, a explicit data read is not to required. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: serial: fsl_lpuart: specify transmit FIFO sizeStefan Agner1-0/+2
Specify transmit FIFO size which might be different depending on LPUART instance. This makes sure uart_wait_until_sent in serial core getting called, which in turn waits and checks if the FIFO is really empty on shutdown by using the tx_empty callback. Without the call of this callback, the last several characters might not yet be transmitted when closing the serial port. This can be reproduced by simply using echo and redirect the output to a ttyLP device. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: samsung: Clear operation mode on UART shutdownJavier Martinez Canillas1-0/+1
Exynos serial ports operate either in a DMA-based or interrupt-based modes. In DMA-based mode, the UART generates a transfer data request and a Transmission (Tx) interrupt in interrupt-based mode. The Tx IRQ is only unmasked in interrupt-based mode and it was done in s3c24xx_serial_start_tx(). Commit ba019a3e2ad5 ("serial: samsung: remove redundant interrupt enabling") removed the IRQ enable on that function since it is enabled when the mode is set in enable_tx_pio(). The problem is that enable_tx_pio() is only called if the port mode has not been set before but the mode was not cleared on .shutdown(). So if the UART was shutdown and then started up again, the mode set will remain and the Tx IRQ won't be unmasked. This caused a hang on at least Exynos5250, Exynos5420 and Exynos5800 when the system is rebooted or powered off. Fixes: ba019a3e2ad5 ("serial: samsung: remove redundant interrupt enabling") Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: clean up the tty time logic a bitGreg Kroah-Hartman1-2/+8
We only care if anything other than the lower 3 bits of the tty has changed, so just check that way, which makes it a bit faster, and more obvious what is going on. Also, document this for future developers to understand why we did this. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
2015-03-26serial: 8250_dw: only get the clock rate in one placeHeikki Krogerus1-17/+13
The clock rate is requested from a property called "clock-frequency" in both dw8250_probe_of and dw8250_probe_acpi. Moving the requests to dw8250_probe. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: 8250_dw: remove useless ACPI ID checkHeikki Krogerus1-5/+0
Having ACPI handle does not mean the same as having ACPI identifier. The check is in any case useless, but having it prevents this driver from being used for example with multifunctional PCI devices, such as the newer Intel LPSS devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: 8250_pci: add Intel Tangier supportAndy Shevchenko1-0/+49
Intel Tangier contains 4 HSUART ports as found on Intel Edison board which are 8250 compatible. The patch adds necessary bits to the driver. Note that the HSU port0 is currently unavailable and thus not supported. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: 8250_pci: replace switch-case by formula for Intel MIDAndy Shevchenko1-44/+34
This patch replaces a switch-case by a formula using rational best approximation that does necessary calculations for intel_mid_set_termios(). Below is a list of the calculations done for all defined baud rates. Each line in a format: 1) nominator, 2) denominator, 3) prescaler, 4) Fuart, 5) port UART clock, 6) list of baud rates with DLAB values. 24 25 12 48000000 64000000 4000000(1) 49 50 14 49000000 56000000 3500000(1) 4 5 16 40000000 40000000 2500000(1) 16 25 16 32000000 32000000 500000(4),1000000(2),2000000(1) 24 25 16 48000000 48000000 1500000(2),3000000(1) 2304 3125 16 36864000 36864000 576000(4),1152000(2) 8192 15625 16 26214400 26214400 50(32768),200(8192) 9216 15625 16 29491200 29491200 1800(1024),57600(32),115200(16), 230400(8),460800(4),921600(2),1843200(1) 12288 15625 16 39321600 39321600 75(32768),150(16384),300(8192), 600(4096),1200(2048),2400(1024),4800(512), 9600(256),19200(128),38400(64) 45056 78125 16 28835840 28835840 110(16384) 274432 390625 16 35127296 35127296 134(16384) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: 8250_pci: replace switch-case by formulaAndy Shevchenko2-31/+10
This patch replaces a switch-case by a formula using rational best approximation that does necessary calculations for byt_set_termios(). Below is a list of the calculations done for all defined baud rates. Each line in a format: 1) numerator, 2) denominator, 3) prescaler, 4) Fuart, 5) port UART clock, 6) list of baud rates with DLAB values. 4 5 16 80000000 80000000 2500000(2) 14 25 16 56000000 56000000 3500000(1) 16 25 16 64000000 64000000 500000(8),1000000(4),2000000(2), 4000000(1) 24 25 16 96000000 96000000 1500000(4),3000000(2) 2180 3103 16 70254592 70254592 134(32768) 2304 3125 16 73728000 73728000 576000(8),1152000(4) 8192 15625 16 52428800 52428800 50(65536),200(16384) 9216 15625 16 58982400 58982400 1800(2048),57600(64),115200(32), 230400(16),460800(8),921600(4),1843200(2) 12288 15625 16 78643200 78643200 75(65536),150(32768),300(16384), 600(8192),1200(4096),2400(2048), 4800(1024),9600(512),19200(256),38400(128) 9893 17154 16 57671680 57671680 110(32768) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1Christophe Leroy3-3/+3
Two config options exist to define powerpc MPC8xx: * CONFIG_PPC_8xx * CONFIG_8xx In addition, CONFIG_PPC_8xx also defines CONFIG_CPM1 as communication co-processor arch/powerpc/platforms/Kconfig.cputype has contained the following comment about CONFIG_8xx item for some years: "# this is temp to handle compat with arch=ppc" It looks like not many places still have that old CONFIG_8xx used, so it is likely to be a good time to get rid of it completely ? Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: jsm: some off by one bugsDan Carpenter2-4/+4
"brd->nasync" amd "brd->maxports" are the same. They hold the number of filled out channels in the brd->channels[] array. These tests should be ">=" instead of ">" so that we don't read one element past the end. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: xuartps: Fix check in console_setup().Thomas Betker1-1/+1
cdns_uart_console_setup() checks port->mapbase != 0, but the port may not be initialized yet even if this condition is met [e.g., ioremap() may have failed]. Check port->membase != NULL instead, similar to cdns_early_console_setup(). Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: xuartps: Get rid of register access macros.Thomas Betker1-112/+118
Get rid of cdns_uart_readl() and cdns_uart_writel() and just call readl() and writel() directly. Most of the patch was created by search-and-replace (I had to convert a few lines manually, and break some lines longer than 80 columns): * s/cdns_uart_readl(/readl(port->membase + /g * s/cdns_uart_writel(\([^,]*\),/writel(\1, port->membase +/g Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: xuartps: Fix iobase use.Thomas Betker1-1/+0
cdns_uart_get_port() sets port->iobase = 1 to "mark port in use", but this "in use" condition is not checked anywhere else in the code. So remove the line, keeping port->iobase = 0 (which also makes more sense). Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: xuartps: Fix cdns_uart_port[] definition.Thomas Betker1-1/+1
The code assumes that the array cdns_uart_port[] has dimension CDNS_UART_NR_PORTS, so let us define it this way. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: xuartps: Fix register space size.Thomas Betker1-1/+1
The register space size is 0x1000, and this value [not 0xfff] should be provided to request_mem_region(), ioremap(), etc. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: of: set port iomem size from devicetreeMans Rullgard1-0/+1
Make the 8250 driver reserve exactly the mmio region specified in the devicetree. This prevents conflicts between UPIO_AU type UARTs and other devices mapped closer than the default size of 0x1000 (or 0x100 for RT2880). Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: 8250: allow specifying iomem size in addition to addressMans Rullgard1-0/+4
This adds a mapsize field to struct uart_port to be used in conjunction with mapbase. If set, it overrides whatever value serial8250_port_size() would otherwise report. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: 8250_dw: add support for AMD SOC CarrizoKen Xue1-0/+1
Add ACPI identifier for UART on AMD SOC Carrizo. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: constify of_device_id arrayFabian Frederick14-15/+15
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Timur Tabi <timur@tabi.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty/hvc_opal: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: sh-sci: Update calculation of timeout for DMANobuhiro Iwamatsu1-9/+31
The current calculation method in the case of 9600bps, rounding error occurs has become setting that occur timeout faster than the required time. When we use 9600bps, 32byte buffer, 10 bit (CS8) and 100 HZ, it becomes 3 jiffies (30msec). In fact it is necessary 33msec. This updates to the calculation that are not actually less than the value set by the rounding error. Also, this is nothing will be calculated value when there is no load. If there are a lot of case load, overrun error will occur immediately. This is by the buffer size to be calculated twice the DMA buffer, and add the change of setting a sufficient time-out value. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: sh-sci: Add overrun handling of SCIFA and SCIFBNobuhiro Iwamatsu1-12/+36
SCIFA and SCIFB can detect the overrun, but it does not support. This adds overrun handling of SCIFA and SCIFB. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 16:57:37 +0000