summaryrefslogtreecommitdiffstats
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2022-07-01tty: n_gsm: fix user open not possible at responder until initiator openDaniel Starke1-2/+29
After setting up the control channel on both sides the responder side may want to open a virtual tty to listen on until the initiator starts an application on a user channel. The current implementation allows the open() but no other operation, like termios. These fail with EINVAL. The responder sided application has no means to detect an open by the initiator sided application this way. And the initiator sided applications usually expect the responder sided application to listen on the user channel upon open. Set the user channel into half-open state on responder side once a user application opens the virtual tty to allow IO operations on it. Furthermore, keep the user channel constipated until the initiator side opens it to give the responder sided application the chance to detect the new connection and to avoid data loss if the responder sided application starts sending before the user channel is open. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURSTBiju Das1-1/+1
As per RZ/N1 peripheral user manual(r01uh0752ej0100-rzn1-peripheral.pdf) rev 1.0.0 Mar,2019, the value for 8_WORD_BURST is 4(b2,b1=2’b10). This patch fixes the macro as per the user manual. Fixes: aa63d786cea2 ("serial: 8250: dw: Add support for DMA flow controlling devices") Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220630083909.4294-1-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30vt: fix memory overlapping when deleting chars in the bufferYangxi Xiang1-1/+1
A memory overlapping copy occurs when deleting a long line. This memory overlapping copy can cause data corruption when scr_memcpyw is optimized to memcpy because memcpy does not ensure its behavior if the destination buffer overlaps with the source buffer. The line buffer is not always broken, because the memcpy utilizes the hardware acceleration, whose result is not deterministic. Fix this problem by using replacing the scr_memcpyw with scr_memmovew. Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition") Cc: stable <stable@kernel.org> Signed-off-by: Yangxi Xiang <xyangxi5@gmail.com> Link: https://lore.kernel.org/r/20220628093322.5688-1-xyangxi5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: mvebu-uart: correctly report configured baudrate valuePali Rohár1-12/+13
Functions tty_termios_encode_baud_rate() and uart_update_timeout() should be called with the baudrate value which was set to hardware. Linux then report exact values via ioctl(TCGETS2) to userspace. Change mvebu_uart_baud_rate_set() function to return baudrate value which was set to hardware and propagate this value to above mentioned functions. With this change userspace would see precise value in termios c_ospeed field. Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate") Cc: stable <stable@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20220628100922.10717-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250: Fix PM usage_count for console handoverIlpo Järvinen2-5/+4
When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because 82586a721595 ("PM: runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously). Fixes: bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console") Cc: stable <stable@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/b4f428e9-491f-daf2-2232-819928dc276e@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250: fix return error code in serial8250_request_std_resource()Yi Yang1-1/+3
If port->mapbase = NULL in serial8250_request_std_resource() , it need return a error code instead of 0. If uart_set_info() fail to request new regions by serial8250_request_std_resource() but the return value of serial8250_request_std_resource() is 0, The system incorrectly considers that the resource application is successful and does not attempt to restore the old setting. A null pointer reference is triggered when the port resource is later invoked. Signed-off-by: Yi Yang <yiyang13@huawei.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220628083515.64138-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: stm32: Clear prev values before setting RTS delaysIlpo Järvinen1-0/+2
The code lacks clearing of previous DEAT/DEDT values. Thus, changing values on the fly results in garbage delays tending towards the maximum value as more and more bits are ORed together. (Leaving RS485 mode would have cleared the old values though). Fixes: 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode") Cc: stable <stable@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220627150753.34510-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250_dw: Use dw8250_serial_out() in dw8250_serial_out38x()Ilpo Järvinen1-12/+6
Place dw8250_serial_out() before dw8250_serial_out38x() so that it can be called from dw8250_serial_out38x() to do the actual write. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220628134234.53771-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-308250_dwlib: Convert bitops to newer formIlpo Järvinen1-13/+13
Instead of open-coding, use BIT(), GENMASK(), and FIELD_GET() helpers. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220630100536.41329-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250_dw: Drop PM ifdefferyAndy Shevchenko1-7/+3
Drop CONFIG_PM and CONFIG_PM_SLEEP ifdeffery while converting dw8250_pm_ops to use new PM macros. Since we are using runtime PM, wrap dw8250_pm_ops into pm_ptr(). Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220630100507.31113-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250_dw: Sort headers alphabeticallyAndy Shevchenko1-8/+9
For the sake of better maintenance, sort included headers alphabetically. While at it, split the serial group of headers which makes clear the subsystem the driver belongs to. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220630093816.28271-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30earlycon: prevent multiple register_console()Michael Walle1-0/+3
If the earlycon parameter is given twice, the kernel will spit out a WARN() in register_console() because it was already registered. The non-dt variant setup_earlycon() already handles that gracefully. The dt variant of_setup_earlycon() doesn't. Add the check there and add the -EALREADY handling in early_init_dt_scan_chosen_stdout(). FWIW, this doesn't happen if CONFIG_ACPI_SPCR_TABLE is set. In that case the registration is delayed until after earlycon parameter(s) are parsed. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220628120705.200617-1-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250_dw: Take port lock while accessing LSRIlpo Järvinen1-0/+3
Accessing LSR requires port lock because it mutates lsr_saved_flags in serial_lsr_in(). Fixes: 197eb5c416ff ("serial: 8250_dw: Use serial_lsr_in() in dw8250_handle_irq()") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/c5879db7-bee9-93f-526e-872a292442@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250_port: Fix spelling mistakeZhang Jiaming1-2/+2
Change 'timeing' to 'timing'. Change 'Characteres' to 'Characters'. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Link: https://lore.kernel.org/r/20220629094411.39066-1-jiaming@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30tty: serial: samsung_tty: loopback mode supportChanho Park1-0/+8
Internal loopback mode can be supported by setting UCON register's Loopback Mode bit. The mode & bit can be supported since s3c2410 and later SoCs. The prefix of LOOPBACK / BIT(5) naming should be also changed to S3C2410_ in order to avoid confusion. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220629004141.51484-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30tty: serial: samsung_tty: support more than 4 uart portsChanho Park1-57/+25
Regarding Exynos Auto v9 SoC, it supports uarts up to 12. However, the maximum number of the ports has been derived from CONFIG_SERIAL_SAMSUNG_UARTS and tightly coupled with the config for previous Samsung SoCs such as s3c24xx and s3c64xx. To overcome this limitation, this changes the usage of the definition to UART_NR which is widely used from other serial drivers. This also defines the value to 12 only for ARM64 SoCs to not affect the change to previous arm32 SoCs. Instead of enumerating all the ports as predefined arrays, this introduces s3c24xx_serial_init_port_default that is initializing the structure as the default value. Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220629005538.60132-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: Fix __stop_tx() & DMA Tx restart racesIlpo Järvinen2-4/+4
Commit e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") changed __dma_tx_complete() to enable THRI that is cleared in __stop_tx() once THRE is asserted as UART runs out bits to transmit. It is possible, however, that more data arrives in between in which case serial8250_tx_dma() resumes Tx. THRI is not supposed to be on during DMA Tx because DMA is based on completion handler, therefore THRI must be cleared unconditionally in serial8250_tx_dma(). When Tx is about to start, another race window exists with serial8250_handle_irq() leading to a call into __stop_tx() while the Tx has already been resumed: __tx_complete(): -> spin_lock(port->lock) -> dma->tx_running = 0 -> serial8250_set_THRI() -> spin_unlock(port->lock) uart_start(): serial8250_handle_irq(): -> spin_lock(port->lock) -> serial8250_tx_dma(): -> dma->tx_running = 1 -> spin_unlock(port->lock) -> spin_lock(port->lock) -> __stop_tx() Close this race by checking !dma->tx_running before calling into __stop_tx(). Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220615090651.15340-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottleIlpo Järvinen1-2/+21
The driver must provide throttle and unthrottle in uart_ops when it sets UPSTAT_AUTORTS. Add them using existing stop_rx & enable_interrupts functions. Fixes: 2a76fa283098 (serial: pl011: Adopt generic flag to store auto RTS status) Cc: stable <stable@kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Reported-by: Nuno Gonçalves <nunojpg@gmail.com> Tested-by: Nuno Gonçalves <nunojpg@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220614075637.8558-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: samsung_tty: set dma burst_size to 1Chanho Park1-3/+2
The src_maxburst and dst_maxburst have been changed to 1 but the settings of the UCON register aren't changed yet. They should be changed as well according to the dmaengine slave config. Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions") Cc: stable <stable@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: dw: enable using pdata with ACPIMarcin Wojtas1-12/+12
Commit ffd381445eac ("serial: 8250: dw: Move the USR register to pdata") caused NULL-pointer dereference when booting with ACPI by unconditional usage of the recently added pdata. In order to fix that and prevent similar issues in future, hook the default version of this structure in dw8250_acpi_match table. While at it, sort all entries alphabetically. Fixes: ffd381445eac ("serial: 8250: dw: Move the USR register to pdata") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20220620121046.1307412-1-mw@semihalf.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250_dwlib: Support for 9th bit multipoint addressingIlpo Järvinen1-1/+101
Add 9th bit multipoint addressing mode for DW UART. 9th bit addressing can be used only when HW RS485 is available. Updating RAR (receive address register) is bit tricky because busy indication is not be available when DW UART is strictly 16550 compatible, which is the case with the hardware I was testing with. RAR should not be updated while receive is in progress which is now achieved by deasserting RE and waiting for one frame (in case rx would be in progress, the driver seems to have no way of knowing it w/o busy indication). Because of this complexity, it's better to avoid doing it unless really needed. Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Co-developed-by: Raymond Tan <raymond.tan@intel.com> Co-developed-by: Lakshmi Sowjanya <lakshmi.sowjanya.d@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Lakshmi Sowjanya <lakshmi.sowjanya.d@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: Support for RS-485 multipoint addressesIlpo Järvinen2-1/+25
Add support for RS-485 multipoint addressing using 9th bit [*]. The addressing mode is configured through ->rs485_config(). ADDRB in termios indicates 9th bit addressing mode is enabled. In this mode, 9th bit is used to indicate an address (byte) within the communication line. ADDRB can only be enabled/disabled through ->rs485_config() that is also responsible for setting the destination and receiver (filter) addresses. Add traps to detect unwanted changes to struct serial_rs485 layout using static_assert(). [*] Technically, RS485 is just an electronic spec and does not itself specify the 9th bit addressing mode but 9th bit seems at least "semi-standard" way to do addressing with RS485. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: take termios_rwsem for ->rs485_config() & pass termios as paramIlpo Järvinen18-25/+37
To be able to alter ADDRB within ->rs485_config(), take termios_rwsem before calling ->rs485_config() and pass termios. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250_lpss: Use 32-bit readsIlpo Järvinen1-1/+1
Use 32-bit reads in order to not lose higher bits of DW UART regs. This change does not fix any known issue as the high bits are not used for anything related to 8250 driver (dw8250_readl_ext and dw8250_writel_ext used within the dwlib are already doing readl/writel/ioread32be/iowrite32be anyway). This change is necessary to enables 9th bit address mode. DW UART reports address frames with BIT(8) of LSR. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: create lsr_save_maskIlpo Järvinen3-2/+6
Allow drivers to alter LSR save mask. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: make saved LSR largerIlpo Järvinen6-17/+17
DW flags address received as BIT(8) in LSR. In order to not lose that on read, enlarge lsr_saved_flags to u16. Adjust lsr/status variables and related call chains to use u16. Technically, some of these type conversion would not be needed but it doesn't hurt to be consistent. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: Consolidate BOTH_EMPTY useIlpo Järvinen7-27/+16
Per file BOTH_EMPTY defines are littering our source code here and there. Define once in serial.h and create helper for the check too. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: Convert SERIAL_XMIT_SIZE to UART_XMIT_SIZEIlpo Järvinen5-13/+13
Both UART_XMIT_SIZE and SERIAL_XMIT_SIZE are defined. Make them all UART_XMIT_SIZE. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: Use C99 array initializer & define UART_REG_UNMAPPEDIlpo Järvinen1-18/+20
Use C99 array initializer insteads of comments and make unmapped checks more obvious. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: msm: Rename UART_* defines to MSM_UART_*Ilpo Järvinen1-251/+250
Using UART_* to name defines is a bit problematic. When trying to do unrelated cleanup which also involved tweaking header inclusion logic, caused UART_CSR from serial_reg.h to leak into msm's namespace which is also among msm defines. Thus, rename all UART_* ones to MSM_UART_* to eliminate possibility of collisions. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: msm: Convert container_of UART_TO_MSM to static inlineIlpo Järvinen1-23/+26
Create static inline instead of define as it provides type safety and is safer wrt. macros expansion. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: st-asc: remove include of pm_runtime.hClaudiu Beznea1-1/+0
st-asc driver doesn't use helpers from pm_runtime.h thus remove its include. Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616140024.2081238-5-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: atmel: remove enable/disable clock due to atmel_console_setup()Claudiu Beznea1-16/+0
There is no need for clk_prepare_enable() at the beginning of atmel_console_setup() and clk_disable_unprepare() at the end of atmel_console_setup() as the clock is already enabled when calling atmel_console_setup() and its disablement is done at the end of probe. Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616140024.2081238-4-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: atmel: use devm_clk_get()Claudiu Beznea1-35/+15
Use devm_clk_get() for serial clock instead of clk_get()/clk_put(). With this move the clk_get in driver's probe function. Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616140024.2081238-3-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: atmel: stop using legacy pm opsClaudiu Beznea1-17/+11
Stop using legacy PM ops and switch using dev_pm_ops. Along with it #ifdef CONFIG_PM are removed and __maybe_unused and pm_ptr() used instead. Coding style recommends (at chapter Conditional Compilation) to avoid using preprocessor conditional and use __maybe_unused instead. Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616140024.2081238-2-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: kgdboc: Fix typo in commentXiang wangx1-1/+1
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220620104653.5451-1-wangxiang@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: Fix refcount leak bug in ucc_uart.cLiang He1-0/+2
In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27drivers: tty: serial: Add missing of_node_put() in serial-tegra.cLiang He1-0/+1
In tegra_uart_init(), of_find_matching_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220615111747.3963930-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: Drop timeout from uart_portIlpo Järvinen2-21/+10
Since commit 31f6bd7fad3b ("serial: Store character timing information to uart_port"), per frame timing information is available on uart_port. Uart port's timeout can be derived from frame_time by multiplying with fifosize. Most callers of uart_poll_timeout are not made under port's lock. To be on the safe side, make sure frame_time is only accessed once. As fifo_size is effectively a constant, it shouldn't cause any issues. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220613113905.22962-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250_pericom: Use UART_LCR_DLABIlpo Järvinen1-1/+1
Use UART_LCR_DLAB instead of literal. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220613075736.12283-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: Use UART_LCR_WLEN8 instead of literalIlpo Järvinen1-1/+1
Use UART_LCR_WLEN8 instead of literal 0x03 in size_fifo(). Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220613075736.12283-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: sifive: Remove useless license text when SPDX-License-Identifier is ↵Christophe JAILLET1-10/+0
already used An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/dbc54eff6f4e077d9126054f395d5bc5b3405917.1654936915.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: use E_TABSZ for the translations sizeJiri Slaby1-1/+1
The code expects "translations" to have 256 (E_TABSZ) values. Use the macro instead of the constant to be explicit about this. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: remove dflt reset from con_do_clear_unimap()Jiri Slaby1-2/+0
con_do_clear_unimap() sets dflt to NULL and then calls con_release_unimap() which does the very same as the first thing. So remove the former as it is apparently superfluous. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: improve UNI_*() macros definitionsJiri Slaby1-4/+13
Use FIELD_GET() and GENMASK() helpers instead of direct shifts and ANDs. This makes the code even more obvious. I didn't know about the helpers at the time of writing the macros. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: rename struct vc_data::vc_uni_pagedir*Jiri Slaby2-27/+27
As a follow-up to the commit 4173f018aae1 (tty/vt: consolemap: rename and document struct uni_pagedir), rename also the members of struct vc_data. I.e. pagedir -> pagedict. And while touching all the places, remove also the unnecessary vc_ prefix. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: saner variable names in set_inverse_transl()Jiri Slaby1-13/+13
The function uses too vague variable names like i, j, k for iterators, p, q, p1, p2 for pointers etc. Rename all these, so that it is clear what is going on: - dict: for dictionaries. - d, r, g: for dir, row, glyph iterators -- these are unsigned now. - dir, row: for directory and row pointers. - glyph: for the glyph. - and so on... This is a lot of shuffling, but the result pays off, IMO. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: saner variable names in set_inverse_trans_unicode()Jiri Slaby1-5/+5
The function still uses too vague parameter name after commit 50c92a1b2d50 (tty/vt: consolemap: saner variable names in set_inverse_trans_unicode()). So use "dict" instead of "p" for that parameter too. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: remove unused parameter from set_inverse_trans_unicode()Jiri Slaby1-5/+4
conp is unused in set_inverse_trans_unicode(), remove it. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: use ARRAY_SIZE(), part II.Jiri Slaby1-2/+2
The code still uses constants (macros) as bounds in loops after commit 17945d317a52 (tty/vt: consolemap: use ARRAY_SIZE()). The contants are at least macros used also in the definition of the arrays. But use ARRAY_SIZE() on two more places to ensure the loops never run out of bounds even if the array definition change. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-25 07:52:43 +0000