summaryrefslogtreecommitdiffstats
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2011-11-06Merge branch 'next' of ↵Linus Torvalds6-28/+439
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/p3060qds: Add support for P3060QDS board powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX powerpc/85xx: Make kexec to interate over online cpus powerpc/fsl_booke: Fix comment in head_fsl_booke.S powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver powerpc/86xx: Correct Gianfar support for GE boards powerpc/cpm: Clear muram before it is in use. drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager powerpc/fsl_msi: add support for "msi-address-64" property powerpc/85xx: Setup secondary cores PIR with hard SMP id powerpc/fsl-booke: Fix settlbcam for 64-bit powerpc/85xx: Adding DCSR node to dtsi device trees powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards powerpc/85xx: fix PHYS_64BIT selection for P1022DS powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map powerpc: respect mem= setting for early memory limit setup powerpc: Update corenet64_smp_defconfig powerpc: Update mpc85xx/corenet 32-bit defconfigs ... Fix up trivial conflicts in: - arch/powerpc/configs/40x/hcu4_defconfig removed stale file, edited elsewhere - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c: added opal and gelic drivers vs added ePAPR driver - drivers/tty/serial/8250.c moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-04Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-17/+8
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-02Merge branch 'for-linus' of git://github.com/richardweinberger/linuxLinus Torvalds1-1/+1
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits) um: fix ubd cow size um: Fix kmalloc argument order in um/vdso/vma.c um: switch to use of drivers/Kconfig UserModeLinux-HOWTO.txt: fix a typo UserModeLinux-HOWTO.txt: remove ^H characters um: we need sys/user.h only on i386 um: merge delay_{32,64}.c um: distribute exports to where exported stuff is defined um: kill system-um.h um: generic ftrace.h will do... um: segment.h is x86-only and needed only there um: asm/pda.h is not needed anymore um: hw_irq.h can go generic as well um: switch to generic-y um: clean Kconfig up a bit um: a couple of missing dependencies... um: kill useless argument of free_chan() and free_one_chan() um: unify ptrace_user.h um: unify KSTK_... um: fix gcov build breakage ...
2011-11-02um: switch to use of drivers/KconfigAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-01Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-10/+20
* 'next/dt' of git://git.linaro.org/people/arnd/arm-soc: ARM: gic: use module.h instead of export.h ARM: gic: fix irq_alloc_descs handling for sparse irq ARM: gic: add OF based initialization ARM: gic: add irq_domain support irq: support domains with non-zero hwirq base of/irq: introduce of_irq_init ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support ARM: at91: dt: at91sam9g45 family and board device tree files arm/mx5: add device tree support for imx51 babbage arm/mx5: add device tree support for imx53 boards ARM: msm: Add devicetree support for msm8660-surf msm_serial: Add devicetree support msm_serial: Use relative resources for iomem Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}
2011-10-30Merge branches 'msm/dt', 'imx/dt' and 'at91/dt' into next/dtArnd Bergmann3-14/+65
2011-10-29Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-11/+1
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: drivercore: Add helper macro for platform_driver boilerplate spi: irq: Remove IRQF_DISABLED OMAP: SPI: Fix the trying to free nonexistent resource error spi/spi-ep93xx: add module.h include spi/tegra: fix compilation error in spi-tegra.c spi: spi-dw: fix all sparse warnings spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate spi/spi-pl022: Don't allocate more sg than required. spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet spi/spi-pl022: Resolve formatting issues
2011-10-27Merge branch 'clk' of ↵Linus Torvalds2-2/+26
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7131/1: clkdev: Add Common Macro for clk_lookup clk: spi-pl022: convert to clk_prepare()/clk_unprepare() clk: timer-sp: convert to clk_prepare()/clk_unprepare() clk: sa1111: convert to clk_prepare()/clk_unprepare() clk: mmci: convert to clk_prepare()/clk_unprepare() clk: amba-pl011: convert to clk_prepare()/clk_unprepare() clk: amba-pl010: convert to clk_prepare()/clk_unprepare() clk: amba-clcd: convert to clk_prepare()/clk_unprepare() clk: amba bus: convert to clk_prepare()/clk_unprepare() clk: provide prepare/unprepare functions
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds1-1/+1
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-27Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds4-13/+11
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: of_mdio: Don't phy_scan_fixups() twice Devicetree: Expand on ARM Primecell binding documentation dt: Add empty of_match_node() macro dt: add empty dt helpers for non-dt build devicetree: fix build error on drivers/tty/serial/altera_jtaguart.c devicetree: Add ARM pl022 spi controller binding doc devicetree: Add ARM pl061 gpio controller binding doc of/irq: of_irq_find_parent: check for parent equal to child MAINTAINERS: update devicetree maintainers dt: add helper to read 64-bit integers tty: use of_match_ptr() for of_match_table entry OF: Add of_match_ptr() macro dt: add empty for_each_child_of_node, of_find_property devicetree: Document Qualcomm and Atmel prefixes serial/imx: add of_alias_get_id() reference back dt: add of_alias_scan and of_alias_get_id devicetree: Add a registry of vendor prefixes
2011-10-26Merge branch 'tty-next' of ↵Linus Torvalds76-3556/+1848
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) TTY: serial_core: Fix crash if DCD drop during suspend tty/serial: atmel_serial: bootconsole removed from auto-enumerates Revert "TTY: call tty_driver_lookup_tty unconditionally" tty/serial: atmel_serial: add device tree support tty/serial: atmel_serial: auto-enumerate ports tty/serial: atmel_serial: whitespace and braces modifications tty/serial: atmel_serial: change platform_data variable name tty/serial: RS485 bindings for device tree TTY: call tty_driver_lookup_tty unconditionally TTY: pty, release tty in all ptmx_open fail paths TTY: make tty_add_file non-failing TTY: drop driver reference in tty_open fail path 8250_pci: Fix kernel panic when pch_uart is disabled h8300: drivers/serial/Kconfig was moved parport_pc: release IO region properly if unsupported ITE887x card is found tty: Support compat_ioctl get/set termios_locked hvc_console: display printk messages on console. TTY: snyclinkmp: forever loop in tx_load_dma_buffer() tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case) ... Fix up Conflicts in: - drivers/tty/serial/8250_pci.c Trivial conflict with removed duplicate device ID - drivers/tty/serial/atmel_serial.c Annoying silly conflict between "specify the port num via platform_data" and other changes to atmel_console_init
2011-10-25Merge branch 'pm-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) PM / Clocks: Remove redundant NULL checks before kfree() PM / Documentation: Update docs about suspend and CPU hotplug ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist. ARM: mach-shmobile: sh7372 A4R support (v4) ARM: mach-shmobile: sh7372 A3SP support (v4) PM / Sleep: Mark devices involved in wakeup signaling during suspend PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image PM / Hibernate: Do not initialize static and extern variables to 0 PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too PM / Hibernate: Add resumedelay kernel param in addition to resumewait MAINTAINERS: Update linux-pm list address PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs PM / Hibernate: Add resumewait param to support MMC-like devices as resume file PM / Hibernate: Fix typo in a kerneldoc comment PM / Hibernate: Freeze kernel threads after preallocating memory PM: Update the policy on default wakeup settings PM / VT: Cleanup #if defined uglyness and fix compile error PM / Suspend: Off by one in pm_suspend() PM / Hibernate: Include storage keys in hibernation image on s390 ...
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-25drivercore: Add helper macro for platform_driver boilerplateGrant Likely1-11/+1
For simple modules that contain a single platform_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_platform_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-10-24Merge commit 'v3.1' into devicetree/nextGrant Likely1-1/+3
2011-10-19TTY: serial_core: Fix crash if DCD drop during suspendDoug Anderson1-0/+7
This crash was showing up 100% of the time on Tegra CPUs when an agetty was running on the serial port and the console was not running on the serial port. The reason the Tegra saw it so reliably is that the Tegra CPU internally ties DTR to DCD/DSR. That means when we dropped DTR during suspend we would get always get an immediate DCD drop. The specific order of operations that were running: * uart_suspend_port() would be called to put the uart in suspend mode * we'd drop DTR (ops->set_mctrl(uport, 0)). * the DTR drop would be looped back in the CPU to be a DCD drop. * the DCD drop would look to the serial driver as a hangup * the hangup would call uart_shutdown() * ... suspend / resume happens ... * uart_resume_port() would be called and run the code in the (port->flags & ASYNC_SUSPENDED) block, which would startup the port (and enable tx again). * Since the UART would be available for tx, we'd immediately get an interrupt, eventually calling transmit_chars() * The transmit_chars() function would crash. The first crash would be a dereference of a NULL tty member, but since the port has been shutdown that was just a symptom. I have proposed a patch that would fix the Tegra CPUs here (see https://lkml.org/lkml/2011/10/11/444 - tty/serial: Prevent drop of DCD on suspend for Tegra UARTs). However, even with that fix it is still possible for systems that have an externally visible DCD line to see a crash if the DCD drops at just the right time during suspend: thus this patch is still useful. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-19tty/serial: atmel_serial: bootconsole removed from auto-enumeratesNicolas Ferre1-1/+0
Auto-enumerate mechanism conflicts with bootconsoles: remove the usage counter for this type of consoles. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-19Revert "TTY: call tty_driver_lookup_tty unconditionally"Greg Kroah-Hartman1-9/+12
This reverts commit 631180aca723cb92e128fdac5fd144e913ca84e5. It caused problems when /dev/tty is a pty: https://lkml.org/lkml/2011/10/12/401 Cc: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty/serial: atmel_serial: add device tree supportNicolas Ferre1-8/+71
Will use aliases to enumerate ports, if available. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty/serial: atmel_serial: auto-enumerate portsNicolas Ferre1-8/+36
If no platform data provided to enumerate ports, use a bit field to choose port number and check if port is already initialized. Use this mechanism for both console and plain serial ports. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty/serial: atmel_serial: whitespace and braces modificationsNicolas Ferre1-4/+5
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty/serial: atmel_serial: change platform_data variable nameNicolas Ferre1-7/+7
Easier to follow if platform_data name is pdata. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18TTY: call tty_driver_lookup_tty unconditionallyJiri Slaby1-12/+9
Commit 4a2b5fddd5 (Move tty lookup/reopen to caller) made the call to tty_driver_lookup_tty conditional in tty_open. It doesn't look like it was an intention. Or if it was, it was not documented in the changelog and the code now looks weird. For example there would be no need to remember the tty driver and tty index. Further the condition depends on a tty which we drop a reference of already. If I'm looking correctly, this should not matter thanks to the locking currently done there. Thus, tty_driver->ttys[idx] cannot change under our hands. But anyway, it makes sense to change that to the old behaviour. Introduced-in: v2.6.28-rc2 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18TTY: pty, release tty in all ptmx_open fail pathsJiri Slaby1-5/+5
Mistakenly, commit 64ba3dc3143d (tty: never hold BTM while getting tty_mutex) switched one fail path in ptmx_open to not free the newly allocated tty. Fix that by jumping to the appropriate place. And rename the labels so that it's clear what is going on there. Introduced-in: v2.6.36-rc2 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18TTY: make tty_add_file non-failingJiri Slaby2-17/+46
If tty_add_file fails at the point it is now, we have to revert all the changes we did to the tty. It means either decrease all refcounts if this was a tty reopen or delete the tty if it was newly allocated. There was a try to fix this in v3.0-rc2 using tty_release in 0259894c7 (TTY: fix fail path in tty_open). But instead it introduced a NULL dereference. It's because tty_release dereferences filp->private_data, but that one is set even in our tty_add_file. And when tty_add_file fails, it's still NULL/garbage. Hence tty_release cannot be called there. To circumvent the original leak (and the current NULL deref) we split tty_add_file into two functions, making the latter non-failing. In that case we may do the former early in open, where handling failures is easy. The latter stays as it is now. So there is no change in functionality. The original bug (leak) was introduced by f573bd176 (tty: Remove __GFP_NOFAIL from tty_add_file()). Thanks Dan for reporting this. Later, we may split tty_release into more functions and call only some of them in this fail path instead. (If at all possible.) Introduced-in: v2.6.37-rc2 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18TTY: drop driver reference in tty_open fail pathJiri Slaby1-0/+1
When tty_driver_lookup_tty fails in tty_open, we forget to drop a reference to the tty driver. This was added by commit 4a2b5fddd5 (Move tty lookup/reopen to caller). Fix that by adding tty_driver_kref_put to the fail path. I will refactor the code later. This is for the ease of backporting to stable. Introduced-in: v2.6.28-rc2 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-188250_pci: Fix kernel panic when pch_uart is disabledTomoya MORINAGA1-0/+10
Currently, ".setup" function is not set. As a result, when detecting our IOH's uart device without pch_uart, kernel panic occurs at the following of pciserial_init_ports(). for (i = 0; i < nr_ports; i++) { if (quirk->setup(priv, board, &serial_port, i)) break; So, this patch adds the ".setup" function. We can use pci_default_setup because our IOH's uart is compatible with 16550. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty: Support compat_ioctl get/set termios_lockedThomas Meyer2-0/+19
When running a Fedora 15 (x86) on an x86_64 kernel, in the boot process plymouthd complains about those two missing ioctls: [ 2.581783] ioctl32(plymouthd:186): Unknown cmd fd(10) cmd(00005457){t:'T';sz:0} arg(ffb6a5d0) on /dev/tty1 [ 2.581803] ioctl32(plymouthd:186): Unknown cmd fd(10) cmd(00005456){t:'T';sz:0} arg(ffb6a680) on /dev/tty1 both ioctl functions work on the 'struct termios' resp. 'struct termios2', which has the same size (36 bytes resp. 44 bytes) on x86 and x86_64, so it's just a matter of converting the pointer from userland. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18hvc_console: display printk messages on console.Miche Baker-Harvey1-1/+6
printk only works for "registered consoles." Currently, the hvc_console code calls register_console() from hvc_instantiate(), but that's only used in the early console case. In hvc_alloc(), register_console() was not called. Add a call to register_console() in hvc_alloc(), set up the index in the hvc_console, and set up the necessary vtermnos[] and cons_op[] entries so that printk functions work. Signed-off-by: Miche Baker-Harvey <miche@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-16PM / VT: Cleanup #if defined uglyness and fix compile errorH Hartley Sweeten1-0/+4
Introduce the config option CONFIG_VT_CONSOLE_SLEEP in order to cleanup the #if defined ugliness for the vt suspend support functions. Note that CONFIG_VT_CONSOLE is already dependant on CONFIG_VT. The function pm_set_vt_switch is actually dependant on CONFIG_VT and not CONFIG_PM_SLEEP. This fixes a compile error when CONFIG_PM_SLEEP is not set: drivers/tty/vt/vt_ioctl.c:1794: error: redefinition of 'pm_set_vt_switch' include/linux/suspend.h:17: error: previous definition of 'pm_set_vt_switch' was here Also, remove the incorrect path from the comment in console.c. [rjw: Replaced #if defined() with #ifdef in suspend.h.] Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-13tty: drop superfluous dependency in KconfigPaul Bolle1-1/+1
HW_CONSOLE doesn't need to depend on both VT and !S390 as VT already depends on !S390. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-10Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds1-1/+3
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (29 commits) MIPS: Call oops_enter, oops_exit in die staging/octeon: Software should check the checksum of no tcp/udp packets MIPS: Octeon: Enable C0_UserLocal probing. MIPS: No branches in delay slots for huge pages in handle_tlbl MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTC MIPS: Octeon: Select CONFIG_HOLES_IN_ZONE MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2) MIPS: Compat: Use 32-bit wrapper for compat_sys_futex. MIPS: Do not use EXTRA_CFLAGS MIPS: Alchemy: DB1200: Disable cascade IRQ in handler SERIAL: Lantiq: Set timeout in uart_port MIPS: Lantiq: Fix setting the PCI bus speed on AR9 MIPS: Lantiq: Fix external interrupt sources MIPS: tlbex: Fix build error in R3000 code. MIPS: Alchemy: Include Au1100 in PM code. MIPS: Alchemy: Fix typo in MAC0 registration MIPS: MSP71xx: Fix build error. MIPS: Handle __put_user() sleeping. MIPS: Allow forced irq threading MIPS: i8259: Mark cascade interrupt non-threaded ...
2011-10-05devicetree: fix build error on drivers/tty/serial/altera_jtaguart.cGrant Likely1-0/+1
This patch fixes the following build error caused by commit 85888069cf5d ("tty: use of_match_ptr() for of_match_table entry"). The problem was a missing #include <linux/of.h> which is where of_match_ptr() is defined. drivers/tty/serial/altera_jtaguart.c:483:3: error: implicit declaration of function 'of_match_ptr' [-Werror=implicit-function-declaration] drivers/tty/serial/altera_jtaguart.c:483:34: error: 'altera_jtaguart_match' undeclared here (not in a function) Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Tobias Klauser <tklauser@distanz.ch> (maintainer:ALTERA UART/JTAG...) Cc: Alan Cox <alan@linux.intel.com> (maintainer:SERIAL DRIVERS)
2011-10-05Merge branch 'for-grant' of git://git.jdl.com/software/linux-3.0 into ↵Grant Likely1-2/+2
devicetree/next
2011-09-29tty: use of_match_ptr() for of_match_table entryBen Dooks3-9/+3
Use the new of_match_ptr() macro for the of_match_table pointer entry to avoid having to #dfine match NULL Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-09-29TTY: snyclinkmp: forever loop in tx_load_dma_buffer()Dan Carpenter1-3/+3
My main concern here was the line that said: copy_count = min_t(unsigned short,count,SCABUFSIZE); "count" is an unsigned int here so the cast to unsigned short truncates the upper bits. So if count is 0x10000 then copy_count is 0 and the loop never exits. "count" comes from skb->len in hdlcdev_xmit(). The other min_t() changes are just cleanups. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-27clk: amba-pl011: convert to clk_prepare()/clk_unprepare()Russell King1-1/+13
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27clk: amba-pl010: convert to clk_prepare()/clk_unprepare()Russell King1-1/+13
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-26tty/n_gsm: avoid fifo overflow in gsm_dlci_data_outputMikhail Kshevetskiy1-27/+31
n_gsm use a simple approach: every writing to fifo correspond exactly one reading from fifo. There are no problem in this approach until we read less bytes then we write. As result fifo may owerflow. This leads to packet loss and very slow responce. For example, this happens with ping packets (about 96 byte each) and default gsm->mtu = 64. As result we get 50 sec ping timeout and 20% packet loss. Fix the problem by reading and sending all data from the fifo Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case)Mikhail Kshevetskiy1-2/+1
in adaption=2 case we should put 1 or 2 byte with modem status bits at the beginning of a buffer pointed by "dp". n_gsm use 1 byte case, so it allocate a buffer of len + 1 size. As result we should: * put 1 byte of modem status bits * increase data pointer * put "len" bytes of data but actually we have: * increase first byte with the value of modem status bits * decrease "len" * put orig_len - 1 bytes of data starting from the buffer beggining This is evidently wrong. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-268250: ratelimit LSR safety check engaged warning.Konrad Rzeszutek Wilk1-2/+2
On my BIOSTAR TA890FXE the ttyS0 ends up spewing: [904682.485933] ttyS0: LSR safety check engaged! [904692.505895] ttyS0: LSR safety check engaged! [904702.525972] ttyS0: LSR safety check engaged! [904712.545967] ttyS0: LSR safety check engaged! [904722.566125] ttyS0: LSR safety check engaged! .. lets limit it so it won't be the only thing visible in the ring buffer. CC: Alan Cox <alan@linux.intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26tty/n_gsm: fix bug in tiocmsetNikola Diklic-Perin1-1/+1
Clear bitmask was not inverted before masking modem_tx. Calling ioctl(fd, TIOCMBIC, TIOCM_RTS) results in: [ 197.430000] pre_modem_tx: 0x00000006 [ 197.430000] clear: 0x00000004 [ 197.430000] set: 0x00000000 [ 197.440000] post_modem_tx: 0x00000004 which is wrong. Signed-off-by: Nikola Diklic-Perin <diklic.perin.nikola@gmail.com> Acked-by: Alan Cox <alan@linx.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26drivers/tty: don't use the byte channel handle as a parameter in ehv_bytechan.cTimur Tabi1-5/+2
The ePAPR hypervisor byte channel console driver only supports one byte channel as a console, and the byte channel handle is stored in a global variable. It doesn't make any sense to pass that handle as a parameter to the console functions, since these functions already have access to the global variable. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22TTY: irq: Remove IRQF_DISABLEDYong Zhang19-35/+35
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22serial-core: power up uart port early before we do set_termios when resumingNing Jiang1-0/+2
The following patch removed uart_change_pm() in uart_resume_port(): commit 5933a161abcb8d83a2c145177f48027c3c0a8995 Author: Yin Kangkai <kangkai.yin@linux.intel.com> serial-core: reset the console speed on resume It will break the pxa serial driver when the system resumes from suspend mode as it will try to set baud rate divider register in set_termios but with clock off. The register value can not be set correctly on some platform if the clock is disabled. The pxa driver will check the value and report the following warning: ------------[ cut here ]------------ WARNING: at drivers/tty/serial/pxa.c:545 serial_pxa_set_termios+0x1dc/0x250() Modules linked in: [<c0281f30>] (unwind_backtrace+0x0/0xf0) from [<c029341c>] (warn_slowpath_common+0x4c/0x64) [<c029341c>] (warn_slowpath_common+0x4c/0x64) from [<c029344c>] (warn_slowpath_null+0x18/0x1c) [<c029344c>] (warn_slowpath_null+0x18/0x1c) from [<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250) [<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250) from [<c044a840>] (uart_resume_port+0x128/0x2dc) [<c044a840>] (uart_resume_port+0x128/0x2dc) from [<c044bbe0>] (serial_pxa_resume+0x18/0x24) [<c044bbe0>] (serial_pxa_resume+0x18/0x24) from [<c0454d34>] (platform_pm_resume+0x40/0x4c) [<c0454d34>] (platform_pm_resume+0x40/0x4c) from [<c0457ebc>] (pm_op+0x68/0xb4) [<c0457ebc>] (pm_op+0x68/0xb4) from [<c0458368>] (device_resume+0xb0/0xec) [<c0458368>] (device_resume+0xb0/0xec) from [<c04584c8>] (dpm_resume+0xe0/0x194) [<c04584c8>] (dpm_resume+0xe0/0x194) from [<c0458588>] (dpm_resume_end+0xc/0x18) [<c0458588>] (dpm_resume_end+0xc/0x18) from [<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac) [<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac) from [<c02c5278>] (enter_state+0xac/0xdc) [<c02c5278>] (enter_state+0xac/0xdc) from [<c02c48ec>] (state_store+0xa0/0xbc) [<c02c48ec>] (state_store+0xa0/0xbc) from [<c0408f7c>] (kobj_attr_store+0x18/0x1c) [<c0408f7c>] (kobj_attr_store+0x18/0x1c) from [<c034a6a4>] (sysfs_write_file+0x108/0x140) [<c034a6a4>] (sysfs_write_file+0x108/0x140) from [<c02fb798>] (vfs_write+0xac/0x134) [<c02fb798>] (vfs_write+0xac/0x134) from [<c02fb8cc>] (sys_write+0x3c/0x68) [<c02fb8cc>] (sys_write+0x3c/0x68) from [<c027c700>] (ret_fast_syscall+0x0/0x2c) ---[ end trace 88289eceb4675b04 ]--- This patch fix the problem by adding the power on opertion back for uart console when console_suspend_enabled is true. Signed-off-by: Ning Jiang <ning.jiang@marvell.com> Tested-by: Mayank Rana <mrana@codeaurora.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22serial: mfd: Initconst section fixesAndi Kleen1-1/+1
Cc: gregkh@suse.de Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22keyboard: Do not include <linux/irq.>Geert Uytterhoeven1-1/+2
The top of <linux/irq.h> has this comment: * Please do not include this file in generic code. There is currently * no requirement for any architecture to implement anything held * within this file. * * Thanks. --rmk Remove inclusion of <linux/irq.>, to prevent the following compile error from happening soon: | include/linux/irq.h:132: error: redefinition of ‘struct irq_data’ | include/linux/irq.h:286: error: redefinition of ‘struct irq_chip’ drivers/tty/vt/keyboard.c needs to include <asm/irq_regs.h> for get_irq_regs(): | drivers/tty/vt/keyboard.c:497: error: implicit declaration of function ‘get_irq_regs’ | drivers/tty/vt/keyboard.c:497: warning: initialization makes pointer from integer without a cast Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22TTY: serial, move 68360 driver to stagingJiri Slaby3-2997/+0
This driver has been broken at least since 2008. At that time, a88487c79b (Fix compile errors in SGI console drivers) broke this driver completely. And since nobody noticed for the past 3 years, move it into staging. I think this will rot there and we will throw it away completely after some time. Or maybe someone will volunteer to fix it ;). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22cris: lower the printk level in cris serial driverWANG Cong1-6/+6
KERN_CRIT is too high, replace those KERN_CRIT with KERN_ERR or KERN_WARNING. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22serial: Support the EFR-register of XR1715x uarts.Søren Holm2-1/+52
The EFR (Enhenced-Features-Register) is located at a different offset than the other devices supporting UART_CAP_EFR. This change add a special setup quick to set UPF_EXAR_EFR on the port. UPF_EXAR_EFR is then used to the port type to PORT_XR17D15X since it is for sure a XR17D15X uart. Signed-off-by: Søren Holm <sgh@sgh.dk> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 12:41:15 +0000