summaryrefslogtreecommitdiffstats
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds8-29/+29
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-09Merge tag 'acpi-part2-4.16-rc1' of ↵Linus Torvalds1-10/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups, a few new quirks, a couple of updates related to the handling of ACPI tables and ACPICA copyrights refreshment. Specifics: - Update the ACPICA kernel code to upstream revision 20180105 including: * Assorted fixes (Jung-uk Kim) * Support for X32 ABI compilation (Anuj Mittal) * Update of ACPICA copyrights to 2018 (Bob Moore) - Prepare for future modifications to avoid executing the _STA control method too early (Hans de Goede) - Make the processor performance control library code ignore _PPC notifications if they cannot be handled and fix up the C1 idle state definition when it is used as a fallback state (Chen Yu, Yazen Ghannam) - Make it possible to use the SPCR table on x86 and to replace the original IORT table with a new one from initrd (Prarit Bhargava, Shunyong Yang) - Add battery-related quirks for Asus UX360UA and UX410UAK and add quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai Heng Feng) - Address static checker warnings in the CPPC code (Gustavo Silva) - Avoid printing a raw pointer to the kernel log in the smart battery driver (Greg Kroah-Hartman)" * tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: sbshc: remove raw pointer from printk() message ACPI: SPCR: Make SPCR available to x86 ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit ACPI / tables: Add IORT to injectable table list ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530 ACPICA: Update version to 20180105 ACPICA: All acpica: Update copyrights to 2018 ACPI / processor: Set default C1 idle state description ACPI / battery: Add quirk for Asus UX360UA and UX410UAK ACPI: processor_perflib: Do not send _PPC change notification if not ready ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs ACPI / bus: Do not call _STA on battery devices with unmet dependencies PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status ACPI: export acpi_bus_get_status_handle() ACPICA: Add a missing pair of parentheses ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR() ACPICA: Avoid NULL pointer arithmetic ACPICA: Linux: add support for X32 ABI compilation ACPI / video: Use true for boolean value
2018-02-07ACPI: SPCR: Make SPCR available to x86Prarit Bhargava1-10/+5
SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup an early console. General fixes include updating Documentation & Kconfig (for x86), updating comments, and changing parse_spcr() to acpi_parse_spcr(), and earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be more descriptive. On x86, many systems have a valid SPCR table but the table version is not 2 so the table version check must be a warning. On ARM64 when the kernel parameter earlycon is used both the early console and console are enabled. On x86, only the earlycon should be enabled by by default. Modify acpi_parse_spcr() to allow options for initializing the early console and console separately. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mark Salter <msalter@redhat.com> Tested-by: Mark Salter <msalter@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-02-01Merge tag 'tty-4.16-rc1' of ↵Linus Torvalds32-330/+460
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/staging driver updates from Greg KH: "Here is the big tty/serial driver update for 4.16-rc1. The usual number of various serial driver fixes and updates to try to get them to work with crazy hardware configurations (seriously, how many different ways are hardware engineers going to come up with to hook up a simple UART?) There is also some serdev bugfixes and updates, as well as a smattering of other small fixes in here. All have been in the linux-next tree for a while, with no reported issues" * tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits) tty: serial: exar: Relocate sleep wake-up handling tty: fix data race between tty_init_dev and flush of buf serial: imx: fix endless loop during suspend serial: core: mark port as initialized after successful IRQ change serdev: only match serdev devices serdev: do not generate modaliases for controllers serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction serial: 8250_dw: Revert "Improve clock rate setting" MAINTAINERS: Add myself as designated reviewer for 8250_dw gpio: serial: max310x: Support open-drain configuration for GPIOs serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers serial: 8250_ingenic: Parse earlycon options serial: 8250_ingenic: Add support for the JZ4770 SoC serial: core: Make uart_parse_options take const char* argument serial: 8250_of: fix return code when probe function fails to get reset serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS serial: 8250_uniphier: fix error return code in uniphier_uart_probe() tty: n_gsm: Allow ADM response in addition to UA for control dlci tty: omap-serial: Fix initial on-boot RTS GPIO level tty: serial: jsm: Add one check against NULL pointer dereference ...
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-0/+36
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds6-16/+16
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-29Merge tag 'mfd-next-4.16' of ↵Linus Torvalds1-2/+29
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for RAVE Supervisory Processor Moved drivers: - Move Realtek Card Reader Driver to Misc New Device Support: - Add support for Pinctrl to axp20x New Functionality: - Add resume support to atmel-flexcom Fix-ups: - Split MFD (mfd) and userspace handlers (platform) in cros_ec - Fix trivial (whitespace, spelling) issue(s) in pcf50633-core - Clean-up error handling in ab8500-debugfs - General tidying up in tmio_core - Kconfig fix-ups for qcom-pm8xxx - Licensing changes (SPDX) to stm32-lptimer, stm32-timers - Device Tree fixups in mc13xxx - Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc, kempld-core, intel_soc_pmic_core.c, ab8500-debugfs" * tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits) mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro atmel_flexcom: Support resuming after a chip reset mfd: Remove duplicate includes dt-bindings: mfd: mc13xxx: Add the unit address to sysled mfd: stm32: Adopt SPDX identifier mfd: axp20x: Add pinctrl cell for AXP813 mfd: pm8xxx: Make elegible for COMPILE_TEST mfd: kempld-core: Use resource_size function on resource object mfd: tmio: Move register macros to tmio_core.c mfd: cros ec: spi: Simplify delay handling between SPI messages mfd: palmas: Assign the right powerhold mask for tps65917 mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers() mfd: ti_am335x_tscadc: Remove redundant assignment to node mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed' dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver watchdog: Add RAVE SP watchdog driver mfd: Add driver for RAVE Supervisory Processor serdev: Introduce devm_serdev_device_open() ...
2018-01-25tty: serial: exar: Relocate sleep wake-up handlingAaron Sierra2-30/+30
Exar sleep wake-up handling has been done on a per-channel basis by virtue of INT0 being accessible from each channel's address space. I believe this was initially done out of necessity, but now that Exar devices have their own driver, we can do things more efficiently by registering a dedicated INT0 handler at the PCI device level. I see this change providing the following benefits: 1. If more than one port is active, eliminates the redundant bus cycles for reading INT0 on every interrupt. 2. This note associated with hooking in the per-channel handler in 8250_port.c is resolved: /* Fixme: probably not the best place for this */ Cc: Matt Schulte <matts@commtech-fastcom.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-23serdev: add method to set parityUlrich Hecht2-0/+36
Adds serdev_device_set_parity() and an implementation for ttyport. The interface uses an enum with the values SERIAL_PARITY_NONE, SERIAL_PARITY_EVEN and SERIAL_PARITY_ODD. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-23tty: fix data race between tty_init_dev and flush of bufGaurav Kohli2-3/+9
There can be a race, if receive_buf call comes before tty initialization completes in n_tty_open and tty->disc_data may be NULL. CPU0 CPU1 ---- ---- 000|n_tty_receive_buf_common() n_tty_open() -001|n_tty_receive_buf2() tty_ldisc_open.isra.3() -002|tty_ldisc_receive_buf(inline) tty_ldisc_setup() Using ldisc semaphore lock in tty_init_dev till disc_data initializes completely. Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org> Reviewed-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-22serial: imx: fix endless loop during suspendMartin Kaiser1-17/+15
Before we go into suspend mode, we enable the imx uart's interrupt for the awake bit in the UART Status Register 1. If, for some reason, the awake bit is already set before we enter suspend mode, we get an interrupt immediately when we enable interrupts for awake. The uart's clk_ipg is disabled at this point (unless there's an ongoing transfer). We end up in the interrupt handler, which usually tries to clear the awake bit. This doesn't work with the clock disabled. Therefore, we keep getting interrupts forever, resulting in an endless loop. Clear the awake bit before setting the awaken bit to signal that we want an imx interrupt when the awake bit will be set. This ensures that we're not woken up by events that happened before we started going into suspend mode. Change the clock handling so that suspend prepares and enables the clock and suspend_noirq disables it. Revert these operations in resume_noirq and resume. With these preparations in place, we can now modify awake and awaken in the suspend function when the actual imx interrupt is disabled and the required clk_ipg is active. Update the thaw and freeze functions to use the new clock handling since we share the suspend_noirq function between suspend and hibernate. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-22serial: core: mark port as initialized after successful IRQ changeSebastian Andrzej Siewior1-0/+2
setserial changes the IRQ via uart_set_info(). It invokes uart_shutdown() which free the current used IRQ and clear TTY_PORT_INITIALIZED. It will then update the IRQ number and invoke uart_startup() before returning to the caller leaving TTY_PORT_INITIALIZED cleared. The next open will crash with | list_add double add: new=ffffffff839fcc98, prev=ffffffff839fcc98, next=ffffffff839fcc98. since the close from the IOCTL won't free the IRQ (and clean the list) due to the TTY_PORT_INITIALIZED check in uart_shutdown(). There is same pattern in uart_do_autoconfig() and I *think* it also needs to set TTY_PORT_INITIALIZED there. Is there a reason why uart_startup() does not set the flag by itself after the IRQ has been acquired (since it is cleared in uart_shutdown)? Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-22serdev: only match serdev devicesJohan Hovold1-0/+8
Only serdev devices (a.k.a. clients or slaves) are bound to drivers so bail out early from match() in case the device is not a serdev device (i.e. if it's a serdev controller). Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-22serdev: do not generate modaliases for controllersJohan Hovold1-38/+34
Serdev controllers are not bound to any drivers and it therefore makes no sense to generate modaliases for them. This has already been fixed separately for ACPI controllers for which uevent errors were also being logged during probe due to the missing ACPI companions (from which ACPI modaliases are generated). This patch moves the modalias handling from the bus type to the client device type. Specifically, this means that only serdev devices (a.k.a. clients or slaves) will have have MODALIAS fields in their uevent environments and corresponding modalias sysfs attributes. Also add the missing static keyword for the modalias device attribute when moving the definition. Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-22serial: mxs-auart: don't use GPIOF_* with gpiod_get_directionWolfram Sang1-2/+1
The documentation was wrong, gpiod_get_direction() returns 0/1 instead of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47 ("gpio: correct docs about return value of gpiod_get_direction"). Now, fix this user (until a better, system-wide solution is in place). This also means we can drop the deprecated use of 'linux/gpio.h'. Yay! Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-22serial: 8250_dw: Revert "Improve clock rate setting"Andy Shevchenko1-18/+12
The commit de9e33bdfa22 ("serial: 8250_dw: Improve clock rate setting") obviously tries to cure symptoms, and not a root cause. The root cause is the non-flexible rate calculation inside the corresponding clock driver. What we need is to provide maximum UART divisor value to the clock driver to allow it do the job transparently to the caller. Since from the initial commit message I have got no clue which clock driver actually needs to be amended, I leave this exercise to the people who know better the case. Moreover, it seems [1] the fix introduced a regression. And possible even one more [2]. Taking above, revert the commit de9e33bdfa22 for now. [1]: https://www.spinics.net/lists/linux-serial/msg28872.html [2]: https://github.com/Dunedan/mbp-2016-linux/issues/29#issuecomment-357583782 Fixes: de9e33bdfa22 ("serial: 8250_dw: Improve clock rate setting") Cc: stable <stable@vger.kernel.org> # 4.15 Cc: Ed Blake <ed.blake@sondrel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09gpio: serial: max310x: Support open-drain configuration for GPIOsJan Kundrát1-0/+22
The push-pull vs. open-drain are the only supported output modes. The inputs are always unconditionally equipped with weak pull-downs. That's the only mode, so there's probably no point in exporting that. I wonder if it's worthwhile to provide a custom dbg_show method to indicate the current status of the outputs, though. This patch and [1] for i2c-gpio together make it possible to bit-bang an I2C bus over GPIOs of an UART which is connected via SPI :). Yes, this is crazy, but it's fast enough (while on a 26Mhz SPI HW bus with a dual-core 1.6GHz CPU) to drive an I2C bus at 200kHz, according to my scope. [1] https://patchwork.ozlabs.org/patch/852591/ Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllersHans de Goede1-0/+5
ACPI enumerated serdev-controllers do not have an ACPI companion, the ACPI companion belongs to the serdev-device child of the serdev-controller, not to the controller itself. This was causing serdev_uevent to always return -ENODEV when called on a serdev-controller leading to errors like these: kernel: serial serial0: uevent: failed to send synthetic uevent being logged. This commit modifies serdev_uevent to directly return 0 when called on an ACPI enumerated serdev-controller fixing this. Note: I do not think that setting a modalias on a devicetree enumerated serdev-controller makes sense either. So perhaps the !dev->of_node part of the check can be dropped too, but I'm not entirely sure that doing this on devicetree too is correct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09serial: 8250_ingenic: Parse earlycon optionsPaul Cercueil1-2/+10
In the devicetree, it is possible to specify the baudrate, parity, bits, flow of the early console, by passing a configuration string like this: aliases { serial0 = &uart0; }; chosen { stdout-path = "serial0:57600n8"; }; This, for instance, will configure the early console for a baudrate of 57600 bps, no parity, and 8 bits per baud. This patches implements parsing of this configuration string in the 8250_ingenic driver, which previously just ignored it. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09serial: 8250_ingenic: Add support for the JZ4770 SoCPaul Cercueil1-0/+5
The JZ4770 SoC's UART is no different from the other JZ SoCs, so this commit simply adds the ingenic,jz4770-uart compatible string. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09serial: core: Make uart_parse_options take const char* argumentPaul Cercueil1-2/+3
The pointed string is never modified from within uart_parse_options, so it should be marked as const in the function prototype. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09serial: 8250_of: fix return code when probe function fails to get resetMasahiro Yamada1-1/+4
The error pointer from devm_reset_control_get_optional_shared() is not propagated. One of the most common problem scenarios is it returns -EPROBE_DEFER when the reset controller has not probed yet. In this case, the probe of the reset consumer should be deferred. Fixes: e2860e1f62f2 ("serial: 8250_of: Add reset support") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTSFabio Estevam1-6/+8
The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS lines, so only allow such wakeup method when the system actually has RTS/CTS support. Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Martin Kaiser <martin@kaiser.cx> Acked-by: Fugang Duan <fugang.duan@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09serial: 8250_uniphier: fix error return code in uniphier_uart_probe()Wei Yongjun1-2/+3
Fix to return a negative error code from the port register error handling case instead of 0, as done elsewhere in this function. Fixes: 39be40ce066d ("serial: 8250_uniphier: fix serial port index in private data") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09tty: n_gsm: Allow ADM response in addition to UA for control dlciTony Lindgren1-3/+14
Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09tty: omap-serial: Fix initial on-boot RTS GPIO levelRafael Gago1-4/+3
The rs485 flag "SER_RS485_RTS_AFTER_SEND" was wrongly read from the GPIO flags. This caused the RTS pin to be high during boot. Signed-off-by: Rafael Gago Castano <rgc@hms.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09tty: serial: jsm: Add one check against NULL pointer dereferenceGuilherme G. Piccoli1-0/+3
All calls to neo_copy_data_from_uart_to_queue() are safeguarded against NULL dereference of its parameter, except the one that this patch changes. That said, let's play safe and check for NULL in this case too. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09tty: serial: jsm: Remove unnecessary NULL checksGuilherme G. Piccoli2-9/+0
After inspection made by Markus using Coccinelle software, he observed that we could possibly be triggering a NULL pointer dereference in 2 functions [0]. After discussion in mailing list, it was observed in fact we have two unnecessary checks for NULL pointer, and they were leading to Coccinelle warn. So, instead of reworking the code as proposed by him, we hereby remove the unnecessary checks, and also some unneeded extra lines in the code. These two unnecessary NULL checks were tracked in the call chain as never NULL, so they can be safely removed. No functional changes are intended. [0] https://lkml.org/lkml/2017/11/29/705 Suggested-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09treewide: Use DEVICE_ATTR_RWJoe Perches1-1/+1
Convert DEVICE_ATTR uses to DEVICE_ATTR_RW where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(\s*S_IRUGO\s*\|\s*S_IWUSR|\s*S_IWUSR\s*\|\s*S_IRUGO\s*|\s*0644\s*)\)?\s*,\s*\1_show\s*,\s*\1_store\s*\)/DEVICE_ATTR_RW(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08serdev: Introduce devm_serdev_device_open()Andrey Smirnov1-0/+27
Add code implementing managed version of serdev_device_open() for serdev device drivers that "open" the device during driver's lifecycle only once (e.g. opened in .probe() and closed in .remove()). Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08serdev: Make .remove in struct serdev_device_driver optionalAndrey Smirnov1-2/+2
Using devres infrastructure it is possible to write a serdev driver that doesn't have any code that needs to be called as a part of .remove. Add code to make .remove optional. Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-02Merge 4.15-rc6 into tty-nextGreg Kroah-Hartman1-2/+2
We want the ldisc fix here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-21n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)Linus Torvalds1-2/+2
We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") and the intent was to allow it to override some (all?) ICANON behavior. Quoting from that original commit message: There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. but the problem turns out that "several aspects of the terminal driver are disabled" is a bit ambiguous, and you can really confuse the n_tty layer by setting EXTPROC and then causing some of the ICANON invariants to no longer be maintained. This fixes at least one such case (TIOCINQ) becoming unhappy because of the confusion over whether ICANON really means ICANON when EXTPROC is set. This basically makes TIOCINQ match the case of read: if EXTPROC is set, we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC changes, not just if ICANON changes. Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzkaller <syzkaller@googlegroups.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19pty: cancel pty slave port buf's work in tty_releaseSahara1-0/+2
In case that CONFIG_SLUB_DEBUG is on and pty is used, races between release_one_tty and flush_to_ldisc work threads may happen and lead to use-after-free condition on tty->link->port. Because SLUB_DEBUG is turned on, freed tty->link->port is filled with POISON_FREE value. So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc could return without a problem by checking if tty is NULL. CPU 0 CPU 1 ----- ----- release_tty pty_write cancel_work_sync(tty) to = tty->link tty_kref_put(tty->link) tty_schedule_flip(to->port) << workqueue >> ... release_one_tty ... pty_cleanup ... kfree(tty->link->port) << workqueue >> flush_to_ldisc tty = READ_ONCE(port->itty) tty is 0x6b6b6b6b6b6b6b6b !!PANIC!! access tty->ldisc Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93 pgd = ffffffc0eb1c3000 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000 ------------[ cut here ]------------ Kernel BUG at ffffff800851154c [verbose debug info unavailable] Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G W 3.18.31-g0a58eeb #1 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT) Workqueue: events_unbound flush_to_ldisc task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000 PC is at ldsem_down_read_trylock+0x0/0x4c LR is at tty_ldisc_ref+0x24/0x4c pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145 sp : ffffffc0ed627cd0 x29: ffffffc0ed627cd0 x28: 0000000000000000 x27: ffffff8009e05000 x26: ffffffc0d382cfa0 x25: 0000000000000000 x24: ffffff800a012f08 x23: 0000000000000000 x22: ffffffc0703fbc88 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93 x19: 0000000000000000 x18: 0000000000000001 x17: 00e80000f80d6f53 x16: 0000000000000001 x15: 0000007f7d826fff x14: 00000000000000a0 x13: 0000000000000000 x12: 0000000000000109 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580 x7 : 0000000000000000 x6 : ffffff800a42e000 x5 : 00000000000003fc x4 : 0000000003bd1201 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93 Signed-off-by: Sahara <keun-o.park@darkmatter.ae> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19serial: max310x: Reduce RX work starvationJan Kundrát1-13/+10
Prior to this patch, the code would happily trigger TX on some ports before having a chance of reading the RX buffer from the rest of them. When no flow control was used, this led to RX buffer overruns and therefore lost data under certain circumstances. I was able to reproduce this with MAX14830 (that's a quad channel one) and a simple daisy-chain of RX and TX ports on the eval board: - TX0 -> RX1 - TX1 -> RX2 - TX2 -> RX3 - TX3 -> RX0 I was testing this by transferring 2MB of data at 115200 baud via each port. I used a Solidrun Clearfog Base (Armada 388) which was talking to the UART over an SPI bus clocked at 26MHz (the chip's maximum). Without this patch, I would always get a "Possible RX FIFO overrun" in dmesg, and fewer-than-expected amount of bytes received over ttyMAX0. Results on ttyMAX{1,2,3} tended to be correct all the time, even without the previous patches in this series and with PIO SPI transfers ("indirect mode" as the Marvell datasheet calls it), so I assume that heavy congestion is needed in order to reproduce this. A drawback of this patch is that the throughput gets reduced "a bit". Previously, a 115200 baud resulted in about 11.2kBps throughput as reported by a simple `pv`. With this patch, the throughput of four parallel streams is roughly 7kBps each, and 9kBps for three streams. There is no slowdown for one or two parallel streams. Situation is worse if bytes are being read one-by-one (such as if the userspace wants to perform parity/framing/break checking) and therefore without the batched reads. With just this patch and no other modifications on top of 4.14, I was only getting roughly 3.6kBps with four parallel streams. The single-stream performance was the same, and I was seeing about 7.2kBps with two parallel streams. `perf top` said that a substantial amount of time was spent in `finish_task_switch`, `_raw_spin_unlock_irqrestore` and `__timer_delay`. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19serial: max310x: Use batched reads when reasonably safeJan Kundrát1-40/+86
The hardware has a 128 byte RX FIFO buffer for each independent UART. Previously, the code was always reading that byte-by-byte via independent SPI transactions and the associated overhead. In practice, this led to up to eight bytes over SPI for just one byte in the UART's RX FIFO: - reading the global IRQ register (two bytes, one for command, the other for data) - reading one UART's ISR (again two bytes) - reading the byte count (two bytes yet again) - finally, reading one byte of the FIFO via another two-byte transaction We cannot always use a batched read. If the TTY is set to intercept break conditions or report framing or parity errors, then it is required to check the Line Status Register (LSR) for each byte which is read from the RX FIFO. The documentation does not show a way of doing that in a single SPI transaction; registers 0x00 and 0x04 are separate. In my testing, this is no silver bullet. I was feeding 2MB of random data over four daisy-chaned UARTs of MAX14830, and this is the distribution that I was getting: - R <= 1: 7437322 - R <= 2: 162093 - R <= 4: 4093 - R <= 8: 4196 - R <= 16: 645 - R <= 32: 165 - R <= 64: 58 - R <= 128: 0 For a reference, batching the write operations works much better: - W <= 1: 2664 - W <= 2: 1305 - W <= 4: 627 - W <= 8: 371 - W <= 16: 121 - W <= 32: 68 - W <= 64: 33 - W <= 128: 63139 That's probably because this HW/SW combination (Clearfog Base, Armada 388) is probably "good enough" to react to the chip's IRQ "fast enough" most of the time. Still, I was getting RX overruns every now and then. In future, I plan to improve this by letting the RX FIFO be filled a little more (the chip has support for that and also for a "stale timeout" to prevent additional starvation). Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19serial: max310x: use a batch write op for UART transmitJan Kundrát1-7/+29
The transmit register supports batched writes. The key is simply to keep sending additional bytes up to the FIFO size in the same SPI transaction with the CS pin still being held low. This duplicates the regmap infrastructure to a certain extent. There are some provisions for multiple writes in there, but there does not appear to be any support for those writes which are destined to the *same* register (and also no standard for SPI bus transfers of these, anyway). This patch does not solve every case (if the UART xmit circular buffer wraps around, we're still doing two SPI transactions), but at least it's not one-byte-per-transaction anymore. This change does not touch the receive path at this time. Doing that in the generic case appears to be impossible in the general case, because the chips' status register contains data about the *current* byte in the HW's Rx FIFO. We cannot read these two registers in one go, unfortunately. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19serial: max310x: Support IRQ sharing with other devicesJan Kundrát1-6/+14
According to my chip's datasheet [1], the IRQ output is an open collector pin which is suitable for sharing with other chips. The chip also has a register which indicates which UART performed a change and the driver checks that register already, so we have everything what is needed to effectively share the IRQ GPIO. [1] https://datasheets.maximintegrated.com/en/ds/MAX14830.pdf Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19serial: max310x: Do not hard-code the IRQ typeJan Kundrát1-5/+3
As suggested by Russell King, a driver should not really care about bits such as the interrupt polarity or whether it is edge- or level- triggered. The reasons for that include: - an upstream IRQ controller which cannot support edge- or level-triggered interrupts, - board design with a built-in inverter The interrupt type is being already specified by the Device Tree, anyway. Other drivers (gpio/gpio-tc3589x.c for example) already work in this way, delegating the proper IRQ line setup to the DT and not specifying anything by hand. Also, there's no reason to have the IRQ flags split between two places. The SPI probing is the only entry point anyway. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18serdev: ttyport: do not used keyed wakeup in write_wakeupJohan Hovold1-1/+2
Serdev does not use the file abstraction and specifically there will never be anyone polling a file descriptor for POLLOUT events. Just use plain wake_up_interruptible() in the write_wakeup callback and document why it's there. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18tty: serial: sh-sci: Add default for number of ports for compile-testingGeert Uytterhoeven1-0/+1
When compile-testing an allmodconfig kernel for a platform without sh-sci serial ports, the SERIAL_SH_SCI_NR_UARTS symbol of type "int" doesn't get assigned a numerical default value, but an empty string, leading to a build failure: .config:3814:warning: symbol value '' invalid for SERIAL_SH_SCI_NR_UARTS ... make[3]: *** [silentoldconfig] Error 1 Fix this by explicitly providing a default value of 2, like before. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: f6731485a51978ca ("tty: serial: sh-sci: Hide number of ports config question") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15serial: max310x: Fix invalid memory access during GPIO initJan Kundrát1-17/+17
The `max310x_spi_probe` function attempted to setup the GPIO bits before the corresponding structs for each serial port were initialized. If the DTS file specified a GPIO hog, this led to a crash because the GPIO stack ended up calling `max310x_gpio_direction_output` which referenced uninitialized memory: [<c04598c0>] (max310x_gpio_direction_output) from [<c03f5a2c>] (_gpiod_direction_output_raw+0x94/0x2d4) [<c03f5a2c>] (_gpiod_direction_output_raw) from [<c03f991c>] (gpiod_hog+0x6c/0x154) [<c03f991c>] (gpiod_hog) from [<c03fa2d8>] (of_gpiochip_add+0x28c/0x444) [<c03fa2d8>] (of_gpiochip_add) from [<c03f6b2c>] (gpiochip_add_data+0x4f8/0x760) [<c03f6b2c>] (gpiochip_add_data) from [<c03f6dd4>] (devm_gpiochip_add_data+0x40/0x7c) [<c03f6dd4>] (devm_gpiochip_add_data) from [<c0459fec>] (max310x_spi_probe+0x530/0x894) [<c0459fec>] (max310x_spi_probe) from [<c0503294>] (spi_drv_probe+0x7c/0xac) [<c0503294>] (spi_drv_probe) from [<c046628c>] (driver_probe_device+0x234/0x2e8) [<c046628c>] (driver_probe_device) from [<c0464890>] (bus_for_each_drv+0x60/0x94) [<c0464890>] (bus_for_each_drv) from [<c0465f78>] (__device_attach+0xb0/0x114) [<c0465f78>] (__device_attach) from [<c0465548>] (bus_probe_device+0x84/0x8c) [<c0465548>] (bus_probe_device) from [<c0463a00>] (device_add+0x3f4/0x580) [<c0463a00>] (device_add) from [<c0504164>] (spi_add_device+0x9c/0x134) [<c0504164>] (spi_add_device) from [<c0504c18>] (spi_register_controller+0x484/0x910) [<c0504c18>] (spi_register_controller) from [<c0506ee0>] (orion_spi_probe+0x2f4/0x3b4) [<c0506ee0>] (orion_spi_probe) from [<c0467dac>] (platform_drv_probe+0x50/0xb0) [<c0467dac>] (platform_drv_probe) from [<c046628c>] (driver_probe_device+0x234/0x2e8) [<c046628c>] (driver_probe_device) from [<c04663f8>] (__driver_attach+0xb8/0xbc) [<c04663f8>] (__driver_attach) from [<c04647e8>] (bus_for_each_dev+0x68/0x9c) [<c04647e8>] (bus_for_each_dev) from [<c046574c>] (bus_add_driver+0x104/0x210) [<c046574c>] (bus_add_driver) from [<c0466f14>] (driver_register+0x78/0xf4) [<c0466f14>] (driver_register) from [<c0101bdc>] (do_one_initcall+0x44/0x168) [<c0101bdc>] (do_one_initcall) from [<c0a00dc0>] (kernel_init_freeable+0x140/0x1cc) [<c0a00dc0>] (kernel_init_freeable) from [<c078c590>] (kernel_init+0x8/0x108) [<c078c590>] (kernel_init) from [<c0107a50>] (ret_from_fork+0x14/0x24) This can be easily fixed by moving the corresponding code below. And because the UARTs are already there by the time we reach this point, the `goto` needs changing so that more stuff is freed. (I have not tested this error path.) Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15tty: serial: mxs-auart: fix error handling in mxs_auart_probeBranislav Radocaj1-2/+6
If uart_add_one_port() fails in mxs_auart_probe, the clks has to be disabled.Two clks are previously enabled in mxs_get_clks(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Branislav Radocaj <branislav@radocaj.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15tty: goldfish: Enable 'earlycon' only if built-inSebastian Andrzej Siewior2-1/+7
Commit 3840ed9548f7 ("tty: goldfish: Implement support for kernel 'earlycon' parameter") breaks an allmodconfig config on x86: | LD vmlinux.o | MODPOST vmlinux.o |drivers/tty/serial/earlycon.o: In function `parse_options': |drivers/tty/serial/earlycon.c:97: undefined reference to `uart_parse_earlycon' |Makefile:1005: recipe for target 'vmlinux' failed earlycon.c::parse_options() invokes uart_parse_earlycon() from serial_core.c which is compiled=m because GOLDFISH_TTY itself (and most others) are =m. To avoid that, I'm adding the _CONSOLE config option which is selected if the GOLDFISH module itself is =y since it doesn't need the early bits for the =m case (other drivers do the same dance). The alternative would be to move uart_parse_earlycon() from serial_core.c to earlycon.c (we don't have that many users of that function). Fixes: 3840ed9548f7 ("tty: goldfish: Implement support for kernel 'earlycon' parameter") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Miodrag Dinic <miodrag.dinic@mips.com> Acked-by: Miodrag Dinic <miodrag.dinic@mips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15serial: 8250: 8250_omap: Fix spelling error.Rolf Evers-Fischer1-1/+1
Fixed a spelling error in a comment. Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15serial: 8250_dw: Disable clock on errorStefan Potyra1-1/+2
If there is no clock rate for uartclk defined, disable the previously enabled clock again. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 23f5b3fdd04e serial: 8250_dw: only get the clock rate in one place Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15serial: stm32: fix name conflict with 8250Ludovic Barre1-1/+1
This patch replaces stm32 tty name ttyS by ttySTM to avoid a name conflict when Serial: 8250/16550 driver is activated. sysfs: cannot create duplicate filename '/class/tty/ttyS3' Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-12903-gb392521-dirty #1 [<c03118dc>] (unwind_backtrace) from [<c030c950>] (show_stack+0x10/0x14) [<c030c950>] (show_stack) from [<c0d31e18>] (dump_stack+0x90/0xa4) [<c0d31e18>] (dump_stack) from [<c03430a0>] (__warn+0xf8/0x110) [<c03430a0>] (__warn) from [<c03430f0>] (warn_slowpath_fmt+0x38/0x48) [<c03430f0>] (warn_slowpath_fmt) from [<c04ce574>] (sysfs_warn_dup+0x68/0x78) [<c04ce574>] (sysfs_warn_dup) from [<c04ce824>] (sysfs_do_create_link_sd+0xb4/0xc4) [<c04ce824>] (sysfs_do_create_link_sd) from [<c08c60ec>] (device_add+0x204/0x574) [<c08c60ec>] (device_add) from [<c07a7ddc>] (tty_register_device_attr+0xc8/0x1bc) [<c07a7ddc>] (tty_register_device_attr) from [<c07c6530>] (uart_add_one_port+0x22c/0x4f4) Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15tty/isicom: Fix a possible sleep-in-atomic bug in WaitTillCardIsFreeJia-Ju Bai1-5/+1
The driver may sleep under a spinlock. The function call paths are: isicom_activate (acquire the spinlock) isicom_setup_board drop_dtr_rts WaitTillCardIsFree msleep --> may sleep isicom_set_termios isicom_config_port drop_dtr WaitTillCardIsFree msleep --> may sleep isicom_tiocmset drop_dtr WaitTillCardIsFree msleep --> may sleep Though "in_atomic" is used to check atomic context, but it is not recommended to use in driver code (see include/linux/preempt.h). To fix it, only using mdelay instead. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15tty: serial: sh-sci: Hide DMA config questionGeert Uytterhoeven1-1/+2
On most Renesas ARM platforms, the SCIF serial ports can be used with DMA, so most users will want DMA support to be enabled. On SuperH platforms, SCI(F) serial ports cannot be used with DMA yet (see also commit 219fb0c1436e4893 ("serial: sh-sci: Remove the platform data dma slave rx/tx channel IDs")), so users will want it disabled to reduce kernel size. Hence follow the above rationale to configure the default, unless CONFIG_EXPERT is enabled. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 20:50:46 +0000